907 lines
25 KiB
C
907 lines
25 KiB
C
/*
|
|
* dec21041.c
|
|
*
|
|
* This file contains an ethernet device driver for DEC 21140A
|
|
* fast ethernet controllers as emulated by VirtualPC 2007. It is not
|
|
* intended to support the real card, as much more error checking
|
|
* and testing would be needed. It supports both bridged and NAT mode.
|
|
*
|
|
* Created: Mar 2008 by Nicolas Tittley <first.last@ google's mail>
|
|
*/
|
|
|
|
#include <minix/drivers.h>
|
|
#include <minix/netdriver.h>
|
|
|
|
#include <assert.h>
|
|
#include <machine/pci.h>
|
|
#include <minix/syslib.h>
|
|
#include <minix/endpoint.h>
|
|
#include <minix/com.h>
|
|
#include <minix/sef.h>
|
|
#include <minix/ds.h>
|
|
#include <net/gen/ether.h>
|
|
#include <net/gen/eth_io.h>
|
|
#include <stdlib.h>
|
|
|
|
#include "dec21140A.h"
|
|
|
|
|
|
_PROTOTYPE( PRIVATE u32_t io_inl, (u16_t); );
|
|
_PROTOTYPE( PRIVATE void io_outl, (u16_t, u32_t); );
|
|
_PROTOTYPE( PRIVATE void do_conf, (const message *); );
|
|
_PROTOTYPE( PRIVATE void do_get_stat_s, (message *); );
|
|
_PROTOTYPE( PRIVATE void do_interrupt, (const dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void do_reply, (dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void do_vread_s, (const message *, int); );
|
|
_PROTOTYPE( PRIVATE void do_watchdog, (void *); );
|
|
|
|
_PROTOTYPE( PRIVATE void de_update_conf, (dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE int de_probe, (dpeth_t *, int skip); );
|
|
_PROTOTYPE( PRIVATE void de_conf_addr, (dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void de_first_init, (dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void de_reset, (const dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void de_hw_conf, (const dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void de_start, (const dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE void de_setup_frame, (const dpeth_t *); );
|
|
_PROTOTYPE( PRIVATE u16_t de_read_rom, (const dpeth_t *, u8_t, u8_t); );
|
|
_PROTOTYPE( PRIVATE int de_calc_iov_size, (iovec_dat_s_t *); );
|
|
_PROTOTYPE( PRIVATE void de_next_iov, (iovec_dat_s_t *); );
|
|
_PROTOTYPE( PRIVATE void do_vwrite_s, (const message *, int); );
|
|
_PROTOTYPE( PRIVATE void de_get_userdata_s, (int, cp_grant_id_t,
|
|
vir_bytes, int, void *); );
|
|
|
|
/* Error messages */
|
|
static char str_CopyErrMsg[] = "unable to read/write user data";
|
|
static char str_SendErrMsg[] = "send failed";
|
|
static char str_SizeErrMsg[] = "illegal packet size";
|
|
static char str_UmapErrMsg[] = "Unable to sys_umap";
|
|
static char str_BusyErrMsg[] = "Send/Recv failed: busy";
|
|
static char str_StatErrMsg[] = "Unable to send stats";
|
|
static char str_AlignErrMsg[] = "Bad align of buffer/descriptor";
|
|
static char str_DevName[] = "dec21140A:eth#?";
|
|
|
|
PRIVATE dpeth_t de_state;
|
|
PRIVATE int de_instance;
|
|
|
|
/* SEF functions and variables. */
|
|
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
|
|
FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) );
|
|
|
|
/*===========================================================================*
|
|
* main *
|
|
*===========================================================================*/
|
|
int main(int argc, char *argv[])
