/** * @file e1000.c * * @brief This file contains a device driver for Intel Pro/1000 * Gigabit Ethernet Controllers. */ #include "../drivers.h" #include #include #include #include #include #include #include #include "assert.h" #include "e1000.h" #include "e1000_hw.h" #include "e1000_reg.h" #include "e1000_pci.h" PRIVATE u16_t pcitab_e1000[] = { E1000_DEV_ID_82540EM, E1000_DEV_ID_82541GI_LF, E1000_DEV_ID_ICH10_R_BM_LF, 0, }; PRIVATE const char *progname; PRIVATE e1000_t e1000_table[E1000_PORT_NR]; _PROTOTYPE( PRIVATE void e1000_init, (message *mp) ); _PROTOTYPE( PRIVATE void e1000_init_pci, (void) ); _PROTOTYPE( PRIVATE int e1000_probe, (e1000_t *e) ); _PROTOTYPE( PRIVATE int e1000_init_hw, (e1000_t *e) ); _PROTOTYPE( PRIVATE void e1000_init_addr, (e1000_t *e) ); _PROTOTYPE( PRIVATE void e1000_init_buf, (e1000_t *e) ); _PROTOTYPE( PRIVATE void e1000_reset_hw, (e1000_t *e) ); _PROTOTYPE( PRIVATE void e1000_writev_s, (message *mp, int from_int) ); _PROTOTYPE( PRIVATE void e1000_readv_s, (message *mp, int from_int) ); _PROTOTYPE( PRIVATE void e1000_getstat_s, (message *mp) ); _PROTOTYPE( PRIVATE void e1000_getname, (message *mp) ); _PROTOTYPE( PRIVATE void e1000_interrupt, (message *mp) ); _PROTOTYPE( PRIVATE void e1000_signal, (void) ); _PROTOTYPE( PRIVATE int e1000_link_changed, (e1000_t *e) ); _PROTOTYPE( PRIVATE void e1000_stop, (void) ); _PROTOTYPE( PRIVATE e1000_t * e1000_port, (int port) ); _PROTOTYPE( PRIVATE uint32_t e1000_reg_read, (e1000_t *e, uint32_t reg) ); _PROTOTYPE( PRIVATE void e1000_reg_write, (e1000_t *e, uint32_t reg, uint32_t value) ); _PROTOTYPE( PRIVATE void e1000_reg_set, (e1000_t *e, uint32_t reg, uint32_t value) ); _PROTOTYPE( PRIVATE void e1000_reg_unset, (e1000_t *e, uint32_t reg, uint32_t value) ); _PROTOTYPE( PRIVATE u16_t eeprom_eerd, (void *e, int reg) ); _PROTOTYPE( PRIVATE u16_t eeprom_ich, (void *e, int reg) ); _PROTOTYPE( PRIVATE int eeprom_ich_init, (e1000_t *e) ); _PROTOTYPE( PRIVATE int eeprom_ich_cycle, (e1000_t *e, u32_t timeout) ); _PROTOTYPE( PRIVATE void reply, (e1000_t *e, int err, int may_block) ); _PROTOTYPE( PRIVATE void mess_reply, (message *req, message *reply) ); /* SEF functions and variables. */ FORWARD _PROTOTYPE( void sef_local_startup, (void) ); FORWARD _PROTOTYPE( int sef_cb_init_fresh, (int type, sef_init_info_t *info) ); EXTERN int env_argc; EXTERN char **env_argv; /*===========================================================================* * main * *===========================================================================*/ int main(int argc, char *argv[]) { message m; int r; /* SEF local startup. */ env_setargs(argc, argv); sef_local_startup(); /* * Enter the main driver loop. */ while (TRUE) { if ((r= sef_receive(ANY, &m)) != OK) { panic("e1000", "sef_receive failed", r); } if (is_notify(m.m_type)) { switch (_ENDPOINT_P(m.m_source)) { case HARDWARE: e1000_interrupt(&m); break; case PM_PROC_NR: e1000_signal(); break; case CLOCK: break; } continue; } switch (m.m_type) { case DL_WRITEV_S: e1000_writev_s(&m, FALSE); break; case DL_READV_S: e1000_readv_s(&m, FALSE); break; case DL_CONF: e1000_init(&m); break; case DL_STOP: e1000_stop(); break; case DL_GETSTAT_S: e1000_getstat_s(&m); break; case DL_GETNAME: e1000_getname(&m); break; default: panic("e1000", "illegal message", m.m_type); } } } /*===========================================================================* * sef_local_startup * *===========================================================================*/ PRIVATE void sef_local_startup() { /* Register init callbacks. */ sef_setcb_init_fresh(sef_cb_init_fresh); sef_setcb_init_restart(sef_cb_init_fresh); /* No live update support for now. */ /* Let SEF perform startup. */ sef_startup(); } /*===========================================================================* * sef_cb_init_fresh * *===========================================================================*/ PRIVATE int sef_cb_init_fresh(int type, sef_init_info_t *info) { /* Initialize the e1000 driver. */ int r; u32_t tasknr; /* Verify command-line arguments. */ if (env_argc < 1) { panic("e1000", "no program name given in argc/argv", NO_NUM); } else (progname = strrchr(env_argv[0],'/')) ? progname++ : (progname = env_argv[0]); /* Clear state. */ memset(e1000_table, 0, sizeof(e1000_table)); /* Perform calibration. */ if((r = tsc_calibrate()) != OK) { panic("e1000", "tsc_calibrate failed", r); } /* Try to notify inet that we are present (again) */ if ((r = ds_retrieve_label_num("inet", &tasknr)) == OK) { notify(tasknr); } else if (r != ESRCH) { printf("e1000: ds_retrieve_label_num failed for 'inet': %d\n", r); } return(OK); } /*===========================================================================* * e1000_init * *===========================================================================*/ PRIVATE void e1000_init(message *mp) { static int first_time = 1; message reply_mess; e1000_t *e; E1000_DEBUG(3, ("e1000: init()\n")); /* Configure PCI devices, if needed. */ if (first_time) { first_time = 0; e1000_init_pci(); } /* Retrieve e1000 pointer. */ e = e1000_port(mp->DL_PORT); e->client = mp->DL_PROC; /* Initialize hardware, if needed. */ if (!(e->status & E1000_ENABLED) && !(e1000_init_hw(e))) { reply_mess.m_type = DL_CONF_REPLY; reply_mess.m3_i1 = ENXIO; mess_reply(mp, &reply_mess); return; } /* Reply back to INET. */ reply_mess.m_type = DL_CONF_REPLY; reply_mess.m3_i1 = mp->DL_PORT; reply_mess.m3_i2 = E1000_PORT_NR; *(ether_addr_t *) reply_mess.m3_ca1 = e->address; mess_reply(mp, &reply_mess); } /*===========================================================================* * e1000_int_pci * *===========================================================================*/ PRIVATE void e1000_init_pci() { e1000_t *e; int i; /* Initialize the PCI bus. */ pci_init(); /* Try to detect e1000's. */ for (i = 0, e = &e1000_table[i]; i < E1000_PORT_NR; i++, e++) { strcpy(e->name, "e1000#0"); e->name[6] += i; e1000_probe(e); } } /*===========================================================================* * e1000_probe * *===========================================================================*/ PRIVATE int e1000_probe(e1000_t *e) { int i, r, devind; u16_t vid, did; u32_t status[2]; u32_t gfpreg, sector_base_addr, sector_end_addr; char *dname; E1000_DEBUG(3, ("%s: probe()\n", e->name)); /* * Attempt to iterate the PCI bus. Start at the beginning. */ if ((r = pci_first_dev(&devind, &vid, &did)) == 0) { return FALSE; } /* Loop devices on the PCI bus. */ for(;;) { for (i = 0; pcitab_e1000[i] != 0; i++) { if (vid != 0x8086) continue; if (did != pcitab_e1000[i]) continue; else break; } if (pcitab_e1000[i] != 0) break; if (!(r = pci_next_dev(&devind, &vid, &did))) { return FALSE; } } /* * Successfully detected an Intel Pro/1000 on the PCI bus. */ e->status |= E1000_DETECTED; e->eeprom_read = eeprom_eerd; /* * Set card specific properties. */ switch (did) { case E1000_DEV_ID_ICH10_R_BM_LF: e->eeprom_read = eeprom_ich; break; case E1000_DEV_ID_82541GI_LF: e->eeprom_done_bit = (1 << 1); e->eeprom_addr_off = 2; break; default: e->eeprom_done_bit = (1 << 4); e->eeprom_addr_off = 8; break; } /* Inform the user about the new card. */ if (!