164 lines
6.1 KiB
C
164 lines
6.1 KiB
C
/*
|
|
** File: 3c509.h Jun. 01, 2000
|
|
**
|
|
** Author: Giovanni Falzoni <gfalzoni@inwind.it>
|
|
**
|
|
** Interface description for 3Com Etherlink III board.
|
|
**
|
|
** $Log$
|
|
** Revision 1.1 2005/06/29 10:16:46 beng
|
|
** Import of dpeth 3c501/3c509b/.. ethernet driver by
|
|
** Giovanni Falzoni <fgalzoni@inwind.it>.
|
|
**
|
|
** Revision 2.0 2005/06/26 16:16:46 lsodgf0
|
|
** Initial revision for Minix 3.0.6
|
|
**
|
|
** $Id$
|
|
*/
|
|
|
|
/* Command codes */
|
|
#define CMD_GlobalReset 0x0000 /* resets adapter (power up status) */
|
|
#define CMD_SelectWindow (1<<11) /* select register window */
|
|
#define CMD_StartIntXcvr (2<<11) /* start internal transciver */
|
|
#define CMD_RxDisable (3<<11) /* rx disable */
|
|
#define CMD_RxEnable (4<<11) /* rx enable */
|
|
#define CMD_RxReset (5<<11) /* rx reset */
|
|
#define CMD_RxDiscard (8<<11) /* rx discard top packet */
|
|
#define CMD_TxEnable (9<<11) /* tx enable */
|
|
#define CMD_TxDisable (10<<11) /* tx disable */
|
|
#define CMD_TxReset (11<<11) /* tx reset */
|
|
#define CMD_Acknowledge (13<<11) /* acknowledge interrupt */
|
|
#define CMD_SetIntMask (14<<11) /* set interrupt mask */
|
|
#define CMD_SetStatusEnab (15<<11) /* set read zero mask */
|
|
#define CMD_SetRxFilter (16<<11) /* set rx filter */
|
|
#define CMD_SetTxAvailable (18<<11) /* set tx available threshold */
|
|
#define CMD_StatsEnable (21<<11) /* statistics enable */
|
|
#define CMD_StatsDisable (22<<11) /* statistics disable */
|
|
#define CMD_StopIntXcvr (23<<11) /* start internal transciver */
|
|
|
|
/* Status register bits (INT for interrupt sources, ST for the rest) */
|
|
#define INT_Latch 0x0001 /* interrupt latch */
|
|
#define INT_AdapterFail 0x0002 /* adapter failure */
|
|
#define INT_TxComplete 0x0004 /* tx complete */
|
|
#define INT_TxAvailable 0x0008 /* tx available */
|
|
#define INT_RxComplete 0x0010 /* rx complete */
|
|
#define INT_RxEarly 0x0020 /* rx early */
|
|
#define INT_Requested 0x0040 /* interrupt requested */
|
|
#define INT_UpdateStats 0x0080 /* update statistics */
|
|
|
|
/* Rx Status register bits */
|
|
#define RXS_Error 0x4000 /* error in packet */
|
|
#define RXS_Length 0x07FF /* bytes in RxFIFO */
|
|
#define RXS_ErrType 0x3800 /* Rx error type, bit 13-11 */
|
|
#define RXS_Overrun 0x0000 /* overrun error */
|
|
#define RXS_Oversize 0x0800 /* oversize packet error */
|
|
#define RXS_Dribble 0x1000 /* dribble bit (not an error) */
|
|
#define RXS_Runt 0x1800 /* runt packet error */
|
|
#define RXS_Framing 0x2000 /* framing error */
|
|
#define RXS_CRC 0x2800 /* CRC error */
|
|
|
|
/* Tx Status register bits */
|
|
|
|
/* Window Numbers */
|
|
#define WNO_Setup 0x0000 /* setup/configuration */
|
|
#define WNO_Operating 0x0001 /* operating set */
|
|
#define WNO_StationAddress 0x0002 /* station address setup/read */
|
|
#define WNO_Diagnostics 0x0004 /* diagnostics */
|
|
#define WNO_Statistics 0x0006 /* statistics */
|
|
|
|
/* Register offsets - Window 1 (WNO_Operating) */
|
|
#define REG_CmdStatus 0x000E /* command/status */
|
|
#define REG_TxFree 0x000C /* free transmit bytes */
|
|
#define REG_TxStatus 0x000B /* transmit status (byte) */
|
|
#define REG_RxStatus 0x0008 /* receive status */
|
|
#define REG_RxFIFO 0x0000 /* RxFIFO read */
|
|
#define REG_TxFIFO 0x0000 /* TxFIFO write */