|
|
{
|
|
dpeth_t *dep;
|
|
message m;
|
|
int ipc_status;
|
|
int r;
|
|
|
|
/* SEF local startup. */
|
|
env_setargs(argc, argv);
|
|
sef_local_startup();
|
|
|
|
while (TRUE)
|
|
{
|
|
if ((r= netdriver_receive(ANY, &m, &ipc_status)) != OK)
|
|
panic("netdriver_receive failed: %d", r);
|
|
|
|
if(is_ipc_notify(ipc_status)) {
|
|
switch(_ENDPOINT_P(m.m_source)) {
|
|
case CLOCK:
|
|
do_watchdog(&m);
|
|
break;
|
|
|
|
case HARDWARE:
|
|
dep = &de_state;
|
|
if (dep->de_mode == DEM_ENABLED) {
|
|
do_interrupt(dep);
|
|
if (dep->de_flags & (DEF_ACK_SEND | DEF_ACK_RECV))
|
|
do_reply(dep);
|
|
sys_irqenable(&dep->de_hook);
|
|
}
|
|
break;
|
|
default:
|
|
printf("ignoring notify from %d\n", m.m_source);
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
switch (m.m_type)
|
|
{
|
|
case DL_WRITEV_S: do_vwrite_s(&m, FALSE); break;
|
|
case DL_READV_S: do_vread_s(&m, FALSE); break;
|
|
case DL_CONF: do_conf(&m); break;
|
|
case DL_GETSTAT_S: do_get_stat_s(&m); break;
|
|
|
|
default:
|
|
printf("message 0x%lx; %d from %d\n",
|
|
m.m_type, m.m_type-DL_RQ_BASE, m.m_source);
|
|
panic("illegal message: %d", m.m_type);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* sef_local_startup *
|
|
*===========================================================================*/
|
|
PRIVATE void sef_local_startup()
|
|
{
|
|
/* Register init callbacks. */
|
|
sef_setcb_init_fresh(sef_cb_init_fresh);
|
|
sef_setcb_init_lu(sef_cb_init_fresh);
|
|
sef_setcb_init_restart(sef_cb_init_fresh);
|
|
|
|
/* Register live update callbacks. */
|
|
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
|
|
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_workfree);
|
|
|
|
/* Register signal callbacks. */
|
|
sef_setcb_signal_handler(sef_cb_signal_handler_term);
|
|
|
|
/* Let SEF perform startup. */
|
|
sef_startup();
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* sef_cb_init_fresh *
|
|
*===========================================================================*/
|
|
PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *UNUSED(info))
|
|
{
|
|
/* Initialize the DEC 21140A driver. */
|
|
int fkeys, sfkeys;
|
|
long v;
|
|
|
|
v = 0;
|
|
(void) env_parse("instance", "d", 0, &v, 0, 255);
|
|
de_instance = (int) v;
|
|
|
|
/* Request function key for debug dumps */
|
|
fkeys = sfkeys = 0;
|
|
bit_set(sfkeys, DE_FKEY);
|
|
if ((fkey_map(&fkeys, &sfkeys)) != OK)
|
|
printf("%s: error using Shift+F%d key(%d)\n", str_DevName, DE_FKEY, errno);
|
|
|
|
/* Announce we are up! */
|
|
netdriver_announce();
|
|
|
|
return OK;
|
|
}
|
|
|
|
PRIVATE void do_get_stat_s(message * mp)
|
|
{
|
|
int rc;
|
|
dpeth_t *dep;
|
|
|
|
dep = &de_state;
|
|
|
|
if ((rc = sys_safecopyto(mp->DL_ENDPT, mp->DL_GRANT, 0UL,
|
|
(vir_bytes)&dep->de_stat,
|
|
sizeof(dep->de_stat), 0)) != OK)
|
|
panic(str_CopyErrMsg, rc);
|
|
|
|
mp->m_type = DL_STAT_REPLY;
|
|
rc = send(mp->m_source, mp);
|
|
if( rc != OK )
|
|
panic(str_StatErrMsg, rc);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void do_conf(const message * mp)
|
|
{
|
|
int r;
|
|
dpeth_t *dep;
|
|
message reply_mess;
|
|
|
|
dep = &de_state;
|
|
|
|
strncpy(dep->de_name, str_DevName, strlen(str_DevName));
|
|
dep->de_name[strlen(dep->de_name)-1] = '0' + de_instance;
