ba49a155b5
This patch introduces a framebuffer to Minix. It's written for the ARM port of Minix, but has an architectural split that separates the hardware dependent part from the non-hardware dependent part. Futhermore, this driver was developed using a screen that has a native resolution of 1024x600 pixels and having lack of support for obtaining EDID from the screen. Consequently, it uses a hardcoded resolution of 1024x600. The driver uses an interface based on the Linux ioctl API, but supports only a very limited subset.
271 lines
7.1 KiB
C
271 lines
7.1 KiB
C
/* Architecture dependent part for the framebuffer on the OMAP3. Since we don't
|
|
* have support for EDID (which requires support for i2c, also something we
|
|
* don't have, yet), but we do have a screen with 1024*600 resolution for our
|
|
* testing purposes, we hardcode that resolution here. There's obvious room for
|
|
* improvement. */
|
|
|
|
#include <minix/chardriver.h>
|
|
#include <minix/drivers.h>
|
|
#include <minix/fb.h>
|
|
#include <minix/type.h>
|
|
#include <minix/vm.h>
|
|
#include <assert.h>
|
|
#include <sys/mman.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include "dss.h"
|
|
#define SCREEN_WIDTH 1024
|
|
#define SCREEN_HEIGHT 600
|
|
#define PAGES_NR 2
|
|
|
|
static vir_bytes dss_phys_base; /* Address of dss phys memory map */
|
|
static vir_bytes dispc_phys_base; /* Address of dispc phys memory map */
|
|
static vir_bytes fb_vir;
|
|
static phys_bytes fb_phys;
|
|
static size_t fb_size;
|
|
static int initialized = 0;
|
|
|
|
struct panel_config {
|
|
u32_t timing_h;
|
|
u32_t timing_v;
|
|
u32_t pol_freq;
|
|
u32_t divisor;
|
|
u32_t lcd_size;
|
|
u32_t panel_type;
|
|
u32_t data_lines;
|
|
u32_t load_mode;
|
|
u32_t panel_color;
|
|
};
|
|
|
|
static const struct panel_config default_cfg = {
|
|
/* See OMAP TRM section 15.7 for the register values/encoding */
|
|
.timing_h = 0x1a4024c9, /* Horizontal timing */
|
|
.timing_v = 0x02c00509, /* Vertical timing */
|
|
.pol_freq = 0x00007028, /* Pol Freq */
|
|
.divisor = 0x00010001, /* 96MHz Pixel Clock */
|
|
.lcd_size = ((SCREEN_HEIGHT - 1) << 16 | (SCREEN_WIDTH - 1)),
|
|
.panel_type = 0x01, /* TFT */
|
|
.data_lines = 0x03, /* 24 Bit RGB */
|
|
.load_mode = 0x02, /* Frame Mode */
|
|
.panel_color = 0xFFFFFF /* WHITE */
|
|
};
|
|
|
|
static const struct fb_fix_screeninfo fbfs = {
|
|
.xpanstep = 0,
|
|
.ypanstep = 0,
|
|
.ywrapstep = 0,
|
|
.line_length = SCREEN_WIDTH * 4,
|
|
.mmio_start = 0, /* Not implemented for char. special, so */
|
|
.mmio_len = 0 /* these are set to 0 */
|
|
};
|
|
|
|
static struct fb_var_screeninfo fbvs = {
|
|
.xres = SCREEN_WIDTH,
|
|
.yres = SCREEN_HEIGHT,
|
|
.xres_virtual = SCREEN_WIDTH,
|
|
.yres_virtual = SCREEN_HEIGHT*2,
|
|
