492 lines
13 KiB
C
492 lines
13 KiB
C
/* $NetBSD: i82557.c,v 1.11 2008/12/14 18:46:33 christos Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1998, 1999
|
|
* Matthias Drochner. All rights reserved.
|
|
* Copyright (c) 1995, David Greenman
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/types.h>
|
|
#include <machine/pio.h>
|
|
|
|
#include <dev/ic/i82557reg.h>
|
|
|
|
#include <lib/libsa/stand.h>
|
|
|
|
#include <libi386.h>
|
|
#include <pcivar.h>
|
|
|
|
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
|
|
#include <lib/libkern/libkern.h>
|
|
#include <bootinfo.h>
|
|
#endif
|
|
|
|
#include "etherdrv.h"
|
|
|
|
#define RECVBUF_SIZE 1600 /* struct fxp_rfa + packet */
|
|
|
|
#ifdef _STANDALONE
|
|
static pcihdl_t mytag;
|
|
static char recvbuf[RECVBUF_SIZE];
|
|
#define RECVBUF_PHYS vtophys(recvbuf)
|
|
#define RECVBUF_VIRT ((void *)recvbuf)
|
|
static union _sndbuf {
|
|
struct fxp_cb_config cbp;
|
|
struct fxp_cb_ias cb_ias;
|
|
struct fxp_cb_tx txp;
|
|
} sndbuf;
|
|
#define SNDBUF_PHYS vtophys(&sndbuf)
|
|
#define SNDBUF_VIRT ((void *)&sndbuf)
|
|
#else /* !standalone, userspace testing environment */
|
|
#define PCI_MODE1_ENABLE 0x80000000UL
|
|
static pcihdl_t mytag = PCI_MODE1_ENABLE | (PCIDEVNO << 11);
|
|
|
|
extern void *mapmem(int, int);
|
|
void *dmamem; /* virtual */
|
|
#define RECVBUF_PHYS DMABASE
|
|
#define RECVBUF_VIRT dmamem
|
|
#define SNDBUF_PHYS (DMABASE + RECVBUF_SIZE)
|
|
#define SNDBUF_VIRT ((void *)(((char *)dmamem) + RECVBUF_SIZE))
|
|
#endif /* _STANDALONE */
|
|
|
|
static void fxp_read_eeprom(uint16_t *, int, int);
|
|
static inline void fxp_scb_wait(void);
|
|
#ifdef DEBUG
|
|
static void fxp_checkintr(char *);
|
|
#else
|
|
#define fxp_checkintr(x)
|
|
#endif
|
|
static void fxp_startreceiver(void);
|
|
|
|
/*
|
|
* Template for default configuration parameters.
|
|
* See struct fxp_cb_config for the bit definitions.
|
|
*/
|
|
static uint8_t fxp_cb_config_template[] = {
|
|
0x0, 0x0, /* cb_status */
|
|
0x80, 0x2, /* cb_command */
|
|
0xff, 0xff, 0xff, 0xff, /* link_addr */
|
|
0x16, /* 0 */
|
|
0x8, /* 1 */
|
|
0x0, /* 2 */
|
|
0x0, /* 3 */
|
|
0x0, /* 4 */
|
|
0x80, /* 5 */
|
|
0xb2, /* 6 */
|
|
0x3, /* 7 */
|
|
0x1, /* 8 */
|
|
0x0, /* 9 */
|
|
0x26, /* 10 */
|
|
0x0, /* 11 */
|
|
0x60, /* 12 */
|
|
0x0, /* 13 */
|
|
0xf2, /* 14 */
|
|
0x48, /* 15 */
|
|
0x0, /* 16 */
|
|
0x40, /* 17 */
|
|
0xf3, /* 18 */
|
|
0x0, /* 19 */
|
|
0x3f, /* 20 */
|
|
0x5 /* 21 */
|
|
};
|
|
|
|
static int tx_threshold = 64; /* x8, max 192 */
|
|
|
|
#define CSR_READ_1(reg) inb(iobase + (reg))
|
|
#define CSR_READ_2(reg) inw(iobase + (reg))
|
|
#define CSR_WRITE_1(reg, val) outb(iobase + (reg), val)
|
|
#define CSR_WRITE_2(reg, val) outw(iobase + (reg), val)
|
|
#define CSR_WRITE_4(reg, val) outl(iobase + (reg), val)
|
|
#define DELAY(n) delay(n)
|
|
|
|
static int iobase;
|
|
|
|
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
|
|
static struct btinfo_netif bi_netif;
|
|
#endif
|
|
|
|
/*
|
|
* Wait for the previous command to be accepted (but not necessarily
|
|
* completed).
