minix/drivers/sb16/sb16_mixer.c
Cristiano Giuffrida d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00

407 lines
11 KiB
C

/* This file contains the driver for the mixer on
* a SoundBlaster 16 soundcard.
*
* The driver supports the following operations (using message format m2):
*
* m_type DEVICE IO_ENDPT COUNT POSITION ADRRESS
* ----------------------------------------------------------------
* | DEV_OPEN | device | proc nr | | | |
* |------------+---------+---------+---------+---------+---------|
* | DEV_CLOSE | device | proc nr | | | |
* |------------+---------+---------+---------+---------+---------|
* | DEV_IOCTL | device | proc nr |func code| | buf_ptr |
* ----------------------------------------------------------------
*
* The file contains one entry point:
*
* sb16mixer_task: main entry when system is brought up
*
* August 24 2005 Ported driver to user space (Peter Boonstoppel)
* May 20 1995 Author: Michel R. Prevenier
*/
#include "sb16.h"
_PROTOTYPE(void main, (void));
FORWARD _PROTOTYPE( int mixer_init, (void));
FORWARD _PROTOTYPE( int mixer_open, (message *m_ptr));
FORWARD _PROTOTYPE( int mixer_close, (message *m_ptr));
FORWARD _PROTOTYPE( int mixer_ioctl, (message *m_ptr));
FORWARD _PROTOTYPE( int mixer_get, (int reg));
FORWARD _PROTOTYPE( int get_set_volume, (message *m_ptr, int flag));
FORWARD _PROTOTYPE( int get_set_input, (message *m_ptr, int flag, int channel));
FORWARD _PROTOTYPE( int get_set_output, (message *m_ptr, int flag));
PRIVATE int mixer_avail = 0; /* Mixer exists? */
#define dprint (void)
/* SEF functions and variables. */
FORWARD _PROTOTYPE( void sef_local_startup, (void) );
/*===========================================================================*
* main
*===========================================================================*/
PUBLIC void main() {
message mess;
int err, caller, proc_nr;
/* SEF local startup. */
sef_local_startup();
/* Here is the main loop of the mixer task. It waits for a message, carries
* it out, and sends a reply.
*/
while (TRUE) {
sef_receive(ANY, &mess);
caller = mess.m_source;
proc_nr = mess.IO_ENDPT;
switch (caller) {
case HARDWARE: /* Leftover interrupt. */
continue;
case FS_PROC_NR: /* The only legitimate caller. */
break;
default:
dprint("sb16: got message from %d\n", caller);
continue;
}
/* Now carry out the work. */
switch(mess.m_type) {
case DEV_OPEN: err = mixer_open(&mess); break;
case DEV_CLOSE: err = mixer_close(&mess); break;
#ifdef DEV_IOCTL
case DEV_IOCTL: err = mixer_ioctl(&mess); break;
#endif
default: err = EINVAL; break;
}
/* Finally, prepare and send the reply message. */
mess.m_type = TASK_REPLY;
mess.REP_ENDPT = proc_nr;
dprint("%d %d", err, OK);
mess.REP_STATUS = err; /* error code */
send(caller, &mess); /* send reply to caller */
}
}
/*===========================================================================*
* sef_local_startup *
*===========================================================================*/
PRIVATE void sef_local_startup()
{
/* Register live update callbacks. */
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_standard);
/* Let SEF perform startup. */
sef_startup();
}
/*=========================================================================*
* mixer_open
*=========================================================================*/
PRIVATE int mixer_open(m_ptr)
message *m_ptr;
{
dprint("mixer_open\n");
/* try to detect the mixer type */
if (!mixer_avail && mixer_init() != OK) return EIO;
return OK;
}
/*=========================================================================*
* mixer_close
*=========================================================================*/
PRIVATE int mixer_close(m_ptr)
message *m_ptr;
{
dprint("mixer_close\n");
return OK;
}
/*=========================================================================*
* mixer_ioctl
*=========================================================================*/
PRIVATE int mixer_ioctl(m_ptr)
message *m_ptr;
{
int status;
dprint("mixer: got ioctl %d\n", m_ptr->REQUEST);
switch(m_ptr->REQUEST) {
case MIXIOGETVOLUME: status = get_set_volume(m_ptr, 0); break;
case MIXIOSETVOLUME: status = get_set_volume(m_ptr, 1); break;
case MIXIOGETINPUTLEFT: status = get_set_input(m_ptr, 0, 0); break;
case MIXIOGETINPUTRIGHT: status = get_set_input(m_ptr, 0, 1); break;
case MIXIOGETOUTPUT: status = get_set_output(m_ptr, 0); break;
case MIXIOSETINPUTLEFT: status = get_set_input(m_ptr, 1, 0); break;
case MIXIOSETINPUTRIGHT: status = get_set_input(m_ptr, 1, 1); break;
case MIXIOSETOUTPUT: status = get_set_output(m_ptr, 1); break;
default: status = ENOTTY;
}
return status;
}
/*=========================================================================*
* mixer_init
*=========================================================================*/
PRIVATE int mixer_init()
{
/* Try to detect the mixer by writing to MIXER_DAC_LEVEL if the
* value written can be read back the mixer is there
*/
mixer_set(MIXER_DAC_LEVEL, 0x10); /* write something to it */
if(mixer_get(MIXER_DAC_LEVEL) != 0x10) {
dprint("sb16: Mixer not detected\n");
