minix/drivers/dpeth/3c501.c
Arun Thomas 436d6012a3 Convert drivers/ and servers/ over to bsdmake
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00

419 lines
11 KiB
C

/*
** File: 3c501.c Jan. 14, 1997
**
** Author: Giovanni Falzoni <gfalzoni@inwind.it>
**
** This file contains specific implementation of the ethernet
** device driver for 3Com Etherlink (3c501) boards. This is a
** very old board and its performances are very poor for today
** network environments.
**
** $Id$
*/
#include <minix/drivers.h>
#include <minix/com.h>
#include <net/gen/ether.h>
#include <net/gen/eth_io.h>
#include "dp.h"
#if (ENABLE_3C501 == 1)
#include "3c501.h"
static unsigned char StationAddress[SA_ADDR_LEN] = {0, 0, 0, 0, 0, 0,};
static buff_t *TxBuff = NULL;
/*
** Name: void el1_getstats(dpeth_t *dep)
** Function: Reads statistics counters from board.
**/
static void el1_getstats(dpeth_t * dep)
{
return; /* Nothing to do */
}
/*
** Name: void el1_reset(dpeth_t *dep)
** Function: Reset function specific for Etherlink hardware.
*/
static void el1_reset(dpeth_t * dep)
{
int ix;
for (ix = 0; ix < 8; ix += 1) /* Resets the board */
outb_el1(dep, EL1_CSR, ECSR_RESET);
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_SYS);
/* Set Ethernet Address on controller */
outb_el1(dep, EL1_CSR, ECSR_LOOP); /* Loopback mode */
for (ix = EL1_ADDRESS; ix < SA_ADDR_LEN; ix += 1)
outb_el1(dep, ix, StationAddress[ix]);
lock();
/* Enable DMA/Interrupt, gain control of Buffer */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_SYS);
/* Clear RX packet area */
outw_el1(dep, EL1_RECVPTR, 0);
/* Enable transmit/receive configuration and flush pending interrupts */
outb_el1(dep, EL1_XMIT, EXSR_IDLE | EXSR_16JAM | EXSR_JAM | EXSR_UNDER);
outb_el1(dep, EL1_RECV, dep->de_recv_mode);
inb_el1(dep, EL1_RECV);
inb_el1(dep, EL1_XMIT);
dep->de_flags &= NOT(DEF_XMIT_BUSY);
unlock();
return; /* Done */
}
/*
** Name: void el1_dumpstats(dpeth_t *dep, int port, vir_bytes size)
** Function: Dumps counter on screen (support for console display).
*/
static void el1_dumpstats(dpeth_t * dep)
{
return;
}
/*
** Name: void el1_mode_init(dpeth_t *dep)
** Function: Initializes receicer mode
*/
static void el1_mode_init(dpeth_t * dep)
{
if (dep->de_flags & DEF_BROAD) {
dep->de_recv_mode = ERSR_BROAD | ERSR_RMASK;
} else if (dep->de_flags & DEF_PROMISC) {
dep->de_recv_mode = ERSR_ALL | ERSR_RMASK;
} else if (dep->de_flags & DEF_MULTI) {
dep->de_recv_mode = ERSR_MULTI | ERSR_RMASK;
} else {
dep->de_recv_mode = ERSR_NONE | ERSR_RMASK;
}
outb_el1(dep, EL1_RECV, dep->de_recv_mode);
inb_el1(dep, EL1_RECV);
return;
}
/*
** Name: void el1_recv(dpeth_t *dep, int from, int size)
** Function: Receive function. Called from interrupt handler to
** unload recv. buffer or from main (packet to client)
*/
static void el1_recv(dpeth_t * dep, int from, int size)
{
buff_t *rxptr;
while ((dep->de_flags & DEF_READING) && (rxptr = dep->de_recvq_head)) {
/* Remove buffer from queue and free buffer */
lock();
if (dep->de_recvq_tail == dep->de_recvq_head)
dep->de_recvq_head = dep->de_recvq_tail = NULL;
else
dep->de_recvq_head = rxptr->next;
unlock();
/* Copy buffer to user area */
mem2user(dep, rxptr);
/* Reply information */
dep->de_read_s = rxptr->size;
dep->de_flags |= DEF_ACK_RECV;
dep->de_flags &= NOT(DEF_READING);
/* Return buffer to the idle pool */
free_buff(dep, rxptr);
}
return;