(dname = pci_dev_name(vid, did))) { dname = "Intel Pro/1000 Gigabit Ethernet Card"; } E1000_DEBUG(1, ("%s: %s (%04x/%04x/%02x) at %s\n", e->name, dname, vid, did, e->revision, pci_slot_name(devind))); /* Reserve PCI resources found. */ if ((r = pci_reserve_ok(devind)) != OK) { panic("e1000", "failed to reserve PCI device", r); } /* Read PCI configuration. */ e->irq = pci_attr_r8(devind, PCI_ILR); e->regs = vm_map_phys(SELF, (void *) pci_attr_r32(devind, PCI_BAR), 0x20000); /* Verify mapped registers. */ if (e->regs == (u8_t *) -1) { panic("e1000", "failed to map hardware registers from PCI\n", NO_NUM); } /* Optionally map flash memory. */ if (pci_attr_r32(devind, PCI_BAR_3)) { e->flash = vm_map_phys(SELF, (void *) pci_attr_r32(devind, PCI_BAR_2), 0x10000); gfpreg = E1000_READ_FLASH_REG(e, ICH_FLASH_GFPREG); /* * sector_X_addr is a "sector"-aligned address (4096 bytes) * Add 1 to sector_end_addr since this sector is included in * the overall size. */ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK; sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1; /* flash_base_addr is byte-aligned */ e->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; } /* * Output debug information. */ status[0] = e1000_reg_read(e, E1000_REG_STATUS); E1000_DEBUG(3, ("%s: MEM at 0x%lx, IRQ %d\n", e->name, e->regs, e->irq)); E1000_DEBUG(3, ("%s: link %s, %s duplex\n", e->name, status[0] & 3 ? "up" : "down", status[0] & 1 ? "full" : "half")); return TRUE; } /*===========================================================================* * e1000_init_hw * *===========================================================================*/ PRIVATE int e1000_init_hw(e) e1000_t *e; { int r, i; e->status |= E1000_ENABLED; e->irq_hook = e->irq; /* * Set the interrupt handler and policy. Do not automatically * re-enable interrupts. Return the IRQ line number on interrupts. */ if ((r = sys_irqsetpolicy(e->irq, 0, &e->irq_hook)) != OK) { panic(e->name, "sys_irqsetpolicy failed", r); } if ((r = sys_irqenable(&e->irq_hook)) != OK) { panic(e->name, "sys_irqenable failed", r); } /* Reset hardware. */ e1000_reset_hw(e); /* * Initialize appropriately, according to section 14.3 General Configuration * of Intel's Gigabit Ethernet Controllers Software Developer's Manual. */ e1000_reg_set(e, E1000_REG_CTRL, E1000_REG_CTRL_ASDE | E1000_REG_CTRL_SLU); e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_LRST); e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_PHY_RST); e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_ILOS); e1000_reg_write(e, E1000_REG_FCAL, 0); e1000_reg_write(e, E1000_REG_FCAH, 0); e1000_reg_write(e, E1000_REG_FCT, 0); e1000_reg_write(e, E1000_REG_FCTTV, 0); e1000_reg_unset(e, E1000_REG_CTRL, E1000_REG_CTRL_VME); /* Clear Multicast Table Array (MTA). */ for (i = 0; i < 128; i++) { e1000_reg_write(e, E1000_REG_MTA + i, 0); } /* Initialize statistics registers. */ for (i = 0; i < 64; i++) { e1000_reg_write(e, E1000_REG_CRCERRS + (i * 4), 0); } /* * Aquire MAC address and setup RX/TX buffers. */ e1000_init_addr(e); e1000_init_buf(e); /* Enable interrupts. */ e1000_reg_set(e, E1000_REG_IMS, E1000_REG_IMS_LSC | E1000_REG_IMS_RXO | E1000_REG_IMS_RXT | E1000_REG_IMS_TXQE | E1000_REG_IMS_TXDW); return TRUE; } /*===========================================================================* * e1000_init_addr * *===========================================================================*/ PRIVATE void e1000_init_addr(e) e1000_t *e; { static char eakey[]= E1000_ENVVAR "#_EA"; static char eafmt[]= "x:x:x:x:x:x"; u16_t word; int i; long v; /* * Do we have a user defined ethernet address? */ eakey[sizeof(E1000_ENVVAR)-1] = '0' + (e-e1000_table); for (i= 0; i < 6; i++) { if (env_parse(eakey, eafmt, i, &v, 0x00L, 0xFFL) != EP_SET) break; else e->address.ea_addr[i]= v; } /* * If that fails, read Ethernet Address from EEPROM. */ if ((i != 0 && i != 6) || i == 0) { for (i = 0; i < 3; i++) { word = e->eeprom_read(e, i); e->address.ea_addr[(i * 2)] = (word & 0xff); e->address.ea_addr[(i * 2) + 1] = (word & 0xff00) >> 8; } } /* * Set Receive Address. */ e1000_reg_write(e, E1000_REG_RAL, *(u32_t *)(&e->address.ea_addr[0])); e1000_reg_write(e, E1000_REG_RAH, *(u16_t *)(&e->address.ea_addr[4])); e1000_reg_set(e, E1000_REG_RAH, E1000_REG_RAH_AV); e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_MPE); E1000_DEBUG(3, ("%s: