minix/lib/libgpio/gpio_omap.c
Kees Jongenburger 6f4a88c1d2 arm:fix GPIO revision check on DM37XX.
The GPIO revision check assumed the major and minor revision numbers where
located at same location in the register. This is not true.

Change-Id: Ieaff07ed8a19e6b4cf1d121a41d3290880b78a82
2014-01-20 09:33:16 +01:00

551 lines
13 KiB
C

/* kernel headers */
#include <minix/syslib.h>
#include <minix/drvlib.h>
#include <minix/log.h>
#include <minix/mmio.h>
#include <minix/gpio.h>
#include <minix/clkconf.h>
#include <minix/type.h>
#include <minix/board.h>
/* system headers */
#include <sys/mman.h>
#include <sys/types.h>
/* usr headers */
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
/* local headers */
#include "gpio_omap.h"
/* used for logging */
static struct log log = {
.name = "gpio_omap",
.log_level = LEVEL_INFO,
.log_func = default_log
};
struct gpio_driver
{
/* request access to a gpio */
int (*claim) (char *owner, int nr, struct gpio ** gpio);
/* Configure the GPIO for a certain purpose */
int (*pin_mode) (struct gpio * gpio, int mode);
/* Set the value for a GPIO */
int (*set) (struct gpio * gpio, int value);
/* Read the current value of the GPIO */
int (*read) (struct gpio * gpio, int *value);
/* Read and clear the value interrupt value of the GPIO */
int (*intr_read) (struct gpio * gpio, int *value);
/* Interrupt hook */
int (*message_hook) (message * m);
};
static struct gpio_driver drv;
struct omap_gpio_bank
{
const char *name;
uint32_t register_address;
uint32_t irq_nr; /* irq number */
uint32_t base_address;
int32_t disabled;
int irq_id; /* original hook id??? */
int irq_hook_id; /* hook id */
uint32_t inter_values; /* values when the interrupt was called */
};
static struct omap_gpio_bank *omap_gpio_banks;
static struct omap_gpio_bank am335x_gpio_banks[] = {
{
.name = "GPIO0",
.register_address = AM335X_GPIO0_BASE,
.irq_nr = AM335X_GPIO0A_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = AM335X_GPIO0A_IRQ_HOOK_ID,
.irq_hook_id = AM335X_GPIO0A_IRQ_HOOK_ID,
},
{
.name = "GPIO1",
.register_address = AM335X_GPIO1_BASE,
.irq_nr = AM335X_GPIO1A_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = AM335X_GPIO1A_IRQ_HOOK_ID,
.irq_hook_id = AM335X_GPIO1A_IRQ_HOOK_ID,
},
{
.name = "GPIO2",
.register_address = AM335X_GPIO2_BASE,
.irq_nr = AM335X_GPIO2A_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = AM335X_GPIO2A_IRQ_HOOK_ID,
.irq_hook_id = AM335X_GPIO2A_IRQ_HOOK_ID,
},
{
.name = "GPIO3",
.register_address = AM335X_GPIO3_BASE,
.irq_nr = AM335X_GPIO3A_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = AM335X_GPIO3A_IRQ_HOOK_ID,
.irq_hook_id = AM335X_GPIO3A_IRQ_HOOK_ID,
},
{NULL, 0, 0, 0, 0, 0, 0, 0 }
};
static struct omap_gpio_bank dm37xx_gpio_banks[] = {
{
.name = "GPIO1",
.register_address = DM37XX_GPIO1_BASE,
.irq_nr = DM37XX_GPIO1_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO1_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO1_IRQ_HOOK_ID,
},
{
.name = "GPIO2",
.register_address = DM37XX_GPIO2_BASE,
.irq_nr = DM37XX_GPIO2_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO2_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO2_IRQ_HOOK_ID,
},
{
.name = "GPIO3",
.register_address = DM37XX_GPIO3_BASE,
.irq_nr = DM37XX_GPIO3_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO3_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO3_IRQ_HOOK_ID,
},
{
.name = "GPIO4",
.register_address = DM37XX_GPIO4_BASE,
.irq_nr = DM37XX_GPIO4_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO4_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO4_IRQ_HOOK_ID,
},
{
.name = "GPIO5",
.register_address = DM37XX_GPIO5_BASE,
.irq_nr = DM37XX_GPIO5_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO5_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO5_IRQ_HOOK_ID,
},
{
.name = "GPIO6",
.register_address = DM37XX_GPIO6_BASE,
.irq_nr = DM37XX_GPIO6_IRQ,
.base_address = 0,
.disabled = 0,
.irq_id = DM37XX_GPIO6_IRQ_HOOK_ID,
.irq_hook_id = DM37XX_GPIO6_IRQ_HOOK_ID,
},
{NULL, 0, 0, 0, 0, 0, 0, 0 }
};
static int nbanks; /* number of banks */
/*
* Defines the set of registers. There is a lot of commonality between the
* AM335X and DM37XX gpio registers. To avoid ifdefs everywhere, we define
* a central register set and only use ifdefs where they differ.
