minix/kernel/arch/i386/include/archconst.h
Tomas Hruby 62c666566e SMP - We boot APs
- kernel detects CPUs by searching ACPI tables for local apic nodes

- each CPU has its own TSS that points to its own stack. All cpus boot
  on the same boot stack (in sequence) but switch to its private stack
  as soon as they can.

- final booting code in main() placed in bsp_finish_booting() which is
  executed only after the BSP switches to its final stack

- apic functions to send startup interrupts

- assembler functions to handle CPU features not needed for single cpu
  mode like memory barries, HT detection etc.

- new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and
  kernel/arch/i386/include/arch_smp.h

- 16-bit trampoline code for the APs. It is executed by each AP after
  receiving startup IPIs it brings up the CPUs to 32bit mode and let
  them spin in an infinite loop so they don't do any damage.

- implementation of kernel spinlock

- CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 14:09:52 +00:00

169 lines
6.9 KiB
C

#ifndef _I386_ACONST_H
#define _I386_ACONST_H 1
#include <machine/interrupt.h>
#include <machine/memory.h>
#define NR_REMOTE_SEGS 3 /* # remote memory regions (variable) */
/* Constants for protected mode. */
/* Table sizes. */
#define GDT_SIZE (FIRST_LDT_INDEX + NR_TASKS + NR_PROCS)
/* spec. and LDT's */
#define IDT_SIZE 256 /* the table is set to it's maximal size */
/* Fixed global descriptors. 1 to 7 are prescribed by the BIOS. */
#define GDT_INDEX 1 /* GDT descriptor */
#define IDT_INDEX 2 /* IDT descriptor */
#define DS_INDEX 3 /* kernel DS */
#define ES_INDEX 4 /* kernel ES (386: flag 4 Gb at startup) */
#define SS_INDEX 5 /* kernel SS (386: monitor SS at startup) */
#define CS_INDEX 6 /* kernel CS */
#define MON_CS_INDEX 7 /* temp for BIOS (386: monitor CS at startup) */
#define TSS_INDEX_FIRST 8 /* first kernel TSS */
#define TSS_INDEX_BOOT TSS_INDEX_FIRST
#define TSS_INDEX(cpu) (TSS_INDEX_FIRST + (cpu)) /* per cpu kernel tss */
#define FIRST_LDT_INDEX TSS_INDEX(CONFIG_MAX_CPUS) /* rest of descriptors are LDT's */
/* Descriptor structure offsets. */
#define DESC_BASE 2 /* to base_low */
#define DESC_BASE_MIDDLE 4 /* to base_middle */
#define DESC_ACCESS 5 /* to access byte */
#define DESC_SIZE 8 /* sizeof (struct segdesc_s) */
/*
* WARNING no () around the macros, be careful. This is because of ACK assembler
* and will be fixed after switching to GAS
*/
#define GDT_SELECTOR GDT_INDEX * DESC_SIZE
#define IDT_SELECTOR IDT_INDEX * DESC_SIZE
#define DS_SELECTOR DS_INDEX * DESC_SIZE
#define ES_SELECTOR ES_INDEX * DESC_SIZE
/* flat DS is less privileged ES */
#define FLAT_DS_SELECTOR ES_SELECTOR
#define SS_SELECTOR SS_INDEX * DESC_SIZE
#define CS_SELECTOR CS_INDEX * DESC_SIZE
#define MON_CS_SELECTOR MON_CS_INDEX * DESC_SIZE
#define TSS_SELECTOR(cpu) (TSS_INDEX(cpu) * DESC_SIZE)
#define TSS_SELECTOR_BOOT (TSS_INDEX_BOOT * DESC_SIZE)
/* Privileges. */
#define INTR_PRIVILEGE 0 /* kernel and interrupt handlers */
#define USER_PRIVILEGE 3 /* servers and user processes */
#define RPL_MASK 0x03 /* bits in selector RPL */
/* 286 hardware constants. */
/* Exception vector numbers. */
#define BOUNDS_VECTOR 5 /* bounds check failed */
#define INVAL_OP_VECTOR 6 /* invalid opcode */
#define COPROC_NOT_VECTOR 7 /* coprocessor not available */
#define DOUBLE_FAULT_VECTOR 8
#define COPROC_SEG_VECTOR 9 /* coprocessor segment overrun */
#define INVAL_TSS_VECTOR 10 /* invalid TSS */
#define SEG_NOT_VECTOR 11 /* segment not present */
#define STACK_FAULT_VECTOR 12 /* stack exception */
#define PROTECTION_VECTOR 13 /* general protection */
/* Selector bits. */
#define TI 0x04 /* table indicator */
#define RPL 0x03 /* requester privilege level */
/* Base and limit sizes and shifts. */
