minix/sys/sys/param.h
Lionel Sambuc 84d9c625bf Synchronize on NetBSD-CVS (2013/12/1 12:00:00 UTC)
- Fix for possible unset uid/gid in toproto
 - Fix for default mtree style
 - Update libelf
 - Importing libexecinfo
 - Resynchronize GCC, mpc, gmp, mpfr
 - build.sh: Replace params with show-params.
     This has been done as the make target has been renamed in the same
     way, while a new target named params has been added. This new
     target generates a file containing all the parameters, instead of
     printing it on the console.
 - Update test48 with new etc/services (Fix by Ben Gras <ben@minix3.org)
     get getservbyport() out of the inner loop

Change-Id: Ie6ad5226fa2621ff9f0dee8782ea48f9443d2091
2014-07-28 17:05:06 +02:00

475 lines
15 KiB
C

/* $NetBSD: param.h,v 1.437 2013/11/25 03:03:41 christos Exp $ */
/*-
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)param.h 8.3 (Berkeley) 4/4/95
*/
#ifndef _SYS_PARAM_H_
#define _SYS_PARAM_H_
/*
* Historic BSD #defines -- probably will remain untouched for all time.
*/
#define BSD 199506 /* System version (year & month). */
#define BSD4_3 1
#define BSD4_4 1
/*
* #define __NetBSD_Version__ MMmmrrpp00
*
* M = major version
* m = minor version; a minor number of 99 indicates current.
* r = 0 (*)
* p = patchlevel
*
* When new releases are made, src/gnu/usr.bin/groff/tmac/mdoc.local
* needs to be updated and the changes sent back to the groff maintainers.
*
* (*) Up to 2.0I "release" used to be "",A-Z,Z[A-Z] but numeric
* e.g. NetBSD-1.2D = 102040000 ('D' == 4)
* NetBSD-2.0H (200080000) was changed on 20041001 to:
* 2.99.9 (299000900)
*/
#define __NetBSD_Version__ 699002800 /* NetBSD 6.99.28 */
#define __NetBSD_Prereq__(M,m,p) (((((M) * 100000000) + \
(m) * 1000000) + (p) * 100) <= __NetBSD_Version__)
/*
* Historical NetBSD #define
*
* NetBSD 1.4 was the last release for which this value was incremented.
* The value is now permanently fixed at 199905. It will never be
* changed again.
*
* New code must use __NetBSD_Version__ instead, and should not even
* count on NetBSD being defined.
*
*/
#define NetBSD 199905 /* NetBSD version (year & month). */
/*
* There macros determine if we are running in protected mode or not.
* _HARDKERNEL: code uses kernel namespace and runs in hw priviledged mode
* _SOFTKERNEL: code uses kernel namespace but runs without hw priviledges
*/
#if defined(_KERNEL) && !defined(_RUMPKERNEL)
#define _HARDKERNEL
#endif
#if defined(_KERNEL) && defined(_RUMPKERNEL)
#define _SOFTKERNEL
#endif
#include <sys/null.h>
#ifndef __ASSEMBLER__
#include <sys/inttypes.h>
#include <sys/types.h>
/*
* Machine-independent constants (some used in following include files).
* Redefined constants are from POSIX 1003.1 limits file.
*
* MAXCOMLEN should be >= sizeof(ac_comm) (see <acct.h>)
* MAXHOSTNAMELEN should be >= (_POSIX_HOST_NAME_MAX + 1) (see <limits.h>)
* MAXLOGNAME should be >= UT_NAMESIZE (see <utmp.h>)
*/
#include <sys/syslimits.h>
#define MAXCOMLEN 16 /* max command name remembered */
#define MAXINTERP PATH_MAX /* max interpreter file name length */
/* DEPRECATED: use LOGIN_NAME_MAX instead. */
#define MAXLOGNAME (LOGIN_NAME_MAX - 1) /* max login name length */
#define NCARGS ARG_MAX /* max bytes for an exec function */
#define NGROUPS NGROUPS_MAX /* max number groups */
#define NOGROUP 65535 /* marker for empty group set member */
#define MAXHOSTNAMELEN 256 /* max hostname size */
#ifndef NOFILE
#define NOFILE OPEN_MAX /* max open files per process */
#endif
#ifndef MAXUPRC /* max simultaneous processes */
#define MAXUPRC CHILD_MAX /* POSIX 1003.1-compliant default */
#else
#if (MAXUPRC - 0) < CHILD_MAX
#error MAXUPRC less than CHILD_MAX. See options(4) for details.