Ethernet Address %x:%x:%x:%x:%x:%x\n", e->name, e->address.ea_addr[0], e->address.ea_addr[1], e->address.ea_addr[2], e->address.ea_addr[3], e->address.ea_addr[4], e->address.ea_addr[5])); } /*===========================================================================* * e1000_init_buf * *===========================================================================*/ PRIVATE void e1000_init_buf(e) e1000_t *e; { phys_bytes rx_desc_p, rx_buff_p; phys_bytes tx_desc_p, tx_buff_p; int i; /* Number of descriptors. */ e->rx_desc_count = E1000_RXDESC_NR; e->tx_desc_count = E1000_TXDESC_NR; /* * First, allocate the receive descriptors. */ if (!e->rx_desc) { if ((e->rx_desc = alloc_contig(sizeof(e1000_rx_desc_t) * e->rx_desc_count, AC_ALIGN4K, &rx_desc_p)) == NULL) { panic(e->name, "failed to allocate RX descriptors", NO_NUM); } memset(e->rx_desc, 0, sizeof(e1000_rx_desc_t) * e->rx_desc_count); /* * Allocate 2048-byte buffers. */ e->rx_buffer_size = E1000_RXDESC_NR * E1000_IOBUF_SIZE; /* Attempt to allocate. */ if ((e->rx_buffer = alloc_contig(e->rx_buffer_size, AC_ALIGN4K, &rx_buff_p)) == NULL) { panic(e->name, "failed to allocate RX buffers", NO_NUM); } /* Setup receive descriptors. */ for (i = 0; i < E1000_RXDESC_NR; i++) { e->rx_desc[i].buffer = rx_buff_p + (i * E1000_IOBUF_SIZE); } } /* * Then, allocate transmit descriptors. */ if (!e->tx_desc) { if ((e->tx_desc = alloc_contig(sizeof(e1000_tx_desc_t) * e->tx_desc_count, AC_ALIGN4K, &tx_desc_p)) == NULL) { panic(e->name, "failed to allocate TX descriptors", NO_NUM); } memset(e->tx_desc, 0, sizeof(e1000_tx_desc_t) * e->tx_desc_count); /* * Allocate 2048-byte buffers. */ e->tx_buffer_size = E1000_TXDESC_NR * E1000_IOBUF_SIZE; /* Attempt to allocate. */ if ((e->tx_buffer = alloc_contig(e->tx_buffer_size, AC_ALIGN4K, &tx_buff_p)) == NULL) { panic(e->name, "failed to allocate TX buffers", NO_NUM); } /* Setup transmit descriptors. */ for (i = 0; i < E1000_RXDESC_NR; i++) { e->tx_desc[i].buffer = tx_buff_p + (i * E1000_IOBUF_SIZE); } } /* * Setup the receive ring registers. */ e1000_reg_write(e, E1000_REG_RDBAL, rx_desc_p); e1000_reg_write(e, E1000_REG_RDBAH, 0); e1000_reg_write(e, E1000_REG_RDLEN, e->rx_desc_count * sizeof(e1000_rx_desc_t)); e1000_reg_write(e, E1000_REG_RDH, 0); e1000_reg_write(e, E1000_REG_RDT, e->rx_desc_count - 1); e1000_reg_unset(e, E1000_REG_RCTL, E1000_REG_RCTL_BSIZE); e1000_reg_set(e, E1000_REG_RCTL, E1000_REG_RCTL_EN); /* * Setup the transmit ring registers. */ e1000_reg_write(e, E1000_REG_TDBAL, tx_desc_p); e1000_reg_write(e, E1000_REG_TDBAH, 0); e1000_reg_write(e, E1000_REG_TDLEN, e->tx_desc_count * sizeof(e1000_tx_desc_t)); e1000_reg_write(e, E1000_REG_TDH, 0); e1000_reg_write(e, E1000_REG_TDT, 0); e1000_reg_set( e, E1000_REG_TCTL, E1000_REG_TCTL_EN | E1000_REG_TCTL_PSP); } /*===========================================================================* * e1000_reset_hw * *===========================================================================*/ PRIVATE void e1000_reset_hw(e) e1000_t *e; { /* Assert a Device Reset signal. */ e1000_reg_set(e, E1000_REG_CTRL, E1000_REG_CTRL_RST); /* Wait one microsecond. */ tickdelay(1); } /*===========================================================================* * e1000_writev_s * *===========================================================================*/ PRIVATE void e1000_writev_s(mp, from_int) message *mp; int from_int; { e1000_t *e = e1000_port(mp->DL_PORT); e1000_tx_desc_t *desc; iovec_s_t iovec[E1000_IOVEC_NR]; int r, head, tail, i, bytes = 0, size; E1000_DEBUG(3, ("e1000: writev_s(%x,%d)\n", mp, from_int)); /* Are we called from the interrupt handler? */ if (!from_int) { /* We cannot write twice simultaneously. assert(!