minix/kernel/arch/i386/klib.S
Ben Gras b41df2eb0d kernel: mon_return cleanup
cleanup of boot monitor related code.
2012-04-25 17:59:43 +02:00

950 lines
23 KiB
ArmAsm

/* sections */
#include <minix/config.h>
#include <minix/const.h>
#include <machine/asm.h>
#include <machine/interrupt.h>
#include <machine/vm.h>
#include "archconst.h"
#include "kernel/const.h"
#include "sconst.h"
#include <machine/multiboot.h>
/*
* This file contains a number of assembly code utility routines needed by the
* kernel.
*/
ENTRY(__main)
ret
/*===========================================================================*/
/* phys_insw */
/*===========================================================================*/
/*
* PUBLIC void phys_insw(Port_t port, phys_bytes buf, size_t count);
* Input an array from an I/O port. Absolute address version of insw().
*/
/* transfer data from (disk controller) port to memory */
ENTRY(phys_insw)
push %ebp
mov %esp, %ebp
cld
push %edi
push %es
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %es
mov 8(%ebp), %edx /* port to read from */
mov 12(%ebp), %edi /* destination addr */
mov 16(%ebp), %ecx /* byte count */
shr $1, %ecx /* word count */
rep insw /* input many words */
pop %es
pop %edi
pop %ebp
ret
/*===========================================================================*/
/* phys_insb */
/*===========================================================================*/
/*
* PUBLIC void phys_insb(Port_t port, phys_bytes buf, size_t count);
* Input an array from an I/O port. Absolute address version of insb().
*/
/* transfer data from (disk controller) port to memory byte by byte */
ENTRY(phys_insb)
push %ebp
mov %esp, %ebp
cld
push %edi
push %es
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %es
mov 8(%ebp), %edx /* port to read from */
mov 12(%ebp), %edi /* destination addr */
mov 16(%ebp), %ecx /* byte count */
rep insb /* input many bytes */
pop %es
pop %edi
pop %ebp
ret
/*===========================================================================*/
/* phys_outsw */
/*===========================================================================*/
/*
* PUBLIC void phys_outsw(Port_t port, phys_bytes buf, size_t count);
* Output an array to an I/O port. Absolute address version of outsw().
*/
/* transfer data from memory to (disk controller) port */
ENTRY(phys_outsw)
push %ebp
mov %esp, %ebp
cld
push %esi
push %ds
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %ds
mov 8(%ebp), %edx /* port to write to */
mov 12(%ebp), %esi /* source addr */
mov 16(%ebp), %ecx /* byte count */
shr $1, %ecx /* word count */
rep outsw /* output many words */
pop %ds
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* phys_outsb */
/*===========================================================================*/
/*
* PUBLIC void phys_outsb(Port_t port, phys_bytes buf, size_t count);
* Output an array to an I/O port. Absolute address version of outsb().
*/
/* transfer data from memory to (disk controller) port byte by byte */
ENTRY(phys_outsb)
push %ebp
mov %esp, %ebp
cld
push %esi
push %ds
mov $FLAT_DS_SELECTOR, %ecx
mov %cx, %ds
mov 8(%ebp), %edx /* port to write to */
mov 12(%ebp), %esi /* source addr */
mov 16(%ebp), %ecx /* byte count */
rep outsb /* output many bytes */
pop %ds
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* phys_copy */
/*===========================================================================*/
/*
* PUBLIC phys_bytes phys_copy(phys_bytes source, phys_bytes destination,
* phys_bytes bytecount);
* Copy a block of data from anywhere to anywhere in physical memory.
