7f2d47d84c
Boot stuff dependencies from NetBSD. Patch by Antoine Leca. Relocated to src/sys. The port is using the same libminc.a as usual MINIX services (and does not use NetBSD libkern); the headers imported from NetBSD sys/ tree have been kept to a minimum (still numbers higher than 30 though.) Note the peculiar way to use libraries (libsa, libi386, etc.): the source code is shared, but each component builds its own copy of the library, with its own set of preprocessor defines.
155 lines
6.5 KiB
C
155 lines
6.5 KiB
C
/* $NetBSD: comreg.h,v 1.17 2011/05/28 19:30:19 matt Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)comreg.h 7.2 (Berkeley) 5/9/91
|
|
*/
|
|
|
|
#include <dev/ic/ns16550reg.h>
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_com.h"
|
|
#endif
|
|
|
|
#define COM_FREQ 1843200 /* 16-bit baud rate divisor */
|
|
#ifndef COM_TOLERANCE
|
|
#define COM_TOLERANCE 30 /* baud rate tolerance, in 0.1% units */
|
|
#endif
|
|
|
|
/* interrupt enable register */
|
|
#define IER_ERXRDY 0x1 /* Enable receiver interrupt */
|
|
#define IER_ETXRDY 0x2 /* Enable transmitter empty interrupt */
|
|
#define IER_ERLS 0x4 /* Enable line status interrupt */
|
|
#define IER_EMSC 0x8 /* Enable modem status interrupt */
|
|
#define IER_ERTS 0x40 /* Enable RTS interrupt */
|
|
#define IER_ECTS 0x80 /* Enable CTS interrupt */
|
|
/* PXA2X0's ns16550 ports have extra bits in this register */
|
|
#define IER_ERXTOUT 0x10 /* Enable rx timeout interrupt */
|
|
#define IER_EUART 0x40 /* Enable UART */
|
|
|
|
/* interrupt identification register */
|
|
#define IIR_IMASK 0xf
|
|
#define IIR_RXTOUT 0xc
|
|
#define IIR_RLS 0x6 /* Line status change */
|
|
#define IIR_RXRDY 0x4 /* Receiver ready */
|
|
#define IIR_TXRDY 0x2 /* Transmitter ready */
|
|
#define IIR_MLSC 0x0 /* Modem status */
|
|
#define IIR_NOPEND 0x1 /* No pending interrupts */
|
|
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
|
|
|
|
/* fifo control register */
|
|
#define FIFO_ENABLE 0x01 /* Turn the FIFO on */
|
|
#define FIFO_RCV_RST 0x02 /* Reset RX FIFO */
|
|
#define FIFO_XMT_RST 0x04 /* Reset TX FIFO */
|
|
#define FIFO_DMA_MODE 0x08
|
|
#define FIFO_TRIGGER_1 0x00 /* Trigger RXRDY intr on 1 character */
|
|
#define FIFO_TRIGGER_4 0x40 /* ibid 4 */
|
|
#define FIFO_TRIGGER_8 0x80 /* ibid 8 */
|
|
#define FIFO_TRIGGER_14 0xc0 /* ibid 14 */
|
|
|
|
/* enhanced feature register */
|
|
#define EFR_AUTOCTS 0x80 /* Automatic CTS flow control */
|
|
#define EFR_AUTORTS 0x40 /* Automatic RTS flow control */
|
|
#define EFR_SPECIAL 0x20 /* Special char detect */
|
|
#define EFR_EFCR 0x10 /* Enhanced function control bit */
|
|
#define EFR_TXFLOWBOTH 0x0c /* Automatic transmit XON/XOFF 1 and 2 */
|
|
#define EFR_TXFLOW1 0x08 /* Automatic transmit XON/XOFF 1 */
|
|
#define EFR_TXFLOW2 0x04 /* Automatic transmit XON/XOFF 2 */
|
|
#define EFR_TXFLOWNONE 0x00 /* No automatic XON/XOFF transmit */
|
|
#define EFR_RXFLOWBOTH 0x03 /* Automatic receive XON/XOFF 1 and 2 */
|
|
#define EFR_RXFLOW1 0x02 /* Automatic receive XON/XOFF 1 */