.xoffset = 0,
|
|
.yoffset = 0,
|
|
.bits_per_pixel = 32,
|
|
.red = {
|
|
.offset = 16,
|
|
.length = 8,
|
|
.msb_right = 0
|
|
},
|
|
.green = {
|
|
.offset = 8,
|
|
.length = 8,
|
|
.msb_right = 0
|
|
},
|
|
.blue = {
|
|
.offset = 0,
|
|
.length = 8,
|
|
.msb_right = 0
|
|
},
|
|
.transp = {
|
|
.offset = 24,
|
|
.length = 8,
|
|
.msb_right = 0
|
|
}
|
|
};
|
|
|
|
static inline u32_t
|
|
readw(vir_bytes addr)
|
|
{
|
|
return *((volatile u32_t *) addr);
|
|
}
|
|
|
|
static inline void
|
|
writew(vir_bytes addr, u32_t val)
|
|
{
|
|
*((volatile u32_t *) addr) = val;
|
|
}
|
|
|
|
static void
|
|
arch_configure_display(int minor)
|
|
{
|
|
/* Tell hardware where frame buffer is and turn display on */
|
|
u32_t off, rdispc;
|
|
|
|
if (!initialized) return;
|
|
if (minor != 0) return;
|
|
|
|
off = fbvs.yoffset * fbvs.xres_virtual * (fbvs.bits_per_pixel/8);
|
|
|
|
writew((vir_bytes) OMAP3_DISPC_GFX_BA0(dispc_phys_base),
|
|
fb_phys + (phys_bytes) off);
|
|
rdispc = readw((vir_bytes) OMAP3_DISPC_CONTROL(dispc_phys_base));
|
|
rdispc |= DISPC_LCDENABLE | DISPC_DIGITALENABLE | DISPC_GOLCD |
|
|
DISPC_GODIGITAL | DISPC_GPOUT0 | DISPC_GPOUT1;
|
|
writew((vir_bytes) OMAP3_DISPC_CONTROL(dispc_phys_base), rdispc);
|
|
}
|
|
|
|
int
|
|
arch_get_device(int minor, struct device *dev)
|
|
{
|
|
if (!initialized) return ENXIO;
|
|
if (minor != 0) return ENXIO;
|
|
dev->dv_base = fb_vir;
|
|
dev->dv_size = fb_size;
|
|
return OK;
|
|
}
|
|
|
|
int
|
|
arch_get_varscreeninfo(int minor, struct fb_var_screeninfo *fbvsp)
|
|
{
|
|
if (!initialized) return ENXIO;
|
|
if (minor != 0) return ENXIO;
|
|
|
|
*fbvsp = fbvs;
|
|
return OK;
|
|
}
|
|
|
|
int
|
|
arch_put_varscreeninfo(int minor, struct fb_var_screeninfo *fbvsp)
|
|
{
|
|
int r = OK;
|
|
|
|
assert(fbvsp != NULL);
|
|
|
|
if (!initialized) return ENXIO;
|
|
if (minor != 0) return ENXIO;
|
|
|
|
/* For now we only allow to play with the yoffset setting */
|
|
if (fbvsp->yoffset != fbvs.yoffset) {
|
|
if (fbvsp->yoffset < 0 || fbvsp->yoffset > fbvs.yres) {
|
|
return EINVAL;
|
|
}
|
|
|
|
fbvs.yoffset = fbvsp->yoffset;
|
|
}
|
|
|
|
/* Now update hardware with new settings */
|
|
arch_configure_display(minor);
|
|
return OK;
|
|
}
|
|
|
|
int
|
|
arch_get_fixscreeninfo(int minor, struct fb_fix_screeninfo *fbfsp)
|
|
{
|
|
if (!initialized) return ENXIO;
|
|
if (minor != 0) return ENXIO;
|
|
|
|
*fbfsp = fbfs;
|
|
return OK;
|
|
}
|
|
|
|
int
|
|
arch_pan_display(int minor, struct fb_var_screeninfo *fbvsp)
|
|
{
|
|
return arch_put_varscreeninfo(minor, fbvsp);
|
|
}
|
|
|
|
int
|
|
arch_fb_init(int minor, struct device *dev)
|
|
{
|
|
u32_t rdispc;
|
|
struct minix_mem_range mr;
|
|
|
|
const struct panel_config *panel_cfg = &default_cfg;
|
|
|
|
assert(dev != NULL);
|
|