*/
PC_ARGS = 4+4+4+4 /* 4 + 4 + 4 */
/* es edi esi eip src dst len */
ENTRY(phys_copy)
cld
push %esi
push %edi
push %es
mov $FLAT_DS_SELECTOR, %eax
mov %ax, %es
mov PC_ARGS(%esp), %esi
mov PC_ARGS+4(%esp), %edi
mov PC_ARGS+4+4(%esp), %eax
cmp $10, %eax /* avoid align overhead for small counts */
jb pc_small
mov %esi, %ecx /* align source, hope target is too */
neg %ecx
and $3, %ecx /* count for alignment */
sub %ecx, %eax
rep movsb %es:(%esi), %es:(%edi)
mov %eax, %ecx
shr $2, %ecx /* count of dwords */
rep movsl %es:(%esi), %es:(%edi)
and $3, %eax
pc_small:
xchg %eax, %ecx /* remainder */
rep movsb %es:(%esi), %es:(%edi)
mov $0, %eax /* 0 means: no fault */
LABEL(phys_copy_fault) /* kernel can send us here */
pop %es
pop %edi
pop %esi
ret
LABEL(phys_copy_fault_in_kernel) /* kernel can send us here */
pop %es
pop %edi
pop %esi
mov %cr2, %eax
ret
/*===========================================================================*/
/* copy_msg_from_user */
/*===========================================================================*/
/*
* int copy_msg_from_user(struct proc * p, message * user_mbuf, message * dst);
*
* Copies a message of 36 bytes from user process space to a kernel buffer. This
* function assumes that the process address space is installed (cr3 loaded) and
* the local descriptor table of this process is loaded too.
*
* The %gs segment register is used to access the userspace memory. We load the
* process' data segment in this register.
*
* This function from the callers point of view either succeeds or returns an
* error which gives the caller a chance to respond accordingly. In fact it
* either succeeds or if it generates a pagefault, general protection or other
* exception, the trap handler has to redirect the execution to
* __user_copy_msg_pointer_failure where the error is reported to the caller
* without resolving the pagefault. It is not kernel's problem to deal with
* wrong pointers from userspace and the caller should return an error to
* userspace as if wrong values or request were passed to the kernel
*/
ENTRY(copy_msg_from_user)
push %gs
mov 8(%esp), %eax
movw DSREG(%eax), %gs
/* load the source pointer */
mov 12(%esp), %ecx
/* load the destination pointer */
mov 16(%esp), %edx
mov %gs:0*4(%ecx), %eax
mov %eax, 0*4(%edx)
mov %gs:1*4(%ecx), %eax
mov %eax, 1*4(%edx)
mov %gs:2*4(%ecx), %eax
mov %eax, 2*4(%edx)
mov %gs:3*4(%ecx), %eax
mov %eax, 3*4(%edx)
mov %gs:4*4(%ecx), %eax
mov %eax, 4*4(%edx)
mov %gs:5*4(%ecx), %eax
mov %eax, 5*4(%edx)
mov %gs:6*4(%ecx), %eax
mov %eax, 6*4(%edx)
mov %gs:7*4(%ecx), %eax
mov %eax, 7*4(%edx)
mov %gs:8*4(%ecx), %eax
mov %eax, 8*4(%edx)
LABEL(__copy_msg_from_user_end)
pop %gs
movl $0, %eax
ret
/*===========================================================================*/
/* copy_msg_to_user */
/*===========================================================================*/
/*
* void copy_msg_to_user(struct proc * p, message * src, message * user_mbuf);
*
* Copies a message of 36 bytes to user process space from a kernel buffer. This
* function assumes that the process address space is installed (cr3 loaded) and
* the local descriptor table of this process is loaded too.
*
* All the other copy_msg_from_user() comments apply here as well!