|
|
|
|
if (dep->de_mode == DEM_DISABLED) {
|
|
de_update_conf(dep);
|
|
pci_init();
|
|
if (dep->de_mode == DEM_ENABLED && !de_probe(dep, de_instance)) {
|
|
printf("%s: warning no ethernet card found at 0x%04X\n",
|
|
dep->de_name, dep->de_base_port);
|
|
dep->de_mode = DEM_DISABLED;
|
|
}
|
|
}
|
|
|
|
r = OK;
|
|
|
|
/* 'de_mode' may change if probe routines fail, test again */
|
|
switch (dep->de_mode) {
|
|
|
|
case DEM_DISABLED:
|
|
r = ENXIO; /* Device is OFF or hardware probe failed */
|
|
break;
|
|
|
|
case DEM_ENABLED:
|
|
if (dep->de_flags == DEF_EMPTY) {
|
|
de_first_init(dep);
|
|
dep->de_flags |= DEF_ENABLED;
|
|
de_reset(dep);
|
|
de_hw_conf(dep);
|
|
de_setup_frame(dep);
|
|
de_start(dep);
|
|
}
|
|
|
|
/* TODO CHECK PROMISC AND MULTI */
|
|
dep->de_flags &= NOT(DEF_PROMISC | DEF_MULTI | DEF_BROAD);
|
|
if (mp->DL_MODE & DL_PROMISC_REQ)
|
|
dep->de_flags |= DEF_PROMISC | DEF_MULTI | DEF_BROAD;
|
|
if (mp->DL_MODE & DL_MULTI_REQ) dep->de_flags |= DEF_MULTI;
|
|
if (mp->DL_MODE & DL_BROAD_REQ) dep->de_flags |= DEF_BROAD;
|
|
break;
|
|
|
|
case DEM_SINK:
|
|
DEBUG(printf("%s running in sink mode\n", str_DevName));
|
|
memset(dep->de_address.ea_addr, 0, sizeof(ether_addr_t));
|
|
de_conf_addr(dep);
|
|
break;
|
|
|
|
default: break;
|
|
}
|
|
|
|
reply_mess.m_type = DL_CONF_REPLY;
|
|
reply_mess.DL_STAT = r;
|
|
if(r == OK){
|
|
*(ether_addr_t *) reply_mess.DL_HWADDR = dep->de_address;
|
|
}
|
|
|
|
if (send(mp->m_source, &reply_mess) != OK)
|
|
panic(str_SendErrMsg, mp->m_source);
|
|
|
|
return;
|
|
}
|
|
|
|
PRIVATE void do_reply(dpeth_t * dep)
|
|
{
|
|
message reply;
|
|
int r, flags = DL_NOFLAGS;
|
|
|
|
if (dep->de_flags & DEF_ACK_SEND) flags |= DL_PACK_SEND;
|
|
if (dep->de_flags & DEF_ACK_RECV) flags |= DL_PACK_RECV;
|
|
|
|
reply.m_type = DL_TASK_REPLY;
|
|
reply.DL_FLAGS = flags;
|
|
reply.DL_COUNT = dep->de_read_s;
|
|
|
|
r = send(dep->de_client, &reply);
|
|
|
|
if(r < 0)
|
|
panic(str_SendErrMsg, r);
|
|
|
|
dep->de_read_s = 0;
|
|
dep->de_flags &= NOT(DEF_ACK_SEND | DEF_ACK_RECV);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void do_watchdog(void *UNUSED(message))
|
|
{
|
|
/* nothing here yet */
|
|
return;
|
|
}
|
|
|
|
PRIVATE int de_probe(dpeth_t *dep, int skip){
|
|
int i, r, devind;
|
|
u16_t vid, did, temp16;
|
|
|
|
DEBUG(printf("PROBING..."));
|
|
|
|
r= pci_first_dev(&devind, &vid, &did);
|
|
if (r == 0)
|
|
return FALSE;
|
|
|
|
for(;;)
|
|
{
|
|
if ( DEC21140A_VID == vid &&
|
|
DEC21140A_DID == did)
|
|
{
|
|
if (!skip)
|
|
break;
|
|
skip--;
|
|
}
|
|
|
|
r= pci_next_dev(&devind, &vid, &did);
|
|
if (!r)
|
|
return FALSE;
|
|
}
|
|
|
|
pci_reserve(devind);
|
|
|
|
dep->de_base_port = pci_attr_r32(devind, PCI_BAR) & 0xffffffe0;
|
|
dep->de_irq = pci_attr_r8(devind, PCI_ILR);
|
|
|
|
if (dep->de_base_port < DE_MIN_BASE_ADDR)
|
|
panic("de_probe: base address invalid: %d", dep->de_base_port);
|
|
|
|
DEBUG(printf("%s: using I/O address 0x%lx, IRQ %d\n",
|
|
dep->de_name, (unsigned long)dep->de_base_port,
|
|
dep->de_irq));
|
|
|
|
dep->de_type = pci_attr_r8(devind, PCI_REV);
|
|
|
|
/* device validation. We support only the DEC21140A */
|
|
if(dep->de_type != DEC_21140A){
|
|
dep->de_type = DE_TYPE_UNKNOWN;
|
|