*/
typedef struct gpio_omap_registers {
vir_bytes REVISION;
vir_bytes IRQENABLE;
vir_bytes IRQSTATUS;
vir_bytes DATAOUT;
vir_bytes DATAIN;
vir_bytes OE;
vir_bytes RISINGDETECT;
vir_bytes FALLINGDETECT;
vir_bytes CLEARDATAOUT;
vir_bytes SETDATAOUT;
} gpio_omap_regs_t;
/* Define the registers for each chip */
gpio_omap_regs_t gpio_omap_dm37xx = {
.REVISION = DM37XX_GPIO_REVISION,
.IRQENABLE = DM37XX_GPIO_IRQENABLE1,
.IRQSTATUS = DM37XX_GPIO_IRQSTATUS1,
.DATAOUT = DM37XX_GPIO_DATAOUT,
.DATAIN = DM37XX_GPIO_DATAIN,
.OE = DM37XX_GPIO_OE,
.RISINGDETECT = DM37XX_GPIO_RISINGDETECT1,
.FALLINGDETECT = DM37XX_GPIO_FALLINGDETECT1,
.CLEARDATAOUT = DM37XX_GPIO_CLEARDATAOUT,
.SETDATAOUT = DM37XX_GPIO_SETDATAOUT
};
gpio_omap_regs_t gpio_omap_am335x = {
.REVISION = AM335X_GPIO_REVISION,
.IRQENABLE = AM335X_GPIO_IRQSTATUS_SET_0,
.IRQSTATUS = AM335X_GPIO_IRQSTATUS_0,
.DATAOUT = AM335X_GPIO_DATAOUT,
.DATAIN = AM335X_GPIO_DATAIN,
.OE = AM335X_GPIO_OE,
.RISINGDETECT = AM335X_GPIO_RISINGDETECT,
.FALLINGDETECT = AM335X_GPIO_FALLINGDETECT,
.CLEARDATAOUT = AM335X_GPIO_CLEARDATAOUT,
.SETDATAOUT = AM335X_GPIO_SETDATAOUT
};
static gpio_omap_regs_t *regs;
static struct omap_gpio_bank *
omap_gpio_bank_get(int gpio_nr)
{
struct omap_gpio_bank *bank;
assert(gpio_nr >= 0 && gpio_nr <= 32 * nbanks);
bank = &omap_gpio_banks[gpio_nr / 32];
return bank;
}
static int
omap_gpio_claim(char *owner, int nr, struct gpio **gpio)
{
log_trace(&log, "%s s claiming %d\n", owner, nr);
if (nr < 0 && nr >= 32 * nbanks) {
log_warn(&log, "%s is claiming unknown GPIO number %d\n",
owner, nr);
return EINVAL;
}
if (omap_gpio_bank_get(nr)->disabled == 1) {
log_warn(&log, "%s is claiming GPIO %d from disabled bank\n",
owner, nr);
return EINVAL;
}
struct gpio *tmp = malloc(sizeof(struct gpio));
memset(tmp, 0, sizeof(*tmp));
tmp->nr = nr;
*gpio = tmp;
return OK;
}
static int
omap_gpio_pin_mode(struct gpio *gpio, int mode)
{
struct omap_gpio_bank *bank;
assert(gpio != NULL);
gpio->mode = mode;
bank = omap_gpio_bank_get(gpio->nr);
log_debug(&log,
"pin mode bank %s, base address 0x%x -> register address (0x%x,0x%x,0x%x)\n",
bank->name, bank->base_address, bank->register_address, regs->OE,
bank->register_address + regs->OE);
if (mode == GPIO_MODE_OUTPUT) {
set32(bank->base_address + regs->OE, BIT(gpio->nr % 32), 0);
} else {
set32(bank->base_address + regs->FALLINGDETECT,
BIT(gpio->nr % 32), 0xffffffff);
set32(bank->base_address + regs->IRQENABLE, BIT(gpio->nr % 32),
0xffffffff);
set32(bank->base_address + regs->OE, BIT(gpio->nr % 32),
0xffffffff);
}
return 0;
}
static int
omap_gpio_set(struct gpio *gpio, int value)
{
struct omap_gpio_bank *bank;
assert(gpio != NULL);
assert(gpio->nr >= 0 && gpio->nr <= 32 * nbanks);
bank = omap_gpio_bank_get(gpio->nr);
if (value == 1) {
