sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/drivers/ti1225/ti1225.c
David van Moolenbroek b4d909d415 Split block/character protocols and libdriver 
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.

The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.

After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
  in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
  reintroduced

As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.

Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
2011-11-23 14:06:37 +01:00

495 lines
10 KiB
C
Raw Blame History

/*
ti1225.c
Created: Dec 2005 by Philip Homburg
*/
#include <minix/drivers.h>
#include <minix/driver.h>
#include <machine/pci.h>
#include <machine/vm.h>
#include "ti1225.h"
#include "i82365.h"
/* The use of interrupts is not yet ready for prime time */
#define USE_INTS 0
#define NR_PORTS 2
PRIVATE struct port
{
unsigned p_flags;
int p_devind;
u8_t p_cb_busnr;
u16_t p_exca_port;
#if USE_INTS
int p_irq;
int p_hook;
#endif
char *base_ptr;
volatile struct csr *csr_ptr;
char buffer[2*I386_PAGE_SIZE];
} ports[NR_PORTS];
#define PF_PRESENT 1
struct pcitab
{
u16_t vid;
u16_t did;
int checkclass;
};
PRIVATE struct pcitab pcitab_ti[]=
{
{ 0x104C, 0xAC1C, 0 }, /* TI PCI1225 */
{ 0x0000, 0x0000, 0 }
};
PRIVATE char *progname;
PRIVATE int debug;
FORWARD _PROTOTYPE( void hw_init, (struct port *pp) );
FORWARD _PROTOTYPE( void map_regs, (struct port *pp, u32_t base) );
FORWARD _PROTOTYPE( void do_int, (struct port *pp) );
/* SEF functions and variables. */
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
/*===========================================================================*
* main *
*===========================================================================*/
int main(int argc, char *argv[])
{
int r;
message m;
int ipc_status;
/* SEF local startup. */
env_setargs(argc, argv);
sef_local_startup();
for (;;)
{
r= driver_receive(ANY, &m, &ipc_status);
if (r != OK)
panic("driver_receive failed: %d", r);
printf("ti1225: got message %u from %d\n",
m.m_type, m.m_source);
}
return 0;
}
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
PRIVATE void sef_local_startup()
{
/* Register init callbacks. */
sef_setcb_init_fresh(sef_cb_init_fresh);
sef_setcb_init_lu(sef_cb_init_fresh);
sef_setcb_init_restart(sef_cb_init_fresh);
/* Register live update callbacks. */
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_standard);
/* Let SEF perform startup. */
sef_startup();
}
/*===========================================================================*
* sef_cb_init_fresh *
*===========================================================================*/
PRIVATE int sef_cb_init_fresh(int UNUSED(type), sef_init_info_t *UNUSED(info))
{
/* Initialize the ti1225 driver. */
int c, i, r, first, devind, port;
u16_t vid, did;
(progname=strrchr(env_argv[0],'/')) ? progname++
: (progname=env_argv[0]);
if((r=tsc_calibrate()) != OK)
panic("tsc_calibrate failed: %d", r);
debug= 0;
while (c= getopt(env_argc, env_argv, "d?"), c != -1)
{
switch(c)
{
case '?': panic("Usage: ti1225 [-d]");
case 'd': debug++; break;
default: panic("getopt failed");
}
}
pci_init1(progname);
first= 1;
port= 0;
for (;;)
{
if (first)
{
first= 0;
r= pci_first_dev(&devind, &vid, &did);
}
else
r= pci_next_dev(&devind, &vid, &did);
if (r != 1)
break;
for (i= 0; pcitab_ti[i].vid != 0; i++)
{
if (pcitab_ti[i].vid != vid)
continue;
if (pcitab_ti[i].did != did)
continue;
if (pcitab_ti[i].checkclass) {
