minix/commands/dis88
Arun Thomas b0159ad168 Buildsystem changes for GCC
-Makefile updates
-Update mkdep
-Build fixes/warning cleanups for some programs
-Restore leading underscores on global syms in kernel asm files
-Increase ramdisk size
2010-05-19 13:24:15 +00:00
..
dis.h Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
disfp.c Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
dishand.c Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
dismain.c Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
disrel.c Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
distabs.c Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00
Makefile Buildsystem changes for GCC 2010-05-19 13:24:15 +00:00
README Removal of the executable flag from files that cannot be executed 2009-11-09 10:26:00 +00:00

                                     dis88
                                  Beta Release
                                    87/09/01
                                      ---
                                 G. M. HARDING
                                    POB 4142
                           Santa Clara CA  95054-0142


             "Dis88" is a symbolic disassembler for the Intel 8088 CPU,
        designed to run under the PC/IX  operating  system on an IBM XT
        or fully-compatible clone.  Its output is in the format of, and
        is completely compatible with, the PC/IX assembler,  "as".  The
        program is copyrighted by its author, but may be copied and re-
        distributed freely provided that complete source code, with all
        copyright notices, accompanies any distribution. This provision
        also applies to any  modifications you may make.  You are urged
        to comment such changes,  giving,  as a miminum,  your name and
        complete address.

             This release of the program is a beta release, which means
        that it has been  extensively,  but not  exhaustively,  tested.
        User comments, recommendations, and bug fixes are welcome.  The
        principal features of the current release are:

             (a)  The ability to  disassemble  any file in PC/IX object
        format, making full use of symbol and relocation information if
        it is present,  regardless of whether the file is executable or
        linkable,  and regardless of whether it has continuous or split
        I/D space;

             (b)  Automatic generation of synthetic labels when no sym-
        bol table is available; and

             (c)  Optional  output of address and object-code  informa-
        tion as assembler comment text.

             Limitations of the current release are:

             (a)  Numeric co-processor  (i.e., 8087)  mnemonics are not
        supported.  Instructions  for the co-processor are disassembled
        as CPU escape  sequences,  or as  interrupts,  depending on how
        they were assembled in the first place. This limitation will be
        addressed in a future release.

             (b)  Symbolic  references  within the object  file's  data
        segment are not supported. Thus, for example, if a data segment
        location is initialized to point to a text segment address,  no
        reference to a text segment symbol will be detected. This limi-
        tation is likely to remain in future  releases,  because object
        code does not, in most cases, contain sufficient information to
        allow meaningful interpretation of pure data.  (Note,  however,
        that  symbolic  references  to the data segment from within the
        text segment are always supported.)

             As a final caveat,  be aware that the PC/IX assembler does
        not recognize the  "esc"  mnemonic,  even though it refers to a
        completely  valid CPU operation  which is documented in all the
        Intel literature. Thus, the corresponding opcodes (0xd8 through
        0xdf) are disassembled as .byte directives. For reference, how-
        ever,  the syntactically-correct "esc" instruction is output as
        a comment.

             To build the disassembler program, transfer all the source
        files,  together with the Makefile,  to a suitable  (preferably
        empty) PC/IX directory. Then, simply type "make".

             To use dis88,  place it in a  directory  which  appears in
        your $PATH list.  It may then be invoked by name from  whatever
        directory you happen to be in.  As a minimum,  the program must
        be invoked with one command-line argument:  the name of the ob-
        ject file to be disassembled.  (Dis88 will complain if the file
        specified is not an object file.)  Optionally,  you may specify
        an output file; stdout is the default.  One command-line switch
        is available:  "-o",  which makes the program display addresses
        and object code along with its mnemonic disassembly.

             The "-o" option is useful primarily for verifying the cor-
        rectness of the program's output. In particular, it may be used
        to check the accuracy of local  relative  jump  opcodes.  These
        jumps often  target  local  labels,  which are lost at assembly
        time;  thus,  the disassembly may contain cryptic  instructions
        like "jnz .+39".  As a user convenience,  all relative jump and
        call  opcodes are output with a comment  which  identifies  the
        physical target address.

             By convention, the release level of the program as a whole
        is the SID of the file disrel.c, and this SID string appears in
        each disassembly.  Release 2.1 of the program is the first beta
        release to be distributed on Usenet.


