b423d7b477
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL o PM signal handling logic should now work properly, even with debuggers being present o Asynchronous PM/VFS protocol, full IPC support for senda(), and AMF_NOREPLY senda() flag DETAILS Process stop and delay call handling of PM: o Added sys_runctl() kernel call with sys_stop() and sys_resume() aliases, for PM to stop and resume a process o Added exception for sending/syscall-traced processes to sys_runctl(), and matching SIGKREADY pseudo-signal to PM o Fixed PM signal logic to deal with requests from a process after stopping it (so-called "delay calls"), using the SIGKREADY facility o Fixed various PM panics due to race conditions with delay calls versus VFS calls o Removed special PRIO_STOP priority value o Added SYS_LOCK RTS kernel flag, to stop an individual process from running while modifying its process structure Signal and debugger handling in PM: o Fixed debugger signals being dropped if a second signal arrives when the debugger has not retrieved the first one o Fixed debugger signals being sent to the debugger more than once o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR protocol message o Detached debugger signals from general signal logic and from being blocked on VFS calls, meaning that even VFS can now be traced o Fixed debugger being unable to receive more than one pending signal in one process stop o Fixed signal delivery being delayed needlessly when multiple signals are pending o Fixed wait test for tracer, which was returning for children that were not waited for o Removed second parallel pending call from PM to VFS for any process o Fixed process becoming runnable between exec() and debugger trap o Added support for notifying the debugger before the parent when a debugged child exits o Fixed debugger death causing child to remain stopped forever o Fixed consistently incorrect use of _NSIG Extensions to ptrace(): o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a debugger to and from a process o Added T_SYSCALL ptrace request, to trace system calls o Added T_SETOPT ptrace request, to set trace options o Added TO_TRACEFORK trace option, to attach automatically to children of a traced process o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon a successful exec() of the tracee o Extended T_GETUSER ptrace support to allow retrieving a process's priv structure o Removed T_STOP ptrace request again, as it does not help implementing debuggers properly o Added MINIX3-specific ptrace test (test42) o Added proper manual page for ptrace(2) Asynchronous PM/VFS interface: o Fixed asynchronous messages not being checked when receive() is called with an endpoint other than ANY o Added AMF_NOREPLY senda() flag, preventing such messages from satisfying the receive part of a sendrec() o Added asynsend3() that takes optional flags; asynsend() is now a #define passing in 0 as third parameter o Made PM/VFS protocol asynchronous; reintroduced tell_fs() o Made PM_BASE request/reply number range unique o Hacked in a horrible temporary workaround into RS to deal with newly revealed RS-PM-VFS race condition triangle until VFS is asynchronous System signal handling: o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal o Removed is-superuser check from PM's do_procstat() (aka getsigset()) o Added sigset macros to allow system processes to deal with the full signal set, rather than just the POSIX subset Miscellaneous PM fixes: o Split do_getset into do_get and do_set, merging common code and making structure clearer o Fixed setpriority() being able to put to sleep processes using an invalid parameter, or revive zombie processes o Made find_proc() global; removed obsolete proc_from_pid() o Cleanup here and there Also included: o Fixed false-positive boot order kernel warning o Removed last traces of old NOTIFY_FROM code THINGS OF POSSIBLE INTEREST o It should now be possible to run PM at any priority, even lower than user processes o No assumptions are made about communication speed between PM and VFS, although communication must be FIFO o A debugger will now receive incoming debuggee signals at kill time only; the process may not yet be fully stopped o A first step has been made towards making the SYSTEM task preemptible
1776 lines
51 KiB
C
1776 lines
51 KiB
C
/*
|
|
* lance.c
|
|
*
|
|
* This file contains a ethernet device driver for AMD LANCE based ethernet
|
|
* cards.
|
|
*
|
|
* The valid messages and their parameters are:
|
|
*
|
|
* m_type DL_PORT DL_PROC DL_COUNT DL_MODE DL_ADDR DL_GRANT
|
|
* |------------+----------+---------+----------+---------+---------+---------|
|
|
* | HARDINT | | | | | | |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
* | DL_WRITEV_S| port nr | proc nr | count | mode | | grant |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
* | DL_READV_S | port nr | proc nr | count | | | grant |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
* | DL_CONF | port nr | proc nr | | mode | address | |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
* |DL_GETSTAT_S| port nr | proc nr | | | | grant |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
* | DL_STOP | port_nr | | | | | |
|
|
* |------------|----------|---------|----------|---------|---------|---------|
|
|
*
|
|
* The messages sent are:
|
|
*
|
|
* m-type DL_POR T DL_PROC DL_COUNT DL_STAT DL_CLCK
|
|
* |------------|----------|---------|----------|---------|---------|
|
|
* |DL_TASK_REPL| port nr | proc nr | rd-count | err|stat| clock |
|
|
* |------------|----------|---------|----------|---------|---------|
|
|
*
|
|
* m_type m3_i1 m3_i2 m3_ca1
|
|
* |------------+---------+-----------+---------------|
|
|
* |DL_CONF_REPL| port nr | last port | ethernet addr |
|
|
* |------------|---------|-----------|---------------|
|
|
*
|
|
* Created: Jul 27, 2002 by Kazuya Kodama <kazuya@nii.ac.jp>
|
|
* Adapted for Minix 3: Sep 05, 2005 by Joren l'Ami <jwlami@cs.vu.nl>
|
|
*/
|
|
|
|
#define VERBOSE 0 /* Verbose debugging output */
|
|
#define LANCE_FKEY 0 /* Use function key to dump Lance stats */
|
|
|
|
#include "../drivers.h"
|
|
|
|
#include <minix/keymap.h>
|
|
#include <net/hton.h>
|
|
#include <net/gen/ether.h>
|
|
#include <net/gen/eth_io.h>
|
|
#include <assert.h>
|
|
|
|
#include <minix/syslib.h>
|
|
#include <minix/endpoint.h>
|
|
#include <ibm/pci.h>
|
|
#include <minix/ds.h>
|
|
|
|
#include "lance.h"
|
|
|
|
#include <sys/ioc_memory.h>
|
|
|
|
static ether_card_t ec_table[EC_PORT_NR_MAX];
|
|
static int eth_tasknr= ANY;
|
|
static u16_t eth_ign_proto;
|
|
|
|
/* Configuration */
|
|
typedef struct ec_conf
|
|
{
|
|
port_t ec_port;
|
|
int ec_irq;
|
|
phys_bytes ec_mem;
|
|
char *ec_envvar;
|
|
} ec_conf_t;
|
|
|
|