*/
ENTRY(copy_msg_to_user)
push %gs
mov 8(%esp), %eax
movw DSREG(%eax), %gs
/* load the source pointer */
mov 12(%esp), %ecx
/* load the destination pointer */
mov 16(%esp), %edx
mov 0*4(%ecx), %eax
mov %eax, %gs:0*4(%edx)
mov 1*4(%ecx), %eax
mov %eax, %gs:1*4(%edx)
mov 2*4(%ecx), %eax
mov %eax, %gs:2*4(%edx)
mov 3*4(%ecx), %eax
mov %eax, %gs:3*4(%edx)
mov 4*4(%ecx), %eax
mov %eax, %gs:4*4(%edx)
mov 5*4(%ecx), %eax
mov %eax, %gs:5*4(%edx)
mov 6*4(%ecx), %eax
mov %eax, %gs:6*4(%edx)
mov 7*4(%ecx), %eax
mov %eax, %gs:7*4(%edx)
mov 8*4(%ecx), %eax
mov %eax, %gs:8*4(%edx)
LABEL(__copy_msg_to_user_end)
pop %gs
movl $0, %eax
ret
/*
* if a function from a selected set of copies from or to userspace fails, it is
* because of a wrong pointer supplied by the userspace. We have to clean up and
* and return -1 to indicated that something wrong has happend. The place it was
* called from has to handle this situation. The exception handler redirect us
* here to continue, clean up and report the error
*/
ENTRY(__user_copy_msg_pointer_failure)
pop %gs
movl $-1, %eax
ret
/*===========================================================================*/
/* phys_memset */
/*===========================================================================*/
/*
* PUBLIC void phys_memset(phys_bytes source, unsigned long pattern,
* phys_bytes bytecount);
* Fill a block of physical memory with pattern.
*/
ENTRY(phys_memset)
push %ebp
mov %esp, %ebp
push %esi
push %ebx
push %ds
mov 8(%ebp), %esi
mov 16(%ebp), %eax
mov $FLAT_DS_SELECTOR, %ebx
mov %bx, %ds
mov 12(%ebp), %ebx
shr $2, %eax
fill_start:
mov %ebx, (%esi)
add $4, %esi
dec %eax
jne fill_start
/* Any remaining bytes? */
mov 16(%ebp), %eax
and $3, %eax
remain_fill:
cmp $0, %eax
je fill_done
movb 12(%ebp), %bl
movb %bl, (%esi)
add $1, %esi
inc %ebp
dec %eax
jmp remain_fill
fill_done:
pop %ds
pop %ebx
pop %esi
pop %ebp
ret
/*===========================================================================*/
/* mem_rdw */
/*===========================================================================*/
/*
* PUBLIC u16_t mem_rdw(U16_t segment, u16_t *offset);
* Load and return word at far pointer segment:offset.
*/
ENTRY(mem_rdw)
mov %ds, %cx
mov 4(%esp), %ds
mov 4+4(%esp), %eax /* offset */
movzwl (%eax), %eax /* word to return */
mov %cx, %ds
ret
/*===========================================================================*/
/* x86_triplefault */
/*===========================================================================*/
/*
* PUBLIC void x86_triplefault();
* Reset the system by loading IDT with offset 0 and interrupting.
*/
ENTRY(x86_triplefault)
lidt idt_zero
int $3 /* anything goes, the 386 will not like it */
.data
idt_zero:
.long 0, 0
.text
/*===========================================================================*/
/* halt_cpu */
/*===========================================================================*/
/*
* PUBLIC void halt_cpu(void);
* reanables interrupts and puts the cpu in the halts state. Once an interrupt
* is handled the execution resumes by disabling interrupts and continues
*/
ENTRY(halt_cpu)
sti
hlt /* interrupts enabled only after this instruction is executed! */
/*
* interrupt handlers make sure that the interrupts are disabled when we
* get here so we take only _one_ interrupt after halting the CPU
*/
ret
/*===========================================================================*/
/* read_flags */
/*===========================================================================*/
/*
* PUBLIC unsigned long read_cpu_flags(void);
* Read CPU status flags from C.