write32(bank->base_address + regs->SETDATAOUT,
BIT(gpio->nr % 32));
} else {
write32(bank->base_address + regs->CLEARDATAOUT,
BIT(gpio->nr % 32));
}
return OK;
}
static int
omap_gpio_read(struct gpio *gpio, int *value)
{
struct omap_gpio_bank *bank;
assert(gpio != NULL);
assert(gpio->nr >= 0 && gpio->nr <= 32 * nbanks);
bank = omap_gpio_bank_get(gpio->nr);
log_trace(&log, "mode=%d OU/IN 0x%08x 0x%08x\n", gpio->mode,
read32(bank->base_address + regs->DATAIN),
read32(bank->base_address + regs->DATAOUT));
if (gpio->mode == GPIO_MODE_INPUT) {
*value =
(read32(bank->base_address +
regs->DATAIN) >> (gpio->nr % 32)) & 0x1;
} else {
*value =
(read32(bank->base_address +
regs->DATAOUT) >> (gpio->nr % 32)) & 0x1;
}
return OK;
}
static int
omap_gpio_intr_read(struct gpio *gpio, int *value)
{
struct omap_gpio_bank *bank;
assert(gpio != NULL);
assert(gpio->nr >= 0 && gpio->nr <= 32 * nbanks);
bank = omap_gpio_bank_get(gpio->nr);
/* TODO: check if interrupt where enabled?? */
*value = (bank->inter_values >> (gpio->nr % 32)) & 0x1;
/* clear the data */
bank->inter_values &= ~(1 << (gpio->nr % 32));
return OK;
}
static int
omap_message_hook(message * m)
{
unsigned long irq_set, i;
struct omap_gpio_bank *bank;
switch (_ENDPOINT_P(m->m_source)) {
case HARDWARE:
/* Hardware interrupt return a "set" if pending interrupts */
irq_set = m->NOTIFY_ARG;
log_debug(&log, "HW message 0X%08x\n", m->NOTIFY_ARG);
bank = &omap_gpio_banks[0];
for (i = 0; omap_gpio_banks[i].name != NULL; i++) {
bank = &omap_gpio_banks[i];
if (irq_set & (1 << (bank->irq_id))) {
log_trace(&log, "Interrupt for bank %s\n",
bank->name);
bank->inter_values |=
read32(bank->base_address +
regs->IRQSTATUS);
/* clear the interrupts */
write32(bank->base_address + regs->IRQSTATUS,
0xffffffff);
if (sys_irqenable(&bank->irq_hook_id) != OK) {
log_warn(&log,
"Failed to enable irq for bank %s\n",
bank->name);
}
}
}
return OK;
default:
log_debug(&log, "Unknown message\n");
break;
}
return OK;
}
static int revision_matches(u32_t board_id,u32_t rev) {
/* figures out if the collected resition matches the one expected
* from the board */
if (BOARD_IS_BBXM(board_id)){
if(
DM37XX_GPIO_REVISION_MAJOR(rev) != 2
|| DM37XX_GPIO_REVISION_MINOR(rev) != 5
) {
return 0;
}
} else if (BOARD_IS_BB(board_id)){
if (
AM335X_GPIO_REVISION_MAJOR(rev) != 0
|| AM335X_GPIO_REVISION_MINOR(rev) != 1
) {
return 0;
}
}
return 1;
}
static int
omap_gpio_init(struct gpio_driver *gpdrv)
{
u32_t revision;
int i;
struct minix_mem_range mr;
struct omap_gpio_bank *bank;
struct machine machine;
sys_getmachine(&machine);
nbanks =0;
omap_gpio_banks = NULL;
if (BOARD_IS_BBXM(machine.board_id)){
omap_gpio_banks = dm37xx_gpio_banks;
regs = &gpio_omap_dm37xx;
} else if (BOARD_IS_BB(machine.board_id)){
omap_gpio_banks = am335x_gpio_banks;