/* We hardly use these. Just "LANCE0=on/off" "LANCE1=on/off" mean. */
|
|
ec_conf_t ec_conf[]= /* Card addresses */
|
|
{
|
|
/* I/O port, IRQ, Buffer address, Env. var, Buf selector. */
|
|
{ 0x1000, 9, 0x00000, "LANCE0" },
|
|
{ 0xD000, 15, 0x00000, "LANCE1" },
|
|
};
|
|
|
|
/* Actually, we use PCI-BIOS info. */
|
|
PRIVATE struct pcitab
|
|
{
|
|
u16_t vid;
|
|
u16_t did;
|
|
int checkclass;
|
|
} pcitab[]=
|
|
{
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, 0 }, /* AMD LANCE */
|
|
|
|
{ 0x0000, 0x0000, 0 }
|
|
};
|
|
|
|
/* General */
|
|
_PROTOTYPE( static void do_init, (message *mp) );
|
|
_PROTOTYPE( static void ec_init, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void ec_confaddr, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void ec_reinit, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void ec_check_ints, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void conf_hw, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void update_conf, (ether_card_t *ec, ec_conf_t *ecp) );
|
|
_PROTOTYPE( static void mess_reply, (message *req, message *reply) );
|
|
_PROTOTYPE( static void do_int, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void reply,
|
|
(ether_card_t *ec, int err, int may_block) );
|
|
_PROTOTYPE( static void ec_reset, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void ec_send, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void ec_recv, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void do_vwrite_s,
|
|
(message *mp, int from_int) );
|
|
_PROTOTYPE( static void do_vread_s, (message *mp) );
|
|
_PROTOTYPE( static void ec_user2nic,
|
|
(ether_card_t *dep, iovec_dat_t *iovp,
|
|
vir_bytes offset, int nic_addr,
|
|
vir_bytes count) );
|
|
_PROTOTYPE( static void ec_nic2user,
|
|
(ether_card_t *ec, int nic_addr,
|
|
iovec_dat_t *iovp, vir_bytes offset,
|
|
vir_bytes count) );
|
|
_PROTOTYPE( static int calc_iovec_size, (iovec_dat_t *iovp) );
|
|
_PROTOTYPE( static void ec_next_iovec, (iovec_dat_t *iovp) );
|
|
_PROTOTYPE( static void do_getstat_s, (message *mp) );
|
|
_PROTOTYPE( static void do_stop, (message *mp) );
|
|
_PROTOTYPE( static void do_getname, (message *mp) );
|
|
|
|
_PROTOTYPE( static void lance_dump, (void) );
|
|
_PROTOTYPE( static void lance_stop, (void) );
|
|
_PROTOTYPE( static void getAddressing, (int devind, ether_card_t *ec) );
|
|
|
|
/* probe+init LANCE cards */
|
|
_PROTOTYPE( static int lance_probe, (ether_card_t *ec) );
|
|
_PROTOTYPE( static void lance_init_card, (ether_card_t *ec) );
|
|
|
|
/* Accesses Lance Control and Status Registers */
|
|
_PROTOTYPE( static u8_t in_byte, (port_t port) );
|
|
_PROTOTYPE( static u16_t in_word, (port_t port) );
|
|
_PROTOTYPE( static void out_byte, (port_t port, u8_t value) );
|
|
_PROTOTYPE( static void out_word, (port_t port, u16_t value) );
|
|
_PROTOTYPE( static u16_t read_csr, (port_t ioaddr, u16_t csrno) );
|
|
_PROTOTYPE( static void write_csr, (port_t ioaddr, u16_t csrno, u16_t value));
|
|
|
|
/* --- LANCE --- */
|
|
/* General */
|
|
#define Address unsigned long
|
|
|
|
#define virt_to_bus(x) (vir2phys((unsigned long)x))
|
|
unsigned long vir2phys( unsigned long x )
|
|
{
|
|
int r;
|
|
unsigned long value;
|
|
|
|
if ( (r=sys_umap( SELF, VM_D, x, 4, &value )) != OK ) {
|
|
printf("lance: umap of 0x%lx failed\n",x );
|
|
panic( "lance", "sys_umap failed", r );
|
|
}
|
|
|
|
return value;
|
|
}
|
|
|
|
/* DMA limitations */
|
|
#define DMA_ADDR_MASK 0xFFFFFF /* mask to verify DMA address is 24-bit */
|
|
|
|
#define CORRECT_DMA_MEM() ( (virt_to_bus(lance_buf + sizeof(struct lance_interface)) & ~DMA_ADDR_MASK) == 0 )
|
|
|
|
#define ETH_FRAME_LEN 1518
|
|
|
|
#define LANCE_MUST_PAD 0x00000001
|
|
#define LANCE_ENABLE_AUTOSELECT 0x00000002
|
|
#define LANCE_SELECT_PHONELINE 0x00000004
|
|
#define LANCE_MUST_UNRESET 0x00000008
|
|
|
|
static const struct lance_chip_type
|
|
{
|
|
int id_number;
|
|
const char *name;
|
|
int flags;
|
|
} chip_table[] = {
|
|
{0x0000, "LANCE 7990", /* Ancient lance chip. */
|
|
LANCE_MUST_PAD + LANCE_MUST_UNRESET},
|
|
{0x0003, "PCnet/ISA 79C960", /* 79C960 PCnet/ISA. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2260, "PCnet/ISA+ 79C961", /* 79C961 PCnet/ISA+, Plug-n-Play. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2420, "PCnet/PCI 79C970", /* 79C970 or 79C974 PCnet-SCSI, PCI. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2430, "PCnet32", /* 79C965 PCnet for VL bus. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2621, "PCnet/PCI-II 79C970A", /* 79C970A PCInetPCI II. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2625, "PCnet-FAST III 79C973",/* 79C973 PCInet-FAST III. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2626, "PCnet/HomePNA 79C978",
|
|
LANCE_ENABLE_AUTOSELECT|LANCE_SELECT_PHONELINE},
|
|
{0x0, "PCnet (unknown)",
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
};
|
|
|
|
/* ############## for LANCE device ############## */
|
|
#define LANCE_ETH_ADDR 0x0
|
|
#define LANCE_DATA 0x10
|
|
#define LANCE_ADDR 0x12
|
|
#define LANCE_RESET 0x14
|
|
#define LANCE_BUS_IF 0x16
|
|
#define LANCE_TOTAL_SIZE 0x18
|
|
|
|
/* Use 2^4=16 {Rx,Tx} buffers */
|
|
#define LANCE_LOG_RX_BUFFERS 4
|
|
#define RX_RING_SIZE (1 << (LANCE_LOG_RX_BUFFERS))
|
|
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
|
#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29)
|
|
|
|
#define LANCE_LOG_TX_BUFFERS 4
|
|
#define TX_RING_SIZE (1 << (LANCE_LOG_TX_BUFFERS))
|
|
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
|
#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29)
|
|
|
|
/* for lance_interface */
|
|
struct lance_init_block
|
|
{
|
|
unsigned short mode;
|
|
unsigned char phys_addr[6];
|
|
unsigned long filter[2];
|
|
Address rx_ring;
|
|
Address tx_ring;
|
|
};
|
|
|
|
struct lance_rx_head
|
|
{
|
|
union {
|
|
Address base;
|
|
unsigned char addr[4];
|
|
} u;
|
|
short buf_length; /* 2s complement */
|
|
short msg_length;
|
|
};
|
|
|
|
struct lance_tx_head
|
|
{
|
|
union {
|
|
Address base;
|
|
unsigned char addr[4];
|
|
} u;
|
|
short buf_length; /* 2s complement */
|
|
short misc;
|
|
};
|
|
|
|
struct lance_interface
|
|
{
|
|
struct lance_init_block init_block;
|
|
struct lance_rx_head rx_ring[RX_RING_SIZE];
|
|
struct lance_tx_head tx_ring[TX_RING_SIZE];
|
|
unsigned char rbuf[RX_RING_SIZE][ETH_FRAME_LEN];
|
|
unsigned char tbuf[TX_RING_SIZE][ETH_FRAME_LEN];
|
|
};
|
|
|
|
/* =============== global variables =============== */
|
|
static struct lance_interface *lp;
|
|
#define LANCE_BUF_SIZE (sizeof(struct lance_interface))
|
|
static char *lance_buf = NULL;
|
|
static int rx_slot_nr = 0; /* Rx-slot number */
|
|
static int tx_slot_nr = 0; /* Tx-slot number */
|
|
static int cur_tx_slot_nr = 0; /* Tx-slot number */
|
|