#endif /* (MAXUPRC - 0) < CHILD_MAX */
#endif /* !defined(MAXUPRC) */
/* More types and definitions used throughout the kernel. */
#ifdef _KERNEL
#include <sys/cdefs.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/ucred.h>
#include <sys/uio.h>
#include <uvm/uvm_param.h>
#ifndef NPROC
#define NPROC (20 + 16 * MAXUSERS)
#endif
#ifndef NTEXT
#define NTEXT (80 + NPROC / 8) /* actually the object cache */
#endif
#ifndef NVNODE
#define NVNODE (NPROC + NTEXT + 100)
#define NVNODE_IMPLICIT
#endif
#ifndef VNODE_KMEM_MAXPCT
#define VNODE_KMEM_MAXPCT 60
#endif
#ifndef BUFCACHE_VA_MAXPCT
#define BUFCACHE_VA_MAXPCT 20
#endif
#define VNODE_COST 2048 /* assumed space in bytes */
#endif /* _KERNEL */
/* Signals. */
#include <sys/signal.h>
/* Machine type dependent parameters. */
#include <machine/param.h>
#include <machine/limits.h>
/* pages ("clicks") to disk blocks */
#define ctod(x) ((x) << (PGSHIFT - DEV_BSHIFT))
#define dtoc(x) ((x) >> (PGSHIFT - DEV_BSHIFT))
/* bytes to pages */
#define ctob(x) ((x) << PGSHIFT)
#define btoc(x) (((x) + PGOFSET) >> PGSHIFT)
/* bytes to disk blocks */
#define dbtob(x) ((x) << DEV_BSHIFT)
#define btodb(x) ((x) >> DEV_BSHIFT)
#ifndef COHERENCY_UNIT
#define COHERENCY_UNIT 64
#endif
#ifndef CACHE_LINE_SIZE
#define CACHE_LINE_SIZE 64
#endif
#ifndef MAXCPUS
#define MAXCPUS 32
#endif
#ifndef MAX_LWP_PER_PROC
#define MAX_LWP_PER_PROC 8000
#endif
/*
* Stack macros. On most architectures, the stack grows down,
* towards lower addresses; it is the rare architecture where
* it grows up, towards higher addresses.
*
* STACK_GROW and STACK_SHRINK adjust a stack pointer by some
* size, no questions asked. STACK_ALIGN aligns a stack pointer.
*
* STACK_ALLOC returns a pointer to allocated stack space of
* some size; given such a pointer and a size, STACK_MAX gives
* the maximum (in the "maxsaddr" sense) stack address of the
* allocated memory.
*/
#if defined(_KERNEL) || defined(__EXPOSE_STACK)
#ifndef STACK_ALIGNBYTES
#define STACK_ALIGNBYTES __ALIGNBYTES
#endif
#ifdef __MACHINE_STACK_GROWS_UP
#define STACK_GROW(sp, _size) (((char *)(void *)(sp)) + (_size))
#define STACK_SHRINK(sp, _size) (((char *)(void *)(sp)) - (_size))
#define STACK_ALIGN(sp, bytes) \
((char *)((((unsigned long)(sp)) + (bytes)) & ~(bytes)))
#define STACK_ALLOC(sp, _size) ((char *)(void *)(sp))
#define STACK_MAX(p, _size) (((char *)(void *)(p)) + (_size))
#else
#define STACK_GROW(sp, _size) (((char *)(void *)(sp)) - (_size))
#define STACK_SHRINK(sp, _size) (((char *)(void *)(sp)) + (_size))
#define STACK_ALIGN(sp, bytes) \
((char *)(((unsigned long)(sp)) & ~(bytes)))
#define STACK_ALLOC(sp, _size) (((char *)(void *)(sp)) - (_size))
#define STACK_MAX(p, _size) ((char *)(void *)(p))
#endif
#define STACK_LEN_ALIGN(len, bytes) (((len) + (bytes)) & ~(bytes))
#endif /* defined(_KERNEL) || defined(__EXPOSE_STACK) */
/*
* Round p (pointer or byte index) up to a correctly-aligned value for all
* data types (int, long, ...). The result is u_int and must be cast to
* any desired pointer type.