#define BASE_MIDDLE_SHIFT 16 /* shift for base --> base_middle */
/* Access-byte and type-byte bits. */
#define PRESENT 0x80 /* set for descriptor present */
#define DPL 0x60 /* descriptor privilege level mask */
#define DPL_SHIFT 5
#define SEGMENT 0x10 /* set for segment-type descriptors */
/* Access-byte bits. */
#define EXECUTABLE 0x08 /* set for executable segment */
#define CONFORMING 0x04 /* set for conforming segment if executable */
#define EXPAND_DOWN 0x04 /* set for expand-down segment if !executable*/
#define READABLE 0x02 /* set for readable segment if executable */
#define WRITEABLE 0x02 /* set for writeable segment if !executable */
#define TSS_BUSY 0x02 /* set if TSS descriptor is busy */
#define ACCESSED 0x01 /* set if segment accessed */
/* Special descriptor types. */
#define AVL_286_TSS 1 /* available 286 TSS */
#define LDT 2 /* local descriptor table */
#define BUSY_286_TSS 3 /* set transparently to the software */
#define CALL_286_GATE 4 /* not used */
#define TASK_GATE 5 /* only used by debugger */
#define INT_286_GATE 6 /* interrupt gate, used for all vectors */
#define TRAP_286_GATE 7 /* not used */
#define INT_GATE_TYPE (INT_286_GATE | DESC_386_BIT)
#define TSS_TYPE (AVL_286_TSS | DESC_386_BIT)
/* Extra 386 hardware constants. */
/* Exception vector numbers. */
#define PAGE_FAULT_VECTOR 14
#define COPROC_ERR_VECTOR 16 /* coprocessor error */
#define ALIGNMENT_CHECK_VECTOR 17
#define MACHINE_CHECK_VECTOR 18
#define SIMD_EXCEPTION_VECTOR 19 /* SIMD Floating-Point Exception (#XM) */
/* Descriptor structure offsets. */
#define DESC_GRANULARITY 6 /* to granularity byte */
#define DESC_BASE_HIGH 7 /* to base_high */
/* Type-byte bits. */
#define DESC_386_BIT 0x08 /* 386 types are obtained by ORing with this */
/* LDT's and TASK_GATE's don't need it */
/* Base and limit sizes and shifts. */
#define BASE_HIGH_SHIFT 24 /* shift for base --> base_high */
#define BYTE_GRAN_MAX 0xFFFFFL /* maximum size for byte granular segment */
#define GRANULARITY_SHIFT 16 /* shift for limit --> granularity */
#define OFFSET_HIGH_SHIFT 16 /* shift for (gate) offset --> offset_high */
#define PAGE_GRAN_SHIFT 12 /* extra shift for page granular limits */
/* Granularity byte. */
#define GRANULAR 0x80 /* set for 4K granularilty */
#define DEFAULT 0x40 /* set for 32-bit defaults (executable seg) */
#define BIG 0x40 /* set for "BIG" (expand-down seg) */
#define AVL 0x10 /* 0 for available */
#define LIMIT_HIGH 0x0F /* mask for high bits of limit */
/* Program stack words and masks. */
#define INIT_PSW 0x0200 /* initial psw */
#define INIT_TASK_PSW 0x1200 /* initial psw for tasks (with IOPL 1) */
#define TRACEBIT 0x0100 /* OR this with psw in proc[] for tracing */
#define SETPSW(rp, new) /* permits only certain bits to be set */ \
((rp)->p_reg.psw = (rp)->p_reg.psw & ~0xCD5 | (new) & 0xCD5)
#define IF_MASK 0x00000200
#define IOPL_MASK 0x003000
#define vir2phys(vir) ((phys_bytes)((kinfo.data_base + (vir_bytes) (vir))))
#define phys2vir(ph) ((vir_bytes)((vir_bytes) (ph) - kinfo.data_base))
#define INTEL_CPUID_GEN_EBX 0x756e6547 /* ASCII value of "Genu" */
#define INTEL_CPUID_GEN_EDX 0x49656e69 /* ASCII value of "ineI" */
#define INTEL_CPUID_GEN_ECX 0x6c65746e /* ASCII value of "ntel" */
#define AMD_CPUID_GEN_EBX 0x68747541 /* ASCII value of "Auth" */
#define AMD_CPUID_GEN_EDX 0x69746e65 /* ASCII value of "enti" */
#define AMD_CPUID_GEN_ECX 0x444d4163 /* ASCII value of "cAMD" */
/* fpu context should be saved in 16-byte aligned memory */
#define FPUALIGN 16
/* Poweroff 16-bit code address */
#define BIOS_POWEROFF_ENTRY 0x1000
/*
* defines how many bytes are reserved at the top of the kernel stack for global
* information like currently scheduled process or current cpu id
*/
#define X86_STACK_TOP_RESERVED (2 * sizeof(reg_t))
#endif /* _I386_ACONST_H */