panic("fxp_probe: class check not implemented");
}
break;
}
if (pcitab_ti[i].vid == 0)
continue;
pci_reserve(devind);
if (debug)
printf("ti1225: found device %04x/%04x\n", vid, did);
ports[port].p_devind= devind;
ports[port].p_flags |= PF_PRESENT;
port++;
if (port >= NR_PORTS)
break;
}
for (i= 0; i<NR_PORTS; i++)
{
if (!(ports[i].p_flags & PF_PRESENT))
continue;
hw_init(&ports[i]);
}
return(OK);
}
PRIVATE void hw_init(struct port *pp)
{
int devind;
u8_t v8;
u16_t v16;
u32_t v32;
#if USE_INTS
int r, irq;
#endif
devind= pp->p_devind;
if (debug)
printf("hw_init: devind = %d\n", devind);
if (debug)
{
v16= pci_attr_r16(devind, PCI_CR);
printf("ti1225: command register 0x%x\n", v16);
}
v32= pci_attr_r32(devind, TI_CB_BASEADDR);
if (debug)
printf("ti1225: Cardbus/ExCA base address 0x%x\n", v32);
map_regs(pp, v32);
pp->csr_ptr= (struct csr *)pp->base_ptr;
if (debug)
{
v8= pci_attr_r8(devind, TI_PCI_BUS_NR);
printf("ti1225: PCI bus number %d\n", v8);
}
v8= pci_attr_r8(devind, TI_CB_BUS_NR);
pp->p_cb_busnr= v8;
if (debug)
{
printf("ti1225: CardBus bus number %d\n", v8);
v8= pci_attr_r8(devind, TI_SO_BUS_NR);
printf("ti1225: Subordinate bus number %d\n", v8);
}
#if USE_INTS
irq= pci_attr_r8(devind, PCI_ILR);
pp->p_irq= irq;
printf("ti1225 using IRQ %d\n", irq);
#endif
v32= pci_attr_r32(devind, TI_LEGACY_BA);
v32 &= ~1;
if (debug)
{
printf("ti1225: PC Card 16-bit legacy-mode base address 0x%x\n",
v32);
}
if (v32 == 0)
panic("bad legacy-mode base address: %d", v32);
pp->p_exca_port= v32;
if (debug)
{
v32= pci_attr_r32(devind, TI_MF_ROUTE);
printf("ti1225: Multifunction routing 0x%08x\n", v32);
}
#if USE_INTS
pp->p_hook = pp->p_irq;
r= sys_irqsetpolicy(pp->p_irq, 0, &pp->p_hook);
if (r != OK)
panic("sys_irqsetpolicy failed: %d", r);
#endif
/* Clear CBB_BC_INTEXCA */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
if (debug)
printf("ti1225: Bridge control 0x%04x\n", v16);
v16 &= ~CBB_BC_INTEXCA;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
if (debug)
{
v32= pci_attr_r32(devind, TI_SYSCTRL);
printf("ti1225: System Control Register 0x%08x\n", v32);
v8= pci_attr_r8(devind, TI_CARD_CTRL);
printf("ti1225: Card Control 0x%02x\n", v8);
v8= pci_attr_r8(devind, TI_DEV_CTRL);
printf("ti1225: Device Control 0x%02x\n", v8);
}
/* Enable socket interrupts */
pp->csr_ptr->csr_mask |= CM_PWRMASK | CM_CDMASK | CM_CSTSMASK;
do_int(pp);
#if USE_INTS
r= sys_irqenable(&pp->p_hook);
if (r != OK)
panic("unable enable interrupts: %d", r);
#endif
}
PRIVATE void map_regs(struct port *pp, u32_t base)
{
int r;
vir_bytes buf_base;
buf_base= (vir_bytes)pp->buffer;
if (buf_base % I386_PAGE_SIZE)
buf_base += I386_PAGE_SIZE-(buf_base % I386_PAGE_SIZE);
pp->base_ptr= (char *)buf_base;
if (debug)
{
printf("ti1225: map_regs: using %p for %p\n",
pp->base_ptr, pp->buffer);
}
/* Clear low order bits in base */
base &= ~(u32_t)0xF;
#if 0
r= sys_vm_map(SELF, 1 /* map */, (vir_bytes)pp->base_ptr,
I386_PAGE_SIZE, (phys_bytes)base);
#else
r = ENOSYS;
#endif
if (r != OK)
panic("map_regs: sys_vm_map failed: %d", r);
}
PRIVATE void do_int(struct port *pp)
{
int devind, vcc_5v, vcc_3v, vcc_Xv, vcc_Yv,
socket_5v, socket_3v, socket_Xv, socket_Yv;
spin_t spin;
u32_t csr_event, csr_present, csr_control;
u8_t v8;
u16_t v16;
#if USE_INTS
int r;
#endif
devind= pp->p_devind;
v8= pci_attr_r8(devind, TI_CARD_CTRL);
if (v8 & TI_CCR_IFG)
{
printf("ti1225: got functional interrupt\n");
pci_attr_w8(devind, TI_CARD_CTRL, v8);
}
if (debug)
{
printf("Socket event: 0x%x\n", pp->csr_ptr->csr_event);