(e->status & E1000_WRITING)); */ /* Copy write message. */ e->tx_message = *mp; e->status |= E1000_WRITING; /* Must be a sane vector count. */ assert(e->tx_message.DL_COUNT > 0); assert(e->tx_message.DL_COUNT < E1000_IOVEC_NR); /* * Copy the I/O vector table. */ if ((r = sys_safecopyfrom(e->client, e->tx_message.DL_GRANT, 0, (vir_bytes) iovec, e->tx_message.DL_COUNT * sizeof(iovec_s_t), D)) != OK) { panic(e->name, "sys_safecopyfrom() failed", r); } /* Find the head, tail and current descriptors. */ head = e1000_reg_read(e, E1000_REG_TDH); tail = e1000_reg_read(e, E1000_REG_TDT); desc = &e->tx_desc[tail]; E1000_DEBUG(4, ("%s: head=%d, tail=%d\n", e->name, head, tail)); /* Loop vector elements. */ for (i = 0; i < e->tx_message.DL_COUNT; i++) { size = iovec[i].iov_size < (E1000_IOBUF_SIZE - bytes) ? iovec[i].iov_size : (E1000_IOBUF_SIZE - bytes); E1000_DEBUG(4, ("iovec[%d] = %d\n", i, size)); /* Copy bytes to TX queue buffers. */ if ((r = sys_safecopyfrom(e->client, iovec[i].iov_grant, 0, (vir_bytes) e->tx_buffer + (tail * E1000_IOBUF_SIZE), size, D)) != OK) { panic(e->name, "sys_safecopyfrom() failed", r); } /* Mark this descriptor ready. */ desc->status = 0; desc->command = 0; desc->length = size; /* Marks End-of-Packet. */ if (i == e->tx_message.DL_COUNT - 1) { desc->command = E1000_TX_CMD_EOP | E1000_TX_CMD_FCS | E1000_TX_CMD_RS; } /* Move to next descriptor. */ tail = (tail + 1) % e->tx_desc_count; bytes += size; desc = &e->tx_desc[tail]; } /* Increment tail. Start transmission. */ e1000_reg_write(e, E1000_REG_TDT, tail); E1000_DEBUG(2, ("e1000: wrote %d byte packet\n", bytes)); } else { e->status |= E1000_TRANSMIT; } reply(e, OK, FALSE); } /*===========================================================================* * e1000_readv_s * *===========================================================================*/ PRIVATE void e1000_readv_s(mp, from_int) message *mp; int from_int; { e1000_t *e = e1000_port(mp->DL_PORT); e1000_rx_desc_t *desc; iovec_s_t iovec[E1000_IOVEC_NR]; int i, r, head, tail, cur, bytes = 0, size; E1000_DEBUG(3, ("e1000: readv_s(%x,%d)\n", mp, from_int)); /* Are we called from the interrupt handler? */ if (!from_int) { e->rx_message = *mp; e->status |= E1000_READING; e->rx_size = 0; assert(e->rx_message.DL_COUNT > 0); assert(e->rx_message.DL_COUNT < E1000_IOVEC_NR); } if (e->status & E1000_READING) { /* * Copy the I/O vector table first. */ if ((r = sys_safecopyfrom(e->client, e->rx_message.DL_GRANT, 0, (vir_bytes) iovec, e->rx_message.DL_COUNT * sizeof(iovec_s_t), D)) != OK) { panic(e->name, "sys_safecopyfrom() failed", r); } /* Find the head, tail and current descriptors. */ head = e1000_reg_read(e, E1000_REG_RDH); tail = e1000_reg_read(e, E1000_REG_RDT); cur = (tail + 1) % e->rx_desc_count; desc = &e->rx_desc[cur]; /* * Only handle one packet at a time. */ if (!(desc->status & E1000_RX_STATUS_EOP)) { reply(e, OK, FALSE); return; } E1000_DEBUG(4, ("%s: head=%x, tail=%d\n", e->name, head, tail)); /* * Copy to vector elements. */ for (i = 0; i < e->rx_message.DL_COUNT && bytes < desc->length; i++) { size = iovec[i].iov_size < (desc->length - bytes) ? iovec[i].iov_size : (desc->length - bytes); E1000_DEBUG(4, ("iovec[%d] = %d[%d]\n", i, iovec[i].iov_size, size)); if ((r = sys_safecopyto(e->client, iovec[i].iov_grant, 0, (vir_bytes) e->rx_buffer + bytes + (cur * E1000_IOBUF_SIZE), size, D)) != OK) { panic(e->name, "sys_safecopyto() failed", r); } bytes += size; } desc->status = 0; /* * Update state. */ e->rx_size = bytes; e->status |= E1000_RECEIVED; E1000_DEBUG(2, ("e1000: got %d byte packet\n", e->rx_size)); /* Increment tail. */ e1000_reg_write(e, E1000_REG_RDT, (tail + 1) % e->rx_desc_count); } reply(e, OK, FALSE); } /*===========================================================================* * e1000_getstat_s * *===========================================================================*/ PRIVATE void e1000_getstat_s(mp) message *mp; { int