11be35a165
To do so, a few dependencies have been imported: * external/bsd/lutok * external/mit/lua * external/public-domain/sqlite * external/public-domain/xz The Kyua framework is the new generation of ATF (Automated Test Framework), it is composed of: * external/bsd/atf * external/bsd/kyua-atf-compat * external/bsd/kyua-cli * external/bsd/kyua-tester * tests Kyua/ATF being written in C++, it depends on libstdc++ which is provided by GCC. As this is not part of the sources, Kyua is only compiled when the native GCC utils are installed. To install Kyua do the following: * In a cross-build enviromnent, add the following to the build.sh commandline: -V MKBINUTILS=yes -V MKGCCCMDS=yes WARNING: At this point the import is still experimental, and not supported on native builds (a.k.a make build). Change-Id: I26aee23c5bbd2d64adcb7c1beb98fe0d479d7ada
240 lines
10 KiB
Text
240 lines
10 KiB
Text
|
|
CURSES TESTFRAME
|
|
----------------
|
|
|
|
1. Introduction
|
|
|
|
The curses library is a complex piece of software and, often, changes
|
|
made to the library may introduce subtle bugs that are hidden by other
|
|
actions so a visual check of the curses output may look correct in
|
|
some circumstances and the bug only show itself after a certain
|
|
sequence of actions. To assist with validating that changes made to
|
|
the curses library have no undesired effects an automated test is
|
|
needed to detect and highlight any changes in the curses application
|
|
output stream. The programmer can then analyse the output changes and
|
|
either correct a bug or update the automated test to accept the new
|
|
output as valid.
|
|
|
|
2. Architecture
|
|
|
|
The curses testframe consists of two separate programs connected by a
|
|
number of pipes and a pseudo-tty (pty). The programs are called the
|
|
director and the slave. The director reads a configuration file of
|
|
tests to perform, passes these commands to the slave over a pipe and
|
|
reads the pty for any output from the slave. Data from the slave is
|
|
compared against expected output held in a file and any differences
|
|
are highlighted to the tester. The slave is a curses application that
|
|
is forked by the director on start up. It reads commands from the
|
|
director over a pipe, these commands are calls to curses routines
|
|
along with the parameters required for the call. The slave takes the
|
|
parameters and uses them as arguments for the requested curses routine
|
|
call. The return value from the curses routine is passed back to the
|
|
director over another pipe, if the curses routine updates any passed
|
|
by reference arguments then these are also passed back to the director
|
|
for analysis.
|
|
|
|
3. Director
|
|
|
|
The director has the following optional command line options:
|
|
|
|
-v enables verbose output to assist debugging
|
|
-s slave_path the director will execute slave_path as the slave
|
|
process. The default is ./slave
|
|
-t term Sets the TERM environment variable to term when
|
|
executing the slave. The default is atf
|
|
|
|
There is one mandatory command line parameter, that is a file name
|
|
that contains the test command file. The test command file holds the
|
|
calls required to exercise a particular curses routine and validate
|
|
both the return codes from the routines and the output from the
|
|
slave. The test language has a small number of commands, they are:
|
|
|
|
assign:
|
|
Assign a value to a variable. The syntax is:
|
|
|
|
assign var_name value
|
|
|
|
Where var_name is the name of the variable. Variable names are
|
|
an arbitrary sequence of alphanumeric characters, the variable
|
|
name must start with an alphabetic character. Value is the value
|
|
to be assigned. The value can either be a numeric or a string
|
|
type. Variables are created on first use and will be
|
|
overwritten on each subsequent use.
|
|
|
|
call, call2, call3, call4:
|
|
All these are used to call curses routines, the only difference
|
|
between then is the number of expected return values. Call
|
|
expects one return value, call2 expects 2, call3 expects 3 and
|
|
call4 expects four. Any parameters that are passed by reference
|
|
and updated by the call are treated like returns. So, for
|
|
example, calling the function getyx() which has three
|
|
parameters, the window, a pointer to storage for y and a pointer
|
|
to storage for x would be called like this:
|
|
|
|
call3 OK 4 5 getyx $win1
|
|
|
|
Which calls getyx, the first (and possibly only) return is the
|
|
return status of the function call, in this case we expect "OK"
|
|
indicating that the call succeeded. The next two returns are
|
|
the values of y and x respectively, the parameter $win1 is a
|
|
variable that was assigned by a previous call. Any return can
|
|
be assigned to a variable by including the variable name in a
|
|
call return list. Variables are referenced in a call parameter
|
|
list by prefixing the name with a $ character. All returns are
|
|
validated against the expected values and an error raised if
|
|
there is a mismatch. The only exception to this is when the
|
|
return is assigned to a variable. Valid values for the returns
|
|
list are:
|
|
|
|
variable - assign the return to the given variable
|
|
name.
|
|
numeric - the value of the return must match the
|
|
number given.
|
|
string - an arbitrary sequence of characters
|
|
enclosed in double quotes.
|
|
ERR - expect an ERR return
|
|
OK - expect an OK return
|
|
NULL - expect a NULL pointer return
|
|
NON_NULL - expect a pointer that is not NULL valued
|
|
|
|
There is one special parameter that can be passed to a call,
|
|
that is the label STDSCR. This parameter will be substituted by
|
|
the value of stdscr when the function call is made.