static char isstored[TX_RING_SIZE]; /* Tx-slot in-use */
|
|
static char *progname;
|
|
|
|
phys_bytes lance_buf_phys;
|
|
|
|
/*===========================================================================*
|
|
* main *
|
|
*===========================================================================*/
|
|
void main( int argc, char **argv )
|
|
{
|
|
message m;
|
|
int i,irq,r;
|
|
u32_t tasknr;
|
|
ether_card_t *ec;
|
|
long v;
|
|
#if LANCE_FKEY
|
|
int fkeys, sfkeys;
|
|
#endif
|
|
|
|
(progname=strrchr(argv[0],'/')) ? progname++ : (progname=argv[0]);
|
|
|
|
env_setargs( argc, argv );
|
|
|
|
#if LANCE_FKEY
|
|
fkeys = sfkeys = 0;
|
|
bit_set( sfkeys, 7 );
|
|
if ( (r = fkey_map(&fkeys, &sfkeys)) != OK )
|
|
printf("Warning: lance couldn't observe Shift+F7 key: %d\n",r);
|
|
#endif
|
|
|
|
v= 0;
|
|
(void) env_parse("ETH_IGN_PROTO", "x", 0, &v, 0x0000L, 0xFFFFL);
|
|
eth_ign_proto= htons((u16_t) v);
|
|
|
|
/* Try to notify inet that we are present (again) */
|
|
r= ds_retrieve_u32("inet", &tasknr);
|
|
if (r == OK)
|
|
notify(tasknr);
|
|
else if (r != ESRCH)
|
|
printf("lance: ds_retrieve_u32 failed for 'inet': %d\n", r);
|
|
|
|
while (TRUE)
|
|
{
|
|
for (i=0;i<EC_PORT_NR_MAX;++i)
|
|
{
|
|
ec= &ec_table[i];
|
|
if (ec->ec_irq != 0)
|
|
sys_irqenable(&ec->ec_hook);
|
|
}
|
|
|
|
if ((r= receive(ANY, &m)) != OK)
|
|
panic( "lance", "receive failed", r);
|
|
|
|
for (i=0;i<EC_PORT_NR_MAX;++i)
|
|
{
|
|
ec= &ec_table[i];
|
|
if (ec->ec_irq != 0)
|
|
sys_irqdisable(&ec->ec_hook);
|
|
}
|
|
|
|
if (is_notify(m.m_type)) {
|
|
switch(_ENDPOINT_P(m.m_source)) {
|
|
case RS_PROC_NR:
|
|
notify(m.m_source);
|
|
break;
|
|
case TTY_PROC_NR:
|
|
lance_dump();
|
|
break;
|
|
case HARDWARE:
|
|
for (i=0;i<EC_PORT_NR_MAX;++i)
|
|
{
|
|
ec= &ec_table[i];
|
|
if (ec->mode != EC_ENABLED)
|
|
continue;
|
|
|
|
irq=ec->ec_irq;
|
|
{
|
|
ec->ec_int_pending = 0;
|
|
ec_check_ints(ec);
|
|
do_int(ec);
|
|
}
|
|
}
|
|
break;
|
|
case PM_PROC_NR:
|
|
{
|
|
sigset_t set;
|
|
|
|
if (getsigset(&set) != 0) break;
|
|
|
|
if (sigismember(&set, SIGTERM))
|
|
lance_stop();
|
|
|
|
break;
|
|
}
|
|
default:
|
|
panic( "lance", "illegal notify source", m.m_source);
|
|
}
|
|
|
|
/* get next message */
|
|
continue;
|
|
}
|
|
|
|
switch (m.m_type)
|
|
{
|
|
case DL_WRITEV_S:
|
|
do_vwrite_s(&m, FALSE);
|
|
break;
|
|
case DL_READV_S:
|
|
do_vread_s(&m);
|
|
break;
|
|
case DL_CONF:
|
|
do_init(&m);
|
|
break;
|
|
case DL_GETSTAT_S:
|
|
do_getstat_s(&m);
|
|
break;
|
|
case DL_STOP:
|
|
do_stop(&m);
|
|
break;
|
|
case DL_GETNAME:
|
|
do_getname(&m);
|
|
break;
|
|
default:
|
|
panic( "lance", "illegal message", m.m_type);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* lance_dump *
|
|
*===========================================================================*/
|
|
static void lance_dump()
|
|
{
|
|
ether_card_t *ec;
|
|
int i, isr, csr;
|
|
unsigned short ioaddr;
|
|
|
|
printf("\n");
|
|
for (i= 0, ec = &ec_table[0]; i<EC_PORT_NR_MAX; i++, ec++)
|
|
{
|
|
if (ec->mode == EC_DISABLED)
|
|
printf("lance port %d is disabled\n", i);
|
|
else if (ec->mode == EC_SINK)
|
|
printf("lance port %d is in sink mode\n", i);
|
|
|
|
if (ec->mode != EC_ENABLED)
|
|
continue;
|
|
|
|
printf("lance statistics of port %d:\n", i);
|
|
|
|
printf("recvErr :%8ld\t", ec->eth_stat.ets_recvErr);
|
|
printf("sendErr :%8ld\t", ec->eth_stat.ets_sendErr);
|
|
printf("OVW :%8ld\n", ec->eth_stat.ets_OVW);
|
|
|
|
printf("CRCerr :%8ld\t", ec->eth_stat.ets_CRCerr);
|
|
printf("frameAll :%8ld\t", ec->eth_stat.ets_frameAll);
|
|
printf("missedP :%8ld\n", ec->eth_stat.ets_missedP);
|
|
|
|
printf("packetR :%8ld\t", ec->eth_stat.ets_packetR);
|
|
printf("packetT :%8ld\t", ec->eth_stat.ets_packetT);
|
|
printf("transDef :%8ld\n", ec->eth_stat.ets_transDef);
|
|
|
|
printf("collision :%8ld\t", ec->eth_stat.ets_collision);
|
|
printf("transAb :%8ld\t", ec->eth_stat.ets_transAb);
|
|
printf("carrSense :%8ld\n", ec->eth_stat.ets_carrSense);
|
|
|
|
printf("fifoUnder :%8ld\t", ec->eth_stat.ets_fifoUnder);
|
|
printf("fifoOver :%8ld\t", ec->eth_stat.ets_fifoOver);
|
|
printf("CDheartbeat:%8ld\n", ec->eth_stat.ets_CDheartbeat);
|
|
|
|
printf("OWC :%8ld\t", ec->eth_stat.ets_OWC);
|
|
|
|
ioaddr = ec->ec_port;
|
|
isr = read_csr(ioaddr, LANCE_CSR0);
|
|
printf("isr = 0x%x, flags = 0x%x\n", isr,
|
|
ec->flags);
|
|
|
|
printf("irq = %d\tioadr = 0x%x\n", ec->ec_irq, ec->ec_port);
|
|
|
|
csr = read_csr(ioaddr, LANCE_CSR0);
|
|
printf("CSR0: 0x%x\n", csr);
|
|
csr = read_csr(ioaddr, LANCE_CSR3);
|
|
printf("CSR3: 0x%x\n", csr);
|
|
csr = read_csr(ioaddr, LANCE_CSR4);
|
|
printf("CSR4: 0x%x\n", csr);
|
|
csr = read_csr(ioaddr, LANCE_CSR5);
|
|
printf("CSR5: 0x%x\n", csr);
|
|
csr = read_csr(ioaddr, LANCE_CSR15);
|
|
printf("CSR15: 0x%x\n", csr);
|
|
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* lance_stop *
|
|
*===========================================================================*/
|
|
static void lance_stop()
|
|
{
|
|
message mess;
|
|
int i;
|
|
|
|
for (i= 0; i<EC_PORT_NR_MAX; i++)
|
|
{
|
|
if (ec_table[i].mode != EC_ENABLED)
|
|
continue;
|
|
mess.m_type= DL_STOP;
|
|
mess.DL_PORT= i;
|
|
do_stop(&mess);
|
|
}
|
|
|
|
#if VERBOSE
|
|
printf("LANCE driver stopped.\n");
|
|
#endif
|
|
|
|
exit( 0 );
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* do_init *
|
|
*===========================================================================*/
|
|
static void do_init(mp)
|
|
message *mp;
|
|
{
|
|
int port;
|
|
ether_card_t *ec;
|
|
message reply_mess;
|
|
static int first_time = 1;
|
|
|
|
pci_init();
|
|
|
|
if(!lance_buf && !(lance_buf = alloc_contig(LANCE_BUF_SIZE, AC_ALIGN4K|AC_LOWER16M, &lance_buf_phys))) {
|
|
panic( "lance", "alloc_contig failed", LANCE_BUF_SIZE);
|
|
}
|
|
|
|
port = mp->DL_PORT;
|
|
if (port < 0 || port >= EC_PORT_NR_MAX)
|
|
{
|
|
reply_mess.m_type= DL_CONF_REPLY;
|
|
reply_mess.m3_i1= ENXIO;
|
|
mess_reply(mp, &reply_mess);
|
|
return;
|
|
}
|
|
|
|
ec= &ec_table[port];
|
|
strcpy(ec->port_name, "eth_card#0");
|
|
ec->port_name[9] += port;
|
|
|
|
if (ec->mode == EC_DISABLED)
|
|
{
|
|
/* This is the default, try to (re)locate the device. */
|
|
/* only try to enable if memory is correct for DMA */
|
|
if ( CORRECT_DMA_MEM() )
|
|
{
|
|
conf_hw(ec);
|
|
}
|
|
else
|
|
{
|
|
report( "LANCE", "DMA denied because address out of range", NO_NUM );
|
|
}
|
|
|
|
if (ec->mode == EC_DISABLED)
|
|
{
|
|
/* Probe failed, or the device is configured off. */
|
|
reply_mess.m_type= DL_CONF_REPLY;
|
|
reply_mess.m3_i1= ENXIO;
|
|
mess_reply(mp, &reply_mess);
|
|
return;
|
|
}
|
|
if (ec->mode == EC_ENABLED)
|
|
ec_init(ec);
|
|
}
|
|
|
|
if (ec->mode == EC_SINK)
|
|
{
|
|
ec->mac_address.ea_addr[0] =
|
|
ec->mac_address.ea_addr[1] =
|
|
ec->mac_address.ea_addr[2] =
