minix/commands/scripts/setup.sh
2005-09-01 16:39:03 +00:00

456 lines
13 KiB
Bash
Executable file

#!/bin/sh
#
# setup 4.1 - install a MINIX distribution
#
# Changes:
# Aug 2005 robustness checks and beautifications (Jorrit N. Herder)
# Jul 2005 extended with autopart and networking (Ben J. Gras)
# Dec 20, 1994 created (Kees J. Bot)
#
LOCALRC=/usr/etc/rc.local
MYLOCALRC=/mnt/etc/rc.local
PATH=/bin:/usr/bin
export PATH
usage()
{
cat >&2 <<'EOF'
Usage: setup # Install a skeleton system on the hard disk.
setup /usr # Install the rest of the system (binaries or sources).
# To install from other things then floppies:
urlget http://... | setup /usr # Read from a web site.
urlget ftp://... | setup /usr # Read from an FTP site.
mtools copy c0d0p0:... - | setup /usr # Read from the C: drive.
dosread c0d0p0 ... | setup /usr # Likewise if no mtools.
EOF
exit 1
}
warn()
{
echo -e "\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b ! $1"
}
# No options.
while getopts '' opt; do usage; done
shift `expr $OPTIND - 1`
if [ "$USER" != root ]
then echo "Please run setup as root."
exit 1
fi
# Find out what we are running from.
exec 9<&0 </etc/mtab # Mounted file table.
read thisroot rest # Current root (/dev/ram or /dev/fd?)
read fdusr rest # USR (/dev/fd? or /dev/fd?p2)
exec 0<&9 9<&-
# What do we know about ROOT?
case $thisroot:$fdusr in
/dev/ram:/dev/fd0p2) fdroot=/dev/fd0 # Combined ROOT+USR in drive 0
;;
/dev/ram:/dev/fd1p2) fdroot=/dev/fd1 # Combined ROOT+USR in drive 1
;;
/dev/ram:/dev/fd*) fdroot=unknown # ROOT is some other floppy
;;
/dev/fd*:/dev/fd*) fdroot=$thisroot # ROOT is mounted directly
;;
*) fdroot=$thisroot # ?
esac
echo -n "
Welcome to the MINIX setup script. This script will guide you in setting up
MINIX on your machine. Please consult the manual for detailed instructions.
Note 1: If the screen blanks, hit CTRL+F3 to select \"software scrolling\".
Note 2: If things go wrong then hit CTRL+C to abort and start over.
Note 3: Default answers, like [y], can simply be chosen by hitting ENTER.
Note 4: If you see a colon (:) then you should hit ENTER to continue.
:"
read ret
# begin Step 1
echo ""
echo " --- Step 1: Select keyboard type --------------------------------------"
echo ""
echo "What type of keyboard do you have? You can choose one of:"
echo ""
ls -C /usr/lib/keymaps | sed -e 's/\.map//g' -e 's/^/ /'
echo ""
step1=""
while [ "$step1" != ok ]
do
echo -n "Keyboard type? [us-std] "; read keymap
test -n "$keymap" || keymap=us-std
if loadkeys "/usr/lib/keymaps/$keymap.map" 2>/dev/null
then step1=ok
else warn "invalid keyboard"
fi
done
# end Step 1
# begin Step 2
step2=""
while [ "$step2" != ok ]
do
echo ""
echo " --- Step 2: Create a partition for MINIX 3, Or Reinstall ------------"
echo ""
echo "Now you need to create a MINIX 3 partition on your hard disk."
echo "You can also select one that's already there."
echo " "
echo "If you have an existing installation, 'reinstall'ing will let you"
echo "keep your current partitioning and subpartitioning, and overwrite"
echo "everything except your s3 subpartition (/home)."
echo " "
echo "Unless you are an expert, you are advised to use the automated"
echo "step-by-step help in setting up."
echo ""
ok=""
while [ "$ok" = "" ]
do
echo "Press ENTER for automatic mode, or type 'expert', or"
echo -n "type 'reinstall': "
read mode
if [ -z "$mode" ]; then auto="1"; ok="yes"; fi
if [ "$mode" = expert ]; then auto=""; ok="yes"; fi
if [ "$mode" = reinstall ]; then auto="r"; ok="yes"; fi
if [ "$ok" != yes ]; then warn "try again"; fi
done
primary=
if [ -z "$auto" ]
then
# Expert mode
echo -n "
MINIX needs one primary partition of about 250 MB for a full install.
The maximum fill system currently supported is 4 GB.
If there is no free space on your disk then you have to choose an option:
(1) Delete one or more partitions
(2) Allocate an existing partition to MINIX 3
(3) Exit setup and shrink a partition using a different OS
To make this partition you will be put in the editor \"part\". Follow the
advice under the '!' key to make a new partition of type MINIX. Do not
touch an existing partition unless you know precisely what you are doing!
Please note the name of the partition (e.g. c0d0p1, c0d1p3, c1d1p0) you
make. (See the devices section in usage(8) on MINIX device names.)