*/
ENTRY(read_cpu_flags)
pushf
mov (%esp), %eax
add $4, %esp
ret
ENTRY(read_ds)
mov $0, %eax
mov %ds, %ax
ret
ENTRY(read_cs)
mov $0, %eax
mov %cs, %ax
ret
ENTRY(read_ss)
mov $0, %eax
mov %ss, %ax
ret
/*===========================================================================*/
/* fpu_routines */
/*===========================================================================*/
/* non-waiting FPU initialization */
ENTRY(fninit)
fninit
ret
ENTRY(clts)
clts
ret
/* store status word (non-waiting) */
ENTRY(fnstsw)
xor %eax, %eax
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
fnstsw %ax
ret
/* store control word (non-waiting) */
ENTRY(fnstcw)
push %eax
mov 8(%esp), %eax
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
fnstcw (%eax)
pop %eax
ret
/*===========================================================================*/
/* fxsave */
/*===========================================================================*/
ENTRY(fxsave)
mov 4(%esp), %eax
fxsave (%eax) /* Do not change the operand! (gas2ack) */
ret
/*===========================================================================*/
/* fnsave */
/*===========================================================================*/
ENTRY(fnsave)
mov 4(%esp), %eax
fnsave (%eax) /* Do not change the operand! (gas2ack) */
fwait /* required for compatibility with processors prior pentium */
ret
/*===========================================================================*/
/* fxrstor */
/*===========================================================================*/
ENTRY(fxrstor)
mov 4(%esp), %eax
fxrstor (%eax)
ENTRY(__fxrstor_end)
xor %eax, %eax
ret
/*===========================================================================*/
/* frstor */
/*===========================================================================*/
ENTRY(frstor)
mov 4(%esp), %eax
frstor (%eax)
ENTRY(__frstor_end)
xor %eax, %eax
ret
/* Shared exception handler for both fxrstor and frstor. */
ENTRY(__frstor_failure)
mov $1, %eax
ret
/*===========================================================================*/
/* read_cr0 */
/*===========================================================================*/
/* PUBLIC unsigned long read_cr0(void); */
ENTRY(read_cr0)
push %ebp
mov %esp, %ebp
mov %cr0, %eax
pop %ebp
ret
/*===========================================================================*/
/* write_cr0 */
/*===========================================================================*/
/* PUBLIC void write_cr0(unsigned long value); */
ENTRY(write_cr0)
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
mov %eax, %cr0
jmp 0f /* A jump is required for some flags */
0:
pop %ebp
ret
/*===========================================================================*/
/* read_cr2 */
/*===========================================================================*/
/* PUBLIC reg_t read_cr2(void); */
ENTRY(read_cr2)
mov %cr2, %eax
ret
/*===========================================================================*/
/* read_cr3 */
/*===========================================================================*/
/* PUBLIC unsigned long read_cr3(void); */
ENTRY(read_cr3)
push %ebp
mov %esp, %ebp
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
mov %cr3, %eax
pop %ebp
ret
/*===========================================================================*/
/* read_cr4 */
/*===========================================================================*/
/* PUBLIC unsigned long read_cr4(void); */
ENTRY(read_cr4)
push %ebp
mov %esp, %ebp
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
mov %cr4, %eax
pop %ebp
ret
/*===========================================================================*/
/* write_cr4 */
/*===========================================================================*/
/* PUBLIC void write_cr4(unsigned long value); */
ENTRY(write_cr4)
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
mov %eax, %cr4
jmp 0f
0:
pop %ebp
ret
/*===========================================================================*/
