60a61dffae
The BeagleBone Weather cape enhances the BeagleBone's capabilities by providing environment sensors (temperature, humidity, pressure, and ambient light level). The weatherstation demo is a port of the bonescript weatherstation to Minix. It provides a nice visual display of the sensor data in a web browser. The code is installed to /usr/share/beaglebone/weather on 'earm' and an embedded web server is started at boot time on port 80 when the cape is attached. Further details are provided in the README.txt file. Change-Id: I1596a2b66b213762ace26c0c750c8154c76b5c6e
54 lines
1.7 KiB
Plaintext
54 lines
1.7 KiB
Plaintext
_ _ _ _ _
|
|
__ _____ __ _| |_| |__ ___ _ __ ___| |_ __ _| |_(_) ___ _ __
|
|
\ \ /\ / / _ \/ _` | __| '_ \ / _ \ '__/ __| __/ _` | __| |/ _ \| '_ \
|
|
\ V V / __/ (_| | |_| | | | __/ | \__ \ || (_| | |_| | (_) | | | |
|
|
\_/\_/ \___|\__,_|\__|_| |_|\___|_| |___/\__\__,_|\__|_|\___/|_| |_|
|
|
|
|
Minix Demo for the BeagleBone Weather Cape
|
|
Based on https://github.com/jadonk/bonescript
|
|
|
|
|
|
Overview
|
|
--------
|
|
|
|
This is a demo of the BeagleBone Weather Cape. It's a fork of the original
|
|
bonescript weatherstation demo, modified to work on the Minix operating
|
|
system. The main changes are conversion from nodejs to JSON and mbar to hPa.
|
|
|
|
Requirements
|
|
------------
|
|
|
|
Hardware:
|
|
BeagleBone
|
|
BeagleBone Weather Cape
|
|
Network (doesn't have to be connected to the Internet)
|
|
|
|
Software:
|
|
Web Browser with HTML5 support and JavaScript enabled.
|
|
|
|
|
|
Setup
|
|
-----
|
|
|
|
This demo is meant to work 'out of the box'. It requires the BeagleBone be
|
|
connected to the network and have the BeagleBone Weather cape attached at
|
|
boot.
|
|
|
|
1) Attach the BeagleBone Weather Cape.
|
|
2) Connect a network cable to the BeagleBone.
|
|
3) Power on the BeagleBone.
|
|
4) Configure the network by running these commands.
|
|
# netconf
|
|
# reboot
|
|
5) Enter the BeagleBone's IP address into your web browser.
|
|
|
|
Usage
|
|
-----
|
|
|
|
This demo is a web application. You just need to point your web browser at
|
|
the BeagleBone's IP address to view a nice display of the sensor values. You
|
|
can get your BeagleBone's IP address by running `ifconfig` on the BeagleBone.
|
|
If the address is 192.168.12.138, you'd enter http://192.168.12.138/ into your
|
|
web browser.
|
|
|