b01e9ebfdb
.Split TTY in order to support both x86 and ARM. .Add support for the TI 16750 UARTs on OMAP35x. .Various other improvements: .Kernel messages are printed using generic terminal write functions. That is, they are no longer directly displayed on the console. .The console can now be displayed on any terminal. This is configured by the "console={tty00,tty01,ttyc2,ttyc3,ttyc4}" boot variable -- basically any valid /dev/tty* terminal. .Cutify kernel messages with colors. Configured by "kernelclr={1,2,3,4,5,6,7}" boot variable.
1315 lines
36 KiB
C
1315 lines
36 KiB
C
/* Keyboard driver for PC's and AT's.
|
|
*
|
|
* Changes:
|
|
* Jul 13, 2004 processes can observe function keys (Jorrit N. Herder)
|
|
* Jun 15, 2004 removed wreboot(), except panic dumps (Jorrit N. Herder)
|
|
* Feb 04, 1994 loadable keymaps (Marcus Hampel)
|
|
*/
|
|
|
|
#include <minix/drivers.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/kbdio.h>
|
|
#include <sys/time.h>
|
|
#include <sys/select.h>
|
|
#include <termios.h>
|
|
#include <signal.h>
|
|
#include <unistd.h>
|
|
#include <machine/archtypes.h>
|
|
#include <minix/callnr.h>
|
|
#include <minix/com.h>
|
|
#include <minix/input.h>
|
|
#include <minix/keymap.h>
|
|
#include "tty.h"
|
|
#include "kernel/const.h"
|
|
#include "kernel/config.h"
|
|
#include "kernel/type.h"
|
|
#include "kernel/proc.h"
|
|
|
|
static u16_t keymap[NR_SCAN_CODES * MAP_COLS] = {
|
|
#include "keymaps/us-std.src"
|
|
};
|
|
|
|
static u16_t keymap_escaped[NR_SCAN_CODES * MAP_COLS] = {
|
|
#include "keymaps/us-std-esc.src"
|
|
};
|
|
|
|
static int irq_hook_id = -1;
|
|
static int aux_irq_hook_id = -1;
|
|
|
|
/* Standard and AT keyboard. (PS/2 MCA implies AT throughout.) */
|
|
#define KEYBD 0x60 /* I/O port for keyboard data */
|
|
|
|
/* AT keyboard. */
|
|
#define KB_COMMAND 0x64 /* I/O port for commands on AT */
|
|
#define KB_STATUS 0x64 /* I/O port for status on AT */
|
|
#define KB_ACK 0xFA /* keyboard ack response */
|
|
#define KB_AUX_BYTE 0x20 /* Auxiliary Device Output Buffer Full */
|
|
#define KB_OUT_FULL 0x01 /* status bit set when keypress char pending */
|
|
#define KB_IN_FULL 0x02 /* status bit set when not ready to receive */
|
|
#define KBC_RD_RAM_CCB 0x20 /* Read controller command byte */
|
|
#define KBC_WR_RAM_CCB 0x60 /* Write controller command byte */
|
|
#define KBC_DI_AUX 0xA7 /* Disable Auxiliary Device */
|
|
#define KBC_EN_AUX 0xA8 /* Enable Auxiliary Device */
|
|
#define KBC_DI_KBD 0xAD /* Disable Keybard Interface */
|
|
#define KBC_EN_KBD 0xAE /* Enable Keybard Interface */
|
|
#define KBC_WRITE_AUX 0xD4 /* Write to Auxiliary Device */
|
|
#define LED_CODE 0xED /* command to keyboard to set LEDs */
|
|
#define MAX_KB_ACK_RETRIES 0x1000 /* max #times to wait for kb ack */
|
|
#define MAX_KB_BUSY_RETRIES 0x1000 /* max #times to loop while kb busy */
|
|
#define KBIT 0x80 /* bit used to ack characters to keyboard */
|
|
|
|
#define KBC_IN_DELAY 7 /* wait 7 microseconds when polling */
|
|
|
|
/* Miscellaneous. */
|
|
#define ESC_SCAN 0x01 /* reboot key when panicking */
|
|
#define SLASH_SCAN 0x35 /* to recognize numeric slash */
|
|
#define RSHIFT_SCAN 0x36 /* to distinguish left and right shift */
|
|
#define HOME_SCAN 0x47 /* first key on the numeric keypad */
|
|
#define INS_SCAN 0x52 /* INS for use in CTRL-ALT-INS reboot */
|
|
#define DEL_SCAN 0x53 /* DEL for use in CTRL-ALT-DEL reboot */
|
|
|
|
#define KBD_BUFSZ 1024 /* Buffer size for raw scan codes */
|
|
#define KBD_OUT_BUFSZ 16 /* Output buffer to sending data to the
|
|
* keyboard.
|
|
*/
|
|
|
|
#define CONSOLE 0 /* line number for console */
|
|
#define KB_IN_BYTES 32 /* size of keyboard input buffer */
|
|
|
|
static char injbuf[KB_IN_BYTES];
|
|
static char *injhead = injbuf;
|
|
static char *injtail = injbuf;
|
|
static int injcount;
|
|
|
|
static char ibuf[KB_IN_BYTES]; /* input buffer */
|
|
static char *ihead = ibuf; /* next free spot in input buffer */
|
|
static char *itail = ibuf; /* scan code to return to TTY */
|
|
static int icount; /* # codes in buffer */
|
|
|
|
static int esc; /* escape scan code detected? */
|
|
static int alt_l; /* left alt key state */
|
|
static int alt_r; /* right alt key state */
|
|
static int alt; /* either alt key */
|
|
static int ctrl_l; /* left control key state */
|
|
static int ctrl_r; /* right control key state */
|
|
static int ctrl; /* either control key */
|
|
static int shift_l; /* left shift key state */
|
|
static int shift_r; /* right shift key state */
|
|
static int shift; /* either shift key */
|
|
static int num_down; /* num lock key depressed */
|
|
static int caps_down; /* caps lock key depressed */
|
|
static int scroll_down; /* scroll lock key depressed */
|
|
static int alt_down; /* alt key depressed */
|
|
static int locks[NR_CONS]; /* per console lock keys state */
|
|
|
|
/* Lock key active bits. Chosen to be equal to the keyboard LED bits. */
|
|
#define SCROLL_LOCK 0x01
|
|
#define NUM_LOCK 0x02
|
|
#define CAPS_LOCK 0x04
|
|
#define ALT_LOCK 0x08
|
|
|
|
static char numpad_map[12] =
|
|
{'H', 'Y', 'A', 'B', 'D', 'C', 'V', 'U', 'G', 'S', 'T', '@'};
|
|
|
|
static char *fkey_map[12] =
|
|
{"11", "12", "13", "14", "15", "17", /* F1-F6 */
|
|
"18", "19", "20", "21", "23", "24"}; /* F7-F12 */
|
|
|
|
/* Variables and definition for observed function keys. */
|
|
typedef struct observer { int proc_nr; int events; } obs_t;
|
|
static obs_t fkey_obs[12]; /* observers for F1-F12 */
|
|
static obs_t sfkey_obs[12]; /* observers for SHIFT F1-F12 */
|
|
|
|
static struct kbd
|
|
{
|
|
int minor;
|
|
int nr_open;
|
|
char buf[KBD_BUFSZ];
|
|
int offset;
|
|
int avail;
|
|
int req_size;
|
|
int req_proc;
|
|
cp_grant_id_t req_grant;
|
|
vir_bytes req_addr_offset;
|
|
int incaller;
|
|
int select_ops;
|
|
int select_proc;
|
|
} kbd, kbdaux;
|
|
|
|
/* Data that is to be sent to the keyboard. Each byte is ACKed by the
|
|
* keyboard.