printf("%s: unsupported device\n", str_DevName);
|
|
return FALSE;
|
|
}
|
|
|
|
de_reset(dep);
|
|
|
|
DEBUG(printf("Reading SROM...\n"));
|
|
|
|
for(i=0;i<(1<<SROM_BITWIDTH)-1;i++){
|
|
temp16 = de_read_rom(dep, i, SROM_BITWIDTH);
|
|
dep->srom[i*2] = temp16 & 0xFF;
|
|
dep->srom[i*2+1] = temp16 >> 8;
|
|
}
|
|
|
|
/* TODO: validate SROM content */
|
|
/* acquire MAC addr */
|
|
DEBUG(printf("Using MAC addr= "));
|
|
for(i=0;i<6;i++){
|
|
dep->de_address.ea_addr[i] = dep->srom[i+DE_SROM_EA_OFFSET];
|
|
DEBUG(printf("%02X%c",dep->de_address.ea_addr[i],i!=5?'-':'\n'));
|
|
}
|
|
DEBUG(printf("probe success\n"));
|
|
return TRUE;
|
|
}
|
|
|
|
PRIVATE u16_t de_read_rom(const dpeth_t *dep, u8_t addr, u8_t nbAddrBits){
|
|
u16_t retVal = 0;
|
|
int i;
|
|
u32_t csr = 0;
|
|
u32_t csr2 = 0; /* csr2 is used to hold constant values that are
|
|
setup in the init phase, it makes this a little
|
|
more readable, the following macro is also just
|
|
to clear up the code a little.*/
|
|
|
|
#define EMIT do { io_outl(CSR_ADDR(dep, CSR9), csr | csr2); io_outl(CSR_ADDR(dep, CSR1), 0);} while(0)
|
|
|
|
/* init */
|
|
csr = 0; EMIT;
|
|
csr = CSR9_SR; EMIT;
|
|
csr = CSR9_SR | CSR9_RD; EMIT;
|
|
|
|
csr2 = CSR9_SR | CSR9_RD;
|
|
csr = 0; EMIT;
|
|
csr2 |= CSR9_CS;
|
|
|
|
csr = 0; EMIT;
|
|
csr = CSR9_SRC; EMIT;
|
|
csr = 0; EMIT;
|
|
|
|
/* cmd 110 - Read */
|
|
csr = CSR9_DI; EMIT;
|
|
csr = CSR9_DI | CSR9_SRC; EMIT;
|
|
csr = CSR9_DI; EMIT;
|
|
csr = CSR9_DI | CSR9_SRC; EMIT;
|
|
csr = CSR9_DI; EMIT;
|
|
csr = 0; EMIT;
|
|
csr = CSR9_SRC; EMIT;
|
|
csr = 0; EMIT;
|
|
|
|
/* addr to read */
|
|
for(i=nbAddrBits;i!=0;i--){
|
|
csr = (addr&(1<<(i-1))) != 0 ? CSR9_DI : 0; EMIT;
|
|
csr ^= CSR9_SRC; EMIT;
|
|
csr ^= CSR9_SRC; EMIT;
|
|
}
|
|
|
|
/* actual read */
|
|
retVal=0;
|
|
for(i=0;i<16;i++){
|
|
retVal <<= 1;
|
|
csr = CSR9_SRC; EMIT;
|
|
retVal |= (io_inl(CSR_ADDR(dep, CSR9)) & CSR9_DO) == 0 ? 0 : 1;
|
|
csr = 0; EMIT;
|
|
}
|
|
|
|
/* clean up */
|
|
csr = 0; EMIT;
|
|
|
|
#undef EMIT
|
|
return retVal;
|
|
}
|
|
|
|
static void de_update_conf(dpeth_t * dep)
|
|
{
|
|
static char dpc_fmt[] = "x:d:x";
|
|
char ec_key[16];
|
|
long val;
|
|
|
|
strcpy(ec_key, "DEETH0");
|
|
ec_key[5] += de_instance;
|
|
|
|
dep->de_mode = DEM_ENABLED;
|
|
switch (env_parse(ec_key, dpc_fmt, 0, &val, 0x000L, 0x3FFL)) {
|
|
case EP_OFF: dep->de_mode = DEM_DISABLED; break;
|
|
case EP_ON: dep->de_mode = DEM_SINK; break;
|
|
}
|
|
dep->de_base_port = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
PRIVATE void do_vread_s(const message * mp, int from_int)
|
|
{
|
|
char *buffer;
|
|
u32_t size;
|
|
int r, ix = 0;
|
|
vir_bytes bytes;
|
|
dpeth_t *dep = NULL;
|
|
de_loc_descr_t *descr = NULL;
|
|
iovec_dat_s_t *iovp = NULL;
|
|
|
|
dep = &de_state;
|
|
|
|
dep->de_client = mp->m_source;
|
|
|
|
if (dep->de_mode == DEM_ENABLED) {
|
|
|
|
descr = &dep->descr[DESCR_RECV][dep->cur_descr[DESCR_RECV]];
|
|
|
|
/* check if packet is in the current descr and only there */
|
|
if( !( !(descr->descr->des[DES0] & DES0_OWN) &&
|
|
(descr->descr->des[DES0] & DES0_FS) &&
|
|
(descr->descr->des[DES0] & DES0_LS) ))
|
|
goto suspend;
|
|
|
|
|
|
/*TODO: multi-descr msgs...*/
|
|
/* We only support packets contained in a single descriptor.
