minix/kernel/const.h
Jorrit Herder 89cf745fe2 Single boot driver loaded, while multiple can be included in the boot image.
The user needs to set label=... to choose the driver of his or her choice.
This driver will be mapped onto the controller that is set in controller=...

Minor cleanup of kernel source code (boot image table now is static).
2005-08-03 16:06:35 +00:00

82 lines
3 KiB
C
Executable file

/* General macros and constants used by the kernel. */
#ifndef CONST_H
#define CONST_H
#include <ibm/interrupt.h> /* interrupt numbers and hardware vectors */
#include <ibm/ports.h> /* port addresses and magic numbers */
#include <ibm/bios.h> /* BIOS addresses, sizes and magic numbers */
#include <ibm/cpu.h> /* BIOS addresses, sizes and magic numbers */
#include <minix/config.h>
#include "config.h"
/* To translate an address in kernel space to a physical address. This is
* the same as umap_local(proc_ptr, D, vir, sizeof(*vir)), but less costly.
*/
#define vir2phys(vir) (kinfo.data_base + (vir_bytes) (vir))
/* Map a process number to a privilege structure id. Used at boot time. */
#define s_nr_to_id(n) (NR_TASKS + (n) + 1)
#define s(n) (1 << s_nr_to_id(n))
/* Translate a pointer to a field in a structure to a pointer to the structure
* itself. So it translates '&struct_ptr->field' back to 'struct_ptr'.
*/
#define structof(type, field, ptr) \
((type *) (((char *) (ptr)) - offsetof(type, field)))
/* Constants used in virtual_copy(). Values must be 0 and 1, respectively. */
#define _SRC_ 0
#define _DST_ 1
/* Number of random sources */
#define RANDOM_SOURCES 16
/* Constants and macros for bit map manipulation. */
#define BITCHUNK_BITS (sizeof(bitchunk_t) * CHAR_BIT)
#define BITMAP_CHUNKS(nr_bits) (((nr_bits)+BITCHUNK_BITS-1)/BITCHUNK_BITS)
#define MAP_CHUNK(map,bit) (map)[((bit)/BITCHUNK_BITS)]
#define CHUNK_OFFSET(bit) ((bit)%BITCHUNK_BITS))
#define GET_BIT(map,bit) ( MAP_CHUNK(map,bit) & (1 << CHUNK_OFFSET(bit) )
#define SET_BIT(map,bit) ( MAP_CHUNK(map,bit) |= (1 << CHUNK_OFFSET(bit) )
#define UNSET_BIT(map,bit) ( MAP_CHUNK(map,bit) &= ~(1 << CHUNK_OFFSET(bit) )
#define get_sys_bit(map,bit) \
( MAP_CHUNK(map.chunk,bit) & (1 << CHUNK_OFFSET(bit) )
#define set_sys_bit(map,bit) \
( MAP_CHUNK(map.chunk,bit) |= (1 << CHUNK_OFFSET(bit) )
#define unset_sys_bit(map,bit) \
( MAP_CHUNK(map.chunk,bit) &= ~(1 << CHUNK_OFFSET(bit) )
#define NR_SYS_CHUNKS BITMAP_CHUNKS(NR_SYS_PROCS)
#if (CHIP == INTEL)
/* Program stack words and masks. */
#define INIT_PSW 0x0200 /* initial psw */
#define INIT_TASK_PSW 0x1200 /* initial psw for tasks (with IOPL 1) */
#define TRACEBIT 0x0100 /* OR this with psw in proc[] for tracing */
#define SETPSW(rp, new) /* permits only certain bits to be set */ \
((rp)->p_reg.psw = (rp)->p_reg.psw & ~0xCD5 | (new) & 0xCD5)
#define IF_MASK 0x00000200
#define IOPL_MASK 0x003000
/* Disable/ enable hardware interrupts. The parameters of lock() and unlock()
* are used when debugging is enabled. See debug.h for more information.
*/
#define lock(c, v) intr_disable();
#define unlock(c) intr_enable();
/* Sizes of memory tables. The boot monitor distinguishes three memory areas,
* namely low mem below 1M, 1M-16M, and mem after 16M. More chunks are needed
* for DOS MINIX.
*/
#define NR_MEMS 8
#endif /* (CHIP == INTEL) */
#if (CHIP == M68000)
/* M68000 specific constants go here. */
#endif /* (CHIP == M68000) */
#endif /* CONST_H */