72 lines
2.2 KiB
Groff
72 lines
2.2 KiB
Groff
." Automatically generated text
|
|
.TH 7 "August 31, 2006" "OSS" "OSS Devices"
|
|
.SH NAME
|
|
oss_digi96 - RME Digi96 professional audio driver.
|
|
|
|
.SH DESCRIPTION
|
|
Audio driver for the RME Digi96 family of profressional audio controllers.
|
|
- Only 16 and 24/32 bit audio formats are supported.
|
|
- All Digi96 family members support 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and
|
|
96kHz. sampling rates.
|
|
|
|
|
|
.SH MIXER PANEL
|
|
|
|
Note! For recording you need to set digi96.sync to INTERNAL and the values
|
|
of digi96.mode and digi96.input to match your studio setup. Otherwise
|
|
recordings will fail with I/O error.
|
|
|
|
There are several settings that can be changed using the ossmix program
|
|
shipped with OSS. Note that some features don't work with all Digi96
|
|
family members. For example ADAT mode is not supported by the base
|
|
model.
|
|
|
|
.IP \(bu 3
|
|
digi96.mode <SPDIF|AESEBU|ADAT>:
|
|
This setting controls the output mode which can be S/PDIF (consumer),
|
|
AES/EBU (professional) or ADAT. The input mode is detected automatically.
|
|
If ADAT input is detected the output mode will be switched to ADAT
|
|
automatically (this doesn't work in the other direction).
|
|
|
|
.IP \(bu 3
|
|
digi96.sync <EXTERNAL|INTERNAL>:
|
|
This setting tells if the playback sampling rate is based on the internal
|
|
oscillator or the sample rate detected in the input port. See also the
|
|
definition of the digi96.worldclk setting.
|
|
|
|
.IP \(bu 3
|
|
digi96.input <OPTICAL|COAXIAL|INTERNAL|XLR>: Selects the active input.
|
|
|
|
.IP \(bu 3
|
|
digi96.sel <BYPASS|NORMAL>:
|
|
When set to BYPASS the input signal will be routed directly to the
|
|
output (also sets digi96.sync automatically to EXTERNAL). In this mode
|
|
audio data written to /dev/dsp will be muted.
|
|
|
|
.IP \(bu 3
|
|
digi96.worldclk ON|OFF:
|
|
Setting this control to ON will enable the optional worldclock input as
|
|
the sample rate source (overrides the digi96.sync setting).
|
|
|
|
.IP \(bu 3
|
|
digi96.emph ON|OFF:
|
|
Enables/disables the de-emphasis option on the analog (monitor) output
|
|
connector.
|
|
|
|
.IP \(bu 3
|
|
digi96.data <AUDIO|AC3>:
|
|
Specifies if the output signal is audio or AC3 data (sets the non-audio
|
|
bit in the channel status data).
|
|
|
|
|
|
.SH OPTIONS
|
|
None
|
|
|
|
.SH FILES
|
|
/usr/lib/oss/conf/oss_digi96.conf Device configuration file
|
|
|
|
.SH AUTHOR
|
|
4Front Technologies
|
|
|
|
|
|
|