sanchayanmaity/minix
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
minix/drivers/dp8390/ne2000.c
Arun Thomas 436d6012a3 Convert drivers/ and servers/ over to bsdmake 
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00

331 lines
7.4 KiB
C
Raw Blame History

/*
ne2000.c
Driver for the ne2000 ethernet cards. This file contains only the ne2000
specific code, the rest is in dp8390.c
Created: March 15, 1994 by Philip Homburg <philip@f-mnx.phicoh.com>
*/
#include <minix/drivers.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
#if __minix_vmd
#include "config.h"
#endif
#include "local.h"
#include "dp8390.h"
#include "ne2000.h"
#if ENABLE_NE2000
#define N 100
extern u32_t system_hz;
#define MILLIS_TO_TICKS(m) (((m)*system_hz/1000)+1)
_PROTOTYPE( typedef int (*testf_t), (dpeth_t *dep, int pos, u8_t *pat) );
PRIVATE u8_t pat0[]= { 0x00, 0x00, 0x00, 0x00 };
PRIVATE u8_t pat1[]= { 0xFF, 0xFF, 0xFF, 0xFF };
PRIVATE u8_t pat2[]= { 0xA5, 0x5A, 0x69, 0x96 };
PRIVATE u8_t pat3[]= { 0x96, 0x69, 0x5A, 0xA5 };
_PROTOTYPE( static int test_8, (dpeth_t *dep, int pos, u8_t *pat) );
_PROTOTYPE( static int test_16, (dpeth_t *dep, int pos, u8_t *pat) );
_PROTOTYPE( static void ne_stop, (dpeth_t *dep) );
_PROTOTYPE( static void milli_delay, (unsigned long millis) );
/*===========================================================================*
* ne_probe *
*===========================================================================*/
int ne_probe(dpeth_t *dep)
{
int byte;
int i;
int loc1, loc2;
testf_t f;
dep->de_dp8390_port= dep->de_base_port + NE_DP8390;
/* We probe for an ne1000 or an ne2000 by testing whether the
* on board is reachable through the dp8390. Note that the
* ne1000 is an 8bit card and has a memory region distict from
* the 16bit ne2000
*/
for (dep->de_16bit= 0; dep->de_16bit < 2; dep->de_16bit++)
{
/* Reset the ethernet card */
byte= inb_ne(dep, NE_RESET);
milli_delay(2);
outb_ne(dep, NE_RESET, byte);
milli_delay(2);
/* Reset the dp8390 */
outb_reg0(dep, DP_CR, CR_STP | CR_DM_ABORT);
for (i= 0; i < 0x1000 && ((inb_reg0(dep, DP_ISR) & ISR_RST) == 0); i++)
; /* Do nothing */
/* Check if the dp8390 is really there */
if ((inb_reg0(dep, DP_CR) & (CR_STP|CR_DM_ABORT)) !=
(CR_STP|CR_DM_ABORT))
{
return 0;
}
/* Disable the receiver and init TCR and DCR. */
outb_reg0(dep, DP_RCR, RCR_MON);
outb_reg0(dep, DP_TCR, TCR_NORMAL);
if (dep->de_16bit)
{
outb_reg0(dep, DP_DCR, DCR_WORDWIDE | DCR_8BYTES |
DCR_BMS);
}
else
{
outb_reg0(dep, DP_DCR, DCR_BYTEWIDE | DCR_8BYTES |
DCR_BMS);
}
if (dep->de_16bit)
{
loc1= NE2000_START;
loc2= NE2000_START + NE2000_SIZE - 4;
f= test_16;
}
else
{
loc1= NE1000_START;
loc2= NE1000_START + NE1000_SIZE - 4;
f= test_8;
}
if (f(dep, loc1, pat0) && f(dep, loc1, pat1) &&
f(dep, loc1, pat2) && f(dep, loc1, pat3) &&
f(dep, loc2, pat0) && f(dep, loc2, pat1) &&
f(dep, loc2, pat2) && f(dep, loc2, pat3))
{
/* We don't need a memory segment */
dep->de_linmem= 0;
if (!dep->de_pci)
dep->de_initf= ne_init;
dep->de_stopf= ne_stop;
dep->de_prog_IO= 1;
return 1;
}
}
return 0;
}
/*===========================================================================*
* ne_init *
*===========================================================================*/
void ne_init(dep)
dpeth_t *dep;
{
int i;
int word, sendq_nr;
/* Setup a transfer to get the ethernet address. */
if (dep->de_16bit)
outb_reg0(dep, DP_RBCR0, 6*2);
else
outb_reg0(dep, DP_RBCR0, 6);
outb_reg0(dep, DP_RBCR1, 0);
outb_reg0(dep, DP_RSAR0, 0);
outb_reg0(dep, DP_RSAR1, 0);
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
for (i= 0; i<6; i++)
{
if (dep->de_16bit)
{
word= inw_ne(dep, NE_DATA);
dep->de_address.ea_addr[i]= word;
}
else
{
dep->de_address.ea_addr[i] = inb_ne(dep, NE_DATA);
}
}
