this change - makes panic() variadic, doing full printf() formatting - no more NO_NUM, and no more separate printf() statements needed to print extra info (or something in hex) before panicing - unifies panic() - same panic() name and usage for everyone - vm, kernel and rest have different names/syntax currently in order to implement their own luxuries, but no longer - throws out the 1st argument, to make source less noisy. the panic() in syslib retrieves the server name from the kernel so it should be clear enough who is panicing; e.g. panic("sigaction failed: %d", errno); looks like: at_wini(73130): panic: sigaction failed: 0 syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a - throws out report() - printf() is more convenient and powerful - harmonizes/fixes the use of panic() - there were a few places that used printf-style formatting (didn't work) and newlines (messes up the formatting) in panic() - throws out a few per-server panic() functions - cleans up a tie-in of tty with panic() merging printf() and panic() statements to be done incrementally.
167 lines
5.2 KiB
C
167 lines
5.2 KiB
C
/*
|
|
** File: 3c503.c Dec. 20, 1996
|
|
**
|
|
** Author: Giovanni Falzoni <gfalzoni@inwind.it>
|
|
**
|
|
** Driver for the Etherlink II boards. Works in shared memory mode.
|
|
** Programmed I/O could be used as well but would result in poor
|
|
** performances. This file contains only the board specific code,
|
|
** the rest is in 8390.c Code specific for ISA bus only
|
|
**
|
|
** $Id$
|
|
*/
|
|
|
|
#include "drivers.h"
|
|
#include <net/gen/ether.h>
|
|
#include <net/gen/eth_io.h>
|
|
#include "dp.h"
|
|
|
|
#if (ENABLE_3C503 == 1)
|
|
|
|
#include "8390.h"
|
|
#include "3c503.h"
|
|
|
|
/*
|
|
** Name: void el2_init(dpeth_t *dep);
|
|
** Function: Initalize hardware and data structures.
|
|
*/
|
|
static void el2_init(dpeth_t * dep)
|
|
{
|
|
int ix, irq;
|
|
int sendq_nr;
|
|
int cntr;
|
|
|
|
/* Map the address PROM to lower I/O address range */
|
|
cntr = inb_el2(dep, EL2_CNTR);
|
|
outb_el2(dep, EL2_CNTR, cntr | ECNTR_SAPROM);
|
|
|
|
/* Read station address from PROM */
|
|
for (ix = EL2_EA0; ix <= EL2_EA5; ix += 1)
|
|
dep->de_address.ea_addr[ix] = inb_el2(dep, ix);
|
|
|
|
/* Map the 8390 back to lower I/O address range */
|
|
outb_el2(dep, EL2_CNTR, cntr);
|
|
|
|
/* Enable memory, but turn off interrupts until we are ready */
|
|
outb_el2(dep, EL2_CFGR, ECFGR_IRQOFF);
|
|
|
|
dep->de_data_port = dep->de_dp8390_port = dep->de_base_port;
|
|
dep->de_prog_IO = FALSE; /* Programmed I/O not yet available */
|
|
|
|
/* Check width of data bus */
|
|
outb_el2(dep, DP_CR, CR_PS_P0 | CR_NO_DMA | CR_STP);
|
|
outb_el2(dep, DP_DCR, 0);
|
|
outb_el2(dep, DP_CR, CR_PS_P2 | CR_NO_DMA | CR_STP);
|
|
dep->de_16bit = (inb_el2(dep, DP_DCR) & DCR_WTS) != 0;
|
|
outb_el2(dep, DP_CR, CR_PS_P0 | CR_NO_DMA | CR_STP);
|
|
|
|
/* Allocate one send buffer (1.5kb) per 8kb of on board memory. */
|
|
/* Only 8kb of 3c503/16 boards are used to avoid specific routines */
|
|
sendq_nr = dep->de_ramsize / 0x2000;
|
|
if (sendq_nr < 1)
|
|
sendq_nr = 1;
|
|
else if (sendq_nr > SENDQ_NR)
|
|
sendq_nr = SENDQ_NR;
|
|
|
|
dep->de_sendq_nr = sendq_nr;
|
|
for (ix = 0; ix < sendq_nr; ix++)
|
|
dep->de_sendq[ix].sq_sendpage = (ix * SENDQ_PAGES) + EL2_SM_START_PG;
|
|
|
|
dep->de_startpage = (ix * SENDQ_PAGES) + EL2_SM_START_PG;
|
|
dep->de_stoppage = EL2_SM_STOP_PG;
|
|
|
|
outb_el2(dep, EL2_STARTPG, dep->de_startpage);
