minix/drivers/mmc/mmchost_mmchs.c

/* kernel headers */
#include <minix/blockdriver.h>
#include <minix/com.h>
#include <minix/vm.h>
#include <sys/mman.h>

/* usr headers */
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <inttypes.h>
#include <limits.h>

/* local headers */
#include "mmclog.h"
#include "mmchost.h"

/* header imported from netbsd */
#include "sdmmcreg.h"
#include "sdmmcreg.h"
#include "sdhcreg.h"

/* omap /hardware related */
#include "omap_mmc.h"

#define REG(x)(*((volatile uint32_t *)(x)))
#define BIT(x)(0x1 << x)

/* Write a uint32_t value to a memory address. */
inline void
write32(uint32_t address, uint32_t value)
{
	REG(address) = value;
}

/* Read an uint32_t from a memory address */
inline uint32_t
read32(uint32_t address)
{

	return REG(address);
}

/* Set a 32 bits value depending on a mask */
inline void
set32(uint32_t address, uint32_t mask, uint32_t value)
{
	uint32_t val;
	val = read32(address);
	/* clear the bits */
	val &= ~(mask);
	/* apply the value using the mask */
	val |= (value & mask);
	write32(address, val);
}

static uint32_t base_address;

/*
 * Initialize the MMC controller given a certain
 * instance. this driver only handles a single
 * mmchs controller at a given time.
 */
int
mmchs_init(uint32_t instance)
{
	int counter;
	uint32_t value;

	counter = 0;
	value = 0;

	struct minix_mem_range mr;

	mr.mr_base = MMCHS1_REG_BASE;
	mr.mr_limit = MMCHS1_REG_BASE + 0x400;

	if (sys_privctl(SELF, SYS_PRIV_ADD_MEM, &mr) != 0) {
		panic("Unable to request permission to map memory");
	}

	/* Set the base address to use */
	base_address =
	    (uint32_t) vm_map_phys(SELF, (void *) MMCHS1_REG_BASE, 0x400);
	if (base_address == (uint32_t) MAP_FAILED)
		panic("Unable to map MMC memory");

	base_address = (unsigned long) base_address - 0x100;

	/*  Soft reset of the controller. This section is documented in the TRM */

	/* Write 1 to sysconfig[0] to trigger a reset */
	set32(base_address + MMCHS_SD_SYSCONFIG, MMCHS_SD_SYSCONFIG_SOFTRESET,
	    MMCHS_SD_SYSCONFIG_SOFTRESET);

	/* Read sysstatus to know when it's done */
	while (!(read32(base_address + MMCHS_SD_SYSSTATUS)
		& MMCHS_SD_SYSSTATUS_RESETDONE)) {
		/* TODO:Add proper delay and escape route */

		counter++;
	}

	/* Set SD default capabilities */
	set32(base_address + MMCHS_SD_CAPA, MMCHS_SD_CAPA_VS_MASK,
	    MMCHS_SD_CAPA_VS18 | MMCHS_SD_CAPA_VS30);

	/* TRM mentions MMCHS_SD_CUR_CAPA but does not describe how to limit
	 * the current */

	uint32_t mask =
	    MMCHS_SD_SYSCONFIG_AUTOIDLE | MMCHS_SD_SYSCONFIG_ENAWAKEUP |
	    MMCHS_SD_SYSCONFIG_STANDBYMODE | MMCHS_SD_SYSCONFIG_CLOCKACTIVITY |
	    MMCHS_SD_SYSCONFIG_SIDLEMODE;

	/* Automatic clock gating strategy */
	value = MMCHS_SD_SYSCONFIG_AUTOIDLE_EN;
	/* Enable wake-up capability */
	value |= MMCHS_SD_SYSCONFIG_ENAWAKEUP_EN;
	/* Smart-idle */
	value |= MMCHS_SD_SYSCONFIG_SIDLEMODE_IDLE;
	/* Booth the interface and functional can be switched off */
	value |= MMCHS_SD_SYSCONFIG_CLOCKACTIVITY_OFF;
	/* Go into wake-up mode when possible */
	value |= MMCHS_SD_SYSCONFIG_STANDBYMODE_WAKEUP_INTERNAL;

	/* 
	 * wake-up configuration
	 */
	set32(base_address + MMCHS_SD_SYSCONFIG, mask, value);

	/* Wake-up on sd interrupt for SDIO */
	set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_IWE,
	    MMCHS_SD_HCTL_IWE_EN);