:"
read ret
while [ -z "$primary" ]
do
part || exit
echo -n "
Please finish the name of the primary partition you have created:
(Just type ENTER if you want to rerun \"part\") /dev/"
read primary
done
echo ""
echo "This is the point of no return. You have selected to install MINIX"
echo "on partition /dev/$primary. Please confirm that you want to use this"
echo "selection to install MINIX."
echo ""
confirmation=""
while [ -z "$confirmation" -o "$confirmation" != yes -a "$confirmation" != no ]
do
echo -n "Are you sure you want to continue? Please enter 'yes' or 'no': "
read confirmation
if [ "$confirmation" = yes ]; then step2=ok; fi
done
biosdrivename="Actual BIOS device name unknown, due to expert mode."
else
if [ "$auto" = "1" ]
then
# Automatic mode
PF="/tmp/pf"
if autopart -f$PF
then if [ -s "$PF" ]
then
set `cat $PF`
bd="$1"
bdn="$2"
biosdrivename="Probably, the right command is \"boot $bdn\"."
if [ -b "/dev/$bd" ]
then primary="$bd"
else echo "Funny device $bd from autopart."
fi
else
echo "Didn't find output from autopart."
fi
else echo "Autopart tool failed. Trying again."
fi
# Reset at retries and timeouts in case autopart left
# them messy.
atnormalize
if [ -n "$primary" ]; then step2=ok; fi
else
# Reinstall mode
primary=""
while [ -z "$primary" ]
do
echo -n "
Please finish the name of the primary partition you have a MINIX install on:
/dev/"
read primary
done
echo ""
echo "This is the point of no return. You have selected to reinstall MINIX"
echo "on partition /dev/$primary. Please confirm that you want to use this"
echo "selection to reinstall MINIX. This will wipe out your s0 (root) and"
echo "s2 (/usr) filesystems."
echo ""
confirmation=""
while [ -z "$confirmation" -o "$confirmation" != yes -a "$confirmation" != no ]
do
echo -n "Are you sure you want to continue? Please enter 'yes' or 'no': "
read confirmation
if [ "$confirmation" = yes ]; then step2=ok; fi
done
biosdrivename="Actual BIOS device name unknown, due to reinstallation."
fi
fi
done # while step2 != ok
# end Step 2
if [ ! "$auto" = "r" ]
then
# begin Step 3
echo ""
echo " --- Step 3: Select your Ethernet chip ---------------------------------"
echo ""
# Ask user about networking
echo "MINIX 3 currently supports the following Ethernet cards. Please choose: "
echo ""
echo "0. No Ethernet card (no networking)"
echo "1. Intel Pro/100"
echo "2. Realtek 8139 based card"
echo "3. Realtek 8029 based card (emulated by Qemu)"
echo "4. NE2000, 3com 503 or WD based card (emulated by Bochs)"
echo "5. 3Com 501 or 3Com 509 based card"
echo "6. Different Ethernet card (no networking)"
echo ""
echo "You can always change your mind after the setup."
echo ""
step3=""
while [ "$step3" != ok ]
do
eth=""
echo -n "Ethernet card? [0] "; read eth
test -z $eth && eth=0
driver=""
driverargs=""
case "$eth" in
0) step3="ok"; ;;
1) step3="ok"; driver=fxp; ;;
2) step3="ok"; driver=rtl8139; ;;
3) step3="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=pci'"; ;;
4) step3="ok"; driver=dp8390; driverargs="dp8390_arg='DPETH0=240:9'";
echo ""
echo "Note: After installing, edit $LOCALRC to the right configuration."
echo " chose option 4, the defaults for emulation by Bochs have been set."
;;
5) step3="ok"; driver=dpeth; driverargs="#dpeth_arg='DPETH0=port:irq:memory'";
echo ""
echo "Note: After installing, edit $LOCALRC to the right configuration."
;;
6) step3="ok"; ;;
*) warn "choose a number"
esac
done
# end Step 3
fi
defmb=200
if [ ! "$auto" = r ]
then homesize=""
while [ -z "$homesize" ]
do
echo ""
echo -n "How big do you want your /home to be, in MB? [$defmb] "
read homesize
if [ "$homesize" = "" ] ; then homesize=$defmb; fi
echo -n "$homesize MB Ok? [Y] "
read ok
[ "$ok" = Y -o "$ok" = y -o "$ok" = "" ] || homesize=""
echo ""
done
# Homesize in sectors
homemb="$homesize MB"
homesize="`expr $homesize '*' 1024 '*' 2`"
else
# Homesize unchanged (reinstall)
homesize=exist
homemb="current size"
fi
root=${primary}s0
home=${primary}s1
usr=${primary}s2
umount /dev/$root 2>/dev/null && echo "Unmounted $root for you."
umount /dev/$home 2>/dev/null && echo "Unmounted $home for you."
umount /dev/$usr 2>/dev/null && echo "Unmounted $usr for you."
