minix/releasetools/uEnv.txt
Ben Gras 5acaa0814f kernel, ramdisk: some boot unification
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.

This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.

	. ramdisk: remove some arm-only utilities only used for running
	  from the shell
	. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
	  boot-time ramdisk files
	. change kernel to add "arch" variable so userland knows what
	  we're running on from sysenv
	. make ARM use the regular ramdisk rc file, changed to distinguish
	  i386-only and ARM-only drivers; requires rootdevname to be set
	. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
	  i386 systems
	. change the kernel/arm to have a special case for the memory
	  driver to load it higher so it can be bigger
	. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
	  SD preparation script arm_sdimage.sh to the git repository in
	  releasetools/

Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
2013-03-07 14:29:27 +00:00

21 lines
1.5 KiB
Text

#uEnv.txt
# Set the command to be executed
uenvcmd=run mmcbootcmd
# With cmdline/bootargs in cmdline.txt
mmcbootcmd=echo starting from MMC ; mmc part 0; fatload mmc 0:1 0x80200000 kernel.bin; fatload mmc 0:1 0x90000000 ds.elf; fatload mmc 0:1 0x90800000 rs.elf; fatload mmc 0:1 0x91000000 pm.elf; fatload mmc 0:1 0x91800000 sched.elf; fatload mmc 0:1 0x92000000 vfs.elf; fatload mmc 0:1 0x96800000 memory.elf; fatload mmc 0:1 0x93000000 log.elf; fatload mmc 0:1 0x93800000 tty.elf; fatload mmc 0:1 0x94000000 mfs.elf; fatload mmc 0:1 0x94800000 vm.elf; fatload mmc 0:1 0x95000000 pfs.elf; fatload mmc 0:1 0x95800000 init.elf; mw.b 0x96000000 0 16384; fatload mmc 0:1 0x96000000 cmdline.txt; go 0x80200000
# Netbooting.
#echo == Configure the server IP ==
#serverip=192.168.12.10
#ipaddr=192.168.12.62
#usbnet_devaddr=e8:03:9a:24:f9:10
#usbethaddr=e8:03:9a:24:f9:11
#mmcbootcmd=echo starting from TFTP; usb start ; tftp 0x80200000 kernel.bin; tftp 0x90000000 ds.elf; tftp 0x90800000 rs.elf; tftp 0x91000000 pm.elf; tftp 0x91800000 sched.elf; tftp 0x92000000 vfs.elf; tftp 0x96800000 memory.elf; tftp 0x93000000 log.elf; tftp 0x93800000 tty.elf; tftp 0x94000000 mfs.elf; tftp 0x94800000 vm.elf; tftp 0x95000000 pfs.elf; tftp 0x95800000 init.elf; mw.b 0x96000000 0 16384; tftp 0x96000000 cmdline.txt; dcache off ; icache off ; go 0x80200000
# For mmcinfo
#mmcbootcmd=mmcinfo; fatload mmc 0:1 0x80200000 boot.bin; go 0x80200000
# beaglebone
#mmc rescan; fatload mmc 0 0x80200000 kernel.bin; go 0x80200000