|
|
*/
|
|
static struct kbd_outack
|
|
{
|
|
unsigned char buf[KBD_OUT_BUFSZ];
|
|
int offset;
|
|
int avail;
|
|
int expect_ack;
|
|
} kbdout;
|
|
|
|
static int kbd_watchdog_set= 0;
|
|
static int kbd_alive= 1;
|
|
static long sticky_alt_mode = 0;
|
|
static long debug_fkeys = 1;
|
|
static timer_t tmr_kbd_wd;
|
|
|
|
static void handle_req(struct kbd *kbdp, message *m);
|
|
static int handle_status(struct kbd *kbdp, message *m);
|
|
static void kbc_cmd0(int cmd);
|
|
static void kbc_cmd1(int cmd, int data);
|
|
static int kbc_read(void);
|
|
static void kbd_send(void);
|
|
static int kb_ack(void);
|
|
static int kb_wait(void);
|
|
static int func_key(int scode);
|
|
static int scan_keyboard(unsigned char *bp, int *isauxp);
|
|
static unsigned make_break(int scode);
|
|
static void set_leds(void);
|
|
static void show_key_mappings(void);
|
|
static int kb_read(struct tty *tp, int try);
|
|
static unsigned map_key(int scode);
|
|
static void kbd_watchdog(timer_t *tmrp);
|
|
|
|
int micro_delay(u32_t usecs)
|
|
{
|
|
/* TTY can't use the library micro_delay() as that calls PM. */
|
|
tickdelay(micros_to_ticks(usecs));
|
|
return OK;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_kbd *
|
|
*===========================================================================*/
|
|
void do_kbd(message *m)
|
|
{
|
|
handle_req(&kbd, m);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* kbd_status *
|
|
*===========================================================================*/
|
|
int kbd_status(message *m)
|
|
{
|
|
int r;
|
|
|
|
r= handle_status(&kbd, m);
|
|
if (r)
|
|
return r;
|
|
return handle_status(&kbdaux, m);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* do_kbdaux *
|
|
*===========================================================================*/
|
|
void do_kbdaux(message *m)
|
|
{
|
|
handle_req(&kbdaux, m);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* handle_req *
|
|
*===========================================================================*/
|
|
static void handle_req(kbdp, m)
|
|
struct kbd *kbdp;
|
|
message *m;
|
|
{
|
|
int i, n, r, ops, watch;
|
|
unsigned char c;
|
|
|
|
/* Execute the requested device driver function. */
|
|
r= EINVAL; /* just in case */
|
|
switch (m->m_type) {
|
|
case DEV_OPEN:
|
|
kbdp->nr_open++;
|
|
r= OK;
|
|
break;
|
|
case DEV_CLOSE:
|
|
kbdp->nr_open--;
|
|
if (kbdp->nr_open < 0)
|
|
{
|
|
printf("TTY(kbd): open count is negative\n");
|
|
kbdp->nr_open= 0;
|
|
}
|
|
if (kbdp->nr_open == 0)
|
|
kbdp->avail= 0;
|
|
r= OK;
|
|
break;
|
|
case DEV_READ_S:
|
|
if (kbdp->req_size)
|
|
{
|
|
/* We handle only request at a time */
|
|
r= EIO;
|
|
break;
|
|
}
|
|
if (kbdp->avail == 0)
|
|
{
|
|
/* Should record proc */
|
|
kbdp->req_size= m->COUNT;
|
|
kbdp->req_proc= m->USER_ENDPT;
|
|
kbdp->req_grant= (cp_grant_id_t) m->IO_GRANT;
|
|
kbdp->req_addr_offset= 0;
|
|
kbdp->incaller= m->m_source;
|
|
r= SUSPEND;
|
|
break;
|
|
}
|
|
|
|
/* Handle read request */
|
|
n= kbdp->avail;
|
|
if (n > m->COUNT)
|
|
n= m->COUNT;
|
|
if (kbdp->offset + n > KBD_BUFSZ)
|
|
n= KBD_BUFSZ-kbdp->offset;
|
|
if (n <= 0)
|
|
panic("do_kbd(READ): bad n: %d", n);
|
|
r= sys_safecopyto(m->m_source, (cp_grant_id_t) m->IO_GRANT, 0,
|
|
(vir_bytes) &kbdp->buf[kbdp->offset], n);
|
|
if (r == OK)
|
|
{
|
|
kbdp->offset= (kbdp->offset+n) % KBD_BUFSZ;
|
|
kbdp->avail -= n;
|
|
r= n;
|
|
} else {
|
|
printf("copy in read kbd failed: %d\n", r);
|
|
}
|
|
|
|
break;
|
|
|
|
case DEV_WRITE_S:
|
|
if (kbdp != &kbdaux)
|
|
{
|
|
printf("write to keyboard not implemented\n");
|
|
r= EINVAL;
|
|
break;
|
|
}
|
|
|
|
/* Assume that output to AUX only happens during
|
|
* initialization and we can afford to lose input. This should
|
|
* be fixed at a later time.