|
|
|
|
/* Register offsets - Window 0 (WNO_Setup) */
|
|
#define REG_CfgControl 0x0004 /* configuration control */
|
|
|
|
/* Register offsets - Window 2 (WNO_StationAddress) */
|
|
#define REG_SA0_1 0x0000 /* station address bytes 0,1 */
|
|
|
|
/* Register offsets - Window 3 (WNO_FIFO) */
|
|
|
|
/* Register offsets - Window 4 (WNO_Diagnostics) */
|
|
#define REG_MediaStatus 0x000A /* media type/status */
|
|
|
|
/* Register offsets - Window 5 (WNO_Readable) */
|
|
|
|
/* Register offsets - Window 6 (WNO_Statistics) */
|
|
#define REG_TxBytes 0x000C /* tx bytes ok */
|
|
#define REG_RxBytes 0x000A /* rx bytes ok */
|
|
#define REG_TxDefer 0x0008 /* tx frames deferred (byte) */
|
|
#define REG_RxFrames 0x0007 /* rx frames ok (byte) */
|
|
#define REG_TxFrames 0x0006 /* tx frames ok (byte) */
|
|
#define REG_RxDiscarded 0x0005 /* rx frames discarded (byte) */
|
|
#define REG_TxLate 0x0004 /* tx frames late coll. (byte) */
|
|
#define REG_TxSingleColl 0x0003 /* tx frames one coll. (byte) */
|
|
#define REG_TxMultColl 0x0002 /* tx frames mult. coll. (byte) */
|
|
#define REG_TxNoCD 0x0001 /* tx frames no CDheartbt (byte) */
|
|
#define REG_TxCarrierLost 0x0000 /* tx frames carrier lost (byte) */
|
|
|
|
/* Various command arguments */
|
|
|
|
#define FilterIndividual 0x0001 /* individual address */
|
|
#define FilterMulticast 0x0002 /* multicast/group addresses */
|
|
#define FilterBroadcast 0x0004 /* broadcast address */
|
|
#define FilterPromiscuous 0x0008 /* promiscuous mode */
|
|
|
|
/* Resource Configuration Register bits */
|
|
#define EL3_CONFIG_IRQ_MASK 0xF000
|
|
|
|
/* Address Configuration Register bits */
|
|
#define EL3_CONFIG_XCVR_MASK 0xC000
|
|
#define EL3_CONFIG_IOBASE_MASK 0x001F
|
|
|
|
#define TP_XCVR 0x0000
|
|
#define BNC_XCVR 0xC000
|
|
#define AUI_XCVR 0x4000
|
|
|
|
#define EL3_IO_BASE_ADDR 0x200
|
|
|
|
/* Transmit Preamble */
|
|
|
|
/* Bits in various diagnostics registers */
|
|
#define MediaLBeatEnable 0x0080 /* link beat enable (TP) */
|
|
#define MediaJabberEnable 0x0040 /* jabber enable (TP) */
|
|
|
|
/* Board identification codes, byte swapped in Rev 0 */
|
|
#define EL3_3COM_CODE 0x6D50 /* EISA manufacturer code */
|
|
#define EL3_PRODUCT_ID 0x9050 /* Product ID for ISA board */
|
|
|
|
/* EEProm access */
|
|
#define EE_3COM_NODE_ADDR 0x00
|
|
#define EE_PROD_ID 0x03
|
|
#define EE_MANUFACTURING_DATA 0x04
|
|
#define EE_3COM_CODE 0x07
|
|
#define EE_ADDR_CFG 0x08
|
|
#define EE_RESOURCE_CFG 0x09
|
|
#define EE_SW_CONFIG_INFO 0x0D
|
|
#define EE_PROD_ID_MASK 0xF0FF /* Mask off revision nibble */
|
|
|
|
/* Contention logic */
|
|
#define EL3_READ_EEPROM 0x80
|
|
#define EL3_ID_GLOBAL_RESET 0xC0
|
|
#define EL3_SET_TAG_REGISTER 0xD0
|
|
#define EL3_ACTIVATE_AND_SET_IO 0xE0
|
|
#define EL3_ACTIVATE 0xFF
|
|
|
|
/* Software Configuration Register bits */
|
|
|
|
/* Configuration Control Register bits */
|
|
#define EL3_EnableAdapter 0x01
|
|
|
|
/* EL3 access macros */
|
|
#define inb_el3(dep,reg) (inb((dep)->de_base_port+(reg)))
|
|
#define inw_el3(dep,reg) (inw((dep)->de_base_port+(reg)))
|
|
#define outb_el3(dep,reg,data) (outb((dep)->de_base_port+(reg),(data)))
|
|
#define outw_el3(dep,reg,data) (outw((dep)->de_base_port+(reg),(data)))
|
|
|
|
#define SetWindow(win) \
|
|
outw(dep->de_base_port+REG_CmdStatus,CMD_SelectWindow|(win))
|
|
|
|
/** 3c509.h **/
|