|
|
*/
|
|
static inline void
|
|
fxp_scb_wait(void)
|
|
{
|
|
int i = 10000;
|
|
|
|
while (CSR_READ_1(FXP_CSR_SCB_COMMAND) && --i)
|
|
DELAY(1);
|
|
if (i == 0)
|
|
printf("fxp: WARNING: SCB timed out!\n");
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void
|
|
fxp_checkintr(char *msg)
|
|
{
|
|
uint8_t statack;
|
|
int i = 10000;
|
|
|
|
do {
|
|
statack = CSR_READ_1(FXP_CSR_SCB_STATACK);
|
|
} while ((statack == 0) && (--i > 0));
|
|
|
|
if (statack != 0) {
|
|
CSR_WRITE_1(FXP_CSR_SCB_STATACK, statack);
|
|
printf("%s: ack'd irq %x, i=%d\n", msg, statack, i);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int
|
|
EtherInit(unsigned char *myadr)
|
|
{
|
|
#ifndef _STANDALONE
|
|
uint32_t id;
|
|
#endif
|
|
volatile struct fxp_cb_config *cbp;
|
|
volatile struct fxp_cb_ias *cb_ias;
|
|
int i;
|
|
|
|
if (pcicheck()) {
|
|
printf("pcicheck failed\n");
|
|
return 0;
|
|
}
|
|
#ifdef _STANDALONE
|
|
if (pcifinddev(0x8086, 0x1229, &mytag)) {
|
|
printf("no fxp\n");
|
|
return 0;
|
|
}
|
|
#else
|
|
pcicfgread(&mytag, 0, &id);
|
|
if (id != 0x12298086) {
|
|
printf("no fxp\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
pcicfgread(&mytag, FXP_PCI_IOBA, &iobase);
|
|
iobase &= ~3;
|
|
|
|
#ifndef _STANDALONE
|
|
dmamem = mapmem(DMABASE, DMASIZE);
|
|
if (!dmamem)
|
|
return 0;
|
|
#endif
|
|
|
|
fxp_read_eeprom((void *)myadr, 0, 3);
|
|
|
|
/*
|
|
* Initialize base of CBL and RFA memory. Loading with zero
|
|
* sets it up for regular linear addressing.
|
|
*/
|
|
CSR_WRITE_4(FXP_CSR_SCB_GENERAL, 0);
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_BASE);
|
|
|
|
fxp_scb_wait();
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_RU_BASE);
|
|
|
|
cbp = SNDBUF_VIRT;
|
|
/*
|
|
* This memcpy is kind of disgusting, but there are a bunch of must be
|
|
* zero and must be one bits in this structure and this is the easiest
|
|
* way to initialize them all to proper values.
|
|
*/
|
|
memcpy((void *)cbp, fxp_cb_config_template,
|
|
sizeof(fxp_cb_config_template));
|
|
|
|
#define prm 0
|
|
#define phy_10Mbps_only 0
|
|
#define all_mcasts 0
|
|
cbp->cb_status = 0;
|
|
cbp->cb_command = FXP_CB_COMMAND_CONFIG | FXP_CB_COMMAND_EL;
|
|
cbp->link_addr = -1; /* (no) next command */
|
|
cbp->byte_count = 22; /* (22) bytes to config */
|
|
cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */
|
|
cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */
|
|
cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */
|
|
cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */
|
|
cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */
|
|
cbp->dma_mbce = 0; /* (disable) dma max counters */
|
|
cbp->late_scb = 0; /* (don't) defer SCB update */
|
|
cbp->tno_int_or_tco_en = 0; /* (disable) tx not okay interrupt */
|
|
cbp->ci_int = 0; /* interrupt on CU not active */
|
|
cbp->save_bf = prm; /* save bad frames */
|
|
cbp->disc_short_rx = !prm; /* discard short packets */
|
|
cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */
|
|
cbp->mediatype = !phy_10Mbps_only; /* interface mode */
|
|
cbp->nsai = 1; /* (don't) disable source addr insert */
|
|
cbp->preamble_length = 2; /* (7 byte) preamble */
|
|
cbp->loopback = 0; /* (don't) loopback */
|
|
cbp->linear_priority = 0; /* (normal CSMA/CD operation) */
|
|
cbp->linear_pri_mode = 0; /* (wait after xmit only) */
|
|
cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */
|
|
cbp->promiscuous = prm; /* promiscuous mode */
|
|
cbp->bcast_disable = 0; /* (don't) disable broadcasts */
|
|
cbp->crscdt = 0; /* (CRS only) */
|
|
cbp->stripping = !prm; /* truncate rx packet to byte count */
|
|
cbp->padding = 1; /* (do) pad short tx packets */
|
|
cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */
|
|
cbp->force_fdx = 0; /* (don't) force full duplex */
|
|
cbp->fdx_pin_en = 1; /* (enable) FDX# pin */
|
|
cbp->multi_ia = 0; /* (don't) accept multiple IAs */
|
|
cbp->mc_all = all_mcasts;/* accept all multicasts */
|
|
#undef prm
|
|
#undef phy_10Mbps_only
|
|
#undef all_mcasts
|
|
|
|
/*
|
|
* Start the config command/DMA.