|
|
*/
|
|
for (i= 0; i<m->COUNT; i++)
|
|
{
|
|
r= sys_safecopyfrom(m->m_source, (cp_grant_id_t)
|
|
m->IO_GRANT, i, (vir_bytes) &c, 1);
|
|
if (r != OK)
|
|
break;
|
|
kbc_cmd1(KBC_WRITE_AUX, c);
|
|
}
|
|
r= i;
|
|
break;
|
|
|
|
case CANCEL:
|
|
kbdp->req_size= 0;
|
|
r= OK;
|
|
break;
|
|
case DEV_SELECT:
|
|
ops = m->USER_ENDPT & (SEL_RD|SEL_WR|SEL_ERR);
|
|
watch = (m->USER_ENDPT & SEL_NOTIFY) ? 1 : 0;
|
|
|
|
r= 0;
|
|
if (kbdp->avail && (ops & SEL_RD))
|
|
{
|
|
r |= SEL_RD;
|
|
break;
|
|
}
|
|
|
|
if (ops && watch)
|
|
{
|
|
kbdp->select_ops |= ops;
|
|
kbdp->select_proc= m->m_source;
|
|
}
|
|
break;
|
|
case DEV_IOCTL_S:
|
|
if (kbdp == &kbd && m->TTY_REQUEST == KIOCSLEDS)
|
|
{
|
|
kio_leds_t leds;
|
|
unsigned char b;
|
|
|
|
|
|
r= sys_safecopyfrom(m->m_source, (cp_grant_id_t)
|
|
m->IO_GRANT, 0, (vir_bytes) &leds,
|
|
sizeof(leds));
|
|
if (r != OK)
|
|
break;
|
|
b= 0;
|
|
if (leds.kl_bits & KBD_LEDS_NUM) b |= NUM_LOCK;
|
|
if (leds.kl_bits & KBD_LEDS_CAPS) b |= CAPS_LOCK;
|
|
if (leds.kl_bits & KBD_LEDS_SCROLL) b |= SCROLL_LOCK;
|
|
if (kbdout.avail == 0)
|
|
kbdout.offset= 0;
|
|
if (kbdout.offset + kbdout.avail + 2 > KBD_OUT_BUFSZ)
|
|
{
|
|
/* Output buffer is full. Ignore this command.
|
|
* Reset ACK flag.
|
|
*/
|
|
kbdout.expect_ack= 0;
|
|
}
|
|
else
|
|
{
|
|
kbdout.buf[kbdout.offset+kbdout.avail]=
|
|
LED_CODE;
|
|
kbdout.buf[kbdout.offset+kbdout.avail+1]= b;
|
|
kbdout.avail += 2;
|
|
}
|
|
if (!kbdout.expect_ack)
|
|
kbd_send();
|
|
r= OK;
|
|
break;
|
|
}
|
|
if (kbdp == &kbd && m->TTY_REQUEST == KIOCBELL)
|
|
{
|
|
kio_bell_t bell;
|
|
clock_t ticks;
|
|
|
|
r = sys_safecopyfrom(m->m_source, (cp_grant_id_t)
|
|
m->IO_GRANT, 0, (vir_bytes) &bell,
|
|
sizeof(bell));
|
|
if (r != OK)
|
|
break;
|
|
|
|
ticks= bell.kb_duration.tv_usec * system_hz / 1000000;
|
|
ticks += bell.kb_duration.tv_sec * system_hz;
|
|
if (!ticks)
|
|
ticks++;
|
|
beep_x(bell.kb_pitch, ticks);
|
|
|
|
r= OK;
|
|
break;
|
|
}
|
|
r= ENOTTY;
|
|
break;
|
|
|
|
default:
|
|
printf("Warning, TTY(kbd) got unexpected request %d from %d\n",
|
|
m->m_type, m->m_source);
|
|
r= EINVAL;
|
|
}
|
|
tty_reply(TASK_REPLY, m->m_source, m->USER_ENDPT, r);
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* handle_status *
|
|
*===========================================================================*/
|
|
static int handle_status(kbdp, m)
|
|
struct kbd *kbdp;
|
|
message *m;
|
|
{
|
|
int n, r;
|
|
|
|
if (kbdp->avail && kbdp->req_size && m->m_source == kbdp->incaller &&
|
|
kbdp->req_grant != GRANT_INVALID)
|
|
{
|
|
/* Handle read request */
|
|
n= kbdp->avail;
|
|
if (n > kbdp->req_size)
|
|
n= kbdp->req_size;
|
|
if (kbdp->offset + n > KBD_BUFSZ)
|
|
n= KBD_BUFSZ-kbdp->offset;
|
|
if (n <= 0)
|
|
panic("kbd_status: bad n: %d", n);
|
|
kbdp->req_size= 0;
|
|
r= sys_safecopyto(kbdp->incaller, kbdp->req_grant, 0,
|
|
(vir_bytes)&kbdp->buf[kbdp->offset], n);
|
|
if (r == OK)
|
|
{
|
|
kbdp->offset= (kbdp->offset+n) % KBD_BUFSZ;
|
|
kbdp->avail -= n;
|
|
r= n;
|
|
} else printf("copy in revive kbd failed: %d\n", r);
|
|
|
|
m->m_type = DEV_REVIVE;
|
|
m->REP_ENDPT= kbdp->req_proc;
|
|
m->REP_IO_GRANT= kbdp->req_grant;
|
|
m->REP_STATUS= r;
|
|
kbdp->req_grant = GRANT_INVALID;
|
|
return 1;
|
|
}
|
|
if (kbdp->avail && (kbdp->select_ops & SEL_RD) &&
|
|
m->m_source == kbdp->select_proc)
|
|
{
|
|
m->m_type = DEV_IO_READY;
|
|
m->DEV_MINOR = kbdp->minor;
|
|
m->DEV_SEL_OPS = SEL_RD;
|
|
|
|
kbdp->select_ops &= ~SEL_RD;
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* map_key *
|
|
*===========================================================================*/
|
|
static unsigned map_key(scode)
|
|
int scode;
|
|
{
|
|
/* Map a scan code to an ASCII code. */
|
|
|
|
int caps, column, lk;
|
|
u16_t *keyrow;
|
|
|
|
if(esc)
|
|
keyrow = &keymap_escaped[scode * MAP_COLS];
|
|
else
|
|
keyrow = &keymap[scode * MAP_COLS];
|
|
|
|
caps = shift;
|
|
lk = locks[ccurrent];
|
|
if ((lk & NUM_LOCK) && HOME_SCAN <= scode && scode <= DEL_SCAN) caps = !caps;
|
|
if ((lk & CAPS_LOCK) && (keyrow[0] & HASCAPS)) caps = !caps;
|
|
|
|
if (alt) {
|
|
column = 2;
|
|
if (ctrl || alt_r) column = 3; /* Ctrl + Alt == AltGr */
|
|
if (caps) column = 4;
|
|
} else {
|
|
if (sticky_alt_mode && (lk & ALT_LOCK)) {
|
|
column = 2;
|
|
if (caps) column = 4;
|
|
} else {
|
|
column = 0;
|
|
if (caps) column = 1;
|
|
if (ctrl) column = 5;
|
|
}
|
|
}
|
|
return keyrow[column] & ~HASCAPS;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbd_interrupt *
|
|
*===========================================================================*/
|
|
void kbd_interrupt(message *UNUSED(m_ptr))
|
|
{
|
|
/* A keyboard interrupt has occurred. Process it. */
|
|
int o, isaux;
|
|
unsigned char scode;
|
|
struct kbd *kbdp;
|
|
|
|
/* Fetch the character from the keyboard hardware and acknowledge it. */