regs = &gpio_omap_am335x;
}
bank = &omap_gpio_banks[0];
for (i = 0; omap_gpio_banks[i].name != NULL; i++) {
nbanks++;
bank = &omap_gpio_banks[i];
mr.mr_base = bank->register_address;
mr.mr_limit = bank->register_address + 0x400;
if (sys_privctl(SELF, SYS_PRIV_ADD_MEM, &mr) != 0) {
log_warn(&log,
"Unable to request permission to map memory\n");
return EPERM; /* fixme */
}
/* Set the base address to use */
bank->base_address =
(uint32_t) vm_map_phys(SELF,
(void *) bank->register_address, 0x400);
if (bank->base_address == (uint32_t) MAP_FAILED) {
log_warn(&log, "Unable to map GPIO memory\n");
return EPERM; /* fixme */
}
revision = read32(bank->base_address + regs->REVISION);
/* test if we can access it */
if (! revision_matches(machine.board_id,revision)) {
log_warn(&log,
"Failed to read the revision of GPIO bank %s.. disabling\n",
bank->name);
log_warn(&log, "Got 0x%x\n", revision);
bank->disabled = 1;
} else {
bank->disabled = 0;
}
if (sys_irqsetpolicy(bank->irq_nr, 0,
&bank->irq_hook_id) != OK) {
log_warn(&log,
"GPIO: couldn't set IRQ policy for bank %s\n",
bank->name);
continue;
};
if (bank->irq_id != bank->irq_hook_id) {
log_debug(&log, "requested id %d but got id %d\n",
bank->irq_id, bank->irq_hook_id);
}
if (sys_irqenable(&bank->irq_hook_id) != OK) {
log_warn(&log,
"GPIO: couldn't enable interrupt for %s\n",
bank->name);
};
log_trace(&log, "bank %s mapped on 0x%x with irq hook id %d\n",
bank->name, bank->base_address, bank->irq_hook_id);
};
clkconf_init();
if (BOARD_IS_BBXM(machine.board_id)){
/* enable the interface and functional clock on GPIO bank 1 , this only
applies to the Beagelboard XM */
clkconf_set(CM_FCLKEN_WKUP, BIT(3), 0xffffffff);
clkconf_set(CM_ICLKEN_WKUP, BIT(3), 0xffffffff);
}
clkconf_release();
gpdrv->claim = omap_gpio_claim;
gpdrv->pin_mode = omap_gpio_pin_mode;
gpdrv->set = omap_gpio_set;
gpdrv->read = omap_gpio_read;
gpdrv->intr_read = omap_gpio_intr_read;
gpdrv->message_hook = omap_message_hook;
return 0;
}
int
gpio_init()
{
return omap_gpio_init(&drv);
}
/* request access to a gpio */
int
gpio_claim(char *owner, int nr, struct gpio **gpio)
{
return drv.claim(owner, nr, gpio);
}
/* Configure the GPIO for a certain purpose */
int
gpio_pin_mode(struct gpio *gpio, int mode)
{
return drv.pin_mode(gpio, mode);
}
/* Set the value for a GPIO */
int
gpio_set(struct gpio *gpio, int value)
{
return drv.set(gpio, value);
}
/* Read the current value of the GPIO */
int
gpio_read(struct gpio *gpio, int *value)
{
return drv.read(gpio, value);
}
/* Read and clear the value interrupt value of the GPIO */
int
gpio_intr_read(struct gpio *gpio, int *value)
{
return drv.intr_read(gpio, value);
}
/* Interrupt hook */
int
gpio_intr_message(message * m)
{
return drv.message_hook(m);
}
int
gpio_release(void)
{
return OK;
}