	/* 
	 * MMC host and bus configuration
	 */

	/* Configure data and command transfer (1 bit mode) */
	set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_DW8,
	    MMCHS_SD_CON_DW8_1BIT);
	set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_DTW,
	    MMCHS_SD_HCTL_DTW_1BIT);

	/* Configure card voltage to 3.0 volt */
	set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_SDVS,
	    MMCHS_SD_HCTL_SDVS_VS30);

	/* Power on the host controller and wait for the
	 * MMCHS_SD_HCTL_SDBP_POWER_ON to be set */
	set32(base_address + MMCHS_SD_HCTL, MMCHS_SD_HCTL_SDBP,
	    MMCHS_SD_HCTL_SDBP_ON);

	/* TODO: Add padconf stuff here as documented in the TRM*/

	while ((read32(base_address + MMCHS_SD_HCTL) & MMCHS_SD_HCTL_SDBP)
	    != MMCHS_SD_HCTL_SDBP_ON) {
		/* TODO:Add proper delay and escape route */
		counter++;
	}

	/* Enable internal clock and clock to the card */
	set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_ICE,
	    MMCHS_SD_SYSCTL_ICE_EN);

	// @TODO Fix external clock enable , this one is very slow
	set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_CLKD,
	    (0x3ff << 6));
	set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_CEN,
	    MMCHS_SD_SYSCTL_CEN_EN);
	counter = 0;

	while ((read32(base_address + MMCHS_SD_SYSCTL) & MMCHS_SD_SYSCTL_ICS)
	    != MMCHS_SD_SYSCTL_ICS_STABLE) {
		/* TODO:Add proper delay and escape route */
		counter++;
	}

	/* 
	 * See spruh73e page 3576  Card Detection, Identification, and Selection
	 */

	/* Enable command interrupt */
	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_CC_ENABLE,
	    MMCHS_SD_IE_CC_ENABLE_ENABLE);
	/* Enable transfer complete interrupt */
	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_TC_ENABLE,
	    MMCHS_SD_IE_TC_ENABLE_ENABLE);

	/* enable error interrupts */
	/* NOTE: We are currently skipping the BADA interrupt it does get
	 * raised for unknown reasons */
	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_ERROR_MASK, 0x0fffffffu);

	/* clean the error interrupts */
	set32(base_address + MMCHS_SD_STAT, MMCHS_SD_STAT_ERROR_MASK,
	    0xffffffffu);

	/* send a init signal to the host controller. This does not actually
	 * send a command to a card manner */
	set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_INIT,
	    MMCHS_SD_CON_INIT_INIT);
	/* command 0 , type other commands not response etc) */
	write32(base_address + MMCHS_SD_CMD, 0x00);

	counter = 0;
	while ((read32(base_address + MMCHS_SD_STAT) & MMCHS_SD_STAT_CC)
	    != MMCHS_SD_STAT_CC_RAISED) {
		if (read32(base_address + MMCHS_SD_STAT) & 0x8000) {
			printf("%s, error stat  %x\n", __FUNCTION__,
			    read32(base_address + MMCHS_SD_STAT));
			return 1;
		}
		counter++;
	}

	/* clear the cc interrupt status */
	set32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_CC_ENABLE,
	    MMCHS_SD_IE_CC_ENABLE_ENABLE);

	/* 
	 * Set Set SD_CON[1] INIT bit to 0x0 to end the initialization sequence
	 */
	set32(base_address + MMCHS_SD_CON, MMCHS_SD_CON_INIT,
	    MMCHS_SD_CON_INIT_NOINIT);

	/* Clean the MMCHS_SD_STAT register */
	write32(base_address + MMCHS_SD_STAT, 0xffffffffu);
	return 0;
}

int
mmchs_send_cmd(uint32_t command, uint32_t arg)
{
	int count = 0;

	/* Read current interrupt status and fail it an interrupt is already
	 * asserted */
	if ((read32(base_address + MMCHS_SD_STAT) & 0xffffu)) {
		printf("%s, interrupt already raised stat  %08x\n",
		    __FUNCTION__, read32(base_address + MMCHS_SD_STAT));
		write32(base_address + MMCHS_SD_STAT,
		    MMCHS_SD_IE_CC_ENABLE_CLEAR);
		// return 1;
	}

	/* Set arguments */
	write32(base_address + MMCHS_SD_ARG, arg);
	/* Set command */
	set32(base_address + MMCHS_SD_CMD, MMCHS_SD_CMD_MASK, command);

