minix/usr.bin/hexdump/hexdump.1
Thomas Cort 1e33498f8c Importing usr.bin/hexdump
Replaces commands/hexdump as well as commands/od.
No Minix-specific changes were needed.

test/testsh2.sh was modified to match the spacing
used in the output of the NetBSD od command.

Change-Id: I65ee1d30e8cdd546097462df7c38c2d38f3e891d
2013-10-29 15:18:45 -04:00

351 lines
10 KiB
Groff

.\" $NetBSD: hexdump.1,v 1.24 2012/07/06 14:10:06 wiz Exp $
.\"
.\" Copyright (c) 1989, 1990, 1993
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" from: @(#)hexdump.1 8.2 (Berkeley) 4/18/94
.\"
.Dd June 24, 2012
.Dt HEXDUMP 1
.Os
.Sh NAME
.Nm hexdump
.Nd ascii, decimal, hexadecimal, octal dump
.Sh SYNOPSIS
.Nm
.Op Fl bCcdovx
.Op Fl e Ar format_string
.Op Fl f Ar format_file
.Op Fl n Ar length
.Op Fl s Ar skip
.Op Ar
.Sh DESCRIPTION
The
.Nm
utility is a filter which displays each specified
.Ar file ,
or the standard input if no
.Ar file
arguments are specified, in a user specified
format.
.Pp
The options are as follows:
.Bl -tag -width Fl
.It Fl b
.Em One-byte octal display .
Display the input offset in hexadecimal, followed by sixteen
space-separated, three column, zero-filled, bytes of input data,
in octal, per line.
.It Fl C
.Em Canonical hex+ASCII display .
Display the input offset in hexadecimal, followed by sixteen
space-separated, two column, hexadecimal bytes, followed by the
same sixteen bytes in %_p format enclosed in
.Sq |
characters.
.It Fl c
.Em One-byte character display .
Display the input offset in hexadecimal, followed by sixteen
space-separated, three column, space-filled, characters of input
data per line.
.It Fl d
.Em Two-byte decimal display .
Display the input offset in hexadecimal, followed by eight
space-separated, five column, zero-filled, two-byte units
of input data, in unsigned decimal, per line.
.It Fl e Ar format_string
Specify a format string to be used for displaying data.
.It Fl f Ar format_file
Specify a file that contains one or more newline separated format strings.
Empty lines and lines whose first non-blank character is a hash mark
.Pq Sq #
are ignored.
.It Fl n Ar length
Interpret only
.Ar length
bytes of input.
.It Fl o
.Em Two-byte octal display .
Display the input offset in hexadecimal, followed by eight
space-separated, six column, zero-filled, two byte quantities of
input data, in octal, per line.
.It Fl s Ar skip
Skip
.Ar skip
bytes from the beginning of the input.
By default,
.Ar skip
is interpreted as a decimal number.
With a leading
.Cm 0x
or
.Cm 0X ,
.Ar skip
is interpreted as a hexadecimal number;
otherwise, with a leading
.Cm 0 ,
.Ar skip
is interpreted as an octal number.
Appending the character
.Cm b ,
.Cm k ,
or
.Cm m
to
.Ar skip
causes it to be interpreted as a multiple of
.Li 512 ,
.Li 1024 ,
or
.Li 1048576 ,
respectively.
.It Fl v
The
.Fl v
option causes
.Nm
to display all input data.
Without the
.Fl v
option, any number of groups of output lines, which would be
identical to the immediately preceding group of output lines (except
for the input offsets), are replaced with a line containing a
single asterisk
.Pq Sq \&* .
.It Fl x
.Em Two-byte hexadecimal display .
Display the input offset in hexadecimal, followed by eight, space
separated, four column, zero-filled, two-byte quantities of input
data, in hexadecimal, per line.
.El
.Pp
For each input file,
.Nm
sequentially copies the input to standard output, transforming the
data according to the format strings specified by the
.Fl e
and
.Fl f
options, in the order that they were specified.
.Ss Formats
A format string contains any number of format units, separated by
whitespace.
A format unit contains up to three items: an iteration count, a byte
count, and a format.
.Pp
The iteration count is an optional positive integer, which defaults to
one.
Each format is applied iteration count times.
.Pp
The byte count is an optional positive integer.
If specified it defines the number of bytes to be interpreted by
each iteration of the format.
.Pp
If an iteration count and/or a byte count is specified, a single slash
.Pq Sq /
must be placed after the iteration count and/or before the byte count
to disambiguate them.
Any whitespace before or after the slash is ignored.
.Pp
The format is required and must be surrounded by double quote
.Pq Sq \&"
marks.
It is interpreted as a fprintf-style format string (see
.Xr fprintf 3 ) ,
with the
following exceptions:
.Bl -bullet -offset indent
.It
An asterisk
.Pq Sq \&*
may not be used as a field width or precision.
.It
A byte count or field precision
.Em is
required for each
.Sq s
conversion
character (unlike the
.Xr fprintf 3
default which prints the entire string if the precision is unspecified).