}
/*
** Name: void el1_send(dpeth_t *dep, int from_int, int pktsize)
** Function: Send function. Called from main to transit a packet or
** from interrupt handler when a new packet was queued.
*/
static void el1_send(dpeth_t * dep, int from_int, int pktsize)
{
buff_t *txbuff;
clock_t now;
if (from_int == FALSE) {
if ((txbuff = alloc_buff(dep, pktsize + sizeof(buff_t))) != NULL) {
/* Fill transmit buffer from user area */
txbuff->next = NULL;
txbuff->size = pktsize;
txbuff->client = dep->de_client;
user2mem(dep, txbuff);
} else
panic("out of memory for Tx");
} else if ((txbuff = dep->de_xmitq_head) != NULL) {
/* Get first packet in queue */
lock();
if (dep->de_xmitq_tail == dep->de_xmitq_head)
dep->de_xmitq_head = dep->de_xmitq_tail = NULL;
else
dep->de_xmitq_head = txbuff->next;
unlock();
pktsize = txbuff->size;
} else
panic("should not be sending ");
if ((dep->de_flags & DEF_XMIT_BUSY)) {
if (from_int) panic("should not be sending ");
getuptime(&now);
if ((now - dep->de_xmit_start) > 4) {
/* Transmitter timed out */
DEBUG(printf("3c501: transmitter timed out ... \n"));
dep->de_stat.ets_sendErr += 1;
dep->de_flags &= NOT(DEF_XMIT_BUSY);
el1_reset(dep);
}
/* Queue packet */
lock(); /* Queue packet to receive queue */
if (dep->de_xmitq_head == NULL)
dep->de_xmitq_head = txbuff;
else
dep->de_xmitq_tail->next = txbuff;
dep->de_xmitq_tail = txbuff;
unlock();
} else {
/* Save for retransmission */
TxBuff = txbuff;
dep->de_flags |= (DEF_XMIT_BUSY | DEF_ACK_SEND);
/* Setup board for packet loading */
lock(); /* Buffer to processor */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_SYS);
inb_el1(dep, EL1_RECV); /* Clears any spurious interrupt */
inb_el1(dep, EL1_XMIT);
outw_el1(dep, EL1_RECVPTR, 0); /* Clears RX packet area */
/* Loads packet */
outw_el1(dep, EL1_XMITPTR, (EL1_BFRSIZ - pktsize));
outsb(dep->de_data_port, SELF, txbuff->buffer, pktsize);
/* Starts transmitter */
outw_el1(dep, EL1_XMITPTR, (EL1_BFRSIZ - pktsize));
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_XMIT); /* There it goes... */
unlock();
getuptime(&dep->de_xmit_start);
dep->de_flags &= NOT(DEF_SENDING);
}
return;
}
/*
** Name: void el1_stop(dpeth_t *dep)
** Function: Stops board and disable interrupts.
*/
static void el1_stop(dpeth_t * dep)
{
int ix;
DEBUG(printf("%s: stopping Etherlink ....\n", dep->de_name));
for (ix = 0; ix < 8; ix += 1) /* Reset board */
outb_el1(dep, EL1_CSR, ECSR_RESET);
outb_el1(dep, EL1_CSR, ECSR_SYS);
sys_irqdisable(&dep->de_hook); /* Disable interrupt */
return;
}
/*
** Name: void el1_interrupt(dpeth_t *dep)
** Function: Interrupt handler. Acknwledges transmit interrupts
** or unloads receive buffer to memory queue.
*/
static void el1_interrupt(dpeth_t * dep)
{
u16_t csr, isr;
int pktsize;
buff_t *rxptr;
csr = inb_el1(dep, EL1_CSR);
if ((csr & ECSR_XMIT) && (dep->de_flags & DEF_XMIT_BUSY)) {
/* Got a transmit interrupt */
isr = inb_el1(dep, EL1_XMIT);
if ((isr & (EXSR_16JAM | EXSR_UNDER | EXSR_JAM)) || !(isr & EXSR_IDLE)) {
DEBUG(printf("3c501: got xmit interrupt (ASR=0x%02X XSR=0x%02X)\n", csr, isr));
if (isr & EXSR_JAM) {
/* Sending, packet got a collision */
dep->de_stat.ets_collision += 1;
/* Put pointer back to beginning of packet */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_SYS);
outw_el1(dep, EL1_XMITPTR, (EL1_BFRSIZ - TxBuff->size));
/* And retrigger transmission */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_XMIT);
return;
} else if ((isr & EXSR_16JAM) || !(isr & EXSR_IDLE)) {
dep->de_stat.ets_sendErr += 1;
} else if (isr & EXSR_UNDER) {
dep->de_stat.ets_fifoUnder += 1;
}
DEBUG(printf("3c501: got xmit interrupt (0x%02X)\n", isr));
el1_reset(dep);
} else {
/** if (inw_el1(dep, EL1_XMITPTR) == EL1_BFRSIZ) **/
/* Packet transmitted successfully */
dep->de_stat.ets_packetT += 1;
dep->bytes_Tx += (long) (TxBuff->size);
free_buff(dep, TxBuff);
dep->de_flags &= NOT(DEF_XMIT_BUSY);
if ((dep->de_flags & DEF_SENDING) && dep->de_xmitq_head) {