	/* Wait for completion */
	while ((read32(base_address + MMCHS_SD_STAT) & 0xffffu) == 0x0) {
		count++;
	}

	if (read32(base_address + MMCHS_SD_STAT) & 0x8000) {
		printf("%s, error stat  %08x\n", __FUNCTION__,
		    read32(base_address + MMCHS_SD_STAT));
		set32(base_address + MMCHS_SD_STAT, MMCHS_SD_STAT_ERROR_MASK,
		    0xffffffffu);
		return 1;
	}

	if ((command & MMCHS_SD_CMD_RSP_TYPE) ==
	    MMCHS_SD_CMD_RSP_TYPE_48B_BUSY) {
		/* 
		 * Command with busy response *CAN* also set the TC bit if they exit busy
		 */
		while ((read32(base_address + MMCHS_SD_STAT)
			& MMCHS_SD_IE_TC_ENABLE_ENABLE) == 0) {
			count++;
		}
		write32(base_address + MMCHS_SD_STAT,
		    MMCHS_SD_IE_TC_ENABLE_CLEAR);
	}

	/* clear the cc status */
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_CC_ENABLE_CLEAR);
	return 0;
}

int
mmc_send_cmd(struct mmc_command *c)
{

	/* convert the command to a hsmmc command */
	int ret;
	uint32_t cmd, arg;
	cmd = MMCHS_SD_CMD_INDX_CMD(c->cmd);
	arg = c->args;

	switch (c->resp_type) {
	case RESP_LEN_48_CHK_BUSY:
		cmd |= MMCHS_SD_CMD_RSP_TYPE_48B_BUSY;
		break;
	case RESP_LEN_48:
		cmd |= MMCHS_SD_CMD_RSP_TYPE_48B;
		break;
	case RESP_LEN_136:
		cmd |= MMCHS_SD_CMD_RSP_TYPE_136B;
		break;
	case NO_RESPONSE:
		cmd |= MMCHS_SD_CMD_RSP_TYPE_NO_RESP;
		break;
	default:
		return 1;
	}

	ret = mmchs_send_cmd(cmd, arg);

	/* copy response into cmd->resp */
	switch (c->resp_type) {
	case RESP_LEN_48_CHK_BUSY:
	case RESP_LEN_48:
		c->resp[0] = read32(base_address + MMCHS_SD_RSP10);
		break;
	case RESP_LEN_136:
		c->resp[0] = read32(base_address + MMCHS_SD_RSP10);
		c->resp[1] = read32(base_address + MMCHS_SD_RSP32);
		c->resp[2] = read32(base_address + MMCHS_SD_RSP54);
		c->resp[3] = read32(base_address + MMCHS_SD_RSP76);
		break;
	case NO_RESPONSE:
		break;
	default:
		return 1;
	}

	return ret;
}

static struct mmc_command command;

int
card_goto_idle_state()
{
	command.cmd = MMC_GO_IDLE_STATE;
	command.resp_type = NO_RESPONSE;
	command.args = 0x00;
	if (mmc_send_cmd(&command)) {
		// Failure
		return 1;
	}
	return 0;
}

int
card_identification()
{
	command.cmd = MMC_SEND_EXT_CSD;
	command.resp_type = RESP_LEN_48;
	command.args = MMCHS_SD_ARG_CMD8_VHS | MMCHS_SD_ARG_CMD8_CHECK_PATTERN;

	if (mmc_send_cmd(&command)) {
		// We currently only support 2.0,
		return 1;
	}

	if (!(command.resp[0]
		== (MMCHS_SD_ARG_CMD8_VHS | MMCHS_SD_ARG_CMD8_CHECK_PATTERN))) {
		printf("%s, check pattern check failed  %08x\n", __FUNCTION__,
		    command.resp[0]);
		return 1;
	}
	return 0;
}

int
card_query_voltage_and_type(struct sd_card_regs *card)
{

	command.cmd = MMC_APP_CMD;
	command.resp_type = RESP_LEN_48;
	command.args = MMC_ARG_RCA(0x0);	/* RCA=0000 */
	if (mmc_send_cmd(&command)) {
		return 1;
	}

	command.cmd = SD_APP_OP_COND;
	command.resp_type = RESP_LEN_48;