|
|
ec->mac_address.ea_addr[3] =
|
|
ec->mac_address.ea_addr[4] =
|
|
ec->mac_address.ea_addr[5] = 0;
|
|
ec_confaddr(ec);
|
|
reply_mess.m_type = DL_CONF_REPLY;
|
|
reply_mess.m3_i1 = mp->DL_PORT;
|
|
reply_mess.m3_i2 = EC_PORT_NR_MAX;
|
|
*(ether_addr_t *) reply_mess.m3_ca1 = ec->mac_address;
|
|
mess_reply(mp, &reply_mess);
|
|
return;
|
|
}
|
|
assert(ec->mode == EC_ENABLED);
|
|
assert(ec->flags & ECF_ENABLED);
|
|
|
|
ec->flags &= ~(ECF_PROMISC | ECF_MULTI | ECF_BROAD);
|
|
|
|
if (mp->DL_MODE & DL_PROMISC_REQ)
|
|
ec->flags |= ECF_PROMISC | ECF_MULTI | ECF_BROAD;
|
|
if (mp->DL_MODE & DL_MULTI_REQ)
|
|
ec->flags |= ECF_MULTI;
|
|
if (mp->DL_MODE & DL_BROAD_REQ)
|
|
ec->flags |= ECF_BROAD;
|
|
|
|
ec->client = mp->m_source;
|
|
if (first_time)
|
|
{
|
|
first_time = 0;
|
|
ec_reinit(ec);
|
|
}
|
|
|
|
reply_mess.m_type = DL_CONF_REPLY;
|
|
reply_mess.m3_i1 = mp->DL_PORT;
|
|
reply_mess.m3_i2 = EC_PORT_NR_MAX;
|
|
*(ether_addr_t *) reply_mess.m3_ca1 = ec->mac_address;
|
|
|
|
mess_reply(mp, &reply_mess);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* do_int *
|
|
*===========================================================================*/
|
|
static void do_int(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
if (ec->flags & (ECF_PACK_SEND | ECF_PACK_RECV))
|
|
reply(ec, OK, TRUE);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* conf_hw *
|
|
*===========================================================================*/
|
|
static void conf_hw(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
static eth_stat_t empty_stat = {0, 0, 0, 0, 0, 0 /* ,... */ };
|
|
|
|
int ifnr;
|
|
ec_conf_t *ecp;
|
|
|
|
ec->mode= EC_DISABLED; /* Superfluous */
|
|
ifnr= ec-ec_table;
|
|
|
|
ecp= &ec_conf[ifnr];
|
|
update_conf(ec, ecp);
|
|
if (ec->mode != EC_ENABLED)
|
|
return;
|
|
|
|
if (!lance_probe(ec))
|
|
{
|
|
printf("%s: No ethernet card found on PCI-BIOS info.\n",
|
|
ec->port_name);
|
|
ec->mode= EC_DISABLED;
|
|
return;
|
|
}
|
|
|
|
/* XXX */ if (ec->ec_linmem == 0) ec->ec_linmem= 0xFFFF0000;
|
|
|
|
ec->flags = ECF_EMPTY;
|
|
ec->eth_stat = empty_stat;
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* update_conf *
|
|
*===========================================================================*/
|
|
static void update_conf(ec, ecp)
|
|
ether_card_t *ec;
|
|
ec_conf_t *ecp;
|
|
{
|
|
long v;
|
|
static char ec_fmt[] = "x:d:x:x";
|
|
|
|
/* Get the default settings and modify them from the environment. */
|
|
ec->mode= EC_SINK;
|
|
v= ecp->ec_port;
|
|
switch (env_parse(ecp->ec_envvar, ec_fmt, 0, &v, 0x0000L, 0xFFFFL))
|
|
{
|
|
case EP_OFF:
|
|
ec->mode= EC_DISABLED;
|
|
break;
|
|
case EP_ON:
|
|
case EP_SET:
|
|
default:
|
|
ec->mode= EC_ENABLED; /* Might become disabled if
|
|
* all probes fail */
|
|
break;
|
|
}
|
|
|
|
ec->ec_port= v;
|
|
|
|
v= ecp->ec_irq | DEI_DEFAULT;
|
|
(void) env_parse(ecp->ec_envvar, ec_fmt, 1, &v, 0L,
|
|
(long) NR_IRQ_VECTORS - 1);
|
|
ec->ec_irq= v;
|
|
|
|
v= ecp->ec_mem;
|
|
(void) env_parse(ecp->ec_envvar, ec_fmt, 2, &v, 0L, 0xFFFFFL);
|
|
ec->ec_linmem= v;
|
|
|
|
v= 0;
|
|
(void) env_parse(ecp->ec_envvar, ec_fmt, 3, &v, 0x2000L, 0x8000L);
|
|
ec->ec_ramsize= v;
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* ec_init *
|
|
*===========================================================================*/
|
|
static void ec_init(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
int i, r;
|
|
|
|
/* General initialization */
|
|
ec->flags = ECF_EMPTY;
|
|
lance_init_card(ec); /* Get mac_address, etc ...*/
|
|
|
|
ec_confaddr(ec);
|
|
|
|
#if VERBOSE
|
|
printf("%s: Ethernet address ", ec->port_name);
|
|
for (i= 0; i < 6; i++)
|
|
printf("%x%c", ec->mac_address.ea_addr[i],
|
|
i < 5 ? ':' : '\n');
|
|
#endif
|
|
|
|
/* Finish the initialization */
|
|
ec->flags |= ECF_ENABLED;
|
|
|
|
/* Set the interrupt handler */
|
|
ec->ec_hook = ec->ec_irq;
|
|
if ((r=sys_irqsetpolicy(ec->ec_irq, 0, &ec->ec_hook)) != OK)
|
|
printf("lance: error, couldn't set IRQ policy: %d\n", r);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* reply *
|
|
*===========================================================================*/
|
|
static void reply(ec, err, may_block)
|
|
ether_card_t *ec;
|
|
int err;
|
|
int may_block;
|
|
{
|
|
message reply;
|
|
int status,r;
|
|
clock_t now;
|
|
|
|
status = 0;
|
|
if (ec->flags & ECF_PACK_SEND)
|
|
status |= DL_PACK_SEND;
|
|
if (ec->flags & ECF_PACK_RECV)
|
|
status |= DL_PACK_RECV;
|
|
|
|
reply.m_type = DL_TASK_REPLY;
|
|
reply.DL_PORT = ec - ec_table;
|
|
reply.DL_PROC = ec->client;
|
|
reply.DL_STAT = status | ((u32_t) err << 16);
|
|
reply.DL_COUNT = ec->read_s;
|
|
|
|
if ((r=getuptime(&now)) != OK)
|
|
panic("lance", "getuptime() failed:", r);
|
|
reply.DL_CLCK = now;
|
|
|
|
r = send(ec->client, &reply);
|
|
if (r == ELOCKED && may_block)
|
|
{
|
|
return;
|
|
}
|
|
if (r < 0)
|
|
panic( "lance", "send failed:", r);
|
|
|
|
ec->read_s = 0;
|
|
ec->flags &= ~(ECF_PACK_SEND | ECF_PACK_RECV);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* mess_reply *
|
|
*===========================================================================*/
|
|
static void mess_reply(req, reply_mess)
|
|
message *req;
|
|
message *reply_mess;
|
|
{
|
|
if (send(req->m_source, reply_mess) != OK)
|
|
panic( "lance", "unable to mess_reply", NO_NUM);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* ec_confaddr *
|
|
*===========================================================================*/
|
|
static void ec_confaddr(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
int i;
|
|
char eakey[16];
|
|
static char eafmt[]= "x:x:x:x:x:x";
|
|
long v;
|
|
|
|
/* User defined ethernet address? */
|
|
strcpy(eakey, ec_conf[ec-ec_table].ec_envvar);
|
|
strcat(eakey, "_EA");
|
|
|
|
for (i = 0; i < 6; i++)
|
|
{
|
|
v= ec->mac_address.ea_addr[i];
|
|
if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET)
|
|
break;
|
|
ec->mac_address.ea_addr[i]= v;
|
|
}
|
|
|
|
if (i != 0 && i != 6)
|
|
{
|
|
/* It's all or nothing; force a panic. */
|
|
(void) env_parse(eakey, "?", 0, &v, 0L, 0L);
|
|
}
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* ec_reinit *
|
|
*===========================================================================*/
|
|
static void ec_reinit(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
int i;
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
/* stop */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
/* purge Tx-ring */
|
|
tx_slot_nr = cur_tx_slot_nr = 0;
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
{
|
|
lp->tx_ring[i].u.base = 0;
|
|
isstored[i]=0;
|
|
}
|
|
|
|
/* re-init Rx-ring */
|
|
rx_slot_nr = 0;
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
{
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