*
* ALIGNED_POINTER is a boolean macro that checks whether an address
* is valid to fetch data elements of type t from on this architecture.
* This does not reflect the optimal alignment, just the possibility
* (within reasonable limits).
*
*/
#define ALIGNBYTES __ALIGNBYTES
#ifndef ALIGN
#define ALIGN(p) (((uintptr_t)(p) + ALIGNBYTES) & ~ALIGNBYTES)
#endif
#ifndef ALIGNED_POINTER
#define ALIGNED_POINTER(p,t) ((((uintptr_t)(p)) & (sizeof(t) - 1)) == 0)
#endif
/*
* Historic priority levels. These are meaningless and remain only
* for source compatibility. Do not use in new code.
*/
#define PSWP 0
#define PVM 4
#define PINOD 8
#define PRIBIO 16
#define PVFS 20
#define PZERO 22
#define PSOCK 24
#define PWAIT 32
#define PLOCK 36
#define PPAUSE 40
#define PUSER 50
#define MAXPRI 127
#define PCATCH 0x100 /* OR'd with pri for tsleep to check signals */
#define PNORELOCK 0x200 /* OR'd with pri for tsleep to not relock */
/*
* New priority levels.
*/
#define PRI_COUNT 224
#define PRI_NONE (-1)
#define PRI_KERNEL_RT 192
#define NPRI_KERNEL_RT 32
#define MAXPRI_KERNEL_RT (PRI_KERNEL_RT + NPRI_KERNEL_RT - 1)
#define PRI_USER_RT 128
#define NPRI_USER_RT 64
#define MAXPRI_USER_RT (PRI_USER_RT + NPRI_USER_RT - 1)
#define PRI_KTHREAD 96
#define NPRI_KTHREAD 32
#define MAXPRI_KTHREAD (PRI_KTHREAD + NPRI_KTHREAD - 1)
#define PRI_KERNEL 64
#define NPRI_KERNEL 32
#define MAXPRI_KERNEL (PRI_KERNEL + NPRI_KERNEL - 1)
#define PRI_USER 0
#define NPRI_USER 64
#define MAXPRI_USER (PRI_USER + NPRI_USER - 1)
/* Priority range used by POSIX real-time features */
#define SCHED_PRI_MIN 0
#define SCHED_PRI_MAX 63
/*
* Kernel thread priorities.
*/
#define PRI_SOFTSERIAL MAXPRI_KERNEL_RT
#define PRI_SOFTNET (MAXPRI_KERNEL_RT - schedppq * 1)
#define PRI_SOFTBIO (MAXPRI_KERNEL_RT - schedppq * 2)
#define PRI_SOFTCLOCK (MAXPRI_KERNEL_RT - schedppq * 3)
#define PRI_XCALL MAXPRI_KTHREAD
#define PRI_PGDAEMON (MAXPRI_KTHREAD - schedppq * 1)
#define PRI_VM (MAXPRI_KTHREAD - schedppq * 2)
#define PRI_IOFLUSH (MAXPRI_KTHREAD - schedppq * 3)
#define PRI_BIO (MAXPRI_KTHREAD - schedppq * 4)
#define PRI_IDLE PRI_USER
/*
* Miscellaneous.
*/
#define NBPW sizeof(int) /* number of bytes per word (integer) */
#define CMASK 022 /* default file mask: S_IWGRP|S_IWOTH */
#define NODEV (dev_t)(-1) /* non-existent device */
/*
* File system parameters and macros.
*
* The file system is made out of blocks of at most MAXBSIZE units, with
* smaller units (fragments) only in the last direct block. MAXBSIZE
* primarily determines the size of buffers in the buffer pool. It may be
* made larger without any effect on existing file systems; however making
* it smaller may make some file systems unmountable.
*/
#ifndef MAXBSIZE /* XXX */
#define MAXBSIZE MAXPHYS
#endif
#define MAXFRAG 8
/*
* MAXPATHLEN defines the longest permissible path length after expanding
* symbolic links. It is used to allocate a temporary buffer from the buffer
* pool in which to do the name expansion, hence should be a power of two,
* and must be less than or equal to MAXBSIZE. MAXSYMLINKS defines the
* maximum number of symbolic links that may be expanded in a path name.
* It should be set high enough to allow all legitimate uses, but halt
* infinite loops reasonably quickly.