|
|
Setting the descriptor buffer size to less then
|
|
ETH_MAX_PACK_SIZE will result in multi-descriptor
|
|
packets that we won't be able to handle
|
|
*/
|
|
assert(!(descr->descr->des[DES0]&DES0_OWN));
|
|
assert(descr->descr->des[DES0]&DES0_FS);
|
|
assert(descr->descr->des[DES0]&DES0_LS);
|
|
|
|
/* Check for abnormal messages. We assert here
|
|
because this driver is for a virtualized
|
|
envrionment where we will not get bad packets
|
|
*/
|
|
assert(!(descr->descr->des[DES0]&DES0_ES));
|
|
assert(!(descr->descr->des[DES0]&DES0_RE));
|
|
|
|
|
|
/* Setup the iovec entry to allow copying into
|
|
client layer
|
|
*/
|
|
dep->de_read_iovec.iod_proc_nr = mp->DL_ENDPT;
|
|
de_get_userdata_s(mp->DL_ENDPT, (cp_grant_id_t) mp->DL_GRANT, 0,
|
|
mp->DL_COUNT, dep->de_read_iovec.iod_iovec);
|
|
dep->de_read_iovec.iod_iovec_s = mp->DL_COUNT;
|
|
dep->de_read_iovec.iod_grant = (cp_grant_id_t) mp->DL_GRANT;
|
|
dep->de_read_iovec.iod_iovec_offset = 0;
|
|
size = de_calc_iov_size(&dep->de_read_iovec);
|
|
if (size < ETH_MAX_PACK_SIZE)
|
|
panic(str_SizeErrMsg, size);
|
|
|
|
/* Copy buffer to user area and clear ownage */
|
|
size = (descr->descr->des[DES0]&DES0_FL)>>DES0_FL_SHIFT;
|
|
|
|
/*TODO: Complain to MS */
|
|
/*HACK: VPC2007 returns packet of invalid size. Ethernet standard
|
|
specify 46 bytes as the minimum for valid payload. However, this is
|
|
artificial in so far as for certain packet types, notably ARP, less
|
|
then 46 bytes are needed to contain the full information. In a non
|
|
virtualized environment the 46 bytes rule is enforced in order to give
|
|
guarantee in the collison detection scheme. Of course, this being a
|
|
driver for a VPC2007, we won't have collisions and I can only suppose
|
|
MS decided to cut packet size to true minimum, regardless of the
|
|
46 bytes payload standard. Note that this seems to not happen in
|
|
bridged mode. Note also, that the card does not return runt or
|
|
incomplete frames to us, so this hack is safe
|
|
*/
|
|
if(size<60){
|
|
bzero(&descr->buf1[size], 60-size);
|
|
size=60;
|
|
}
|
|
/* End ugly hack */
|
|
|
|
iovp = &dep->de_read_iovec;
|
|
buffer = descr->buf1;
|
|
dep->bytes_rx += size;
|
|
dep->de_stat.ets_packetR++;
|
|
dep->de_read_s = size;
|
|
|
|
do {
|
|
bytes = iovp->iod_iovec[ix].iov_size; /* Size of buffer */
|
|
if (bytes >= size)
|
|
bytes = size;
|
|
|
|
r= sys_safecopyto(iovp->iod_proc_nr, iovp->iod_iovec[ix].iov_grant, 0,
|
|
(vir_bytes)buffer, bytes, D);
|
|
if (r != OK)
|
|
panic(str_CopyErrMsg, r);
|
|
buffer += bytes;
|
|
|
|
if (++ix >= IOVEC_NR) { /* Next buffer of IO vector */
|
|
de_next_iov(iovp);
|
|
ix = 0;
|
|
}
|
|
} while ((size -= bytes) > 0);
|
|
|
|
descr->descr->des[DES0]=DES0_OWN;
|
|
dep->cur_descr[DESCR_RECV]++;
|
|
if(dep->cur_descr[DESCR_RECV] >= DE_NB_RECV_DESCR)
|
|
dep->cur_descr[DESCR_RECV] = 0;
|
|
|
|
DEBUG(printf("Read returned size = %d\n", size));
|
|
|
|
/* Reply information */
|
|
dep->de_flags |= DEF_ACK_RECV;
|
|
dep->de_flags &= NOT(DEF_READING);
|
|
}
|
|
|
|
if(!from_int){
|
|
do_reply(dep);
|
|
}
|
|
return;
|
|
|
|
suspend:
|
|
if(from_int){
|
|
assert(dep->de_flags & DEF_READING);
|
|
return;
|
|
}
|
|
|
|
assert(!(dep->de_flags & DEF_READING));
|
|
dep->rx_return_msg = *mp;
|
|
dep->de_flags |= DEF_READING;
|
|
do_reply(dep);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void de_conf_addr(dpeth_t * dep)
|
|
{
|
|