.It
The conversion characters
.Sq h ,
.Sq l ,
.Sq n ,
.Sq p ,
and
.Sq q
are
not supported.
.It
The single character escape sequences
described in the C standard are supported:
.Bd -ragged -offset indent -compact
.Bl -column Xalert_characterX
.It NUL \e0
.It Aq alert character \ea
.It Aq backspace \eb
.It Aq form-feed \ef
.It Aq newline \en
.It Aq carriage return \er
.It Aq tab \et
.It Aq vertical tab \ev
.El
.Ed
.El
.Pp
.Nm
also supports the following additional conversion strings:
.Bl -tag -width Fl
.It Cm \&_a Ns Op Cm dox
Display the input offset, cumulative across input files, of the
next byte to be displayed.
The appended characters
.Cm d ,
.Cm o ,
and
.Cm x
specify the display base
as decimal, octal or hexadecimal respectively.
.It Cm \&_A Ns Op Cm dox
Identical to the
.Cm \&_a
conversion string except that it is only performed
once, when all of the input data has been processed.
.It Cm \&_c
Output characters in the default character set.
Non-printing characters are displayed in three character, zero-padded
octal, except for those representable by standard escape notation
(see above),
which are displayed as two character strings.
.It Cm _p
Output characters in the default character set.
Non-printing characters are displayed as a single
.Sq Cm \&. .
.It Cm _u
Output US ASCII characters, with the exception that control characters are
displayed using the following, lower-case, names.
Characters greater than 0xff, hexadecimal, are displayed as hexadecimal
strings.
.Bl -column \&000_nu \&001_so \&002_st \&003_et \&004_eo
.It \&000\ nul Ta 001\ soh Ta 002\ stx Ta 003\ etx Ta 004\ eot Ta 005\ enq
.It \&006\ ack Ta 007\ bel Ta 008\ bs Ta 009\ ht Ta 00A\ lf Ta 00B\ vt
.It \&00C\ ff Ta 00D\ cr Ta 00E\ so Ta 00F\ si Ta 010\ dle Ta 011\ dc1
.It \&012\ dc2 Ta 013\ dc3 Ta 014\ dc4 Ta 015\ nak Ta 016\ syn Ta 017\ etb
.It \&018\ can Ta 019\ em Ta 01A\ sub Ta 01B\ esc Ta 01C\ fs Ta 01D\ gs
.It \&01E\ rs Ta 01F\ us Ta 07F\ del
.El
.El
.Pp
The default and supported byte counts for the conversion characters
are as follows:
.Bl -tag -width "Xc,_Xc,_Xc,_Xc,_Xc,_Xc" -offset indent
.It Li \&%_c , \&%_p , \&%_u , \&%c
One byte counts only.
.It Li \&%d , \&%i , \&%o , \&%u , \&%X , \&%x
Four byte default, one, two, four and eight byte counts supported.
.It Li \&%E , \&%e , \&%f , \&%G , \&%g
Eight byte default, four byte counts supported.
.El
.Pp
The amount of data interpreted by each format string is the sum of the
data required by each format unit, which is the iteration count times the
byte count, or the iteration count times the number of bytes required by
the format if the byte count is not specified.
.Pp
The input is manipulated in
.Dq blocks ,
where a block is defined as the
largest amount of data specified by any format string.
Format strings interpreting less than an input block's worth of data,
whose last format unit both interprets some number of bytes and does
not have a specified iteration count, have the iteration count
incremented until the entire input block has been processed or there
is not enough data remaining in the block to satisfy the format string.
.Pp
If, either as a result of user specification or
.Nm
modifying
the iteration count as described above, an iteration count is
greater than one, no trailing whitespace characters are output
during the last iteration.
.Pp
It is an error to specify a byte count as well as multiple conversion
characters or strings unless all but one of the conversion characters
or strings is
.Cm \&_a
or
.Cm \&_A .
.Pp
If, as a result of the specification of the
.Fl n
option or end-of-file being reached, input data only partially
satisfies a format string, the input block is zero-padded sufficiently
to display all available data (i.e. any format units overlapping the
end of data will display some number of the zero bytes).
.Pp
Further output by such format strings is replaced by an equivalent
number of spaces.
An equivalent number of spaces is defined as the number of spaces
output by an
.Cm s
conversion character with the same field width
and precision as the original conversion character or conversion
string but with any
.Sq Li \&+ ,
.Sq \&\ \& ,
and
.Sq Li \&#
conversion flag characters
removed, and referencing a
.Dv NULL
string.
.Pp
If no format strings are specified, the default display is equivalent
to specifying the
.Fl x
option.
.Sh EXIT STATUS
.Ex -std
.Sh EXAMPLES
Display the input in perusal format:
.Bd -literal -offset indent
"%06.6_ao " 12/1 "%3_u "
"\et\et" "%_p "
"\en"
.Ed
.Pp
Implement the
.Fl x
option:
.Bd -literal -offset indent
"%07.7_Ax\en"
"%07.7_ax " 8/2 "%04x " "\en"
.Ed
.Sh SEE ALSO
.Xr od 1