minix/sys/ufs/ufs/dinode.h
Lionel Sambuc 84d9c625bf Synchronize on NetBSD-CVS (2013/12/1 12:00:00 UTC)
- Fix for possible unset uid/gid in toproto
 - Fix for default mtree style
 - Update libelf
 - Importing libexecinfo
 - Resynchronize GCC, mpc, gmp, mpfr
 - build.sh: Replace params with show-params.
     This has been done as the make target has been renamed in the same
     way, while a new target named params has been added. This new
     target generates a file containing all the parameters, instead of
     printing it on the console.
 - Update test48 with new etc/services (Fix by Ben Gras <ben@minix3.org)
     get getservbyport() out of the inner loop

Change-Id: Ie6ad5226fa2621ff9f0dee8782ea48f9443d2091
2014-07-28 17:05:06 +02:00

177 lines
7.4 KiB
C

/* $NetBSD: dinode.h,v 1.24 2013/06/09 17:55:46 dholland Exp $ */
/*
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Marshall
* Kirk McKusick and Network Associates Laboratories, the Security
* Research Division of Network Associates, Inc. under DARPA/SPAWAR
* contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
* research program
*
* Copyright (c) 1982, 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dinode.h 8.9 (Berkeley) 3/29/95
*/
/*
* NOTE: COORDINATE ON-DISK FORMAT CHANGES WITH THE FREEBSD PROJECT.
*/
#ifndef _UFS_UFS_DINODE_H_
#define _UFS_UFS_DINODE_H_
/*
* The root inode is the root of the file system. Inode 0 can't be used for
* normal purposes and historically bad blocks were linked to inode 1, thus
* the root inode is 2. (Inode 1 is no longer used for this purpose, however
* numerous dump tapes make this assumption, so we are stuck with it).
*/
#define UFS_ROOTINO ((ino_t)2)
/*
* The Whiteout inode# is a dummy non-zero inode number which will
* never be allocated to a real file. It is used as a place holder
* in the directory entry which has been tagged as a DT_W entry.
* See the comments about UFS_ROOTINO above.
*/
#define UFS_WINO ((ino_t)1)
/*
* A dinode contains all the meta-data associated with a UFS file.
* This structure defines the on-disk format of a dinode. Since
* this structure describes an on-disk structure, all its fields
* are defined by types with precise widths.
*/
#define UFS_NXADDR 2
#define UFS_NDADDR 12 /* Direct addresses in inode. */
#define UFS_NIADDR 3 /* Indirect addresses in inode. */
struct ufs1_dinode {
u_int16_t di_mode; /* 0: IFMT, permissions; see below. */
int16_t di_nlink; /* 2: File link count. */
u_int16_t di_oldids[2]; /* 4: Ffs: old user and group ids. */
u_int64_t di_size; /* 8: File byte count. */
int32_t di_atime; /* 16: Last access time. */
int32_t di_atimensec; /* 20: Last access time. */
int32_t di_mtime; /* 24: Last modified time. */
int32_t di_mtimensec; /* 28: Last modified time. */
int32_t di_ctime; /* 32: Last inode change time. */
int32_t di_ctimensec; /* 36: Last inode change time. */
int32_t di_db[UFS_NDADDR]; /* 40: Direct disk blocks. */
int32_t di_ib[UFS_NIADDR]; /* 88: Indirect disk blocks. */
u_int32_t di_flags; /* 100: Status flags (chflags). */
u_int32_t di_blocks; /* 104: Blocks actually held. */
int32_t di_gen; /* 108: Generation number. */
u_int32_t di_uid; /* 112: File owner. */
u_int32_t di_gid; /* 116: File group. */
u_int64_t di_modrev; /* 120: i_modrev for NFSv4 */
};
struct ufs2_dinode {
u_int16_t di_mode; /* 0: IFMT, permissions; see below. */
int16_t di_nlink; /* 2: File link count. */
u_int32_t di_uid; /* 4: File owner. */
u_int32_t di_gid; /* 8: File group. */
u_int32_t di_blksize; /* 12: Inode blocksize. */
u_int64_t di_size; /* 16: File byte count. */
u_int64_t di_blocks; /* 24: Bytes actually held. */
int64_t di_atime; /* 32: Last access time. */
int64_t di_mtime; /* 40: Last modified time. */
int64_t di_ctime; /* 48: Last inode change time. */
int64_t di_birthtime; /* 56: Inode creation time. */
int32_t di_mtimensec; /* 64: Last modified time. */
int32_t di_atimensec; /* 68: Last access time. */
int32_t di_ctimensec; /* 72: Last inode change time. */
int32_t di_birthnsec; /* 76: Inode creation time. */
int32_t di_gen; /* 80: Generation number. */
u_int32_t di_kernflags; /* 84: Kernel flags. */
u_int32_t di_flags; /* 88: Status flags (chflags). */
int32_t di_extsize; /* 92: External attributes block. */
int64_t di_extb[UFS_NXADDR];/* 96: External attributes block. */
int64_t di_db[UFS_NDADDR]; /* 112: Direct disk blocks. */
int64_t di_ib[UFS_NIADDR]; /* 208: Indirect disk blocks. */
u_int64_t di_modrev; /* 232: i_modrev for NFSv4 */
int64_t di_spare[2]; /* 240: Reserved; currently unused */
};
/*
* The di_db fields may be overlaid with other information for
* file types that do not have associated disk storage. Block
* and character devices overlay the first data block with their
* dev_t value. Short symbolic links place their path in the
* di_db area.
*/
#define di_ogid di_oldids[1]
#define di_ouid di_oldids[0]
#define di_rdev di_db[0]
#define UFS1_MAXSYMLINKLEN ((UFS_NDADDR + UFS_NIADDR) * sizeof(int32_t))
#define UFS2_MAXSYMLINKLEN ((UFS_NDADDR + UFS_NIADDR) * sizeof(int64_t))
#define UFS_MAXSYMLINKLEN(ip) \
((ip)->i_ump->um_fstype == UFS1) ? \
UFS1_MAXSYMLINKLEN : UFS2_MAXSYMLINKLEN
/* NeXT used to keep short symlinks in the inode even when using
* FS_42INODEFMT. In that case fs->fs_maxsymlinklen is probably -1,
* but short symlinks were stored in inodes shorter than this:
*/
#define APPLEUFS_MAXSYMLINKLEN 60
/* File permissions. */
#define IEXEC 0000100 /* Executable. */
#define IWRITE 0000200 /* Writable. */
#define IREAD 0000400 /* Readable. */
#define ISVTX 0001000 /* Sticky bit. */
#define ISGID 0002000 /* Set-gid. */
#define ISUID 0004000 /* Set-uid. */
/* File types. */
#define IFMT 0170000 /* Mask of file type. */
#define IFIFO 0010000 /* Named pipe (fifo). */
#define IFCHR 0020000 /* Character device. */
#define IFDIR 0040000 /* Directory file. */
#define IFBLK 0060000 /* Block device. */
#define IFREG 0100000 /* Regular file. */
#define IFLNK 0120000 /* Symbolic link. */
#define IFSOCK 0140000 /* UNIX domain socket. */
#define IFWHT 0160000 /* Whiteout. */
/* Size of the on-disk inode. */
#define DINODE1_SIZE (sizeof(struct ufs1_dinode)) /* 128 */
#define DINODE2_SIZE (sizeof(struct ufs2_dinode))
#endif /* !_UFS_UFS_DINODE_H_ */