/* Pending transmit request available in queue */
el1_send(dep, TRUE, 0);
if (dep->de_flags & (DEF_XMIT_BUSY | DEF_ACK_SEND))
return;
}
}
} else if ((csr & (ECSR_RECV | ECSR_XMTBSY)) == (ECSR_RECV | ECSR_XMTBSY)) {
/* Got a receive interrupt */
isr = inb_el1(dep, EL1_RECV);
pktsize = inw_el1(dep, EL1_RECVPTR);
if ((isr & ERSR_RERROR) || (isr & ERSR_STALE)) {
DEBUG(printf("Rx0 (ASR=0x%02X RSR=0x%02X size=%d)\n", csr, isr, pktsize));
dep->de_stat.ets_recvErr += 1;
} else if (pktsize < ETH_MIN_PACK_SIZE || pktsize > ETH_MAX_PACK_SIZE) {
DEBUG(printf("Rx1 (ASR=0x%02X RSR=0x%02X size=%d)\n", csr, isr, pktsize));
dep->de_stat.ets_recvErr += 1;
} else if ((rxptr = alloc_buff(dep, pktsize + sizeof(buff_t))) == NULL) {
/* Memory not available. Drop packet */
dep->de_stat.ets_fifoOver += 1;
} else if (isr & (ERSR_GOOD | ERSR_ANY)) {
/* Got a good packet. Read it from buffer */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_SYS);
outw_el1(dep, EL1_XMITPTR, 0);
insb(dep->de_data_port, SELF, rxptr->buffer, pktsize);
rxptr->next = NULL;
rxptr->size = pktsize;
dep->de_stat.ets_packetR += 1;
dep->bytes_Rx += (long) pktsize;
lock(); /* Queue packet to receive queue */
if (dep->de_recvq_head == NULL)
dep->de_recvq_head = rxptr;
else
dep->de_recvq_tail->next = rxptr;
dep->de_recvq_tail = rxptr;
unlock();
/* Reply to pending Receive requests, if any */
el1_recv(dep, TRUE, 0);
}
} else { /* Nasty condition, should never happen */
DEBUG(
printf("3c501: got interrupt with status 0x%02X\n"
" de_flags=0x%04X XSR=0x%02X RSR=0x%02X \n"
" xmit buffer = 0x%4X recv buffer = 0x%4X\n",
csr, dep->de_flags,
inb_el1(dep, EL1_RECV),
inb_el1(dep, EL1_XMIT),
inw_el1(dep, EL1_XMITPTR),
inw_el1(dep, EL1_RECVPTR))
);
el1_reset(dep);
}
/* Move into receive mode */
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_RECV);
outw_el1(dep, EL1_RECVPTR, 0);
/* Be sure that interrupts are cleared */
inb_el1(dep, EL1_RECV);
inb_el1(dep, EL1_XMIT);
return;
}
/*
** Name: void el1_init(dpeth_t *dep)
** Function: Initalizes board hardware and driver data structures.
*/
static void el1_init(dpeth_t * dep)
{
int ix;
dep->de_irq &= NOT(DEI_DEFAULT); /* Strip the default flag. */
dep->de_offset_page = 0;
dep->de_data_port = dep->de_base_port + EL1_DATAPORT;
el1_reset(dep); /* Reset and initialize board */
/* Start receiver (default mode) */
outw_el1(dep, EL1_RECVPTR, 0);
outb_el1(dep, EL1_CSR, ECSR_RIDE | ECSR_RECV);
/* Initializes buffer pool */
init_buff(dep, NULL);
el1_mode_init(dep);
printf("%s: Etherlink (%s) at %X:%d - ",
dep->de_name, "3c501", dep->de_base_port, dep->de_irq);
for (ix = 0; ix < SA_ADDR_LEN; ix += 1)
printf("%02X%c", (dep->de_address.ea_addr[ix] = StationAddress[ix]),
ix < SA_ADDR_LEN - 1 ? ':' : '\n');
/* Device specific functions */
dep->de_recvf = el1_recv;
dep->de_sendf = el1_send;
dep->de_flagsf = el1_mode_init;
dep->de_resetf = el1_reset;
dep->de_getstatsf = el1_getstats;
dep->de_dumpstatsf = el1_dumpstats;
dep->de_interruptf = el1_interrupt;
return; /* Done */
}
/*
** Name: int el1_probe(dpeth_t *dep)
** Function: Checks for presence of the board.
*/
PUBLIC int el1_probe(dpeth_t * dep)
{
int ix;
for (ix = 0; ix < 8; ix += 1) /* Reset the board */
outb_el1(dep, EL1_CSR, ECSR_RESET);
outb_el1(dep, EL1_CSR, ECSR_SYS); /* Leaves buffer to system */
/* Check station address */
for (ix = 0; ix < SA_ADDR_LEN; ix += 1) {
outw_el1(dep, EL1_XMITPTR, ix);
StationAddress[ix] = inb_el1(dep, EL1_SAPROM);
}
if (StationAddress[0] != 0x02 || /* Etherlink Station address */
StationAddress[1] != 0x60 || /* MUST be 02:60:8c:xx:xx:xx */
StationAddress[2] != 0x8C)
return FALSE; /* No Etherlink board at this address */
dep->de_ramsize = 0; /* RAM size is meaningless */
dep->de_linmem = 0L; /* Access is via I/O port */
/* Device specific functions */
dep->de_initf = el1_init;
dep->de_stopf = el1_stop;
return TRUE; /* Etherlink board found */
}
#endif /* ENABLE_3C501 */
/** 3c501.c **/