/* write_cr3 */
/*===========================================================================*/
/* PUBLIC void write_cr3(unsigned long value); */
ENTRY(write_cr3)
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
/* DO NOT CHANGE THE OPERAND!!! gas2ack does not handle it yet */
mov %eax, %cr3
pop %ebp
ret
/*===========================================================================*/
/* i386_invlpg */
/*===========================================================================*/
/* PUBLIC void i386_invlpg(unsigned long linaddr); */
ENTRY(i386_invlpg)
push %ebp
mov %esp, %ebp
mov 8(%ebp), %eax
invlpg (%eax)
pop %ebp
ret
/*===========================================================================*/
/* getcr3val */
/*===========================================================================*/
/* PUBLIC unsigned long getcr3val(void); */
ENTRY(getcr3val)
mov %cr3, %eax
ret
/*
* Read the Model Specific Register (MSR) of IA32 architecture
*
* void ia32_msr_read(u32_t reg, u32_t * hi, u32_t * lo)
*/
ENTRY(ia32_msr_read)
push %ebp
mov %esp, %ebp
mov 8(%ebp), %ecx
rdmsr
mov 12(%ebp), %ecx
mov %edx, (%ecx)
mov 16(%ebp), %ecx
mov %eax, (%ecx)
pop %ebp
ret
/*
* Write the Model Specific Register (MSR) of IA32 architecture
*
* void ia32_msr_write(u32_t reg, u32_t hi, u32_t lo)
*/
ENTRY(ia32_msr_write)
push %ebp
mov %esp, %ebp
mov 12(%ebp), %edx
mov 16(%ebp), %eax
mov 8(%ebp), %ecx
wrmsr
pop %ebp
ret
/*===========================================================================*/
/* idt_reload */
/*===========================================================================*/
/* PUBLIC void idt_reload (void); */
/* reload idt when returning to monitor. */
ENTRY(idt_reload)
lidt _C_LABEL(gdt)+IDT_SELECTOR /* reload interrupt descriptor table */
ret
/*
* void reload_segment_regs(void)
*/
#define RELOAD_SEG_REG(reg) \
mov reg, %ax ;\
mov %ax, reg ;
ENTRY(reload_ds)
RELOAD_SEG_REG(%ds)
ret
/*===========================================================================*/
/* __switch_address_space */
/*===========================================================================*/
/* PUBLIC void __switch_address_space(struct proc *p, struct ** ptproc)
*
* sets the %cr3 register to the supplied value if it is not already set to the
* same value in which case it would only result in an extra TLB flush which is
* not desirable
*/
ENTRY(__switch_address_space)
/* read the process pointer */
mov 4(%esp), %edx
/* enable process' segment descriptors */
lldt P_LDT_SEL(%edx)
/* get the new cr3 value */
movl P_CR3(%edx), %eax
/* test if the new cr3 != NULL */
cmpl $0, %eax
je 0f
/*
* test if the cr3 is loaded with the current value to avoid unnecessary
* TLB flushes
*/
mov %cr3, %ecx
cmp %ecx, %eax
je 0f
mov %eax, %cr3
/* get ptproc */
mov 8(%esp), %eax
mov %edx, (%eax)
0:
ret
/*===========================================================================*/
/* poweroff */
/*===========================================================================*/
/* PUBLIC void poweroff(); */
/* Jump to 16-bit poweroff code */
ENTRY(poweroff_jmp)
cli
/* Make real mode descriptor */
mov $(_C_LABEL(gdt) + SS_SELECTOR), %edi
mov $0x100, %eax
movw %ax, 2(%edi)
shr $16, %eax
movb %al, 4(%edi)
and $0xff00, %ax
andw $0xff, 6(%edi)
or %ax, 6(%edi)
mov $0xffff, %eax
movw %ax, (%edi)
shr $16, %eax
and $0xf, %ax
andb $0xf0, 6(%edi)
or %ax, 6(%edi)
/* Flush TLB */
xor %eax, %eax
mov %eax, %cr3
xor %esp, %esp /* clear esp for real mode*/
/* Reset IDTR */
lidt idt_ptr
mov $SS_SELECTOR, %ax
mov %ax, %ds
mov %ax, %es
mov %ax, %fs
mov %ax, %gs
mov %ax, %ss
/* Save real mode cr0 in eax */
mov %cr0, %eax
andl $~I386_CR0_PE, %eax
/* Jump to 16-bit code that is copied to below 1MB */
ljmp $MON_CS_SELECTOR, $0
/* acknowledge just the master PIC */
ENTRY(eoi_8259_master)
movb $END_OF_INT, %al
outb $INT_CTL
ret
/* we have to acknowledge both PICs */
ENTRY(eoi_8259_slave)
movb $END_OF_INT, %al
outb $INT_CTL
outb $INT2_CTL
ret