*
* MAXSYMLINKS should be >= _POSIX_SYMLOOP_MAX (see <limits.h>)
*/
#define MAXPATHLEN PATH_MAX
#define MAXSYMLINKS 32
/*
* This is the maximum individual filename component length enforced by
* namei. Filesystems cannot exceed this limit. The upper bound for that
* limit is NAME_MAX. We don't bump it for now, for compatibility with
* old binaries during the time where MAXPATHLEN was 511 and NAME_MAX was
* 255
*/
#define KERNEL_NAME_MAX 255
/* Bit map related macros. */
#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
/* Macros for counting and rounding. */
#ifndef howmany
#define howmany(x, y) (((x)+((y)-1))/(y))
#endif
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
#define rounddown(x,y) (((x)/(y))*(y))
#define roundup2(x, m) (((x) + (m) - 1) & ~((m) - 1))
#define powerof2(x) ((((x)-1)&(x))==0)
/* Macros for min/max. */
#define MIN(a,b) ((/*CONSTCOND*/(a)<(b))?(a):(b))
#define MAX(a,b) ((/*CONSTCOND*/(a)>(b))?(a):(b))
/*
* Constants for setting the parameters of the kernel memory allocator.
*
* 2 ** MINBUCKET is the smallest unit of memory that will be
* allocated. It must be at least large enough to hold a pointer.
*
* Units of memory less or equal to MAXALLOCSAVE will permanently
* allocate physical memory; requests for these size pieces of
* memory are quite fast. Allocations greater than MAXALLOCSAVE must
* always allocate and free physical memory; requests for these
* size allocations should be done infrequently as they will be slow.
*
* Constraints: NBPG <= MAXALLOCSAVE <= 2 ** (MINBUCKET + 14), and
* MAXALLOCSAVE must be a power of two.
*/
#ifdef _LP64
#define MINBUCKET 5 /* 5 => min allocation of 32 bytes */
#else
#define MINBUCKET 4 /* 4 => min allocation of 16 bytes */
#endif
#define MAXALLOCSAVE (2 * NBPG)
/*
* Scale factor for scaled integers used to count %cpu time and load avgs.
*
* The number of CPU `tick's that map to a unique `%age' can be expressed
* by the formula (1 / (2 ^ (FSHIFT - 11))). The maximum load average that
* can be calculated (assuming 32 bits) can be closely approximated using
* the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15).
*
* For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age',
* FSHIFT must be at least 11; this gives us a maximum load avg of ~1024.
*/
#define FSHIFT 11 /* bits to right of fixed binary point */
#define FSCALE (1<<FSHIFT)
/*
* The time for a process to be blocked before being very swappable.
* This is a number of seconds which the system takes as being a non-trivial
* amount of real time. You probably shouldn't change this;
* it is used in subtle ways (fractions and multiples of it are, that is, like
* half of a ``long time'', almost a long time, etc.)
* It is related to human patience and other factors which don't really
* change over time.
*/
#define MAXSLP 20
/*
* Defaults for Unified Buffer Cache parameters.
* These may be overridden in <machine/param.h>.
*/
#ifndef UBC_WINSHIFT
#define UBC_WINSHIFT 13
#endif
#ifndef UBC_NWINS
#define UBC_NWINS 1024
#endif
#ifdef _KERNEL
/*
* macro to convert from milliseconds to hz without integer overflow
* Default version using only 32bits arithmetics.
* 64bit port can define 64bit version in their <machine/param.h>
* 0x20000 is safe for hz < 20000
*/
#ifndef mstohz
#define mstohz(ms) \
(__predict_false((ms) >= 0x20000) ? \
((ms +0u) / 1000u) * hz : \
((ms +0u) * hz) / 1000u)
#endif
#ifndef hztoms
#define hztoms(t) \
(__predict_false((t) >= 0x20000) ? \
((t +0u) / hz) * 1000u : \
((t +0u) * 1000u) / hz)
#endif
extern const int schedppq;
extern size_t coherency_unit;
#endif /* _KERNEL */
/*
* Minimum alignment of "struct lwp" needed by the architecture.
* This counts when packing a lock byte into a word alongside a
* pointer to an LWP.
*/
#ifndef MIN_LWP_ALIGNMENT
#define MIN_LWP_ALIGNMENT 32
#endif
#endif /* !__ASSEMBLER__ */
#endif /* !_SYS_PARAM_H_ */