|
|
if (!scan_keyboard(&scode, &isaux))
|
|
return;
|
|
|
|
if (isaux)
|
|
kbdp= &kbdaux;
|
|
else if (kbd.nr_open)
|
|
kbdp= &kbd;
|
|
else
|
|
kbdp= NULL;
|
|
|
|
if (kbdp)
|
|
{
|
|
/* raw scan codes or aux data */
|
|
if (kbdp->avail >= KBD_BUFSZ)
|
|
{
|
|
#if 0
|
|
printf("kbd_interrupt: %s buffer is full\n",
|
|
isaux ? "kbdaux" : "keyboard");
|
|
#endif
|
|
return; /* Buffer is full */
|
|
}
|
|
o= (kbdp->offset + kbdp->avail) % KBD_BUFSZ;
|
|
kbdp->buf[o]= scode;
|
|
kbdp->avail++;
|
|
if (kbdp->req_size) {
|
|
notify(kbdp->incaller);
|
|
}
|
|
if (kbdp->select_ops & SEL_RD)
|
|
notify(kbdp->select_proc);
|
|
return;
|
|
}
|
|
|
|
/* Store the scancode in memory so the task can get at it later. */
|
|
if (icount < KB_IN_BYTES) {
|
|
*ihead++ = scode;
|
|
if (ihead == ibuf + KB_IN_BYTES) ihead = ibuf;
|
|
icount++;
|
|
tty_table[ccurrent].tty_events = 1;
|
|
if (tty_table[ccurrent].tty_select_ops & SEL_RD) {
|
|
select_retry(&tty_table[ccurrent]);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void do_kb_inject(message *msg)
|
|
{
|
|
unsigned char scode;
|
|
/* only handle keyboard events */
|
|
if (msg->INPUT_TYPE == INPUT_EV_KEY) {
|
|
scode = msg->INPUT_CODE;
|
|
|
|
/* is it a KEY RELEASE? */
|
|
if (msg->INPUT_VALUE == 0) {
|
|
scode |= KEY_RELEASE;
|
|
}
|
|
|
|
if (injcount < KB_IN_BYTES) {
|
|
*injhead++ = scode;
|
|
if (injhead == injbuf + KB_IN_BYTES) injhead = injbuf;
|
|
injcount++;
|
|
tty_table[ccurrent].tty_events = 1;
|
|
if (tty_table[ccurrent].tty_select_ops & SEL_RD) {
|
|
select_retry(&tty_table[ccurrent]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kb_read *
|
|
*===========================================================================*/
|
|
static int kb_read(tp, try)
|
|
tty_t *tp;
|
|
int try;
|
|
{
|
|
/* Process characters from the circular keyboard buffer. */
|
|
char buf[7], *p, suffix;
|
|
int scode;
|
|
unsigned ch;
|
|
|
|
/* always use the current console */
|
|
tp = &tty_table[ccurrent];
|
|
|
|
if (try) {
|
|
if (icount > 0) return 1;
|
|
return 0;
|
|
}
|
|
|
|
while (icount > 0 || injcount > 0) {
|
|
if (injcount > 0) {
|
|
/* take one key scan code */
|
|
scode = *injtail++;
|
|
if (injtail == injbuf + KB_IN_BYTES) injtail = injbuf;
|
|
injcount--;
|
|
} else {
|
|
/* take one key scan code */
|
|
scode = *itail++;
|
|
if (itail == ibuf + KB_IN_BYTES) itail = ibuf;
|
|
icount--;
|
|
}
|
|
|
|
/* Function keys are being used for debug dumps (if enabled). */
|
|
if (debug_fkeys && func_key(scode)) continue;
|
|
|
|
/* Perform make/break processing. */
|
|
|
|
ch = make_break(scode);
|
|
|
|
if (ch <= 0xFF) {
|
|
/* A normal character. */
|
|
buf[0] = ch;
|
|
(void) in_process(tp, buf, 1, scode);
|
|
} else
|
|
if (HOME <= ch && ch <= INSRT) {
|
|
/* An ASCII escape sequence generated by the numeric pad. */
|
|
buf[0] = ESC;
|
|
buf[1] = '[';
|
|
buf[2] = numpad_map[ch - HOME];
|
|
(void) in_process(tp, buf, 3, scode);
|
|
} else
|
|
if ((F1 <= ch && ch <= F12) || (SF1 <= ch && ch <= SF12) ||
|
|
(CF1 <= ch && ch <= CF12 && !debug_fkeys)) {
|
|
/* An escape sequence generated by function keys. */
|
|
if (F1 <= ch && ch <= F12) {
|
|
ch -= F1;
|
|
suffix = 0;
|
|
} else
|
|
if (SF1 <= ch && ch <= SF12) {
|
|
ch -= SF1;
|
|
suffix = '2';
|
|
} else
|
|
/* (CF1 <= ch && ch <= CF12) */ {
|
|
ch -= CF1;
|
|
suffix = shift ? '6' : '5';
|
|
}
|
|
/* ^[[11~ for F1, ^[[24;5~ for CF12 etc */
|
|
buf[0] = ESC;
|
|
buf[1] = '[';
|
|
buf[2] = fkey_map[ch][0];
|
|
buf[3] = fkey_map[ch][1];
|
|
p = &buf[4];
|
|
if (suffix) {
|
|
*p++ = ';';
|
|
*p++ = suffix;
|
|
}
|
|
*p++ = '~';
|
|
(void) in_process(tp, buf, p - buf, scode);
|
|
} else
|
|
if (ch == ALEFT) {
|
|
/* Choose lower numbered console as current console. */
|
|
select_console(ccurrent - 1);
|
|
set_leds();
|
|
} else
|
|
if (ch == ARIGHT) {
|
|
/* Choose higher numbered console as current console. */
|
|
select_console(ccurrent + 1);
|
|
set_leds();
|
|
} else
|
|
if (AF1 <= ch && ch <= AF12) {
|
|
/* Alt-F1 is console, Alt-F2 is ttyc1, etc. */
|
|
select_console(ch - AF1);
|
|
set_leds();
|
|
} else
|
|
if (CF1 <= ch && ch <= CF12) {
|
|
switch(ch) {
|
|
case CF1: show_key_mappings(); break;
|
|
case CF3: toggle_scroll(); break; /* hardware <-> software */
|
|
case CF7: sigchar(&tty_table[CONSOLE], SIGQUIT, 1); break;
|
|
case CF8: sigchar(&tty_table[CONSOLE], SIGINT, 1); break;
|
|
case CF9: sigchar(&tty_table[CONSOLE], SIGKILL, 1); break;
|
|
}
|
|
} else {
|
|
/* pass on scancode even though there is no character code */
|
|
(void) in_process(tp, NULL, 0, scode);
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbd_send *
|
|
*===========================================================================*/
|
|
static void kbd_send()
|
|
{
|
|
u32_t sb;
|
|
int r;
|
|
|
|
if (!kbdout.avail)
|
|
return;
|
|
if (kbdout.expect_ack)
|
|
return;
