232 lines
5.5 KiB
Groff
232 lines
5.5 KiB
Groff
.TH SERIAL-IP 8
|
|
.SH NAME
|
|
serial-ip \- Serial IP (SLIP or PPP) setup
|
|
.SH DESCRIPTION
|
|
.de SP
|
|
.if t .sp 0.4
|
|
.if n .sp
|
|
..
|
|
\-\-\-\-\-\-\-
|
|
.br
|
|
.B Note:
|
|
This text and the serial IP code is not finished. Code needs to be added to
|
|
.B nonamed
|
|
to allow it to be used both with and without a connection to the Internet,
|
|
and by now there is a PPP program for standard Minix "out there" that will
|
|
change everything that is said in this text. So much to do, so little
|
|
time...
|
|
.br
|
|
\-\-\-\-\-\-\-
|
|
.PP
|
|
This manual page describes the Minix network setup to use serial line IP.
|
|
The serial IP protocol used can either be the older SLIP by means of the
|
|
.BR slip (8)
|
|
program, or PPP (Point-to-Point Protocol), the newer and better serial IP
|
|
protocol implemented by the
|
|
.BR ppp (8)
|
|
program. Alas standard Minix only supports SLIP.
|
|
.PP
|
|
In the following text all descriptions and examples will name SLIP or the
|
|
.BR slip
|
|
program, but one may just as well read PPP or
|
|
.BR ppp .
|
|
Where necessary the differences will be noted.
|
|
.PP
|
|
A typical use of the
|
|
.B slip
|
|
program is like this:
|
|
.PP
|
|
.RS
|
|
.B "slip /dev/psip2 </dev/tty01 >/dev/tty01"
|
|
.RE
|
|
.PP
|
|
The argument of the program, the
|
|
.B /dev/psip2
|
|
device, is one of the so-called "Pseudo IP" devices that the Minix TCP/IP
|
|
driver
|
|
.BR inet (8)
|
|
offers to implement a virtual network on. On an ethernet IP packets are
|
|
received or transmitted by the ethernet card, but packets on a pseudo IP
|
|
network are channeled back to or received from a program running in user
|
|
space, such as
|
|
.BR slip .
|
|
Standard input and output are used by
|
|
.B slip
|
|
to exchange packets with another SLIP implementation. This is normally
|
|
through an RS-232 serial line like the second serial line
|
|
.B /dev/tty01
|
|
as used in the example above.
|
|
.PP
|
|
If we look at the flow of data over normal ethernet then this is what a TCP
|
|
connection between two Minix machines,
|
|
.B telnet
|
|
for instance, looks like:
|
|
.PP
|
|
.in 0
|
|
.ce 13
|
|
[telnet]
|
|
|
|
|
/dev/tcp0
|
|
|
|
|
inet
|
|
|
|
|
[ethernet]
|
|
|
|
|
inet
|
|
|
|
|
/dev/tcp0
|
|
|
|
|
[in.telnetd]
|
|
.PP
|
|
One-half (!) of a SLIP connection would look like this:
|
|
.PP
|
|
.in 0
|
|
.ce 12
|
|
[telnet]
|
|
|
|
|
/dev/tcp2
|
|
|
|
|
inet
|
|
|
|
|
/dev/psip2
|
|
|
|
|
slip
|
|
|
|
|
[serial line]
|
|
\&...
|
|
.SS "Configuration for a SLIP network only"
|
|
It is important to know that as far as
|
|
.B inet
|
|
is concerned the pseudo IP network is just another network, nothing special.
|
|
So you have to convince
|
|
.B inet
|
|
that it has to send packets out over that network. One does this by
|
|
setting a default route that makes
|
|
.B inet
|
|
believe that there is a router somewhere on the pseudo-IP network.
|
|
.PP
|
|
Assume your machine has been given the IP address
|
|
.B 192.168.0.13
|
|
by your service provider. Let's choose another address on that network,
|
|
.B 192.168.0.1
|
|
for instance. (You can use the address of the SLIP gateway if you want
|
|
to make it look pretty, but it doesn't really matter, anything "out there"
|
|
is ok.)