r; eth_stat_t stats; e1000_t *e = e1000_port(mp->DL_PORT); E1000_DEBUG(3, ("e1000: getstat_s()\n")); stats.ets_recvErr = e1000_reg_read(e, E1000_REG_RXERRC); stats.ets_sendErr = 0; stats.ets_OVW = 0; stats.ets_CRCerr = e1000_reg_read(e, E1000_REG_CRCERRS); stats.ets_frameAll = 0; stats.ets_missedP = e1000_reg_read(e, E1000_REG_MPC); stats.ets_packetR = e1000_reg_read(e, E1000_REG_TPR); stats.ets_packetT = e1000_reg_read(e, E1000_REG_TPT); stats.ets_collision = e1000_reg_read(e, E1000_REG_COLC); stats.ets_transAb = 0; stats.ets_carrSense = 0; stats.ets_fifoUnder = 0; stats.ets_fifoOver = 0; stats.ets_CDheartbeat = 0; stats.ets_OWC = 0; sys_safecopyto(mp->DL_PROC, mp->DL_GRANT, 0, (vir_bytes)&stats, sizeof(stats), D); mp->m_type = DL_STAT_REPLY; mp->DL_PORT = mp->DL_PORT; mp->DL_STAT = OK; if((r=send(mp->m_source, mp)) != OK) panic("e1000", "e1000_getstat: send() failed", r); } /*===========================================================================* * e1000_getname * *===========================================================================*/ PRIVATE void e1000_getname(mp) message *mp; { int r; E1000_DEBUG(3, ("e1000: getname()\n")); /* Copy our program name. */ strncpy(mp->DL_NAME, progname, sizeof(mp->DL_NAME)); mp->DL_NAME[ sizeof(mp->DL_NAME) - 1 ] = 0; /* Acknowledge the name request. */ mp->m_type = DL_NAME_REPLY; if ((r = send(mp->m_source, mp)) != OK) { panic("e1000", "e1000_getname: send() failed", r); } } /*===========================================================================* * e1000_interrupt * *===========================================================================*/ PRIVATE void e1000_interrupt(mp) message *mp; { e1000_t *e; u32_t cause; unsigned int i; E1000_DEBUG(3, ("e1000: interrupt\n")); /* * Loop all cards. Check for interrupt reason(s). */ for (i = 0; i < E1000_PORT_NR; i++) { e = e1000_port(i); /* Re-enable interrupts. */ if (sys_irqenable(&e->irq_hook) != OK) { panic("e1000", "failed to re-enable IRQ", NO_NUM); } /* Read the Interrupt Cause Read register. */ if ((cause = e1000_reg_read(e, E1000_REG_ICR))) { if (cause & E1000_REG_ICR_LSC) e1000_link_changed(e); if (cause & (E1000_REG_ICR_RXO | E1000_REG_ICR_RXT)) e1000_readv_s(&e->rx_message, TRUE); if ((cause & E1000_REG_ICR_TXQE) || (cause & E1000_REG_ICR_TXDW)) e1000_writev_s(&e->tx_message, TRUE); } } } /*===========================================================================* * e1000_signal * *===========================================================================*/ PRIVATE void e1000_signal(void) { sigset_t sigset; E1000_DEBUG(3, ("e1000: signal()\n")); /* Try to obtain signal set from PM. */ if (getsigset(&sigset) != 0) { return; } /* Check for known signals. */ if (sigismember(&sigset, SIGTERM)) { e1000_stop(); } } /*===========================================================================* * e1000_link_changed * *===========================================================================*/ PRIVATE int e1000_link_changed(e) e1000_t *e; { E1000_DEBUG(4, ("%s: link_changed()\n", e->name)); return FALSE; } /*===========================================================================* * e1000_stop * *===========================================================================*/ PRIVATE void e1000_stop() { E1000_DEBUG(3, ("e1000: stop()\n")); exit(EXIT_SUCCESS); } /*===========================================================================* * e1000_port * *===========================================================================*/ PRIVATE e1000_t * e1000_port(num) int num; { /* * Is the given port number within the allowed range? */ if (num < 0 || num >= E1000_PORT_NR) { panic("e1000", "invalid port number given", num); } /* * The card must be active. */ if (!