if (minor != 0) return ENXIO; /* We support only one minor */
|
|
|
|
if (initialized) {
|
|
dev->dv_base = fb_vir;
|
|
dev->dv_size = fb_size;
|
|
return OK;
|
|
}
|
|
|
|
initialized = 1;
|
|
|
|
/* Configure DSS memory access */
|
|
mr.mr_base = OMAP3_DSS_BASE;
|
|
mr.mr_limit = mr.mr_base + 0x60;
|
|
if (sys_privctl(SELF, SYS_PRIV_ADD_MEM, &mr) != OK) {
|
|
panic("Unable to request access to DSS(1) memory");
|
|
}
|
|
|
|
dss_phys_base = (vir_bytes) vm_map_phys(SELF, (void *) OMAP3_DSS_BASE,
|
|
0x60);
|
|
|
|
if (dss_phys_base == (vir_bytes) MAP_FAILED) {
|
|
panic("Unable to request access to DSS(2) memory");
|
|
}
|
|
|
|
/* Configure DISPC memory access */
|
|
mr.mr_base = OMAP3_DISPC_BASE;
|
|
mr.mr_limit = mr.mr_base + 0x430;
|
|
if (sys_privctl(SELF, SYS_PRIV_ADD_MEM, &mr) != OK) {
|
|
panic("Unable to request access to DISPC(1) memory");
|
|
}
|
|
dispc_phys_base = (vir_bytes) vm_map_phys(SELF,
|
|
(void *) OMAP3_DISPC_BASE,
|
|
0x430);
|
|
|
|
if (dispc_phys_base == (vir_bytes) MAP_FAILED) {
|
|
panic("Unable to request access to DISPC(2) memory");
|
|
}
|
|
|
|
/* Set timings, screen mode, screen size, etc. */
|
|
writew(OMAP3_DISPC_TIMINGH(dispc_phys_base), panel_cfg->timing_h);
|
|
writew(OMAP3_DISPC_TIMINGV(dispc_phys_base), panel_cfg->timing_v);
|
|
writew(OMAP3_DISPC_POL_FREQ(dispc_phys_base), panel_cfg->pol_freq);
|
|
writew(OMAP3_DISPC_DIVISOR(dispc_phys_base), panel_cfg->divisor);
|
|
writew(OMAP3_DISPC_CONFIG(dispc_phys_base),
|
|
panel_cfg->load_mode << LOADMODE_SHIFT);
|
|
writew(OMAP3_DISPC_CONTROL(dispc_phys_base),
|
|
panel_cfg->panel_type << TFTSTN_SHIFT |
|
|
panel_cfg->data_lines << DATALINES_SHIFT);
|
|
|
|
writew((vir_bytes) OMAP3_DISPC_SIZE_LCD(dispc_phys_base),
|
|
panel_cfg->lcd_size);
|
|
writew((vir_bytes) OMAP3_DISPC_GFX_SIZE(dispc_phys_base),
|
|
panel_cfg->lcd_size);
|
|
writew(OMAP3_DISPC_DEFAULT_COLOR0(dispc_phys_base),
|
|
panel_cfg->panel_color);
|
|
|
|
/* Enable gfx engine */
|
|
writew(OMAP3_DISPC_GFX_ATTRIBUTES(dispc_phys_base),
|
|
(DISPC_GFXBURSTSIZE_16 << GFXBURSTSIZE_SHIFT) |
|
|
(DISPC_GFXFORMAT_RGB24 << GFXFORMAT_SHIFT) |
|
|
(DISPC_GFXENABLE));
|
|
writew(OMAP3_DISPC_GFX_ROW_INC(dispc_phys_base), 1);
|
|
writew(OMAP3_DISPC_GFX_PIXEL_INC(dispc_phys_base), 1);
|
|
|
|
/* Allocate contiguous physical memory for the display buffer */
|
|
fb_size = fbvs.yres_virtual * fbvs.xres_virtual *
|
|
(fbvs.bits_per_pixel / 8);
|
|
fb_vir = (vir_bytes) alloc_contig(fb_size, 0, &fb_phys);
|
|
if (fb_vir == (vir_bytes) MAP_FAILED) {
|
|
panic("Unable to allocate contiguous memory\n");
|
|
}
|
|
dev->dv_base = fb_vir;
|
|
dev->dv_size = fb_size;
|
|
|
|
/* Configure buffer settings and turn on LCD/Digital */
|
|
arch_configure_display(minor);
|
|
|
|
return OK;
|
|
}
|
|
|