|
|
To make Minix aware of the situation you have to configure the pseudo IP
|
|
network. For Minix-vmd you need to look for the
|
|
.B if-then-else-fi
|
|
code in
|
|
.B /usr/etc/rc
|
|
that tests if
|
|
.B /etc/rc.net
|
|
should be run. Copy the lines in the
|
|
.B else
|
|
clause that starts network daemons to
|
|
.B /etc/rc.net
|
|
and add the following lines to make it look like this:
|
|
.PP
|
|
.RS
|
|
.nf
|
|
# My SLIP interface address.
|
|
ifconfig -h 192.168.0.13 -n 255.255.255.0
|
|
.SP
|
|
# Standard network daemons.
|
|
daemonize rarpd $named irdpd rip inetd
|
|
.SP
|
|
# Default route to the outside world.
|
|
add_route -g 192.168.0.1
|
|
.fi
|
|
.RE
|
|
.PP
|
|
For standard Minix one has to edit
|
|
.B /etc/rc
|
|
instead at the point of the XXX comments. The
|
|
.B ifconfig
|
|
goes at the first XXX, the
|
|
.B add_route
|
|
at the second XXX. The result is conceptually the same as the example
|
|
above. The important thing is the order: Configuration, Daemons, Routes.
|
|
(First give addresses to the networks, let the daemons meditate over the
|
|
results and possibly configure more networks (rarpd), then add routes to
|
|
the configured networks.)
|
|
.PP
|
|
Just one thing left to do. The system uses the first ethernet network
|
|
.RB ( eth0 ,
|
|
.BR ip0 ,
|
|
.BR tcp0 ,
|
|
and
|
|
.BR udp0 )
|
|
as the default network. With the program
|
|
.BR netdefault (8)
|
|
you have to change the links to the default devices
|
|
.RB ( eth / psip ,
|
|
.BR ip ,
|
|
.BR tcp ,
|
|
and
|
|
.BR udp )
|
|
to point to the first pseudo IP network
|
|
.RB ( psip2 ,
|
|
.BR ip2 ,
|
|
.BR tcp2 ,
|
|
and
|
|
.BR udp2 ):
|
|
.PP
|
|
.RS
|
|
.B "netdefault psip2"
|
|
.RE
|
|
.PP
|
|
In
|
|
.B /etc/hosts
|
|
list at least
|
|
.B localhost
|
|
and the name of your machine with its SLIP address. This way your machine
|
|
will boot and know its own name. Now you need to find a way to let your
|
|
system know the addresses of other machines. There are three ways:
|
|
.PP
|
|
.RS
|
|
List the names and addresses of any other machine you wish to talk
|
|
to in
|
|
.BR /etc/hosts .
|
|
Drawback: This will quickly become a pretty long list.
|
|
.SP
|
|
Create an
|
|
.B /etc/resolv.conf
|
|
that lists a nameserver at your ISP and
|
|
.B 127.0.0.1
|
|
(localhost). Drawback: With the SLIP link down it takes 5 to 10 seconds for
|
|
a name lookup to time out on the remote name server before the local name
|
|
server is tried.
|
|
.SP
|
|
Install the above
|
|
.B /etc/resolv.conf
|
|
when
|
|
.B slip
|
|
is started, and remove it when
|
|
.B slip
|
|
exits. Drawback: Long running programs only read
|
|
.B /etc/resolv.conf
|
|
at startup, so they don't notice it changing.
|
|
.SP
|
|
Run a real Internet name daemon from the
|
|
.B named
|
|
package. Drawback: Nontrivial to set up.
|
|
.SS "Configuration for a SLIP - Ethernet router (simple case)"
|
|
XXX
|
|
.SS "Configuration for a SLIP - Ethernet router (complex case)"
|
|
XXX
|
|
.SH FILES
|
|
.TP \w'/dev/psip*'u+5n
|
|
.B /dev/psip*
|
|
Pseudo-IP devices for use by
|
|
.BR slip
|
|
and
|
|
.BR ppp .
|
|
.SH "SEE ALSO"
|
|
.BR boot (8),
|
|
.BR inet (8),
|
|
.BR netdefault (8),
|
|
.BR term (1),
|
|
.BR chat (1).
|
|
.SH BUGS
|
|
.SH AUTHOR
|
|
Kees J. Bot (kjb@cs.vu.nl)
|