|
|
|
|
if((r=sys_inb(KB_STATUS, &sb)) != OK) {
|
|
printf("kbd_send: 1 sys_inb() failed: %d\n", r);
|
|
}
|
|
if (sb & (KB_OUT_FULL|KB_IN_FULL))
|
|
{
|
|
printf("not sending 1: sb = 0x%x\n", sb);
|
|
return;
|
|
}
|
|
micro_delay(KBC_IN_DELAY);
|
|
if((r=sys_inb(KB_STATUS, &sb)) != OK) {
|
|
printf("kbd_send: 2 sys_inb() failed: %d\n", r);
|
|
}
|
|
if (sb & (KB_OUT_FULL|KB_IN_FULL))
|
|
{
|
|
printf("not sending 2: sb = 0x%x\n", sb);
|
|
return;
|
|
}
|
|
|
|
/* Okay, buffer is really empty */
|
|
#if 0
|
|
printf("sending byte 0x%x to keyboard\n", kbdout.buf[kbdout.offset]);
|
|
#endif
|
|
if((r=sys_outb(KEYBD, kbdout.buf[kbdout.offset])) != OK) {
|
|
printf("kbd_send: 3 sys_outb() failed: %d\n", r);
|
|
}
|
|
kbdout.offset++;
|
|
kbdout.avail--;
|
|
kbdout.expect_ack= 1;
|
|
|
|
kbd_alive= 1;
|
|
if (kbd_watchdog_set)
|
|
{
|
|
/* Set a watchdog timer for one second. */
|
|
set_timer(&tmr_kbd_wd, system_hz, kbd_watchdog, 0);
|
|
|
|
kbd_watchdog_set= 1;
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* make_break *
|
|
*===========================================================================*/
|
|
static unsigned make_break(scode)
|
|
int scode; /* scan code of key just struck or released */
|
|
{
|
|
/* This routine can handle keyboards that interrupt only on key depression,
|
|
* as well as keyboards that interrupt on key depression and key release.
|
|
* For efficiency, the interrupt routine filters out most key releases.
|
|
*/
|
|
int ch, make, escape;
|
|
static int CAD_count = 0;
|
|
static int rebooting = 0;
|
|
|
|
/* Check for CTRL-ALT-DEL, and if found, halt the computer. This would
|
|
* be better done in keyboard() in case TTY is hung, except control and
|
|
* alt are set in the high level code.
|
|
*/
|
|
if (ctrl && alt && (scode == DEL_SCAN || scode == INS_SCAN))
|
|
{
|
|
if (++CAD_count == 3) {
|
|
cons_stop();
|
|
sys_abort(RBT_DEFAULT);
|
|
}
|
|
sys_kill(INIT_PROC_NR, SIGABRT);
|
|
rebooting = 1;
|
|
}
|
|
|
|
if(rebooting)
|
|
return -1;
|
|
|
|
/* High-order bit set on key release. */
|
|
make = (scode & KEY_RELEASE) == 0; /* true if pressed */
|
|
|
|
ch = map_key(scode &= ASCII_MASK); /* map to ASCII */
|
|
|
|
escape = esc; /* Key is escaped? (true if added since the XT) */
|
|
esc = 0;
|
|
|
|
switch (ch) {
|
|
case CTRL: /* Left or right control key */
|
|
*(escape ? &ctrl_r : &ctrl_l) = make;
|
|
ctrl = ctrl_l | ctrl_r;
|
|
break;
|
|
case SHIFT: /* Left or right shift key */
|
|
*(scode == RSHIFT_SCAN ? &shift_r : &shift_l) = make;
|
|
shift = shift_l | shift_r;
|
|
break;
|
|
case ALT: /* Left or right alt key */
|
|
*(escape ? &alt_r : &alt_l) = make;
|
|
alt = alt_l | alt_r;
|
|
if (sticky_alt_mode && (alt_r && (alt_down < make))) {
|
|
locks[ccurrent] ^= ALT_LOCK;
|
|
}
|
|
alt_down = make;
|
|
break;
|
|
case CALOCK: /* Caps lock - toggle on 0 -> 1 transition */
|
|
if (caps_down < make) {
|
|
locks[ccurrent] ^= CAPS_LOCK;
|
|
set_leds();
|
|
}
|
|
caps_down = make;
|
|
break;
|
|
case NLOCK: /* Num lock */
|
|
if (num_down < make) {
|
|
locks[ccurrent] ^= NUM_LOCK;
|
|
set_leds();
|
|
}
|
|
num_down = make;
|
|
break;
|
|
case SLOCK: /* Scroll lock */
|
|
if (scroll_down < make) {
|
|
locks[ccurrent] ^= SCROLL_LOCK;
|
|
set_leds();
|
|
}
|
|
scroll_down = make;
|
|
break;
|
|
case EXTKEY: /* Escape keycode */
|
|
esc = 1; /* Next key is escaped */
|
|
return(-1);
|
|
default: /* A normal key */
|
|
if(!make)
|
|
return -1;
|
|
if(ch)
|
|
return ch;
|
|
{
|
|
static char seen[2][NR_SCAN_CODES];
|
|
int notseen = 0, ei;
|
|
ei = escape ? 1 : 0;
|
|
if(scode >= 0 && scode < NR_SCAN_CODES) {
|
|
notseen = !seen[ei][scode];
|
|
seen[ei][scode] = 1;
|
|
} else {
|
|
printf("tty: scode %d makes no sense\n", scode);
|
|
}
|
|
if(notseen) {
|
|
printf("tty: ignoring unrecognized %s "
|
|
"scancode 0x%x\n",
|
|
escape ? "escaped" : "straight", scode);
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* Key release, or a shift type key. */
|
|
return(-1);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* set_leds *
|
|
*===========================================================================*/
|
|
static void set_leds()
|
|
{
|
|
/* Set the LEDs on the caps, num, and scroll lock keys */
|
|
int s;
|
|
|
|
kb_wait(); /* wait for buffer empty */
|
|
if ((s=sys_outb(KEYBD, LED_CODE)) != OK)
|
|
printf("Warning, sys_outb couldn't prepare for LED values: %d\n", s);
|
|
/* prepare keyboard to accept LED values */
|
|
kb_ack(); /* wait for ack response */
|
|
|
|
kb_wait(); /* wait for buffer empty */
|
|
if ((s=sys_outb(KEYBD, locks[ccurrent])) != OK)
|
|
printf("Warning, sys_outb couldn't give LED values: %d\n", s);
|
|
/* give keyboard LED values */
|
|
kb_ack(); /* wait for ack response */
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbc_cmd0 *
|
|
*===========================================================================*/