|
|
|
|
check:
|
|
Validate the value of a variable. This allows a variable to be
|
|
checked for an expected return after it has been assigned in a
|
|
previous call. The syntax is:
|
|
|
|
check var_name expected_result
|
|
|
|
Where var_name is a variable previously assigned and
|
|
expected_result is one of the valid return values listed in the
|
|
above call section.
|
|
|
|
compare:
|
|
Compares the output stream from the slave against the contents
|
|
of a file that contains the expected
|
|
output. The syntax is:
|
|
|
|
compare filename
|
|
|
|
Where filename is the name of the file containing the expected
|
|
output. The file can either be an absolute path or relative
|
|
path. In the latter case the value of the environment variable
|
|
CHECK_PATH will be prepended to the argument to provide the path
|
|
to the file. The contents of this file will be compared byte by
|
|
byte against the output from the slave, any differences in the
|
|
output will be flagged. If the director is not in verbose mode
|
|
then the first mismatch in the byte stream will cause the
|
|
director to exit.
|
|
|
|
comparend:
|
|
Performs the same function as the above compare except that
|
|
excess output from the slave is not discarded if there is more
|
|
data from the slave than there is in the check file. This
|
|
allows chaining of multiple check files.
|
|
|
|
delay:
|
|
Defines an inter-character delay to be inserted between
|
|
characters being fed into the input of the slave. The syntax
|
|
is:
|
|
|
|
delay time
|
|
|
|
Where time is the amount of time to delay in milliseconds.
|
|
|
|
include:
|
|
Include the contents of another test file, the parser will
|
|
suspend reading the current file and read commands from the
|
|
include file until the end of file of the include file is
|
|
reached at which point it will continue reading the original
|
|
file. Include files may be nested. The syntax is:
|
|
|
|
include filename
|
|
|
|
Where filename is the name of the file to include. If the
|
|
filename is not an absolute path then the contents of the
|
|
environment variable INCLUDE_PATH are prepended to the file
|
|
name.
|
|
|
|
input:
|
|
Defines a string of characters that will be fed to the slave
|
|
when a call requires input. Any unused input will be discarded
|
|
after the call that required the input is called. The syntax
|
|
is:
|
|
|
|
input "string to pass"
|
|
|
|
noinput:
|
|
Normally the director will error if an input function is called
|
|
without input being previously defined, this is to prevent input
|
|
functions causing the test to hang waiting for input that never
|
|
comes. If it is known that there is pending input for the slave
|
|
then the noinput keyword can be used to flag that the input
|
|
function has data available for it to read. The noinput command
|
|
only applies to the next function call then behaviour reverts to
|
|
the default.
|
|
|
|
The testframe can define different types of strings, the type of string
|
|
depends on the type of enclosing quotes. A null terminated string is
|
|
indicated by enclosing double (") quotes. A byte string, one that is
|
|
not null terminated and may contain the nul character within it is
|
|
indicated by enclosing single (') quotes. A string of chtype
|
|
character which are a combined attribute and character value is
|
|
indicated by enclosing backticks (`), for this type of string pairs of
|
|
bytes between the backticks are converted to an array of chtype, the
|
|
first byte is the attribute and the second is the character.
|
|
|
|
All strings defined will have a simple set of character substitutions
|
|
performed on them when they are parsed. This allows the tester to
|
|
embed some control characters into the string. Valid substitutions
|
|
are:
|
|
|
|
\e escape
|
|
\n new line
|
|
\t tab
|
|
\\ \ character
|
|
\nnn Where nnn is three octal digits, the character
|
|
represented by the octal number will be inserted into
|
|
the string.
|
|
|
|
Any other invalid conversions will have the \ stripped and the
|
|
subsequent characters inserted into the string.
|
|
|
|
Integers may be specified by either a plain numeric (e.g. 12345) or by
|
|
hexadecimal notation by prefixing the number with 0x (e.g. 0x3039).
|
|
Internally, no distinction is made between the two formats and they
|
|
can be freely intermixed.
|
|
|
|
Integers and variables containing integers can have operations
|
|
performed on them. Currently only bitwise ORing numbers together is
|
|
supported. This can be done by separating a list of integers and
|
|
variables with the pipe (|) symbol and enclosing the entire list in
|
|
round brackets "()" like this:
|
|
|
|
( $var1 | 0x0100 | $var2 | 512 )
|
|
|
|
Variables and integer constants may be freely intermixed. The result
|
|
of the operation can either be used as an argument for a call or can
|
|
be used as an expected result for a call.
|
|
|
|
In addition to all the curses calls being supported by the slave,
|
|
there is one more special call called "drain". This call repeatedly
|
|
called getch() until there are no more characters in stdin. The call
|
|
assumes that the curses input is either in no delay or timed input
|
|
mode otherwise the test will time out and fail. This call can be used
|
|
to clear any pending input when testing testing a timed read to
|
|
prevent the input being used in a later test.
|
|
|
|
4. Slave
|
|
|
|
The user has no direct interaction with the slave process. The slave
|
|
is forked off by the director communicates to the director over a set
|
|
of pipes and a pseudo-tty connected to its standard i/o file
|
|
descriptors. The slave executes the passed curses calls and passes
|
|
back return values to the director. The slave automatically calls
|
|
initscr() on start up.
|
|
|
|
|
|
|