static char ea_fmt[] = "x:x:x:x:x:x";
|
|
char ea_key[16];
|
|
int ix;
|
|
long val;
|
|
|
|
strcpy(ea_key, "DEETH0_EA");
|
|
ea_key[5] += de_instance;
|
|
|
|
for (ix = 0; ix < SA_ADDR_LEN; ix++) {
|
|
val = dep->de_address.ea_addr[ix];
|
|
if (env_parse(ea_key, ea_fmt, ix, &val, 0x00L, 0xFFL) != EP_SET)
|
|
break;
|
|
dep->de_address.ea_addr[ix] = val;
|
|
}
|
|
|
|
if (ix != 0 && ix != SA_ADDR_LEN)
|
|
env_parse(ea_key, "?", 0, &val, 0L, 0L);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void de_first_init(dpeth_t *dep)
|
|
{
|
|
int i,j,r;
|
|
vir_bytes descr_vir = dep->sendrecv_descr_buf;
|
|
vir_bytes buffer_vir = dep->sendrecv_buf;
|
|
de_loc_descr_t *loc_descr;
|
|
u32_t temp;
|
|
|
|
|
|
for(i=0;i<2;i++){
|
|
loc_descr = &dep->descr[i][0];
|
|
for(j=0; j < (i==DESCR_RECV ? DE_NB_RECV_DESCR : DE_NB_SEND_DESCR); j++){
|
|
|
|
/* assign buffer space for descriptor */
|
|
loc_descr->descr = descr_vir;
|
|
descr_vir += sizeof(de_descr_t);
|
|
|
|
/* assign space for buffer */
|
|
loc_descr->buf1 = buffer_vir;
|
|
buffer_vir += (i==DESCR_RECV ? DE_RECV_BUF_SIZE : DE_SEND_BUF_SIZE);
|
|
loc_descr->buf2 = 0;
|
|
loc_descr++;
|
|
}
|
|
}
|
|
|
|
/* Now that we have buffer space and descriptors, we need to
|
|
obtain their physical address to pass to the hardware
|
|
*/
|
|
for(i=0;i<2;i++){
|
|
loc_descr = &dep->descr[i][0];
|
|
temp = (i==DESCR_RECV ? DE_RECV_BUF_SIZE : DE_SEND_BUF_SIZE);
|
|
for(j=0; j < (i==DESCR_RECV ? DE_NB_RECV_DESCR : DE_NB_SEND_DESCR); j++){
|
|
/* translate buffers physical address */
|
|
r = sys_umap(SELF, VM_D, loc_descr->buf1, temp,
|
|
&(loc_descr->descr->des[DES_BUF1]));
|
|
if(r != OK) panic("umap failed: %d", r);
|
|
loc_descr->descr->des[DES_BUF2] = 0;
|
|
memset(&loc_descr->descr->des[DES0],0,sizeof(u32_t));
|
|
loc_descr->descr->des[DES1] = temp;
|
|
if(j==( (i==DESCR_RECV?DE_NB_RECV_DESCR:DE_NB_SEND_DESCR)-1))
|
|
loc_descr->descr->des[DES1] |= DES1_ER;
|
|
if(i==DESCR_RECV)
|
|
loc_descr->descr->des[DES0] |= DES0_OWN;
|
|
loc_descr++;
|
|
}
|
|
}
|
|
|
|
/* record physical location of two first descriptor */
|
|
r = sys_umap(SELF, VM_D, dep->descr[DESCR_RECV][0].descr,
|
|
sizeof(de_descr_t), &dep->sendrecv_descr_phys_addr[DESCR_RECV]);
|
|
if(r != OK) panic(str_UmapErrMsg, r);
|
|
|
|
r = sys_umap(SELF, VM_D, dep->descr[DESCR_TRAN][0].descr,
|
|
sizeof(de_descr_t), &dep->sendrecv_descr_phys_addr[DESCR_TRAN]);
|
|
if(r != OK) panic(str_UmapErrMsg, r);
|
|
|
|
DEBUG(printf("Descr: head tran=[%08X] head recv=[%08X]\n",
|
|
dep->sendrecv_descr_phys_addr[DESCR_TRAN],
|
|
dep->sendrecv_descr_phys_addr[DESCR_RECV]));
|
|
|
|
/* check alignment just to be extra safe */
|
|
for(i=0;i<2;i++){
|
|
loc_descr = &dep->descr[i][0];
|
|
for(j=0;j< (i==DESCR_RECV?DE_NB_RECV_DESCR:DE_NB_SEND_DESCR);j++){
|
|
r = sys_umap(SELF, VM_D, &(loc_descr->descr), sizeof(de_descr_t),
|
|
&temp);
|
|
if(r != OK)
|
|
panic(str_UmapErrMsg, r);
|
|
|
|
if( ((loc_descr->descr->des[DES_BUF1] & 0x3) != 0) ||
|
|
((loc_descr->descr->des[DES_BUF2] & 0x3) != 0) ||
|
|
((temp&0x3)!=0) )
|
|
panic(str_AlignErrMsg, temp);
|
|
|
|
loc_descr++;
|
|
}
|
|
}
|
|
|
|
/* Init default values */
|
|
dep->cur_descr[DESCR_TRAN]=1;
|
|
dep->cur_descr[DESCR_RECV]=0;
|
|
dep->bytes_rx = 0;
|
|
dep->bytes_tx = 0;
|
|
|
|
/* Set the interrupt handler policy. Request interrupts not to be reenabled
|
|
* automatically. Return the IRQ line number when an interrupt occurs.