return EIO;
}
/* Enable Automatic Gain Control */
mixer_set(MIXER_AGC, 0x01);
dprint("Mixer detected\n");
mixer_avail = 1;
return OK;
}
/*=========================================================================*
* mixer_get
*=========================================================================*/
PRIVATE int mixer_get(reg)
int reg;
{
int i;
sb16_outb(MIXER_REG, reg);
for(i = 0; i < 100; i++);
return sb16_inb(MIXER_DATA) & 0xff;
}
/*=========================================================================*
* get_set_volume *
*=========================================================================*/
PRIVATE int get_set_volume(m_ptr, flag)
message *m_ptr;
int flag; /* 0 = get, 1 = set */
{
phys_bytes user_phys;
struct volume_level level;
int cmd_left, cmd_right, shift, max_level;
sys_datacopy(m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)&level, (phys_bytes)sizeof(level));
shift = 3;
max_level = 0x1F;
switch(level.device) {
case Master:
cmd_left = MIXER_MASTER_LEFT;
cmd_right = MIXER_MASTER_RIGHT;
break;
case Dac:
cmd_left = MIXER_DAC_LEFT;
cmd_right = MIXER_DAC_RIGHT;
break;
case Fm:
cmd_left = MIXER_FM_LEFT;
cmd_right = MIXER_FM_RIGHT;
break;
case Cd:
cmd_left = MIXER_CD_LEFT;
cmd_right = MIXER_CD_RIGHT;
break;
case Line:
cmd_left = MIXER_LINE_LEFT;
cmd_right = MIXER_LINE_RIGHT;
break;
case Mic:
cmd_left = cmd_right = MIXER_MIC_LEVEL;
break;
case Speaker:
cmd_left = cmd_right = MIXER_PC_LEVEL;
shift = 6;
max_level = 0x03;
break;
case Treble:
cmd_left = MIXER_TREBLE_LEFT;
cmd_right = MIXER_TREBLE_RIGHT;
shift = 4;
max_level = 0x0F;
break;
case Bass:
cmd_left = MIXER_BASS_LEFT;
cmd_right = MIXER_BASS_RIGHT;
shift = 4;
max_level = 0x0F;
break;
default:
return EINVAL;
}
if(flag) { /* Set volume level */
if(level.right < 0) level.right = 0;
else if(level.right > max_level) level.right = max_level;
if(level.left < 0) level.left = 0;
else if(level.left > max_level) level.left = max_level;
mixer_set(cmd_right, (level.right << shift));
mixer_set(cmd_left, (level.left << shift));
} else { /* Get volume level */
level.left = mixer_get(cmd_left);
level.right = mixer_get(cmd_right);
level.left >>= shift;
level.right >>= shift;
/* Copy back to user */
sys_datacopy(SELF, (vir_bytes)&level, m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, (phys_bytes)sizeof(level));
}
return OK;
}
/*=========================================================================*
* get_set_input *
*=========================================================================*/
PRIVATE int get_set_input(m_ptr, flag, channel)
message *m_ptr;
int flag; /* 0 = get, 1 = set */
int channel; /* 0 = left, 1 = right */
{
phys_bytes user_phys;
struct inout_ctrl input;
int input_cmd, input_mask, mask, del_mask, shift;
sys_datacopy(m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)&input, (phys_bytes)sizeof(input));
input_cmd = (channel == 0 ? MIXER_IN_LEFT : MIXER_IN_RIGHT);
mask = mixer_get(input_cmd);
switch (input.device) {
case Fm:
shift = 5;
del_mask = 0x1F;
break;
case Cd:
shift = 1;
del_mask = 0x79;
break;
case Line:
shift = 3;
del_mask = 0x67;
break;
case Mic:
shift = 0;
del_mask = 0x7E;
break;
default:
return EINVAL;
}
if (flag) { /* Set input */
input_mask = ((input.left == ON ? 1 : 0) << 1) | (input.right == ON ? 1 : 0);
if (shift > 0) input_mask <<= shift;
else input_mask >>= 1;
mask &= del_mask;
mask |= input_mask;
mixer_set(input_cmd, mask);
} else { /* Get input */
if (shift > 0) {
input.left = ((mask >> (shift+1)) & 1 == 1 ? ON : OFF);
input.right = ((mask >> shift) & 1 == 1 ? ON : OFF);
} else {
input.left = ((mask & 1) == 1 ? ON : OFF);
}
/* Copy back to user */
sys_datacopy(SELF, (vir_bytes)&input, m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, (phys_bytes)sizeof(input));
}
return OK;
}
/*=========================================================================*
* get_set_output *
*=========================================================================*/
PRIVATE int get_set_output(m_ptr, flag)
message *m_ptr;
int flag; /* 0 = get, 1 = set */
{
phys_bytes user_phys;
struct inout_ctrl output;
int output_mask, mask, del_mask, shift;
sys_datacopy(m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, SELF, (vir_bytes)&output, (phys_bytes)sizeof(output));
mask = mixer_get(MIXER_OUTPUT_CTRL);
switch (output.device) {
case Cd:
shift = 1;
del_mask = 0x79;
break;
case Line:
shift = 3;
del_mask = 0x67;
break;
case Mic:
shift = 0;
del_mask = 0x7E;
break;
default:
return EINVAL;
}
if (flag) { /* Set input */
output_mask = ((output.left == ON ? 1 : 0) << 1) | (output.right == ON ? 1 : 0);
if (shift > 0) output_mask <<= shift;
else output_mask >>= 1;
mask &= del_mask;
mask |= output_mask;
mixer_set(MIXER_OUTPUT_CTRL, mask);
} else { /* Get input */
if (shift > 0) {
output.left = ((mask >> (shift+1)) & 1 == 1 ? ON : OFF);
output.right = ((mask >> shift) & 1 == 1 ? ON : OFF);
} else {
output.left = ((mask & 1) == 1 ? ON : OFF);
}
/* Copy back to user */
sys_datacopy(SELF, (vir_bytes)&output, m_ptr->IO_ENDPT, (vir_bytes)m_ptr->ADDRESS, (phys_bytes)sizeof(output));
}
return OK;
}