|
|
#define EFR_RXFLOW2 0x01 /* Automatic receive XON/XOFF 2 */
|
|
#define EFR_RXFLOWNONE 0x00 /* No automatic XON/XOFF receive */
|
|
|
|
/* line control register */
|
|
#define LCR_EERS 0xBF /* Enable access to Enhanced Register Set */
|
|
#define LCR_DLAB 0x80 /* Divisor latch access enable */
|
|
#define LCR_SBREAK 0x40 /* Break Control */
|
|
#define LCR_PZERO 0x38 /* Space parity */
|
|
#define LCR_PONE 0x28 /* Mark parity */
|
|
#define LCR_PEVEN 0x18 /* Even parity */
|
|
#define LCR_PODD 0x08 /* Odd parity */
|
|
#define LCR_PNONE 0x00 /* No parity */
|
|
#define LCR_PENAB 0x08 /* XXX - low order bit of all parity */
|
|
#define LCR_STOPB 0x04 /* 2 stop bits per serial word */
|
|
#define LCR_8BITS 0x03 /* 8 bits per serial word */
|
|
#define LCR_7BITS 0x02 /* 7 bits */
|
|
#define LCR_6BITS 0x01 /* 6 bits */
|
|
#define LCR_5BITS 0x00 /* 5 bits */
|
|
|
|
/* modem control register */
|
|
#define MCR_PRESCALE 0x80 /* 16650/16950: Baud rate prescaler select */
|
|
#define MCR_TCR_TLR 0x40 /* OMAP: enables access to the TCR & TLR regs */
|
|
#define MCR_XONENABLE 0x20 /* OMAP XON_EN */
|
|
#define MCR_LOOPBACK 0x10 /* Loop test: echos from TX to RX */
|
|
#define MCR_IENABLE 0x08 /* Out2: enables UART interrupts */
|
|
#define MCR_DRS 0x04 /* Out1: resets some internal modems */
|
|
#define MCR_RTS 0x02 /* Request To Send */
|
|
#define MCR_DTR 0x01 /* Data Terminal Ready */
|
|
|
|
/* line status register */
|
|
#define LSR_RCV_FIFO 0x80
|
|
#define LSR_TSRE 0x40 /* Transmitter empty: byte sent */
|
|
#define LSR_TXRDY 0x20 /* Transmitter buffer empty */
|
|
#define LSR_BI 0x10 /* Break detected */
|
|
#define LSR_FE 0x08 /* Framing error: bad stop bit */
|
|
#define LSR_PE 0x04 /* Parity error */
|
|
#define LSR_OE 0x02 /* Overrun, lost incoming byte */
|
|
#define LSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
|
|
#define LSR_RCV_MASK 0x1f /* Mask for incoming data or error */
|
|
|
|
/* modem status register */
|
|
/* All deltas are from the last read of the MSR. */
|
|
#define MSR_DCD 0x80 /* Current Data Carrier Detect */
|
|
#define MSR_RI 0x40 /* Current Ring Indicator */
|
|
#define MSR_DSR 0x20 /* Current Data Set Ready */
|
|
#define MSR_CTS 0x10 /* Current Clear to Send */
|
|
#define MSR_DDCD 0x08 /* DCD has changed state */
|
|
#define MSR_TERI 0x04 /* RI has toggled low to high */
|
|
#define MSR_DDSR 0x02 /* DSR has changed state */
|
|
#define MSR_DCTS 0x01 /* CTS has changed state */
|
|
|
|
/* OMAP mode definition register 1 */
|
|
#define MDR1_FRAME_END_MODE 0x80
|
|
#define MDR1_SIP_MODE 0x40
|
|
#define MDR1_SCT 0x20
|
|
#define MDR1_SET_TXIR 0x10
|
|
#define MDR1_IR_SLEEP 0x08
|
|
#define MDR1_MODE_DISABLE 0x07
|
|
#define MDR1_MODE_FIR 0x05
|
|
#define MDR1_MODE_MIR 0x04
|
|
#define MDR1_MODE_UART_13X 0x03
|
|
#define MDR1_MODE_UART_16X_AUTOBAUD 0x02
|
|
#define MDR1_MODE_SIR 0x01
|
|
#define MDR1_MODE_UART_16X 0x00
|
|
#define MDR1_MODE_MASK 0x07
|
|
|
|
|
|
/* XXX ISA-specific. */
|
|
#define COM_NPORTS 8
|