	/* 0x1 << 30 == send HCS (Host capacity support) and get OCR register */
	command.args =
	    MMC_OCR_3_3V_3_4V | MMC_OCR_3_2V_3_3V | MMC_OCR_3_1V_3_2V |
	    MMC_OCR_3_0V_3_1V | MMC_OCR_2_9V_3_0V | MMC_OCR_2_8V_2_9V |
	    MMC_OCR_2_7V_2_8V;
	command.args |= MMC_OCR_HCS;	/* RCA=0000 */

	if (mmc_send_cmd(&command)) {
		return 1;
	}
	/* @todo wait for max 1 ms */
	while (!(command.resp[0] & MMC_OCR_MEM_READY)) {
		command.cmd = MMC_APP_CMD;
		command.resp_type = RESP_LEN_48;
		command.args = MMC_ARG_RCA(0x0);	/* RCA=0000 */
		if (mmc_send_cmd(&command)) {
			return 1;
		}

		/* Send ADMD41 */
		/* 0x1 << 30 == send HCS (Host capacity support) and get OCR
		 * register */
		command.cmd = SD_APP_OP_COND;
		command.resp_type = RESP_LEN_48;
		/* 0x1 << 30 == send HCS (Host capacity support) */
		command.args = MMC_OCR_3_3V_3_4V | MMC_OCR_3_2V_3_3V
		    | MMC_OCR_3_1V_3_2V | MMC_OCR_3_0V_3_1V | MMC_OCR_2_9V_3_0V
		    | MMC_OCR_2_8V_2_9V | MMC_OCR_2_7V_2_8V;
		command.args |= MMC_OCR_HCS;	/* RCA=0000 */

		if (mmc_send_cmd(&command)) {
			return 1;
		}

		/* if bit 31 is set the response is valid */
		if ((command.resp[0] & MMC_OCR_MEM_READY)) {
			break;
		}

	}
	card->ocr = command.resp[3];
	return 0;
}

int
card_identify(struct sd_card_regs *card)
{

	/* Send cmd 2 (all_send_cid) and expect 136 bits response */
	command.cmd = MMC_ALL_SEND_CID;
	command.resp_type = RESP_LEN_136;
	command.args = MMC_ARG_RCA(0x0);	/* RCA=0000 */

	if (mmc_send_cmd(&command)) {
		return 1;
	}

	card->cid[0] = command.resp[0];
	card->cid[1] = command.resp[1];
	card->cid[2] = command.resp[2];
	card->cid[3] = command.resp[3];

	command.cmd = MMC_SET_RELATIVE_ADDR;
	command.resp_type = RESP_LEN_48;
	command.args = 0x0;	/* RCA=0000 */

	/* R6 response */
	if (mmc_send_cmd(&command)) {
		return 1;
	}

	card->rca = SD_R6_RCA(command.resp);
	/* MMHCS only supports a single card so sending MMCHS_SD_CMD_CMD2 is
	 * useless Still we should make it possible in the API to support
	 * multiple cards */

	return 0;
}

int
card_csd(struct sd_card_regs *card)
{
	/* send_csd -> r2 response */
	command.cmd = MMC_SEND_CSD;
	command.resp_type = RESP_LEN_136;
	command.args = MMC_ARG_RCA(card->rca);	/* card rca */

	if (mmc_send_cmd(&command)) {
		return 1;
	}

	card->csd[0] = command.resp[0];
	card->csd[1] = command.resp[1];
	card->csd[2] = command.resp[2];
	card->csd[3] = command.resp[3];

	if (SD_CSD_CSDVER(card->csd) != SD_CSD_CSDVER_2_0) {
		printf("Version 2.0 of CSD register expected\n");
		return 1;
	}

	/* sanity check */
	// printf("size = %llu bytes\n", (long long
	// unsigned)SD_CSD_V2_CAPACITY( card->csd) * 512);
	return 0;
}

int
select_card(struct sd_card_regs *card)
{

	command.cmd = MMC_SELECT_CARD;
	command.resp_type = RESP_LEN_48_CHK_BUSY;
	command.args = MMC_ARG_RCA(card->rca);	/* card rca */

	if (mmc_send_cmd(&command)) {
		return 1;
	}
	return 0;
}

int
read_single_block(struct sd_card_regs *card,
    uint32_t blknr, unsigned char *buf)
{
	uint32_t count;
	uint32_t value;

	count = 0;

	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BRR_ENABLE,
	    MMCHS_SD_IE_BRR_ENABLE_ENABLE);

	set32(base_address + MMCHS_SD_BLK, MMCHS_SD_BLK_BLEN, 512);