lp->rx_ring[i].u.addr[3] |= 0x80;
|
|
}
|
|
|
|
/* Set 'Receive Mode' */
|
|
if (ec->flags & ECF_PROMISC)
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
|
|
}
|
|
else
|
|
{
|
|
if (ec->flags & (ECF_BROAD | ECF_MULTI))
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, 0x0000);
|
|
}
|
|
else
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
|
|
}
|
|
}
|
|
|
|
/* start && enable interrupt */
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
|
|
|
|
return;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_check_ints *
|
|
*===========================================================================*/
|
|
static void ec_check_ints(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
int must_restart = 0;
|
|
int check,status;
|
|
int isr = 0x0000;
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
if (!(ec->flags & ECF_ENABLED))
|
|
panic( "lance", "got premature interrupt", NO_NUM);
|
|
|
|
for (;;)
|
|
{
|
|
#if VERBOSE
|
|
printf("ETH: Reading ISR...");
|
|
#endif
|
|
isr = read_csr(ioaddr, LANCE_CSR0);
|
|
if (isr & (LANCE_CSR0_ERR|LANCE_CSR0_RINT|LANCE_CSR0_TINT)) {
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
isr & ~(LANCE_CSR0_IENA|LANCE_CSR0_TDMD|LANCE_CSR0_STOP
|
|
|LANCE_CSR0_STRT|LANCE_CSR0_INIT) );
|
|
}
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS|LANCE_CSR0_MERR
|
|
|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
|
|
|
|
#define ISR_RST 0x0000
|
|
|
|
if ((isr & (LANCE_CSR0_TINT|LANCE_CSR0_RINT|LANCE_CSR0_MISS
|
|
|LANCE_CSR0_BABL|LANCE_CSR0_ERR)) == 0x0000)
|
|
{
|
|
#if VERBOSE
|
|
printf("OK\n");
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
if (isr & LANCE_CSR0_MISS)
|
|
{
|
|
#if VERBOSE
|
|
printf("RX Missed Frame\n");
|
|
#endif
|
|
ec->eth_stat.ets_recvErr++;
|
|
}
|
|
if ((isr & LANCE_CSR0_BABL) || (isr & LANCE_CSR0_TINT))
|
|
{
|
|
if (isr & LANCE_CSR0_BABL)
|
|
{
|
|
#if VERBOSE
|
|
printf("TX Timeout\n");
|
|
#endif
|
|
ec->eth_stat.ets_sendErr++;
|
|
}
|
|
if (isr & LANCE_CSR0_TINT)
|
|
{
|
|
#if VERBOSE
|
|
printf("TX INT\n");
|
|
#endif
|
|
/* status check: restart if needed. */
|
|
status = lp->tx_ring[cur_tx_slot_nr].u.base;
|
|
|
|
/* ??? */
|
|
if (status & 0x40000000)
|
|
{
|
|
status = lp->tx_ring[cur_tx_slot_nr].misc;
|
|
ec->eth_stat.ets_sendErr++;
|
|
if (status & 0x0400)
|
|
ec->eth_stat.ets_transAb++;
|
|
if (status & 0x0800)
|
|
ec->eth_stat.ets_carrSense++;
|
|
if (status & 0x1000)
|
|
ec->eth_stat.ets_OWC++;
|
|
if (status & 0x4000)
|
|
{
|
|
ec->eth_stat.ets_fifoUnder++;
|
|
must_restart=1;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (status & 0x18000000)
|
|
ec->eth_stat.ets_collision++;
|
|
ec->eth_stat.ets_packetT++;
|
|
}
|
|
}
|
|
/* transmit a packet on the next slot if it exists. */
|
|
check = 0;
|
|
if (isstored[cur_tx_slot_nr]==1)
|
|
{
|
|
/* free the tx-slot just transmitted */
|
|
isstored[cur_tx_slot_nr]=0;
|
|
cur_tx_slot_nr = (++cur_tx_slot_nr) & TX_RING_MOD_MASK;
|
|
|
|
/* next tx-slot is ready? */
|
|
if (isstored[cur_tx_slot_nr]==1)
|
|
check=1;
|
|
else
|
|
check=0;
|
|
}
|
|
else
|
|
{
|
|
panic( "lance", "got premature TX INT...", NO_NUM);
|
|
}
|
|
if (check==1)
|
|
{
|
|
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
|
|
}
|
|
else
|
|
if (check==-1)
|
|
continue;
|
|
/* we set a buffered message in the slot if it exists. */
|
|
/* and transmit it, if needed. */
|
|
if (ec->flags & ECF_SEND_AVAIL)
|
|
ec_send(ec);
|
|
}
|
|
if (isr & LANCE_CSR0_RINT)
|
|
{
|
|
#if VERBOSE
|
|
printf("RX INT\n");
|
|
#endif
|
|
ec_recv(ec);
|
|
}
|
|
|
|
if (isr & ISR_RST)
|
|
{
|
|
ec->flags = ECF_STOPPED;
|
|
#if VERBOSE
|
|
printf("ISR_RST\n");
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
/* ??? cf. lance driver on linux */
|
|
if (must_restart == 1)
|
|
{
|
|
#if VERBOSE
|
|
printf("ETH: restarting...\n");
|
|
#endif
|
|
/* stop */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
/* start */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
|
|
}
|
|
}
|
|
|
|
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
|
|
{
|
|
#if VERBOSE
|
|
printf("ETH: resetting...\n");
|
|
#endif
|
|
ec_reset(ec);
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_reset *
|
|
*===========================================================================*/
|
|
static void ec_reset(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
/* Stop/start the chip, and clear all RX,TX-slots */
|
|
unsigned short ioaddr = ec->ec_port;
|
|
int i;
|
|
|
|
/* stop */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
/* start */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STRT);
|
|
|
|
/* purge Tx-ring */
|
|
tx_slot_nr = cur_tx_slot_nr = 0;
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
{
|
|
lp->tx_ring[i].u.base = 0;
|
|
isstored[i]=0;
|
|
}
|
|
|
|
/* re-init Rx-ring */
|
|
rx_slot_nr = 0;
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
{
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
lp->rx_ring[i].u.addr[3] |= 0x80;
|
|
}
|
|
|
|
/* store a buffered message on the slot if exists */
|
|
ec_send(ec);
|
|
ec->flags &= ~ECF_STOPPED;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_send *
|
|
*===========================================================================*/
|
|
static void ec_send(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
/* from ec_check_ints() or ec_reset(). */
|
|
/* this function proccesses the buffered message. (slot/transmit) */
|
|
if (!(ec->flags & ECF_SEND_AVAIL))
|
|
return;
|
|
|
|
ec->flags &= ~ECF_SEND_AVAIL;
|
|
switch(ec->sendmsg.m_type)
|
|
{
|
|
case DL_WRITEV_S: do_vwrite_s(&ec->sendmsg, TRUE); break;
|
|
default:
|
|
panic( "lance", "wrong type:", ec->sendmsg.m_type);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_vread_s *
|
|
*===========================================================================*/
|
|
static void do_vread_s(mp)
|
|
message *mp;
|
|
{
|
|
int port, count, size, r;
|
|
ether_card_t *ec;
|
|
|
|
port = mp->DL_PORT;
|
|
count = mp->DL_COUNT;
|
|
ec= &ec_table[port];
|
|
ec->client= mp->DL_PROC;
|
|
|
|
r = sys_safecopyfrom(mp->DL_PROC, mp->DL_GRANT, 0,
|
|
(vir_bytes)ec->read_iovec.iod_iovec,
|
|
(count > IOVEC_NR ? IOVEC_NR : count) *
|
|
sizeof(iovec_s_t), D);
|
|
if (r != OK)
|
|
panic(__FILE__,
|
|
"do_vread_s: sys_safecopyfrom failed: %d\n", r);
|
|
ec->read_iovec.iod_iovec_s = count;
|
|
ec->read_iovec.iod_proc_nr = mp->DL_PROC;
|
|
ec->read_iovec.iod_grant = (vir_bytes) mp->DL_GRANT;
|
|
ec->read_iovec.iod_iovec_offset = 0;
|
|
|
|
ec->tmp_iovec = ec->read_iovec;
|
|
size= calc_iovec_size(&ec->tmp_iovec);
|
|
|
|
ec->flags |= ECF_READING;
|
|
|
|
ec_recv(ec);
|
|
|
|
if ((ec->flags & (ECF_READING|ECF_STOPPED)) == (ECF_READING|ECF_STOPPED))
|
|
ec_reset(ec);
|
|