(e1000_table[num].status & E1000_DETECTED)) { panic("e1000", "inactive port number given", num); } return &e1000_table[num]; } /*===========================================================================* * e1000_reg_read * *===========================================================================*/ PRIVATE uint32_t e1000_reg_read(e, reg) e1000_t *e; uint32_t reg; { uint32_t value; /* Assume a sane register. */ assert(reg < 0x1ffff); /* Read from memory mapped register. */ value = *(u32_t *)(e->regs + reg); /* Return the result. */ return value; } /*===========================================================================* * e1000_reg_write * *===========================================================================*/ PRIVATE void e1000_reg_write(e, reg, value) e1000_t *e; uint32_t reg; uint32_t value; { /* Assume a sane register. */ assert(reg < 0x1ffff); /* Write to memory mapped register. */ *(u32_t *)(e->regs + reg) = value; } /*===========================================================================* * e1000_reg_set * *===========================================================================*/ PRIVATE void e1000_reg_set(e, reg, value) e1000_t *e; uint32_t reg; uint32_t value; { uint32_t data; /* First read the current value. */ data = e1000_reg_read(e, reg); /* Set value, and write back. */ e1000_reg_write(e, reg, data | value); } /*===========================================================================* * e1000_reg_unset * *===========================================================================*/ PRIVATE void e1000_reg_unset(e, reg, value) e1000_t *e; uint32_t reg; uint32_t value; { uint32_t data; /* First read the current value. */ data = e1000_reg_read(e, reg); /* Unset value, and write back. */ e1000_reg_write(e, reg, data & ~value); } /*===========================================================================* * eeprom_eerd * *===========================================================================*/ PRIVATE u16_t eeprom_eerd(v, reg) void *v; int reg; { e1000_t *e = (e1000_t *) v; u16_t data; /* Request EEPROM read. */ e1000_reg_write(e, E1000_REG_EERD, (reg << e->eeprom_addr_off) | (E1000_REG_EERD_START)); /* Wait until ready. */ while (!(e1000_reg_read(e, E1000_REG_EERD) & e->eeprom_done_bit)); /* Fetch data. */ data = (e1000_reg_read(e, E1000_REG_EERD) & E1000_REG_EERD_DATA) >> 16; return data; } /*===========================================================================* * eeprom_ich_init * *===========================================================================*/ PRIVATE int eeprom_ich_init(e) e1000_t *e; { union ich8_hws_flash_status hsfsts; int ret_val = -1; int i = 0; hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); /* Check if the flash descriptor is valid */ if (hsfsts.hsf_status.fldesvalid == 0) { E1000_DEBUG(3, ("Flash descriptor invalid. " "SW Sequencing must be used.")); goto out; } /* Clear FCERR and DAEL in hw status by writing 1 */ hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); /* * Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it * is 1 after hardware reset, which can then be used as an * indication whether a cycle is in progress or has been * completed. */ if (hsfsts.hsf_status.flcinprog == 0) { /* * There is no cycle running at present, * so we can start a cycle. * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); ret_val = 0; } else { /* * Otherwise poll for sometime so the current * cycle has a chance to end before giving up. */ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcinprog == 0) { ret_val = 0; break; } tickdelay(1); } if (ret_val == 0) { /* * Successful in waiting for previous cycle to timeout, * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFSTS, hsfsts.regval); } else { E1000_DEBUG(3, ("Flash controller busy, cannot get access")); } } out: return ret_val; } /*===========================================================================* * eeprom_ich_cycle * *===========================================================================*/ PRIVATE int eeprom_ich_cycle(e1000_t *e, u32_t timeout) { union ich8_hws_flash_ctrl hsflctl; union ich8_hws_flash_status hsfsts; int ret_val = -1; u32_t i = 0; E1000_DEBUG(3, ("e1000_flash_cycle_ich8lan")); /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcdone == 1) break; tickdelay(1); } while (i++ < timeout); if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) ret_val = 0; return ret_val; } /*===========================================================================* * eeprom_ich * *===========================================================================*/ PRIVATE u16_t eeprom_ich(v, reg) void *v; int reg; { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; u32_t flash_linear_addr; u32_t flash_data = 0; int ret_val = -1; u8_t count = 0; e1000_t *e = (e1000_t *) v; u16_t data; E1000_DEBUG(3, ("e1000_read_flash_data_ich8lan")); if (reg > ICH_FLASH_LINEAR_ADDR_MASK) goto out; reg *= sizeof(u16_t); flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & reg) + e->flash_base_addr; do { tickdelay(1); /* Steps */ ret_val = eeprom_ich_init(e); if (ret_val != 0) break; hsflctl.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = 1; hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; E1000_WRITE_FLASH_REG16(e, ICH_FLASH_HSFCTL, hsflctl.regval); E1000_WRITE_FLASH_REG(e, ICH_FLASH_FADDR, flash_linear_addr); ret_val = eeprom_ich_cycle(v, ICH_FLASH_READ_COMMAND_TIMEOUT); /* * Check if FCERR is set to 1, if set to 1, clear it * and try the whole sequence a few more times, else * read in (shift in) the Flash Data0, the order is * least significant byte first msb to lsb */ if (ret_val == 0) { flash_data = E1000_READ_FLASH_REG(e, ICH_FLASH_FDATA0); data = (u16_t)(flash_data & 0x0000FFFF); break; } else { /* * If we've gotten here, then things are probably * completely hosed, but if the error condition is * detected, it won't hurt to give it another try... * ICH_FLASH_CYCLE_REPEAT_COUNT times. */ hsfsts.regval = E1000_READ_FLASH_REG16(e, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; } else if (hsfsts.hsf_status.flcdone == 0) { E1000_DEBUG(3, ("Timeout error - flash cycle " "did not complete.")); break; } } } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); out: return data; } /*===========================================================================* * reply * *===========================================================================*/ PRIVATE void reply(e, err, may_block) e1000_t *e; int err; int may_block; { message msg; int r; /* Only reply to client for read/write request. */ if (!(e->status & E1000_READING || e->status & E1000_WRITING)) { return; } /* Construct reply message. */ msg.m_type = DL_TASK_REPLY; msg.DL_PORT = e - e1000_table; msg.DL_PROC = e->client; msg.DL_COUNT = 0; msg.DL_STAT = 0; msg.DL_CLCK = 0; /* Did we successfully receive packet(s)? */ if (e->status & E1000_READING && e->status & E1000_RECEIVED) { msg.DL_STAT = DL_PACK_RECV; msg.DL_COUNT = e->rx_size >= ETH_MIN_PACK_SIZE ? e->rx_size : ETH_MIN_PACK_SIZE; /* Clear flags. */ e->status &= ~(E1000_READING | E1000_RECEIVED); } /* Did we successfully transmit packet(s)? */ if (e->status & E1000_TRANSMIT && e->status & E1000_WRITING) { msg.DL_STAT = DL_PACK_SEND; msg.DL_COUNT = 0; /* Clear flags. */ e->status &= ~(E1000_WRITING | E1000_TRANSMIT); } /* Acknowledge to INET. */ if ((r = send(e->client, &msg)) != OK) { panic("e1000", "send() failed", r); } } /*===========================================================================* * mess_reply * *===========================================================================*/ PRIVATE void mess_reply(req, reply_mess) message *req; message *reply_mess; { if (send(req->m_source, reply_mess) != OK) { panic("e1000", "unable to send reply message", NO_NUM); } }