.TH dis88 1 LOCAL
.SH "NAME"
dis88 \- 8088 symbolic disassembler
.SH "SYNOPSIS"
\fBdis88\fP [ -o ] ifile [ ofile ]
.SH "DESCRIPTION"
Dis88 reads ifile, which must be in PC/IX a.out format.
It interprets the binary opcodes and data locations, and
writes corresponding assembler source code to stdout, or
to ofile if specified.  The program's output is in the
format of, and fully compatible with, the PC/IX assembler,
as(1).  If a symbol table is present in ifile, labels and
references will be symbolic in the output.  If the input
file lacks a symbol table, the fact will be noted, and the
disassembly will proceed, with the disassembler generating
synthetic labels as needed.  If the input file has split
I/D space, or if it is executable, the disassembler will
make all necessary adjustments in address-reference calculations.
.PP
If the "-o" option appears, object code will be included
in comments during disassembly of the text segment.  This
feature is used primarily for debugging the disassembler
itself, but may provide information of passing interest
to users.
.PP
The program always outputs the current machine address
before disassembling an opcode.  If a symbol table is
present, this address is output as an assembler comment;
otherwise, it is incorporated into the synthetic label
which is generated internally.  Since relative jumps,
especially short ones, may target unlabelled locations,
the program always outputs the physical target address
as a comment, to assist the user in following the code.
.PP
The text segment of an object file is always padded to
an even machine address.  In addition, if the file has
split I/D space, the text segment will be padded to a
paragraph boundary (i.e., an address divisible by 16).
As a result of this padding, the disassembler may produce
a few spurious, but harmless, instructions at the
end of the text segment.
.PP
Disassembly of the data segment is a difficult matter.
The information to which initialized data refers cannot
be inferred from context, except in the special case
of an external data or address reference, which will be
reflected in the relocation table.  Internal data and
address references will already be resolved in the object file,
and cannot be recreated.  Therefore, the data
segment is disassembled as a byte stream, with long
stretches of null data represented by an appropriate
".zerow" pseudo-op.  This limitation notwithstanding,
labels (as opposed to symbolic references) are always
output at appropriate points within the data segment.
.PP
If disassembly of the data segment is difficult, disassembly of the
bss segment is quite easy, because uninitialized data is all
zero by definition.  No data
is output in the bss segment, but symbolic labels are
output as appropriate.
.PP
For each opcode which takes an operand, a particular
symbol type (text, data, or bss) is appropriate.  This
tidy correspondence is complicated somewhat, however,
by the existence of assembler symbolic constants and
segment override opcodes.  Therefore, the disassembler's
symbol lookup routine attempts to apply a certain amount
of intelligence when it is asked to find a symbol.  If
it cannot match on a symbol of the preferred type, it
may return a symbol of some other type, depending on
preassigned (and somewhat arbitrary) rankings within
each type.  Finally, if all else fails, it returns a
string containing the address sought as a hex constant;
this behavior allows calling routines to use the output
of the lookup function regardless of the success of its
search.
.PP
It is worth noting, at this point, that the symbol lookup
routine operates linearly, and has not been optimized in
any way.  Execution time is thus likely to increase
geometrically with input file size.  The disassembler is
internally limited to 1500 symbol table entries and 1500
relocation table entries; while these limits are generous
(/unix, itself, has fewer than 800 symbols), they are not
guaranteed to be adequate in all cases.  If the symbol
table or the relocation table overflows, the disassembly
aborts.
.PP
Finally, users should be aware of a bug in the assembler,
which causes it not to parse the "esc" mnemonic, even
though "esc" is a completely legitimate opcode which is
documented in all the Intel literature.  To accommodate
this deficiency, the disassembler translates opcodes of
the "esc" family to .byte directives, but notes the
correct mnemonic in a comment for reference.
.PP
In all cases, it should be possible to submit the output
of the disassembler program to the assembler, and assemble
it without error.  In most cases, the resulting object
code will be identical to the original; in any event, it
will be functionally equivalent.
.SH "SEE ALSO"
adb(1), as(1), cc(1), ld(1).
.br
"Assembler Reference Manual" in the PC/IX Programmer's
Guide.
.SH "DIAGNOSTICS"
"can't access input file" if the input file cannot be
found, opened, or read.
.sp
"can't open output file" if the output file cannot be
created.
.sp
"warning: host/cpu clash" if the program is run on a
machine with a different CPU.
.sp
"input file not in object format" if the magic number
does not correspond to that of a PC/IX object file.
.sp
"not an 8086/8088 object file" if the CPU ID of the
file header is incorrect.
.sp
"reloc table overflow" if there are more than 1500
entries in the relocation table.
.sp
"symbol table overflow" if there are more than 1500
entries in the symbol table.
.sp
"lseek error" if the input file is corrupted (should
never happen).
.sp
"warning: no symbols" if the symbol table is missing.
.sp
"can't reopen input file" if the input file is removed
or altered during program execution (should never happen).
.SH "BUGS"
Numeric co-processor (i.e., 8087) mnemonics are not currently supported.
Instructions for the co-processor are
disassembled as CPU escape sequences, or as interrupts,
depending on how they were assembled in the first place.
.sp
Despite the program's best efforts, a symbol retrieved
from the symbol table may sometimes be different from
the symbol used in the original assembly.
.sp
The disassembler's internal tables are of fixed size,
and the program aborts if they overflow.