reply(ec, OK, FALSE);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_recv *
|
|
*===========================================================================*/
|
|
static void ec_recv(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
vir_bytes length;
|
|
int packet_processed;
|
|
int status;
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
if ((ec->flags & ECF_READING)==0)
|
|
return;
|
|
if (!(ec->flags & ECF_ENABLED))
|
|
return;
|
|
|
|
/* we check all the received slots until find a properly received packet */
|
|
packet_processed = FALSE;
|
|
while (!packet_processed)
|
|
{
|
|
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
|
|
if ( (status & 0x80) == 0x00 )
|
|
{
|
|
status = lp->rx_ring[rx_slot_nr].u.base >> 24;
|
|
|
|
/* ??? */
|
|
if (status != 0x03)
|
|
{
|
|
if (status & 0x01)
|
|
ec->eth_stat.ets_recvErr++;
|
|
if (status & 0x04)
|
|
ec->eth_stat.ets_fifoOver++;
|
|
if (status & 0x08)
|
|
ec->eth_stat.ets_CRCerr++;
|
|
if (status & 0x10)
|
|
ec->eth_stat.ets_OVW++;
|
|
if (status & 0x20)
|
|
ec->eth_stat.ets_frameAll++;
|
|
length = 0;
|
|
}
|
|
else
|
|
{
|
|
ec->eth_stat.ets_packetR++;
|
|
length = lp->rx_ring[rx_slot_nr].msg_length;
|
|
}
|
|
if (length > 0)
|
|
{
|
|
ec_nic2user(ec, (int)(lp->rbuf[rx_slot_nr]),
|
|
&ec->read_iovec, 0, length);
|
|
|
|
ec->read_s = length;
|
|
ec->flags |= ECF_PACK_RECV;
|
|
ec->flags &= ~ECF_READING;
|
|
packet_processed = TRUE;
|
|
}
|
|
/* set up this slot again, and we move to the next slot */
|
|
lp->rx_ring[rx_slot_nr].buf_length = -ETH_FRAME_LEN;
|
|
lp->rx_ring[rx_slot_nr].u.addr[3] |= 0x80;
|
|
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
LANCE_CSR0_BABL|LANCE_CSR0_CERR|LANCE_CSR0_MISS
|
|
|LANCE_CSR0_MERR|LANCE_CSR0_IDON|LANCE_CSR0_IENA);
|
|
|
|
rx_slot_nr = (++rx_slot_nr) & RX_RING_MOD_MASK;
|
|
}
|
|
else
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_vwrite_s *
|
|
*===========================================================================*/
|
|
static void do_vwrite_s(mp, from_int)
|
|
message *mp;
|
|
int from_int;
|
|
{
|
|
int port, count, check, r;
|
|
ether_card_t *ec;
|
|
unsigned short ioaddr;
|
|
|
|
port = mp->DL_PORT;
|
|
count = mp->DL_COUNT;
|
|
ec = &ec_table[port];
|
|
ec->client= mp->DL_PROC;
|
|
|
|
if (isstored[tx_slot_nr]==1)
|
|
{
|
|
/* all slots are used, so this message is buffered */
|
|
ec->sendmsg= *mp;
|
|
ec->flags |= ECF_SEND_AVAIL;
|
|
reply(ec, OK, FALSE);
|
|
return;
|
|
}
|
|
|
|
/* convert the message to write_iovec */
|
|
r = sys_safecopyfrom(mp->DL_PROC, mp->DL_GRANT, 0,
|
|
(vir_bytes)ec->write_iovec.iod_iovec,
|
|
(count > IOVEC_NR ? IOVEC_NR : count) *
|
|
sizeof(iovec_s_t), D);
|
|
if (r != OK)
|
|
panic(__FILE__,
|
|
"do_vwrite_s: sys_safecopyfrom failed: %d\n", r);
|
|
|
|
ec->write_iovec.iod_iovec_s = count;
|
|
ec->write_iovec.iod_proc_nr = mp->DL_PROC;
|
|
ec->write_iovec.iod_grant = mp->DL_GRANT;
|
|
ec->write_iovec.iod_iovec_offset = 0;
|
|
|
|
ec->tmp_iovec = ec->write_iovec;
|
|
ec->write_s = calc_iovec_size(&ec->tmp_iovec);
|
|
|
|
/* copy write_iovec to the slot on DMA address */
|
|
ec_user2nic(ec, &ec->write_iovec, 0,
|
|
(int)(lp->tbuf[tx_slot_nr]), ec->write_s);
|
|
/* set-up for transmitting, and transmit it if needed. */
|
|
lp->tx_ring[tx_slot_nr].buf_length = -ec->write_s;
|
|
lp->tx_ring[tx_slot_nr].misc = 0x0;
|
|
lp->tx_ring[tx_slot_nr].u.base
|
|
= virt_to_bus(lp->tbuf[tx_slot_nr]) & 0xffffff;
|
|
isstored[tx_slot_nr]=1;
|
|
if (cur_tx_slot_nr == tx_slot_nr)
|
|
check=1;
|
|
else
|
|
check=0;
|
|
tx_slot_nr = (++tx_slot_nr) & TX_RING_MOD_MASK;
|
|
|
|
if (check == 1)
|
|
{
|
|
ioaddr = ec->ec_port;
|
|
lp->tx_ring[cur_tx_slot_nr].u.addr[3] = 0x83;
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_IENA|LANCE_CSR0_TDMD);
|
|
}
|
|
|
|
ec->flags |= ECF_PACK_SEND;
|
|
|
|
/* reply by calling do_int() if this function is called from interrupt. */
|
|
if (from_int)
|
|
return;
|
|
reply(ec, OK, FALSE);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* ec_user2nic *
|
|
*===========================================================================*/
|
|
static void ec_user2nic(ec, iovp, offset, nic_addr, count)
|
|
ether_card_t *ec;
|
|
iovec_dat_t *iovp;
|
|
vir_bytes offset;
|
|
int nic_addr;
|
|
vir_bytes count;
|
|
{
|
|
int bytes, i, r;
|
|
|
|
i= 0;
|
|
while (count > 0)
|
|
{
|
|
if (i >= IOVEC_NR)
|
|
{
|
|
ec_next_iovec(iovp);
|
|
i= 0;
|
|
continue;
|
|
}
|
|
if (offset >= iovp->iod_iovec[i].iov_size)
|
|
{
|
|
offset -= iovp->iod_iovec[i].iov_size;
|
|
i++;
|
|
continue;
|
|
}
|
|
bytes = iovp->iod_iovec[i].iov_size - offset;
|
|
if (bytes > count)
|
|
bytes = count;
|
|
|
|
if ( (r=sys_safecopyfrom(iovp->iod_proc_nr,
|
|
iovp->iod_iovec[i].iov_grant, offset,
|
|
nic_addr, bytes, D )) != OK )
|
|
panic( __FILE__, "ec_user2nic: sys_safecopyfrom failed", r );
|
|
|
|
count -= bytes;
|
|
nic_addr += bytes;
|
|
offset += bytes;
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_nic2user *
|
|
*===========================================================================*/
|
|
static void ec_nic2user(ec, nic_addr, iovp, offset, count)
|
|
ether_card_t *ec;
|
|
int nic_addr;
|
|
iovec_dat_t *iovp;
|
|
vir_bytes offset;
|
|
vir_bytes count;
|
|
{
|
|
int bytes, i, r;
|
|
|
|
i= 0;
|
|
while (count > 0)
|
|
{
|
|
if (i >= IOVEC_NR)
|
|
{
|
|
ec_next_iovec(iovp);
|
|
i= 0;
|
|
continue;
|
|
}
|
|
if (offset >= iovp->iod_iovec[i].iov_size)
|
|
{
|
|
offset -= iovp->iod_iovec[i].iov_size;
|
|
i++;
|
|
continue;
|
|
}
|
|
bytes = iovp->iod_iovec[i].iov_size - offset;
|
|
if (bytes > count)
|
|
bytes = count;
|
|
if ( (r=sys_safecopyto( iovp->iod_proc_nr, iovp->iod_iovec[i].iov_grant,
|
|
offset, nic_addr, bytes, D )) != OK )
|
|
panic( __FILE__, "ec_nic2user: sys_safecopyto failed: ", r );
|
|
|
|
count -= bytes;
|
|
nic_addr += bytes;
|
|
offset += bytes;
|
|
}
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* calc_iovec_size *
|
|
*===========================================================================*/
|
|
static int calc_iovec_size(iovp)
|
|
iovec_dat_t *iovp;
|
|
{
|
|
int size,i;
|
|
|
|
size = i = 0;
|
|
|
|
while (i < iovp->iod_iovec_s)
|
|
{
|
|
if (i >= IOVEC_NR)
|
|
{
|
|
ec_next_iovec(iovp);
|
|
i= 0;
|
|
continue;
|
|
}
|
|
size += iovp->iod_iovec[i].iov_size;
|
|
i++;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* ec_next_iovec *
|
|
*===========================================================================*/
|
|
static void ec_next_iovec(iovp)
|
|
iovec_dat_t *iovp;
|
|
{
|
|
int r;
|
|
|
|
iovp->iod_iovec_s -= IOVEC_NR;
|
|
iovp->iod_iovec_offset += IOVEC_NR * sizeof(iovec_s_t);
|
|
|
|
r = sys_safecopyfrom(iovp->iod_proc_nr, iovp->iod_grant,
|
|
iovp->iod_iovec_offset,
|
|
(vir_bytes)iovp->iod_iovec,
|
|
(iovp->iod_iovec_s > IOVEC_NR ?