printf("Socket mask: 0x%x\n", pp->csr_ptr->csr_mask);
}
csr_present= pp->csr_ptr->csr_present;
csr_control= pp->csr_ptr->csr_control;
if ((csr_present & (CP_CDETECT1|CP_CDETECT2)) != 0)
{
if (debug)
printf("do_int: no card present\n");
return;
}
if (csr_present & CP_BADVCCREQ)
{
printf("do_int: Bad Vcc request\n");
/* return; */
}
if (csr_present & CP_DATALOST)
{
/* Do we care? */
if (debug)
printf("do_int: Data lost\n");
/* return; */
}
if (csr_present & CP_NOTACARD)
{
printf("do_int: Not a card\n");
return;
}
if (debug)
{
if (csr_present & CP_CBCARD)
printf("do_int: Cardbus card detected\n");
if (csr_present & CP_16BITCARD)
printf("do_int: 16-bit card detected\n");
}
if (csr_present & CP_PWRCYCLE)
{
if (debug)
printf("do_int: powered up\n");
return;
}
vcc_5v= !!(csr_present & CP_5VCARD);
vcc_3v= !!(csr_present & CP_3VCARD);
vcc_Xv= !!(csr_present & CP_XVCARD);
vcc_Yv= !!(csr_present & CP_YVCARD);
if (debug)
{
printf("do_int: card supports:%s%s%s%s\n",
vcc_5v ? " 5V" : "", vcc_3v ? " 3V" : "",
vcc_Xv ? " X.X V" : "", vcc_Yv ? " Y.Y V" : "");
}
socket_5v= !!(csr_present & CP_5VSOCKET);
socket_3v= !!(csr_present & CP_3VSOCKET);
socket_Xv= !!(csr_present & CP_XVSOCKET);
socket_Yv= !!(csr_present & CP_YVSOCKET);
if (debug)
{
printf("do_int: socket supports:%s%s%s%s\n",
socket_5v ? " 5V" : "", socket_3v ? " 3V" : "",
socket_Xv ? " X.X V" : "", socket_Yv ? " Y.Y V" : "");
}
if (vcc_5v && socket_5v)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_5V;
pp->csr_ptr->csr_control= csr_control;
if (debug)
printf("do_int: applying 5V\n");
}
else if (vcc_3v && socket_3v)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_3V;
pp->csr_ptr->csr_control= csr_control;
if (debug)
printf("do_int: applying 3V\n");
}
else if (vcc_Xv && socket_Xv)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_XV;
pp->csr_ptr->csr_control= csr_control;
printf("do_int: applying X.X V\n");
}
else if (vcc_Yv && socket_Yv)
{
csr_control= (csr_control & ~CC_VCCCTRL) | CC_VCC_YV;
pp->csr_ptr->csr_control= csr_control;
printf("do_int: applying Y.Y V\n");
}
else
{
printf("do_int: socket and card are not compatible\n");
return;
}
csr_event= pp->csr_ptr->csr_event;
if (csr_event)
{
if (debug)
printf("clearing socket event\n");
pp->csr_ptr->csr_event= csr_event;
if (debug)
{
printf("Socket event (cleared): 0x%x\n",
pp->csr_ptr->csr_event);
}
}
devind= pp->p_devind;
v8= pci_attr_r8(devind, TI_CARD_CTRL);
if (v8 & TI_CCR_IFG)
{
printf("ti1225: got functional interrupt\n");
pci_attr_w8(devind, TI_CARD_CTRL, v8);
}
if (debug)
{
v8= pci_attr_r8(devind, TI_CARD_CTRL);
printf("TI_CARD_CTRL: 0x%02x\n", v8);
}
spin_init(&spin, 100000);
do {
csr_present= pp->csr_ptr->csr_present;
if (csr_present & CP_PWRCYCLE)
break;
} while (spin_check(&spin));
if (!(csr_present & CP_PWRCYCLE))
{
printf("do_int: not powered up?\n");
return;
}
/* Reset device */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
v16 |= CBB_BC_CRST;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
/* Wait one microsecond. Is this correct? What are the specs? */
micro_delay(1);
/* Clear CBB_BC_CRST */
v16= pci_attr_r16(devind, CBB_BRIDGECTRL);
v16 &= ~CBB_BC_CRST;
pci_attr_w16(devind, CBB_BRIDGECTRL, v16);
/* Wait one microsecond after clearing the reset line. Is this
* correct? What are the specs?
*/
micro_delay(1);
pci_rescan_bus(pp->p_cb_busnr);
#if USE_INTS
r= sys_irqenable(&pp->p_hook);
if (r != OK)
panic("unable enable interrupts: %d", r);
#endif
}
Reference in a new issue View git blame Copy permalink