dep->de_data_port= dep->de_base_port + NE_DATA;
if (dep->de_16bit)
{
dep->de_ramsize= NE2000_SIZE;
dep->de_offset_page= NE2000_START / DP_PAGESIZE;
}
else
{
dep->de_ramsize= NE1000_SIZE;
dep->de_offset_page= NE1000_START / DP_PAGESIZE;
}
/* Allocate one send buffer (1.5KB) per 8KB of on board memory. */
sendq_nr= dep->de_ramsize / 0x2000;
if (sendq_nr < 1)
sendq_nr= 1;
else if (sendq_nr > SENDQ_NR)
sendq_nr= SENDQ_NR;
dep->de_sendq_nr= sendq_nr;
for (i= 0; i<sendq_nr; i++)
{
dep->de_sendq[i].sq_sendpage= dep->de_offset_page +
i*SENDQ_PAGES;
}
dep->de_startpage= dep->de_offset_page + i*SENDQ_PAGES;
dep->de_stoppage= dep->de_offset_page + dep->de_ramsize / DP_PAGESIZE;
/* Can't override the default IRQ. */
dep->de_irq &= ~DEI_DEFAULT;
if (!debug)
{
printf("%s: NE%d000 at %X:%d\n",
dep->de_name, dep->de_16bit ? 2 : 1,
dep->de_base_port, dep->de_irq);
}
else
{
printf("%s: Novell NE%d000 ethernet card at I/O address "
"0x%X, memory size 0x%X, irq %d\n",
dep->de_name, dep->de_16bit ? 2 : 1,
dep->de_base_port, dep->de_ramsize, dep->de_irq);
}
}
/*===========================================================================*
* test_8 *
*===========================================================================*/
static int test_8(dep, pos, pat)
dpeth_t *dep;
int pos;
u8_t *pat;
{
u8_t buf[4];
int i;
int r;
outb_reg0(dep, DP_ISR, 0xFF);
/* Setup a transfer to put the pattern. */
outb_reg0(dep, DP_RBCR0, 4);
outb_reg0(dep, DP_RBCR1, 0);
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
outb_reg0(dep, DP_RSAR1, pos >> 8);
outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);
for (i= 0; i<4; i++)
outb_ne(dep, NE_DATA, pat[i]);
for (i= 0; i<N; i++)
{
if (inb_reg0(dep, DP_ISR) & ISR_RDC)
break;
}
if (i == N)
{
if (debug)
{
printf("%s: NE1000 remote DMA test failed\n",
dep->de_name);
}
return 0;
}
outb_reg0(dep, DP_RBCR0, 4);
outb_reg0(dep, DP_RBCR1, 0);
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
outb_reg0(dep, DP_RSAR1, pos >> 8);
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
for (i= 0; i<4; i++)
buf[i]= inb_ne(dep, NE_DATA);
r= (memcmp(buf, pat, 4) == 0);
return r;
}
/*===========================================================================*
* test_16 *
*===========================================================================*/
static int test_16(dep, pos, pat)
dpeth_t *dep;
int pos;
u8_t *pat;
{
u8_t buf[4];
int i;
int r;
outb_reg0(dep, DP_ISR, 0xFF);
/* Setup a transfer to put the pattern. */
outb_reg0(dep, DP_RBCR0, 4);
outb_reg0(dep, DP_RBCR1, 0);
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
outb_reg0(dep, DP_RSAR1, pos >> 8);
outb_reg0(dep, DP_CR, CR_DM_RW | CR_PS_P0 | CR_STA);
for (i= 0; i<4; i += 2)
{
outw_ne(dep, NE_DATA, *(u16_t *)(pat+i));
}
for (i= 0; i<N; i++)
{
if (inb_reg0(dep, DP_ISR) & ISR_RDC)
break;
}
if (i == N)
{
if (debug)
{
printf("%s: NE2000 remote DMA test failed\n",
dep->de_name);
}
return 0;
}
outb_reg0(dep, DP_RBCR0, 4);
outb_reg0(dep, DP_RBCR1, 0);
outb_reg0(dep, DP_RSAR0, pos & 0xFF);
outb_reg0(dep, DP_RSAR1, pos >> 8);
outb_reg0(dep, DP_CR, CR_DM_RR | CR_PS_P0 | CR_STA);
for (i= 0; i<4; i += 2)
{
*(u16_t *)(buf+i)= inw_ne(dep, NE_DATA);
}
r= (memcmp(buf, pat, 4) == 0);
return r;
}
/*===========================================================================*
* ne_stop *
*===========================================================================*/
static void ne_stop(dep)
dpeth_t *dep;
{
int byte;
/* Reset the ethernet card */
byte= inb_ne(dep, NE_RESET);
milli_delay(2);
outb_ne(dep, NE_RESET, byte);
}
static void milli_delay(unsigned long millis)
{
tickdelay(MILLIS_TO_TICKS(millis));
}
#endif /* ENABLE_NE2000 */
/*
* $PchId: ne2000.c,v 1.10 2004/08/03 12:03:00 philip Exp $
*/
Reference in a new issue View git blame Copy permalink