|
|
*/
|
|
dep->de_hook = dep->de_irq;
|
|
sys_irqsetpolicy(dep->de_irq, 0, &dep->de_hook);
|
|
sys_irqenable(&dep->de_hook);
|
|
}
|
|
|
|
PRIVATE void do_interrupt(const dpeth_t *dep){
|
|
u32_t val;
|
|
val = io_inl(CSR_ADDR(dep, CSR5));
|
|
|
|
if(val & CSR5_AIS){
|
|
panic("Abnormal Int CSR5=: %d", val);
|
|
}
|
|
|
|
if( (dep->de_flags & DEF_READING) && (val & CSR5_RI) ){
|
|
do_vread_s(&dep->rx_return_msg, TRUE);
|
|
}
|
|
|
|
if( (dep->de_flags & DEF_SENDING) && (val & CSR5_TI) ){
|
|
do_vwrite_s(&dep->tx_return_msg, TRUE);
|
|
}
|
|
|
|
/* ack and reset interrupts */
|
|
io_outl(CSR_ADDR(dep, CSR5), 0xFFFFFFFF);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void de_reset(const dpeth_t *dep){
|
|
io_outl(CSR_ADDR(dep, CSR0), CSR0_SWR);
|
|
}
|
|
|
|
PRIVATE void de_hw_conf(const dpeth_t *dep){
|
|
u32_t val;
|
|
|
|
/* CSR0 - global host bus prop */
|
|
val = CSR0_BAR | CSR0_CAL_8;
|
|
io_outl(CSR_ADDR(dep, CSR0), val);
|
|
|
|
/* CSR3 - Receive list BAR */
|
|
val = dep->sendrecv_descr_phys_addr[DESCR_RECV];
|
|
io_outl(CSR_ADDR(dep, CSR3), val);
|
|
|
|
/* CSR4 - Transmit list BAR */
|
|
val = dep->sendrecv_descr_phys_addr[DESCR_TRAN];
|
|
io_outl(CSR_ADDR(dep, CSR4), val);
|
|
|
|
/* CSR7 - interrupt mask */
|
|
val = CSR7_TI | CSR7_RI | CSR7_AI;
|
|
io_outl(CSR_ADDR(dep, CSR7), val);
|
|
|
|
/* CSR6 - operating mode register */
|
|
val = CSR6_MBO | CSR6_PS | CSR6_FD | CSR6_HBD |
|
|
CSR6_PCS | CSR6_SCR | CSR6_TR_00;
|
|
io_outl(CSR_ADDR(dep, CSR6), val);
|
|
}
|
|
|
|
PRIVATE void de_start(const dpeth_t *dep){
|
|
u32_t val;
|
|
val = io_inl(CSR_ADDR(dep, CSR6)) | CSR6_ST | CSR6_SR;
|
|
io_outl(CSR_ADDR(dep, CSR6), val);
|
|
}
|
|
|
|
PRIVATE void de_setup_frame(const dpeth_t *dep){
|
|
int i;
|
|
u32_t val;
|
|
|
|
/* this is not perfect... we assume pass all multicast and only
|
|
filter non-multicast frames */
|
|
dep->descr[DESCR_TRAN][0].buf1[0] = 0xFF;
|
|
dep->descr[DESCR_TRAN][0].buf1[1] = 0xFF;
|
|
dep->descr[DESCR_TRAN][0].buf1[4] = 0xFF;
|
|
dep->descr[DESCR_TRAN][0].buf1[5] = 0xFF;
|
|
dep->descr[DESCR_TRAN][0].buf1[8] = 0xFF;
|
|
dep->descr[DESCR_TRAN][0].buf1[9] = 0xFF;
|
|
for(i=1;i<16;i++){
|
|
memset(&(dep->descr[DESCR_TRAN][0].buf1[12*i]), 0, 12);
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+0] = dep->de_address.ea_addr[0];
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+1] = dep->de_address.ea_addr[1];
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+4] = dep->de_address.ea_addr[2];
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+5] = dep->de_address.ea_addr[3];
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+8] = dep->de_address.ea_addr[4];
|
|
dep->descr[DESCR_TRAN][0].buf1[12*i+9] = dep->de_address.ea_addr[5];
|
|
}
|
|
|
|
dep->descr[DESCR_TRAN][0].descr->des[DES0] = DES0_OWN;
|
|
dep->descr[DESCR_TRAN][0].descr->des[DES1] = DES1_SET |
|
|
DE_SETUP_FRAME_SIZE | DES1_IC;
|
|
|
|
/* start transmit process to process setup frame */
|
|
val = io_inl(CSR_ADDR(dep, CSR6)) | CSR6_ST;
|
|
io_outl(CSR_ADDR(dep, CSR6), val);
|
|
io_outl(CSR_ADDR(dep, CSR1), 0xFFFFFFFF);
|
|
|
|
return;
|
|
}
|
|
|
|
PRIVATE int de_calc_iov_size(iovec_dat_s_t * iovp){
|
|
int size, ix;
|
|
size = ix = 0;
|
|
|
|
do{
|
|
size += iovp->iod_iovec[ix].iov_size;
|
|
if (++ix >= IOVEC_NR) {
|
|
de_next_iov(iovp);
|
|
ix = 0;
|
|
}
|
|
} while (ix < iovp->iod_iovec_s);
|
|
return size;
|
|
}
|
|
|
|
PRIVATE void de_get_userdata_s(int user_proc, cp_grant_id_t grant,