|
|
IOVEC_NR : iovp->iod_iovec_s) *
|
|
sizeof(iovec_s_t), D);
|
|
if (r != OK)
|
|
panic(__FILE__,
|
|
"ec_next_iovec: sys_safecopyfrom failed: %d\n", r);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* do_getstat_s *
|
|
*===========================================================================*/
|
|
static void do_getstat_s(mp)
|
|
message *mp;
|
|
{
|
|
int r, port;
|
|
ether_card_t *ec;
|
|
|
|
port = mp->DL_PORT;
|
|
if (port < 0 || port >= EC_PORT_NR_MAX)
|
|
panic( "lance", "illegal port", port);
|
|
|
|
ec= &ec_table[port];
|
|
ec->client= mp->DL_PROC;
|
|
|
|
r = sys_safecopyto(mp->DL_PROC, mp->DL_GRANT, 0,
|
|
(vir_bytes)&ec->eth_stat, sizeof(ec->eth_stat), D);
|
|
|
|
if (r != OK)
|
|
panic(__FILE__,
|
|
"do_getstat_s: sys_safecopyto failed: %d\n", r);
|
|
|
|
mp->m_type= DL_STAT_REPLY;
|
|
mp->DL_PORT= port;
|
|
mp->DL_STAT= OK;
|
|
r= send(mp->m_source, mp);
|
|
if (r != OK)
|
|
panic(__FILE__, "do_getstat_s: send failed: %d\n", r);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_stop *
|
|
*===========================================================================*/
|
|
static void do_stop(mp)
|
|
message *mp;
|
|
{
|
|
int port;
|
|
ether_card_t *ec;
|
|
unsigned short ioaddr;
|
|
|
|
port = mp->DL_PORT;
|
|
if (port < 0 || port >= EC_PORT_NR_MAX)
|
|
panic( "lance", "illegal port", port);
|
|
ec = &ec_table[port];
|
|
|
|
if (!(ec->flags & ECF_ENABLED))
|
|
return;
|
|
|
|
ioaddr = ec->ec_port;
|
|
|
|
/* stop */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
|
|
/* Reset */
|
|
in_word(ioaddr+LANCE_RESET);
|
|
|
|
ec->flags = ECF_EMPTY;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* getAddressing *
|
|
*===========================================================================*/
|
|
static void getAddressing(devind, ec)
|
|
int devind;
|
|
ether_card_t *ec;
|
|
{
|
|
unsigned int membase, ioaddr;
|
|
int reg, irq;
|
|
|
|
for (reg = PCI_BASE_ADDRESS_0; reg <= PCI_BASE_ADDRESS_5; reg += 4)
|
|
{
|
|
ioaddr = pci_attr_r32(devind, reg);
|
|
|
|
if ((ioaddr & PCI_BASE_ADDRESS_IO_MASK) == 0
|
|
|| (ioaddr & PCI_BASE_ADDRESS_SPACE_IO) == 0)
|
|
continue;
|
|
/* Strip the I/O address out of the returned value */
|
|
ioaddr &= PCI_BASE_ADDRESS_IO_MASK;
|
|
/* Get the memory base address */
|
|
membase = pci_attr_r32(devind, PCI_BASE_ADDRESS_1);
|
|
/* KK: Get the IRQ number */
|
|
irq = pci_attr_r8(devind, PCI_INTERRUPT_PIN);
|
|
if (irq)
|
|
irq = pci_attr_r8(devind, PCI_INTERRUPT_LINE);
|
|
|
|
ec->ec_linmem = membase;
|
|
ec->ec_port = ioaddr;
|
|
ec->ec_irq = irq;
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* lance_probe *
|
|
*===========================================================================*/
|
|
static int lance_probe(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
unsigned short pci_cmd, attached = 0;
|
|
unsigned short ioaddr;
|
|
int lance_version, chip_version;
|
|
int devind, just_one, i, r;
|
|
|
|
u16_t vid, did;
|
|
u32_t bar;
|
|
u8_t ilr;
|
|
char *dname;
|
|
|
|
if ((ec->ec_pcibus | ec->ec_pcidev | ec->ec_pcifunc) != 0)
|
|
{
|
|
/* Look for specific PCI device */
|
|
r= pci_find_dev(ec->ec_pcibus, ec->ec_pcidev,
|
|
ec->ec_pcifunc, &devind);
|
|
if (r == 0)
|
|
{
|
|
printf("%s: no PCI found at %d.%d.%d\n",
|
|
ec->port_name, ec->ec_pcibus,
|
|
ec->ec_pcidev, ec->ec_pcifunc);
|
|
return 0;
|
|
}
|
|
pci_ids(devind, &vid, &did);
|
|
just_one= TRUE;
|
|
}
|
|
else
|
|
{
|
|
r= pci_first_dev(&devind, &vid, &did);
|
|
if (r == 0)
|
|
return 0;
|
|
just_one= FALSE;
|
|
}
|
|
|
|
for(;;)
|
|
{
|
|
for (i= 0; pcitab[i].vid != 0; i++)
|
|
{
|
|
if (pcitab[i].vid != vid)
|
|
continue;
|
|
if (pcitab[i].did != did)
|
|
continue;
|
|
if (pcitab[i].checkclass)
|
|
{
|
|
panic("lance",
|
|
"class check not implemented", NO_NUM);
|
|
}
|
|
break;
|
|
}
|
|
if (pcitab[i].vid != 0)
|
|
break;
|
|
|
|
if (just_one)
|
|
{
|
|
printf(
|
|
"%s: wrong PCI device (%04x/%04x) found at %d.%d.%d\n",
|
|
ec->port_name, vid, did,
|
|
ec->ec_pcibus,
|
|
ec->ec_pcidev, ec->ec_pcifunc);
|
|
return 0;
|
|
}
|
|
|
|
r= pci_next_dev(&devind, &vid, &did);
|
|
if (!r)
|
|
return 0;
|
|
}
|
|
|
|
dname= pci_dev_name(vid, did);
|
|
if (!dname)
|
|
dname= "unknown device";
|
|
|
|
pci_reserve(devind);
|
|
|
|
getAddressing(devind, ec);
|
|
|
|
|
|
/* ===== Bus Master ? ===== */
|
|
pci_cmd = pci_attr_r32(devind, PCI_CR);
|
|
if (!(pci_cmd & PCI_COMMAND_MASTER)) {
|
|
pci_cmd |= PCI_COMMAND_MASTER;
|
|
pci_attr_w32(devind, PCI_CR, pci_cmd);
|
|
}
|
|
|
|
/* ===== Probe Details ===== */
|
|
ioaddr = ec->ec_port;
|
|
|
|
/* Reset */
|
|
in_word(ioaddr+LANCE_RESET);
|
|
|
|
if (read_csr(ioaddr, LANCE_CSR0) != LANCE_CSR0_STOP)
|
|
{
|
|
ec->mode=EC_DISABLED;
|
|
}
|
|
|
|
/* Probe Chip Version */
|
|
out_word(ioaddr+LANCE_ADDR, 88); /* Get the version of the chip */
|
|
if (in_word(ioaddr+LANCE_ADDR) != 88)
|
|
lance_version = 0;
|
|
else
|
|
{
|
|
chip_version = read_csr(ioaddr, LANCE_CSR88);
|
|
chip_version |= read_csr(ioaddr, LANCE_CSR89) << 16;
|
|
|
|
if ((chip_version & 0xfff) != 0x3)
|
|
{
|
|
ec->mode=EC_DISABLED;
|
|
}
|
|
chip_version = (chip_version >> 12) & 0xffff;
|
|
for (lance_version = 1; chip_table[lance_version].id_number != 0;
|
|
++lance_version)
|
|
if (chip_table[lance_version].id_number == chip_version)
|
|
break;
|
|
}
|
|
|
|
#if VERBOSE
|
|
printf("%s: %s at %X:%d\n",
|
|
ec->port_name, chip_table[lance_version].name,
|
|
ec->ec_port, ec->ec_irq);
|
|
#endif
|
|
|
|
return lance_version;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_getname *
|
|
*===========================================================================*/