|
|
static void kbc_cmd0(cmd)
|
|
int cmd;
|
|
{
|
|
kb_wait();
|
|
if(sys_outb(KB_COMMAND, cmd) != OK)
|
|
printf("kbc_cmd0: sys_outb failed\n");
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbc_cmd1 *
|
|
*===========================================================================*/
|
|
static void kbc_cmd1(cmd, data)
|
|
int cmd;
|
|
int data;
|
|
{
|
|
kb_wait();
|
|
if(sys_outb(KB_COMMAND, cmd) != OK)
|
|
printf("kbc_cmd1: 1 sys_outb failed\n");
|
|
kb_wait();
|
|
if(sys_outb(KEYBD, data) != OK)
|
|
printf("kbc_cmd1: 2 sys_outb failed\n");
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* kbc_read *
|
|
*===========================================================================*/
|
|
static int kbc_read()
|
|
{
|
|
int i;
|
|
u32_t byte, st;
|
|
#if 0
|
|
struct micro_state ms;
|
|
#endif
|
|
|
|
#if DEBUG
|
|
printf("in kbc_read\n");
|
|
#endif
|
|
|
|
/* Wait at most 1 second for a byte from the keyboard or
|
|
* the kbd controller, return -1 on a timeout.
|
|
*/
|
|
for (i= 0; i<1000000; i++)
|
|
#if 0
|
|
micro_start(&ms);
|
|
do
|
|
#endif
|
|
{
|
|
if(sys_inb(KB_STATUS, &st) != OK)
|
|
printf("kbc_read: 1 sys_inb failed\n");
|
|
if (st & KB_OUT_FULL)
|
|
{
|
|
micro_delay(KBC_IN_DELAY);
|
|
if(sys_inb(KEYBD, &byte) != OK)
|
|
printf("kbc_read: 2 sys_inb failed\n");
|
|
if (st & KB_AUX_BYTE)
|
|
printf("kbc_read: aux byte 0x%x\n", byte);
|
|
#if DEBUG
|
|
printf("keyboard`kbc_read: returning byte 0x%x\n",
|
|
byte);
|
|
#endif
|
|
return byte;
|
|
}
|
|
}
|
|
#if 0
|
|
while (micro_elapsed(&ms) < 1000000);
|
|
#endif
|
|
panic("kbc_read failed to complete");
|
|
return EINVAL;
|
|
}
|
|
|
|
|
|
/*===========================================================================*
|
|
* kb_wait *
|
|
*===========================================================================*/
|
|
static int kb_wait()
|
|
{
|
|
/* Wait until the controller is ready; return zero if this times out. */
|
|
|
|
int retries;
|
|
u32_t status;
|
|
int s, isaux;
|
|
unsigned char byte;
|
|
|
|
retries = MAX_KB_BUSY_RETRIES + 1; /* wait until not busy */
|
|
do {
|
|
s = sys_inb(KB_STATUS, &status);
|
|
if(s != OK)
|
|
printf("kb_wait: sys_inb failed: %d\n", s);
|
|
if (status & KB_OUT_FULL) {
|
|
if (scan_keyboard(&byte, &isaux))
|
|
{
|
|
#if 0
|
|
printf("ignoring %sbyte in kb_wait\n", isaux ? "AUX " : "");
|
|
#endif
|
|
}
|
|
}
|
|
if (! (status & (KB_IN_FULL|KB_OUT_FULL)) )
|
|
break; /* wait until ready */
|
|
} while (--retries != 0); /* continue unless timeout */
|
|
return(retries); /* zero on timeout, positive if ready */
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kb_ack *
|
|
*===========================================================================*/
|
|
static int kb_ack()
|
|
{
|
|
/* Wait until kbd acknowledges last command; return zero if this times out. */
|
|
|
|
int retries, s;
|
|
u32_t u8val;
|
|
|
|
retries = MAX_KB_ACK_RETRIES + 1;
|
|
do {
|
|
s = sys_inb(KEYBD, &u8val);
|
|
if(s != OK)
|
|
printf("kb_ack: sys_inb failed: %d\n", s);
|
|
if (u8val == KB_ACK)
|
|
break; /* wait for ack */
|
|
} while(--retries != 0); /* continue unless timeout */
|
|
|
|
return(retries); /* nonzero if ack received */
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kb_init *
|
|
*===========================================================================*/
|
|
void kb_init(tp)
|
|
tty_t *tp;
|
|
{
|
|
/* Initialize the keyboard driver. */
|
|
|
|
tp->tty_devread = kb_read; /* input function */
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kb_init_once *
|
|
*===========================================================================*/
|
|
void kb_init_once(void)
|
|
{
|
|
int i;
|
|
u8_t ccb;
|
|
|
|
env_parse("sticky_alt", "d", 0, &sticky_alt_mode, 0, 1);
|
|
env_parse("debug_fkeys", "d", 0, &debug_fkeys, 0, 1);
|
|
|
|
set_leds(); /* turn off numlock led */
|
|
scan_keyboard(NULL, NULL); /* discard leftover keystroke */
|
|
|
|
/* Clear the function key observers array. Also see func_key(). */
|
|
for (i=0; i<12; i++) {
|
|
fkey_obs[i].proc_nr = NONE; /* F1-F12 observers */
|
|
fkey_obs[i].events = 0; /* F1-F12 observers */
|
|
sfkey_obs[i].proc_nr = NONE; /* Shift F1-F12 observers */
|
|
sfkey_obs[i].events = 0; /* Shift F1-F12 observers */
|
|
}
|
|
|
|
kbd.minor= KBD_MINOR;
|
|
kbdaux.minor= KBDAUX_MINOR;
|
|
|
|
/* Set interrupt handler and enable keyboard IRQ. */
|
|
irq_hook_id = KEYBOARD_IRQ; /* id to be returned on interrupt */
|
|
if ((i=sys_irqsetpolicy(KEYBOARD_IRQ, IRQ_REENABLE, &irq_hook_id)) != OK)
|
|
panic("Couldn't set keyboard IRQ policy: %d", i);
|
|
if ((i=sys_irqenable(&irq_hook_id)) != OK)
|
|
panic("Couldn't enable keyboard IRQs: %d", i);
|
|
kbd_irq_set |= (1 << KEYBOARD_IRQ);
|
|
|
|
/* Set AUX interrupt handler and enable AUX IRQ. */
|
|