	/* read single block */
	if (mmchs_send_cmd(MMCHS_SD_CMD_INDX_CMD(MMC_READ_BLOCK_SINGLE)
		| MMCHS_SD_CMD_DP_DATA	/* Command with data transfer */
		| MMCHS_SD_CMD_RSP_TYPE_48B	/* type (R1) */
		| MMCHS_SD_CMD_MSBS_SINGLE	/* single block */
		| MMCHS_SD_CMD_DDIR_READ	/* read data from card */
		, blknr)) {
		return 1;
	}

	while ((read32(base_address + MMCHS_SD_STAT)
		& MMCHS_SD_IE_BRR_ENABLE_ENABLE) == 0) {
		count++;
	}

	if (!(read32(base_address + MMCHS_SD_PSTATE) & MMCHS_SD_PSTATE_BRE_EN)) {
		return 1;	/* We are not allowed to read data from the
				 * data buffer */
	}

	for (count = 0; count < 512; count += 4) {
		value = read32(base_address + MMCHS_SD_DATA);
		buf[count] = *((char *) &value);
		buf[count + 1] = *((char *) &value + 1);
		buf[count + 2] = *((char *) &value + 2);
		buf[count + 3] = *((char *) &value + 3);
	}

	/* Wait for TC */
	while ((read32(base_address +
		    MMCHS_SD_STAT) & MMCHS_SD_IE_TC_ENABLE_ENABLE)
	    == 0) {
		count++;
	}
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_TC_ENABLE_CLEAR);

	/* clear and disable the bbr interrupt */
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_BRR_ENABLE_CLEAR);
	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BRR_ENABLE,
	    MMCHS_SD_IE_BRR_ENABLE_DISABLE);
	return 0;
}

int
write_single_block(struct sd_card_regs *card,
    uint32_t blknr, unsigned char *buf)
{
	uint32_t count;
	uint32_t value;

	count = 0;

	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BWR_ENABLE,
	    MMCHS_SD_IE_BWR_ENABLE_ENABLE);
	// set32(base_address + MMCHS_SD_IE, 0xfff , 0xfff);
	set32(base_address + MMCHS_SD_BLK, MMCHS_SD_BLK_BLEN, 512);

	/* Set timeout */
	set32(base_address + MMCHS_SD_SYSCTL, MMCHS_SD_SYSCTL_DTO,
	    MMCHS_SD_SYSCTL_DTO_2POW27);

	/* write single block */
	if (mmchs_send_cmd(MMCHS_SD_CMD_INDX_CMD(MMC_WRITE_BLOCK_SINGLE)
		| MMCHS_SD_CMD_DP_DATA	/* Command with data transfer */
		| MMCHS_SD_CMD_RSP_TYPE_48B	/* type (R1b) */
		| MMCHS_SD_CMD_MSBS_SINGLE	/* single block */
		| MMCHS_SD_CMD_DDIR_WRITE	/* write to the card */
		, blknr)) {
		return 1;
	}

	/* Wait for the MMCHS_SD_IE_BWR_ENABLE interrupt */
	while ((read32(base_address +
		    MMCHS_SD_STAT) & MMCHS_SD_IE_BWR_ENABLE) == 0) {
		count++;
	}

	if (!(read32(base_address + MMCHS_SD_PSTATE) & MMCHS_SD_PSTATE_BWE_EN)) {
		return 1;	/* not ready to write data */
	}
	for (count = 0; count < 512; count += 4) {
		*((char *) &value) = buf[count];
		*((char *) &value + 1) = buf[count + 1];
		*((char *) &value + 2) = buf[count + 2];
		*((char *) &value + 3) = buf[count + 3];
		write32(base_address + MMCHS_SD_DATA, value);
	}

	/* Wait for TC */
	while ((read32(base_address +
		    MMCHS_SD_STAT) & MMCHS_SD_IE_TC_ENABLE_ENABLE)
	    == 0) {
		count++;
	}
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_TC_ENABLE_CLEAR);
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_CC_ENABLE_CLEAR);	/* finished. 
										 */
	/* clear the bwr interrupt FIXME is this right when writing? */
	write32(base_address + MMCHS_SD_STAT, MMCHS_SD_IE_BWR_ENABLE_CLEAR);
	set32(base_address + MMCHS_SD_IE, MMCHS_SD_IE_BWR_ENABLE,
	    MMCHS_SD_IE_BWR_ENABLE_DISABLE);
	return 0;
}