|
|
outb_el2(dep, EL2_STOPPG, dep->de_stoppage);
|
|
|
|
/* Point the vector pointer registers somewhere ?harmless?. */
|
|
outb_el2(dep, EL2_VP2, 0xFF); /* Point at the ROM restart location */
|
|
outb_el2(dep, EL2_VP1, 0xFF); /* 0xFFFF:0000 (from original sources) */
|
|
outb_el2(dep, EL2_VP0, 0x00); /* - What for protected mode? */
|
|
|
|
/* Set interrupt level for 3c503 */
|
|
irq = (dep->de_irq &= ~DEI_DEFAULT); /* Strip the default flag. */
|
|
if (irq == 9) irq = 2;
|
|
if (irq < 2 || irq > 5) panic("bad 3c503 irq configuration: %d", irq);
|
|
outb_el2(dep, EL2_IDCFG, (0x04 << irq));
|
|
|
|
outb_el2(dep, EL2_DRQCNT, 0x08); /* Set burst size to 8 */
|
|
outb_el2(dep, EL2_DMAAH, EL2_SM_START_PG); /* Put start of TX */
|
|
outb_el2(dep, EL2_DMAAL, 0x00); /* buffer in the GA DMA reg */
|
|
|
|
outb_el2(dep, EL2_CFGR, ECFGR_NORM); /* Enable shared memory */
|
|
|
|
ns_init(dep); /* Initialize DP controller */
|
|
|
|
printf("%s: Etherlink II%s (%s) at %X:%d:%05lX - ",
|
|
dep->de_name, dep->de_16bit ? "/16" : "", "3c503",
|
|
dep->de_base_port, dep->de_irq,
|
|
dep->de_linmem + dep->de_offset_page);
|
|
for (ix = 0; ix < SA_ADDR_LEN; ix += 1)
|
|
printf("%02X%c", dep->de_address.ea_addr[ix],
|
|
ix < SA_ADDR_LEN - 1 ? ':' : '\n');
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Name: void el2_stop(dpeth_t *dep);
|
|
** Function: Stops board by disabling interrupts.
|
|
*/
|
|
static void el2_stop(dpeth_t * dep)
|
|
{
|
|
|
|
outb_el2(dep, EL2_CFGR, ECFGR_IRQOFF);
|
|
sys_irqdisable(&dep->de_hook); /* disable interrupts */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Name: void el2_probe(dpeth_t *dep);
|
|
** Function: Probe for the presence of an EtherLink II card.
|
|
** Initialize memory addressing if card detected.
|
|
*/
|
|
int el2_probe(dpeth_t * dep)
|
|
{
|
|
int iobase, membase;
|
|
int thin;
|
|
|
|
/* Thin ethernet or AUI? */
|
|
thin = (dep->de_linmem & 1) ? ECNTR_AUI : ECNTR_THIN;
|
|
|
|
/* Location registers should have 1 bit set */
|
|
if (!(iobase = inb_el2(dep, EL2_IOBASE))) return FALSE;
|
|
if (!((membase = inb_el2(dep, EL2_MEMBASE)) & 0xF0)) return FALSE;
|
|
if ((iobase & (iobase - 1)) || (membase & (membase - 1))) return FALSE;
|
|
|
|
/* Resets board */
|
|
outb_el2(dep, EL2_CNTR, ECNTR_RESET | thin);
|
|
milli_delay(1);
|
|
outb_el2(dep, EL2_CNTR, thin);
|
|
milli_delay(5);
|
|
|
|
/* Map the address PROM to lower I/O address range */
|
|
outb_el2(dep, EL2_CNTR, ECNTR_SAPROM | thin);
|
|
if (inb_el2(dep, EL2_EA0) != 0x02 || /* Etherlink II Station address */
|
|
inb_el2(dep, EL2_EA1) != 0x60 || /* MUST be 02:60:8c:xx:xx:xx */
|
|
inb_el2(dep, EL2_EA2) != 0x8C)
|
|
return FALSE; /* No Etherlink board at this address */
|
|
|
|
/* Map the 8390 back to lower I/O address range */
|
|
outb_el2(dep, EL2_CNTR, thin);
|
|
|
|
/* Setup shared memory addressing for 3c503 */
|
|
dep->de_linmem = ((membase & 0xC0) ? EL2_BASE_0D8000 : EL2_BASE_0C8000) +
|
|
((membase & 0xA0) ? (EL2_BASE_0CC000 - EL2_BASE_0C8000) : 0x0000);
|
|
|
|
/* Shared memory starts at 0x2000 (8kb window) */
|
|
dep->de_offset_page = (EL2_SM_START_PG * DP_PAGESIZE);
|
|
dep->de_linmem -= dep->de_offset_page;
|
|
dep->de_ramsize = (EL2_SM_STOP_PG - EL2_SM_START_PG) * DP_PAGESIZE;
|
|
|
|
/* Board initialization and stop functions */
|
|
dep->de_initf = el2_init;
|
|
dep->de_stopf = el2_stop;
|
|
return TRUE;
|
|
}
|
|
#endif /* ENABLE_3C503 */
|
|
|
|
/** 3c503.c **/
|