|
|
*/
|
|
fxp_scb_wait();
|
|
CSR_WRITE_4(FXP_CSR_SCB_GENERAL, SNDBUF_PHYS);
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
|
|
/* ...and wait for it to complete. */
|
|
i = 10000;
|
|
while (!(cbp->cb_status & FXP_CB_STATUS_C) && (--i > 0))
|
|
DELAY(1);
|
|
if (i == 0)
|
|
printf("config timeout");
|
|
|
|
fxp_checkintr("config");
|
|
|
|
cb_ias = SNDBUF_VIRT;
|
|
/*
|
|
* Now initialize the station address. Temporarily use the TxCB
|
|
* memory area like we did above for the config CB.
|
|
*/
|
|
cb_ias->cb_status = 0;
|
|
cb_ias->cb_command = FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL;
|
|
cb_ias->link_addr = -1;
|
|
memcpy((void *)cb_ias->macaddr, myadr, 6);
|
|
|
|
/*
|
|
* Start the IAS (Individual Address Setup) command/DMA.
|
|
*/
|
|
fxp_scb_wait();
|
|
/* address is still there */
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
|
|
/* ...and wait for it to complete. */
|
|
i = 10000;
|
|
while (!(cb_ias->cb_status & FXP_CB_STATUS_C) && (--i > 0))
|
|
DELAY(1);
|
|
if (i == 0)
|
|
printf("ias timeout");
|
|
|
|
fxp_checkintr("ias");
|
|
|
|
fxp_startreceiver();
|
|
|
|
#if defined(_STANDALONE) && !defined(SUPPORT_NO_NETBSD)
|
|
strncpy(bi_netif.ifname, "fxp", sizeof(bi_netif.ifname));
|
|
bi_netif.bus = BI_BUS_PCI;
|
|
bi_netif.addr.tag = mytag;
|
|
|
|
BI_ADD(&bi_netif, BTINFO_NETIF, sizeof(bi_netif));
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
EtherStop(void)
|
|
{
|
|
|
|
/*
|
|
* Issue software reset
|
|
*/
|
|
CSR_WRITE_4(FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
|
|
DELAY(10);
|
|
}
|
|
|
|
int
|
|
EtherSend(char *pkt, int len)
|
|
{
|
|
volatile struct fxp_cb_tx *txp;
|
|
#ifdef _STANDALONE
|
|
static volatile struct fxp_tbd tbd;
|
|
#endif
|
|
volatile struct fxp_tbd *tbdp;
|
|
int i;
|
|
|
|
txp = SNDBUF_VIRT;
|
|
#ifdef _STANDALONE
|
|
tbdp = &tbd;
|
|
txp->tbd_array_addr = vtophys((void *)&tbd);
|
|
tbdp->tb_addr = vtophys(pkt);
|
|
#else
|
|
/* XXX assuming we send at max 400 bytes */
|
|
tbdp = (struct fxp_tbd *)(SNDBUF_VIRT + 440);
|
|
txp->tbd_array_addr = SNDBUF_PHYS + 440;
|
|
memcpy(SNDBUF_VIRT + 400, pkt, len);
|
|
tbdp->tb_addr = SNDBUF_PHYS + 400;
|
|
#endif
|
|
tbdp->tb_size = len;
|
|
txp->tbd_number = 1;
|
|
txp->cb_status = 0;
|
|
txp->cb_command =
|
|
FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF | FXP_CB_COMMAND_EL;
|
|
txp->tx_threshold = tx_threshold;
|
|
|
|
txp->link_addr = -1;
|
|
txp->byte_count = 0;
|
|
|
|
fxp_scb_wait();
|
|
CSR_WRITE_4(FXP_CSR_SCB_GENERAL, SNDBUF_PHYS);
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_CU_START);
|
|
/* ...and wait for it to complete. */
|
|
i = 10000;
|
|
while (!(txp->cb_status & FXP_CB_STATUS_C) && (--i > 0))
|
|
DELAY(1);
|
|
if (i == 0)
|
|
printf("send timeout");
|
|
|
|
fxp_checkintr("send");
|
|
|
|
return len;
|
|
}
|
|
|
|
static void
|
|
fxp_startreceiver(void)
|
|
{
|
|
volatile struct fxp_rfa *rfa;
|
|
uint32_t v;
|
|
|
|
rfa = RECVBUF_VIRT;
|
|
rfa->size = RECVBUF_SIZE - sizeof(struct fxp_rfa);
|
|
rfa->rfa_status = 0;
|
|
rfa->rfa_control = FXP_RFA_CONTROL_S;