/* in some cases we need to force TLB update, reloading cr3 does the trick */
ENTRY(refresh_tlb)
mov %cr3, %eax
mov %eax, %cr3
ret
#ifdef CONFIG_SMP
/*===========================================================================*/
/* smp_get_htt */
/*===========================================================================*/
/* PUBLIC int smp_get_htt(void); */
/* return true if the processor is hyper-threaded. */
ENTRY(smp_get_htt)
push %ebp
mov %esp, %ebp
pushf
pop %eax
mov %eax, %ebx
and $0x200000, %eax
je 0f
mov $0x1, %eax
/* FIXME don't use the byte code */
.byte 0x0f, 0xa2 /* opcode for cpuid */
mov %edx, %eax
pop %ebp
ret
0:
xor %eax, %eax
pop %ebp
ret
/*===========================================================================*/
/* smp_get_num_htt */
/*===========================================================================*/
/* PUBLIC int smp_get_num_htt(void); */
/* Get the number of hyper-threaded processor cores */
ENTRY(smp_get_num_htt)
push %ebp
mov %esp, %ebp
pushf
pop %eax
mov %eax, %ebx
and $0x200000, %eax
je 0f
mov $0x1, %eax
/* FIXME don't use the byte code */
.byte 0x0f, 0xa2 /* opcode for cpuid */
mov %ebx, %eax
pop %ebp
ret
0:
xor %eax, %eax
pop %ebp
ret
/*===========================================================================*/
/* smp_get_cores */
/*===========================================================================*/
/* PUBLIC int smp_get_cores(void); */
/* Get the number of cores. */
ENTRY(smp_get_cores)
push %ebp
mov %esp, %ebp
pushf
pop %eax
mov %eax, %ebx
and $0x200000, %eax
je 0f
push %ecx
xor %ecx, %ecx
mov $0x4, %eax
/* FIXME don't use the byte code */
.byte 0x0f, 0xa2 /* opcode for cpuid */
pop %ebp
ret
0:
xor %eax, %eax
pop %ebp
ret
/*===========================================================================*/
/* arch_spinlock_lock */
/*===========================================================================*/
/* void arch_spinlock_lock (u32_t *lock_data)
* {
* while (test_and_set(lock_data) == 1)
* while (*lock_data == 1)
* ;
* }
* eax register is clobbered.
*/
ENTRY(arch_spinlock_lock)
mov 4(%esp), %eax
mov $1, %edx
2:
mov $1, %ecx
xchg %ecx, (%eax)
test %ecx, %ecx
je 0f
cmp $(1<< 16), %edx
je 1f
shl %edx
1:
mov %edx, %ecx
3:
pause
sub $1, %ecx
test %ecx, %ecx
jz 2b
jmp 3b
0:
mfence
ret
/*===========================================================================*/
/* arch_spinlock_unlock */
/*===========================================================================*/
/* * void arch_spinlock_unlock (unsigned int *lockp) */
/* spin lock release routine. */
ENTRY(arch_spinlock_unlock)
mov 4(%esp), %eax
mov $0, %ecx
xchg %ecx, (%eax)
mfence
ret
#endif /* CONFIG_SMP */
/*===========================================================================*/
/* mfence */
/*===========================================================================*/
/* PUBLIC void mfence (void); */
/* architecture specific memory barrier routine. */
ENTRY(mfence)
mfence
ret
/*===========================================================================*/
/* arch_pause */
/*===========================================================================*/
/* PUBLIC void arch_pause (void); */
/* architecture specific pause routine. */
ENTRY(arch_pause)
pause
ret
/*===========================================================================*/
/* read_ebp */
/*===========================================================================*/
/* PUBLIC u16_t cpuid(void) */
ENTRY(read_ebp)
mov %ebp, %eax
ret
ENTRY(interrupts_enable)
sti
ret
ENTRY(interrupts_disable)
cli
ret
/*
* void switch_k_stack(void * esp, void (* continuation)(void));
*
* sets the current stack pointer to the given value and continues execution at
* the given address
*/
ENTRY(switch_k_stack)
/* get the arguments from the stack */
mov 8(%esp), %eax
mov 4(%esp), %ecx
mov $0, %ebp /* reset %ebp for stack trace */
mov %ecx, %esp /* set the new stack */
jmp *%eax /* and jump to the continuation */
/* NOT_REACHABLE */
0: jmp 0b
.data
idt_ptr:
.short 0x3ff
.long 0x0