|
|
vir_bytes offset, int count, void *loc_addr){
|
|
int rc;
|
|
vir_bytes len;
|
|
|
|
len = (count > IOVEC_NR ? IOVEC_NR : count) * sizeof(iovec_t);
|
|
rc = sys_safecopyfrom(user_proc, grant, 0, (vir_bytes)loc_addr, len, D);
|
|
if (rc != OK)
|
|
panic(str_CopyErrMsg, rc);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void de_next_iov(iovec_dat_s_t * iovp){
|
|
|
|
iovp->iod_iovec_s -= IOVEC_NR;
|
|
iovp->iod_iovec_offset += IOVEC_NR * sizeof(iovec_t);
|
|
de_get_userdata_s(iovp->iod_proc_nr, iovp->iod_grant, iovp->iod_iovec_offset,
|
|
iovp->iod_iovec_s, iovp->iod_iovec);
|
|
return;
|
|
}
|
|
|
|
PRIVATE void do_vwrite_s(const message * mp, int from_int){
|
|
static u8_t setupDone = 0;
|
|
int size, r, bytes, ix, totalsize;
|
|
dpeth_t *dep;
|
|
iovec_dat_s_t *iovp = NULL;
|
|
de_loc_descr_t *descr = NULL;
|
|
char *buffer = NULL;
|
|
|
|
dep = &de_state;
|
|
|
|
dep->de_client = mp->m_source;
|
|
|
|
if (dep->de_mode == DEM_ENABLED) {
|
|
|
|
if (!from_int && (dep->de_flags & DEF_SENDING))
|
|
panic(str_BusyErrMsg);
|
|
|
|
descr = &dep->descr[DESCR_TRAN][dep->cur_descr[DESCR_TRAN]];
|
|
|
|
if(( descr->descr->des[DES0] & DES0_OWN)!=0)
|
|
goto suspend;
|
|
|
|
if(!setupDone && (dep->cur_descr[DESCR_TRAN] == 0) ){
|
|
dep->descr[DESCR_TRAN][0].descr->des[DES0] = 0;
|
|
setupDone=1;
|
|
}
|
|
|
|
buffer = descr->buf1;
|
|
iovp = &dep->de_write_iovec;
|
|
iovp->iod_proc_nr = mp->DL_ENDPT;
|
|
de_get_userdata_s(mp->DL_ENDPT, mp->DL_GRANT, 0,
|
|
mp->DL_COUNT, iovp->iod_iovec);
|
|
iovp->iod_iovec_s = mp->DL_COUNT;
|
|
iovp->iod_grant = (cp_grant_id_t) mp->DL_GRANT;
|
|
iovp->iod_iovec_offset = 0;
|
|
totalsize = size = de_calc_iov_size(iovp);
|
|
if (size < ETH_MIN_PACK_SIZE || size > ETH_MAX_PACK_SIZE)
|
|
panic(str_SizeErrMsg, size);
|
|
|
|
dep->bytes_tx += size;
|
|
dep->de_stat.ets_packetT++;
|
|
|
|
ix=0;
|
|
do {
|
|
bytes = iovp->iod_iovec[ix].iov_size;
|
|
if (bytes >= size)
|
|
bytes = size;
|
|
|
|
r= sys_safecopyfrom(iovp->iod_proc_nr, iovp->iod_iovec[ix].iov_grant,
|
|
0, (vir_bytes)buffer, bytes, D);
|
|
if (r != OK)
|
|
panic(str_CopyErrMsg, r);
|
|
buffer += bytes;
|
|
|
|
if (++ix >= IOVEC_NR) {
|
|
de_next_iov(iovp);
|
|
ix = 0;
|
|
}
|
|
} while ((size -= bytes) > 0);
|
|
|
|
descr->descr->des[DES1] = (descr->descr->des[DES1]&DES1_ER) |
|
|
DES1_FS | DES1_LS | DES1_IC | totalsize;
|
|
descr->descr->des[DES0] = DES0_OWN;
|
|
|
|
dep->cur_descr[DESCR_TRAN]++;
|
|
if(dep->cur_descr[DESCR_TRAN] >= DE_NB_SEND_DESCR)
|
|
dep->cur_descr[DESCR_TRAN] = 0;
|
|
|
|
io_outl(CSR_ADDR(dep, CSR1), 0xFFFFFFFF);
|
|
}
|
|
|
|
dep->de_flags |= DEF_ACK_SEND;
|
|
if(from_int){
|
|
dep->de_flags &= NOT(DEF_SENDING);
|
|
return;
|
|
}
|
|
do_reply(dep);
|
|
return;
|
|
|
|
suspend:
|
|
if(from_int)
|
|
panic("should not happen: %d", 0);
|
|
|
|
dep->de_stat.ets_transDef++;
|
|
dep->de_flags |= DEF_SENDING;
|
|
dep->de_stat.ets_transDef++;
|
|
dep->tx_return_msg = *mp;
|
|
do_reply(dep);
|
|
}
|
|
|
|
PRIVATE void warning(const char *type, int err){
|
|
printf("Warning: %s sys_%s failed (%d)\n", str_DevName, type, err);
|
|
return;
|
|
}
|
|
|
|
PRIVATE u32_t io_inl(u16_t port){
|
|
u32_t value;
|
|
int rc;
|
|
if ((rc = sys_inl(port, &value)) != OK) warning("inl", rc);
|
|
return value;
|
|
}
|
|
|
|
PRIVATE void io_outl(u16_t port, u32_t value){
|
|
int rc;
|
|
if ((rc = sys_outl(port, value)) != OK) warning("outl", rc);
|
|
return;
|
|
}
|