/*
 * Define a structure to be used for logging
 */
static struct mmclog log = {
	.name = "mmc_host_mmchs",
	.log_level = LEVEL_INFO,
	.log_func = default_log
};

int
mmchs_host_init(struct mmc_host *host)
{
	mmchs_init(1);
	return 0;
}

void
mmchs_set_log_level(int level)
{
	if (level >= 0 && level <= 4) {
		log.log_level = level;
	}
}

int
mmchs_host_set_instance(struct mmc_host *host, int instance)
{
	mmc_log_info(&log, "Using instance number %d\n", instance);
	if (instance != 0) {
		return EIO;
	}
	return OK;
}

int
mmchs_host_reset(struct mmc_host *host)
{
	mmchs_init(1);
	return 0;
}

int
mmchs_card_detect(struct sd_slot *slot)
{
	/* @TODO implement proper card detect */
	return 1;
}

struct sd_card *
mmchs_card_initialize(struct sd_slot *slot)
{
	mmchs_init(1);

	struct sd_card *card;
	card = &slot->card;
	memset(card, 0, sizeof(struct sd_card));
	card->slot = slot;

	if (card_identification()) {
		printf("Failed to do card_identification\n");
		return NULL;
	}

	if (card_query_voltage_and_type(&slot->card.regs)) {
		printf("Failed to do card_query_voltage_and_type\n");
		return NULL;
	}
	if (card_identify(&slot->card.regs)) {
		printf("Failed to identify card\n");
		return NULL;
	}
	/* We have now initialized the hardware identified the card */
	if (card_csd(&slot->card.regs)) {
		printf("failed to read csd (card specific data)\n");
		return NULL;
	}

	if (select_card(&slot->card.regs)) {
		printf("Failed to select card\n");
		return NULL;
	}

	if (SD_CSD_READ_BL_LEN(slot->card.regs.csd) != 0x09) {
		/* for CSD version 2.0 the value is fixed to 0x09 and means a
		 * block size of 512 */
		printf("Block size expect to be 512\n");
		return NULL;
	}

	slot->card.blk_size = 512;	/* HARDCODED value */
	slot->card.blk_count = SD_CSD_V2_CAPACITY(slot->card.regs.csd);
	slot->card.state = SD_MODE_DATA_TRANSFER_MODE;

	memset(slot->card.part, 0, sizeof(slot->card.part));
	memset(slot->card.subpart, 0, sizeof(slot->card.subpart));
	slot->card.part[0].dv_base = 0;
	slot->card.part[0].dv_size =
	    (unsigned long long) SD_CSD_V2_CAPACITY(slot->card.regs.csd) * 512;
	return &slot->card;
}

/* read count blocks into existing buf */
static int
mmchs_host_read(struct sd_card *card,
    uint32_t blknr, uint32_t count, unsigned char *buf)
{
	uint32_t i;
	i = count;
	for (i = 0; i < count; i++) {
		read_single_block(&card->regs, blknr + i,
		    buf + (i * card->blk_size));
	}
	return OK;
}

/* write count blocks */
static int
mmchs_host_write(struct sd_card *card,
    uint32_t blknr, uint32_t count, unsigned char *buf)
{
	uint32_t i;

	i = count;
	for (i = 0; i < count; i++) {
		write_single_block(&card->regs, blknr + i,
		    buf + (i * card->blk_size));
	}

	return OK;
}

int
mmchs_card_release(struct sd_card *card)
{
	assert(card->open_ct == 1);
	card->open_ct--;
	card->state = SD_MODE_UNINITIALIZED;
	/* TODO:Set card state */
	return OK;
}

void
host_initialize_host_structure(struct mmc_host *host)
{
	/* Initialize the basic data structures host slots and cards */
	int i;

	host->host_set_instance = mmchs_host_set_instance;
	host->host_init = mmchs_host_init;
	host->set_log_level = mmchs_set_log_level;
	host->host_reset = mmchs_host_reset;
	host->card_detect = mmchs_card_detect;
	host->card_initialize = mmchs_card_initialize;
	host->card_release = mmchs_card_release;
	host->read = mmchs_host_read;
	host->write = mmchs_host_write;

	/* initialize data structures */
	for (i = 0; i < sizeof(host->slot) / sizeof(host->slot[0]); i++) {
		// @TODO set initial card and slot state
		host->slot[i].host = host;
		host->slot[i].card.slot = &host->slot[i];
	}
}