|
|
static void do_getname(mp)
|
|
message *mp;
|
|
{
|
|
int r;
|
|
|
|
strncpy(mp->DL_NAME, progname, sizeof(mp->DL_NAME));
|
|
mp->DL_NAME[sizeof(mp->DL_NAME)-1]= '\0';
|
|
mp->m_type= DL_NAME_REPLY;
|
|
r= send(mp->m_source, mp);
|
|
if (r != OK)
|
|
panic("LANCE", "do_getname: send failed", r);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* lance_init_card *
|
|
*===========================================================================*/
|
|
static void lance_init_card(ec)
|
|
ether_card_t *ec;
|
|
{
|
|
int i;
|
|
Address l = (vir_bytes)lance_buf;
|
|
unsigned short ioaddr = ec->ec_port;
|
|
|
|
/* ============= setup init_block(cf. lance_probe1) ================ */
|
|
/* make sure data structure is 8-byte aligned and below 16MB (for DMA) */
|
|
|
|
lp = (struct lance_interface *)l;
|
|
|
|
/* disable Tx and Rx */
|
|
lp->init_block.mode = LANCE_CSR15_DTX|LANCE_CSR15_DRX;
|
|
lp->init_block.filter[0] = lp->init_block.filter[1] = 0x0;
|
|
/* using multiple Rx/Tx buffer */
|
|
lp->init_block.rx_ring
|
|
= (virt_to_bus(&lp->rx_ring) & 0xffffff) | RX_RING_LEN_BITS;
|
|
lp->init_block.tx_ring
|
|
= (virt_to_bus(&lp->tx_ring) & 0xffffff) | TX_RING_LEN_BITS;
|
|
|
|
l = virt_to_bus(&lp->init_block);
|
|
write_csr(ioaddr, LANCE_CSR1, (unsigned short)l);
|
|
write_csr(ioaddr, LANCE_CSR2, (unsigned short)(l >> 16));
|
|
write_csr(ioaddr, LANCE_CSR4,
|
|
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|
|
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
|
|
|
|
/* ============= Get MAC address (cf. lance_probe1) ================ */
|
|
for (i = 0; i < 6; ++i)
|
|
ec->mac_address.ea_addr[i]=in_byte(ioaddr+LANCE_ETH_ADDR+i);
|
|
|
|
/* ============ (re)start init_block(cf. lance_reset) =============== */
|
|
/* Reset the LANCE */
|
|
(void)in_word(ioaddr+LANCE_RESET);
|
|
|
|
/* ----- Re-initialize the LANCE ----- */
|
|
/* Set station address */
|
|
for (i = 0; i < 6; ++i)
|
|
lp->init_block.phys_addr[i] = ec->mac_address.ea_addr[i];
|
|
/* Preset the receive ring headers */
|
|
for (i=0; i<RX_RING_SIZE; i++)
|
|
{
|
|
lp->rx_ring[i].buf_length = -ETH_FRAME_LEN;
|
|
/* OWN */
|
|
lp->rx_ring[i].u.base = virt_to_bus(lp->rbuf[i]) & 0xffffff;
|
|
/* we set the top byte as the very last thing */
|
|
lp->rx_ring[i].u.addr[3] = 0x80;
|
|
}
|
|
/* Preset the transmitting ring headers */
|
|
for (i=0; i<TX_RING_SIZE; i++)
|
|
{
|
|
lp->tx_ring[i].u.base = 0;
|
|
isstored[i] = 0;
|
|
}
|
|
/* enable Rx and Tx */
|
|
lp->init_block.mode = 0x0;
|
|
|
|
l = (Address)virt_to_bus(&lp->init_block);
|
|
write_csr(ioaddr, LANCE_CSR1, (short)l);
|
|
write_csr(ioaddr, LANCE_CSR2, (short)(l >> 16));
|
|
write_csr(ioaddr, LANCE_CSR4,
|
|
LANCE_CSR4_APAD_XMT|LANCE_CSR4_MFCOM|LANCE_CSR4_RCVCCOM
|
|
|LANCE_CSR4_TXSTRTM|LANCE_CSR4_JABM);
|
|
|
|
/* ----- start when init done. ----- */
|
|
/* stop */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_STOP);
|
|
/* init */
|
|
write_csr(ioaddr, LANCE_CSR0, LANCE_CSR0_INIT);
|
|
/* poll for IDON */
|
|
for (i = 10000; i > 0; --i)
|
|
if (read_csr(ioaddr, LANCE_CSR0) & LANCE_CSR0_IDON)
|
|
break;
|
|
|
|
/* Set 'Multicast Table' */
|
|
for (i=0;i<4;++i)
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR8 + i, 0xffff);
|
|
}
|
|
|
|
/* Set 'Receive Mode' */
|
|
if (ec->flags & ECF_PROMISC)
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_PROM);
|
|
}
|
|
else
|
|
{
|
|
if (ec->flags & (ECF_BROAD | ECF_MULTI))
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, 0x0000);
|
|
}
|
|
else
|
|
{
|
|
write_csr(ioaddr, LANCE_CSR15, LANCE_CSR15_DRCVBC);
|
|
}
|
|
}
|
|
|
|
/* start && enable interrupt */
|
|
write_csr(ioaddr, LANCE_CSR0,
|
|
LANCE_CSR0_IDON|LANCE_CSR0_IENA|LANCE_CSR0_STRT);
|
|
|
|
return;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* in_byte *
|
|
*===========================================================================*/
|
|
static u8_t in_byte(port_t port)
|
|
{
|
|
int r;
|
|
u32_t value;
|
|
|
|
r= sys_inb(port, &value);
|
|
if (r != OK)
|
|
panic("lance","sys_inb failed", r);
|
|
return value;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* in_word *
|
|
*===========================================================================*/
|
|
static u16_t in_word(port_t port)
|
|
{
|
|
int r;
|
|
u32_t value;
|
|
|
|
r= sys_inw(port, &value);
|
|
if (r != OK)
|
|
panic("lance","sys_inw failed", r);
|
|
return value;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* out_byte *
|
|
*===========================================================================*/
|
|
static void out_byte(port_t port, u8_t value)
|
|
{
|
|
int r;
|
|
|
|
r= sys_outb(port, value);
|
|
if (r != OK)
|
|
panic("lance","sys_outb failed", r);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* out_word *
|
|
*===========================================================================*/
|
|
static void out_word(port_t port, u16_t value)
|
|
{
|
|
int r;
|
|
|
|
r= sys_outw(port, value);
|
|
if (r != OK)
|
|
panic("lance","sys_outw failed", r);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* read_csr *
|
|
*===========================================================================*/
|
|
static u16_t read_csr(port_t ioaddr, u16_t csrno)
|
|
{
|
|
out_word(ioaddr+LANCE_ADDR, csrno);
|
|
return in_word(ioaddr+LANCE_DATA);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* write_csr *
|
|
*===========================================================================*/
|
|
static void write_csr(port_t ioaddr, u16_t csrno, u16_t value)
|
|
{
|
|
out_word(ioaddr+LANCE_ADDR, csrno);
|
|
out_word(ioaddr+LANCE_DATA, value);
|
|
}
|