aux_irq_hook_id = KBD_AUX_IRQ; /* id to be returned on interrupt */
|
|
if ((i=sys_irqsetpolicy(KBD_AUX_IRQ, IRQ_REENABLE,
|
|
&aux_irq_hook_id)) != OK)
|
|
panic("Couldn't set AUX IRQ policy: %d", i);
|
|
if ((i=sys_irqenable(&aux_irq_hook_id)) != OK)
|
|
panic("Couldn't enable AUX IRQs: %d", i);
|
|
kbd_irq_set |= (1 << KBD_AUX_IRQ);
|
|
|
|
/* Disable the keyboard and aux */
|
|
kbc_cmd0(KBC_DI_KBD);
|
|
kbc_cmd0(KBC_DI_AUX);
|
|
|
|
/* Get the current configuration byte */
|
|
kbc_cmd0(KBC_RD_RAM_CCB);
|
|
ccb= kbc_read();
|
|
|
|
/* Enable both interrupts. */
|
|
kbc_cmd1(KBC_WR_RAM_CCB, ccb | 3);
|
|
|
|
/* Re-enable the keyboard device. */
|
|
kbc_cmd0(KBC_EN_KBD);
|
|
|
|
/* Enable the aux device. */
|
|
kbc_cmd0(KBC_EN_AUX);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbd_loadmap *
|
|
*===========================================================================*/
|
|
int kbd_loadmap(m)
|
|
message *m;
|
|
{
|
|
/* Load a new keymap. */
|
|
return sys_safecopyfrom(m->m_source, (cp_grant_id_t) m->IO_GRANT,
|
|
0, (vir_bytes) keymap, (vir_bytes) sizeof(keymap));
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* do_fkey_ctl *
|
|
*===========================================================================*/
|
|
void do_fkey_ctl(m_ptr)
|
|
message *m_ptr; /* pointer to the request message */
|
|
{
|
|
/* This procedure allows processes to register a function key to receive
|
|
* notifications if it is pressed. At most one binding per key can exist.
|
|
*/
|
|
int s, i;
|
|
int result = EINVAL;
|
|
|
|
switch (m_ptr->FKEY_REQUEST) { /* see what we must do */
|
|
case FKEY_MAP: /* request for new mapping */
|
|
result = OK; /* assume everything will be ok*/
|
|
for (i=0; i < 12; i++) { /* check F1-F12 keys */
|
|
if (bit_isset(m_ptr->FKEY_FKEYS, i+1) ) {
|
|
#if DEAD_CODE
|
|
/* Currently, we don't check if the slot is in use, so that IS
|
|
* can recover after a crash by overtaking its existing mappings.
|
|
* In future, a better solution will be implemented.
|
|
*/
|
|
if (fkey_obs[i].proc_nr == NONE) {
|
|
#endif
|
|
fkey_obs[i].proc_nr = m_ptr->m_source;
|
|
fkey_obs[i].events = 0;
|
|
bit_unset(m_ptr->FKEY_FKEYS, i+1);
|
|
#if DEAD_CODE
|
|
} else {
|
|
printf("WARNING, fkey_map failed F%d\n", i+1);
|
|
result = EBUSY; /* report failure, but try rest */
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
for (i=0; i < 12; i++) { /* check Shift+F1-F12 keys */
|
|
if (bit_isset(m_ptr->FKEY_SFKEYS, i+1) ) {
|
|
#if DEAD_CODE
|
|
if (sfkey_obs[i].proc_nr == NONE) {
|
|
#endif
|
|
sfkey_obs[i].proc_nr = m_ptr->m_source;
|
|
sfkey_obs[i].events = 0;
|
|
bit_unset(m_ptr->FKEY_SFKEYS, i+1);
|
|
#if DEAD_CODE
|
|
} else {
|
|
printf("WARNING, fkey_map failed Shift F%d\n", i+1);
|
|
result = EBUSY; /* report failure but try rest */
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
break;
|
|
case FKEY_UNMAP:
|
|
result = OK; /* assume everything will be ok*/
|
|
for (i=0; i < 12; i++) { /* check F1-F12 keys */
|
|
if (bit_isset(m_ptr->FKEY_FKEYS, i+1) ) {
|
|
if (fkey_obs[i].proc_nr == m_ptr->m_source) {
|
|
fkey_obs[i].proc_nr = NONE;
|
|
fkey_obs[i].events = 0;
|
|
bit_unset(m_ptr->FKEY_FKEYS, i+1);
|
|
} else {
|
|
result = EPERM; /* report failure, but try rest */
|
|
}
|
|
}
|
|
}
|
|
for (i=0; i < 12; i++) { /* check Shift+F1-F12 keys */
|
|
if (bit_isset(m_ptr->FKEY_SFKEYS, i+1) ) {
|
|
if (sfkey_obs[i].proc_nr == m_ptr->m_source) {
|
|
sfkey_obs[i].proc_nr = NONE;
|
|
sfkey_obs[i].events = 0;
|
|
bit_unset(m_ptr->FKEY_SFKEYS, i+1);
|
|
} else {
|
|
result = EPERM; /* report failure, but try rest */
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case FKEY_EVENTS:
|
|
m_ptr->FKEY_FKEYS = m_ptr->FKEY_SFKEYS = 0;
|
|
for (i=0; i < 12; i++) { /* check (Shift+) F1-F12 keys */
|
|
if (fkey_obs[i].proc_nr == m_ptr->m_source) {
|
|
if (fkey_obs[i].events) {
|
|
bit_set(m_ptr->FKEY_FKEYS, i+1);
|
|
fkey_obs[i].events = 0;
|
|
}
|
|
}
|
|
if (sfkey_obs[i].proc_nr == m_ptr->m_source) {
|
|
if (sfkey_obs[i].events) {
|
|
bit_set(m_ptr->FKEY_SFKEYS, i+1);
|
|
sfkey_obs[i].events = 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Almost done, return result to caller. */
|
|
m_ptr->m_type = result;
|
|
if ((s = sendnb(m_ptr->m_source, m_ptr)) != OK)
|
|
printf("TTY: unable to reply to %d: %d", m_ptr->m_source, s);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* func_key *
|
|
*===========================================================================*/
|
|
static int func_key(scode)
|
|
int scode; /* scan code for a function key */
|
|
{
|
|
/* This procedure traps function keys for debugging purposes. Observers of
|
|
* function keys are kept in a global array. If a subject (a key) is pressed
|
|
* the observer is notified of the event. Initialization of the arrays is done
|
|
* in kb_init, where NONE is set to indicate there is no interest in the key.