|
|
rfa->actual_size = 0;
|
|
v = RECVBUF_PHYS; /* close the "ring" */
|
|
memcpy((void *)&rfa->link_addr, &v, sizeof(v));
|
|
v = -1;
|
|
memcpy((void *)&rfa->rbd_addr, &v, sizeof(v));
|
|
|
|
fxp_scb_wait();
|
|
CSR_WRITE_4(FXP_CSR_SCB_GENERAL, RECVBUF_PHYS);
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_RU_START);
|
|
}
|
|
|
|
int
|
|
EtherReceive(char *pkt, int maxlen)
|
|
{
|
|
uint8_t ruscus;
|
|
volatile struct fxp_rfa *rfa;
|
|
int len = 0;
|
|
|
|
ruscus = CSR_READ_1(FXP_CSR_SCB_RUSCUS);
|
|
if (((ruscus >> 2) & 0x0f) == FXP_SCB_RUS_READY)
|
|
return 0;
|
|
if (((ruscus >> 2) & 0x0f) != FXP_SCB_RUS_SUSPENDED) {
|
|
printf("rcv: ruscus=%x\n", ruscus);
|
|
return 0;
|
|
}
|
|
|
|
rfa = RECVBUF_VIRT;
|
|
if (rfa->rfa_status & FXP_RFA_STATUS_C) {
|
|
len = rfa->actual_size & 0x7ff;
|
|
if (len <= maxlen) {
|
|
memcpy(pkt, (char *) rfa + RFA_SIZE, maxlen);
|
|
#if 0
|
|
printf("rfa status=%x, len=%x\n",
|
|
rfa->rfa_status, len);
|
|
#endif
|
|
} else
|
|
len = 0;
|
|
}
|
|
|
|
fxp_scb_wait();
|
|
CSR_WRITE_1(FXP_CSR_SCB_COMMAND, FXP_SCB_COMMAND_RU_RESUME);
|
|
|
|
return len;
|
|
}
|
|
|
|
/*
|
|
* Read from the serial EEPROM. Basically, you manually shift in
|
|
* the read opcode (one bit at a time) and then shift in the address,
|
|
* and then you shift out the data (all of this one bit at a time).
|
|
* The word size is 16 bits, so you have to provide the address for
|
|
* every 16 bits of data.
|
|
*/
|
|
static void
|
|
fxp_read_eeprom(uint16_t *data, int offset, int words)
|
|
{
|
|
uint16_t reg;
|
|
int i, x;
|
|
|
|
for (i = 0; i < words; i++) {
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
|
|
/*
|
|
* Shift in read opcode.
|
|
*/
|
|
for (x = 3; x > 0; x--) {
|
|
if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) {
|
|
reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
|
|
} else {
|
|
reg = FXP_EEPROM_EECS;
|
|
}
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, reg);
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL,
|
|
reg | FXP_EEPROM_EESK);
|
|
DELAY(1);
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, reg);
|
|
DELAY(1);
|
|
}
|
|
/*
|
|
* Shift in address.
|
|
*/
|
|
for (x = 6; x > 0; x--) {
|
|
if ((i + offset) & (1 << (x - 1))) {
|
|
reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
|
|
} else {
|
|
reg = FXP_EEPROM_EECS;
|
|
}
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, reg);
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL,
|
|
reg | FXP_EEPROM_EESK);
|
|
DELAY(1);
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, reg);
|
|
DELAY(1);
|
|
}
|
|
reg = FXP_EEPROM_EECS;
|
|
data[i] = 0;
|
|
/*
|
|
* Shift out data.
|
|
*/
|
|
for (x = 16; x > 0; x--) {
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL,
|
|
reg | FXP_EEPROM_EESK);
|
|
DELAY(1);
|
|
if (CSR_READ_2(FXP_CSR_EEPROMCONTROL) &
|
|
FXP_EEPROM_EEDO)
|
|
data[i] |= (1 << (x - 1));
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, reg);
|
|
DELAY(1);
|
|
}
|
|
CSR_WRITE_2(FXP_CSR_EEPROMCONTROL, 0);
|
|
DELAY(1);
|
|
}
|
|
}
|