blockdefault=4
if [ ! "$auto" = "r" ]
then
echo ""
echo " --- Step 4: Select a block size ---------------------------------------"
echo ""
echo "The maximum (and default) file system block size is $blockdefault KB."
echo "For a small disk or small RAM you may want 1 or 2 KB blocks."
echo ""
while [ -z "$blocksize" ]
do
echo -n "Block size in kilobytes? [$blockdefault] "; read blocksize
test -z "$blocksize" && blocksize=$blockdefault
if [ "$blocksize" -ne 1 -a "$blocksize" -ne 2 -a "$blocksize" -ne $blockdefault ]
then
warn "1, 2 or 4 please"
blocksize=""
fi
done
else
blocksize=$blockdefault
fi
blocksizebytes="`expr $blocksize '*' 1024`"
echo "
You have selected to (re)install MINIX in the partition /dev/$primary.
The following subpartitions are now being created on /dev/$primary:
Root subpartition: /dev/$root 16 MB
/home subpartition: /dev/$home $homemb
/usr subpartition: /dev/$usr rest of $primary
"
# Secondary master bootstrap.
installboot -m /dev/$primary /usr/mdec/masterboot >/dev/null || exit
# Partition the primary.
partition /dev/$primary 1 81:32768* 81:$homesize 81:0+ > /dev/null || exit
echo "Creating /dev/$root .."
mkfs -B $blocksizebytes /dev/$root || exit
if [ ! "$auto" = r ]
then echo "Creating /dev/$home .."
mkfs -B $blocksizebytes /dev/$home || exit
fi
echo "Creating /dev/$usr .."
mkfs -B $blocksizebytes /dev/$usr || exit
echo ""
echo " --- Step 5: Wait for bad block detection ------------------------------"
echo ""
echo "Scanning disk for bad blocks. Hit CTRL+C to stop the scan if you are"
echo "sure that there can not be any bad blocks. Otherwise just wait."
trap ': nothing;echo' 2
echo ""
echo "Scanning /dev/$root for bad blocks:"
readall -b /dev/$root | sh
echo ""
echo "Scanning /dev/$home for bad blocks:"
readall -b /dev/$home | sh
echo ""
echo "Scanning /dev/$usr for bad blocks:"
readall -b /dev/$usr | sh
trap 2
echo ""
echo " --- Step 6: Wait for files to be copied -------------------------------"
echo ""
echo "This is the final step of the MINIX setup. All files will be now be"
echo "copied to your hard disk. This may take a while."
echo ""
mount /dev/$usr /mnt >/dev/null || exit # Mount the intended /usr.
files="`find /usr | wc -l`"
cpdir -v /usr /mnt | progressbar "$files" || exit # Copy the usr floppy.
# Set inet.conf to correct driver
if [ -n "$driver" ]
then echo "$driverargs" >$MYLOCALRC
disable=""
else disable="disable=inet;"
fi
umount /dev/$usr >/dev/null || exit # Unmount the intended /usr.
mount /dev/$root /mnt >/dev/null || exit
# Running from the installation CD.
files="`find / -xdev | wc -l`"
cpdir -vx / /mnt | progressbar "$files" || exit
if [ -n "$driver" ]
then echo "eth0 $driver 0 { default; };" >/mnt/etc/inet.conf
fi
# CD remnants that aren't for the installed system
rm /mnt/etc/issue /mnt/CD 2>/dev/null
# Change /etc/fstab. (No swap.)
# ${swap:+swap=/dev/$swap}
echo >/mnt/etc/fstab "\
# Poor man's File System Table.
root=/dev/$root
usr=/dev/$usr
home=/dev/$home"
# National keyboard map.
test -n "$keymap" && cp -p "/usr/lib/keymaps/$keymap.map" /mnt/etc/keymap
umount /dev/$root >/dev/null || exit # Unmount the new root.
mount /dev/$usr /mnt >/dev/null || exit
# Make bootable.
installboot -d /dev/$root /usr/mdec/bootblock /boot/boot >/dev/null || exit
edparams /dev/$root "rootdev=$root; ramimagedev=$root; $disable; minix(=,Start MINIX 3) { unset image; boot; }; smallminix(+,Start Small MINIX 3) { image=/boot/image_small; ramsize=0; boot; }; main() { echo By default, MINIX 3 will automatically load in 3 seconds.; echo Press ESC to enter the monitor for special configuration.; trap 3000 boot; menu; }; save" || exit
pfile="/mnt/src/tools/fdbootparams"
echo "rootdev=$root; ramimagedev=$root; $disable; save" >$pfile
sync
bios="`echo $primary | sed 's/d./dX/g'`"
echo "
Please type 'shutdown' to exit MINIX 3 and enter the boot monitor. At
the boot monitor prompt, type 'boot $bios', where X is the bios drive
number of the drive you installed on, to try your new MINIX system.
$biosdrivename
This ends the MINIX setup script. After booting your newly set up system,
you can run the test suites as indicated in the setup manual. You also
may want to take care of local configuration, such as securing your system
with a password. Please consult the usage manual for more information.
"