|
|
* Returns FALSE on a key release or if the key is not observable.
|
|
*/
|
|
int key;
|
|
int proc_nr;
|
|
|
|
/* Ignore key releases. If this is a key press, get full key code. */
|
|
if (scode & KEY_RELEASE) return(FALSE); /* key release */
|
|
key = map_key(scode); /* include modifiers */
|
|
|
|
/* Key pressed, now see if there is an observer for the pressed key.
|
|
* F1-F12 observers are in fkey_obs array.
|
|
* SHIFT F1-F12 observers are in sfkey_req array.
|
|
* CTRL F1-F12 reserved (see kb_read)
|
|
* ALT F1-F12 reserved (see kb_read)
|
|
* Other combinations are not in use. Note that Alt+Shift+F1-F12 is yet
|
|
* defined in <minix/keymap.h>, and thus is easy for future extensions.
|
|
*/
|
|
if (F1 <= key && key <= F12) { /* F1-F12 */
|
|
proc_nr = fkey_obs[key - F1].proc_nr;
|
|
fkey_obs[key - F1].events ++ ;
|
|
} else if (SF1 <= key && key <= SF12) { /* Shift F2-F12 */
|
|
proc_nr = sfkey_obs[key - SF1].proc_nr;
|
|
sfkey_obs[key - SF1].events ++;
|
|
}
|
|
else {
|
|
return(FALSE); /* not observable */
|
|
}
|
|
|
|
/* See if an observer is registered and send it a message. */
|
|
if (proc_nr != NONE) {
|
|
notify(proc_nr);
|
|
}
|
|
return(TRUE);
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* show_key_mappings *
|
|
*===========================================================================*/
|
|
static void show_key_mappings()
|
|
{
|
|
int i,s;
|
|
struct proc proc;
|
|
|
|
printf("\n");
|
|
printf("System information. Known function key mappings to request debug dumps:\n");
|
|
printf("-------------------------------------------------------------------------\n");
|
|
for (i=0; i<12; i++) {
|
|
|
|
printf(" %sF%d: ", i+1<10? " ":"", i+1);
|
|
if (fkey_obs[i].proc_nr != NONE) {
|
|
if ((s = sys_getproc(&proc, fkey_obs[i].proc_nr))!=OK)
|
|
printf("%-14.14s", "<unknown>");
|
|
else
|
|
printf("%-14.14s", proc.p_name);
|
|
} else {
|
|
printf("%-14.14s", "<none>");
|
|
}
|
|
|
|
printf(" %sShift-F%d: ", i+1<10? " ":"", i+1);
|
|
if (sfkey_obs[i].proc_nr != NONE) {
|
|
if ((s = sys_getproc(&proc, sfkey_obs[i].proc_nr))!=OK)
|
|
printf("%-14.14s", "<unknown>");
|
|
else
|
|
printf("%-14.14s", proc.p_name);
|
|
} else {
|
|
printf("%-14.14s", "<none>");
|
|
}
|
|
printf("\n");
|
|
}
|
|
printf("\n");
|
|
printf("Press one of the registered function keys to trigger a debug dump.\n");
|
|
printf("\n");
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* scan_keyboard *
|
|
*===========================================================================*/
|
|
static int scan_keyboard(bp, isauxp)
|
|
unsigned char *bp;
|
|
int *isauxp;
|
|
{
|
|
u32_t b, sb;
|
|
|
|
if(sys_inb(KB_STATUS, &sb) != OK)
|
|
printf("scan_keyboard: sys_inb failed\n");
|
|
|
|
if (!(sb & KB_OUT_FULL))
|
|
{
|
|
if (kbdout.avail && !kbdout.expect_ack)
|
|
kbd_send();
|
|
return 0;
|
|
}
|
|
if(sys_inb(KEYBD, &b) != OK)
|
|
printf("scan_keyboard: 2 sys_inb failed\n");
|
|
#if 0
|
|
printf("got byte 0x%x from %s\n", b, (sb & KB_AUX_BYTE) ? "AUX" : "keyboard");
|
|
#endif
|
|
if (!(sb & KB_AUX_BYTE) && b == KB_ACK && kbdout.expect_ack)
|
|
{
|
|
#if 0
|
|
printf("got ACK from keyboard\n");
|
|
#endif
|
|
kbdout.expect_ack= 0;
|
|
micro_delay(KBC_IN_DELAY);
|
|
kbd_send();
|
|
return 0;
|
|
}
|
|
if (bp)
|
|
*bp= b;
|
|
if (isauxp)
|
|
*isauxp= !!(sb & KB_AUX_BYTE);
|
|
if (kbdout.avail && !kbdout.expect_ack)
|
|
{
|
|
micro_delay(KBC_IN_DELAY);
|
|
kbd_send();
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*===========================================================================*
|
|
* kbd_watchdog *
|
|
*===========================================================================*/
|
|
static void kbd_watchdog(timer_t *UNUSED(tmrp))
|
|
{
|
|
|
|
kbd_watchdog_set= 0;
|
|
if (!kbdout.avail)
|
|
return; /* Watchdog is no longer needed */
|
|
if (!kbd_alive)
|
|
{
|
|
printf("kbd_watchdog: should reset keyboard\n");
|
|
}
|
|
kbd_alive= 0;
|
|
|
|
set_timer(&tmr_kbd_wd, system_hz, kbd_watchdog, 0);
|
|
|
|
kbd_watchdog_set= 1;
|
|
}
|