/* This file contains the device dependent part of a driver for the IBM-AT * winchester controller. Written by Adri Koppes. * * The file contains one entry point: * * at_winchester_task: main entry when system is brought up * * Changes: * Aug 19, 2005 ATA PCI support, supports SATA (Ben Gras) * Nov 18, 2004 moved AT disk driver to user-space (Jorrit N. Herder) * Aug 20, 2004 watchdogs replaced by sync alarms (Jorrit N. Herder) * Mar 23, 2000 added ATAPI CDROM support (Michael Temari) * May 14, 2000 d-d/i rewrite (Kees J. Bot) * Apr 13, 1992 device dependent/independent split (Kees J. Bot) */ #include "at_wini.h" #include #include #include #include #include #include #include /* Variables. */ /* Common command block */ struct command { u8_t precomp; /* REG_PRECOMP, etc. */ u8_t count; u8_t sector; u8_t cyl_lo; u8_t cyl_hi; u8_t ldh; u8_t command; /* The following at for LBA48 */ u8_t count_prev; u8_t sector_prev; u8_t cyl_lo_prev; u8_t cyl_hi_prev; }; /* Timeouts and max retries. */ static int timeout_usecs = DEF_TIMEOUT_USECS; static int max_errors = MAX_ERRORS; static long w_standard_timeouts = 0; static long w_pci_debug = 0; static long w_instance = 0; static long disable_dma = 0; static long atapi_debug = 0; static long w_identify_wakeup_ticks; static long wakeup_ticks; static long w_atapi_dma; static int w_testing = 0; static int w_silent = 0; static int w_next_drive = 0; static u32_t system_hz; /* The struct wini is indexed by controller first, then drive (0-3). * Controller 0 is always the 'compatability' ide controller, at * the fixed locations, whether present or not. */ static struct wini { /* main drive struct, one entry per drive */ unsigned state; /* drive state: deaf, initialized, dead */ unsigned short w_status; /* device status register */ unsigned base_cmd; /* command base register */ unsigned base_ctl; /* control base register */ unsigned base_dma; /* dma base register */ int dma_intseen; unsigned irq; /* interrupt request line */ unsigned irq_need_ack; /* irq needs to be acknowledged */ int irq_hook_id; /* id of irq hook at the kernel */ int lba48; /* supports lba48 */ int dma; /* supports dma */ unsigned lcylinders; /* logical number of cylinders (BIOS) */ unsigned lheads; /* logical number of heads */ unsigned lsectors; /* logical number of sectors per track */ unsigned pcylinders; /* physical number of cylinders (translated) */ unsigned pheads; /* physical number of heads */ unsigned psectors; /* physical number of sectors per track */ unsigned ldhpref; /* top four bytes of the LDH (head) register */ unsigned precomp; /* write precompensation cylinder / 4 */ unsigned max_count; /* max request for this drive */ unsigned open_ct; /* in-use count */ struct device part[DEV_PER_DRIVE]; /* disks and partitions */ struct device subpart[SUB_PER_DRIVE]; /* subpartitions */ } wini[MAX_DRIVES], *w_wn; static int w_device = -1; int w_command; /* current command in execution */ static int w_drive; /* selected drive */ static struct device *w_dv; /* device's base and size */ static u8_t *tmp_buf; #define ATA_DMA_SECTORS 64 #define ATA_DMA_BUF_SIZE (ATA_DMA_SECTORS*SECTOR_SIZE) static char *dma_buf; static phys_bytes dma_buf_phys; #define N_PRDTE 1024 /* Should be enough for large requests */ struct prdte { phys_bytes prdte_base; u16_t prdte_count; u8_t prdte_reserved; u8_t prdte_flags; }; #define PRDT_BYTES (sizeof(struct prdte) * N_PRDTE) static struct prdte *prdt; static phys_bytes prdt_phys; #define PRDTE_FL_EOT 0x80 /* End of table */ /* IDE devices we trust are IDE devices. */ static struct quirk { int pci_class, pci_subclass, pci_interface; u16_t vendor; u16_t device; } quirk_table[]= { { 0x01, 0x04, 0x00, 0x1106, 0x3149 }, /* VIA VT6420 */ { 0x01, 0x04, 0x00, 0x1095, 0x3512 }, { 0x01, 0x80, -1, 0x1095, 0x3114 }, /* Silicon Image SATA */ { 0, 0, 0, 0, 0 } /* end of list */ }; static void init_params(void); static void init_drive(struct wini *w, int base_cmd, int base_ctl, int base_dma, int irq, int ack, int hook, int drive); static void init_params_pci(int); static int w_do_open(dev_t minor, int access); static struct device *w_prepare(dev_t dev); static struct device *w_part(dev_t minor); static int w_identify(void); static char *w_name(void); static int w_specify(void); static int w_io_test(void); static ssize_t w_transfer(dev_t minor, int do_write, u64_t position, endpoint_t proc_nr, iovec_t *iov, unsigned int nr_req, int flags); static int com_out(struct command *cmd); static int com_out_ext(struct command *cmd); static int setup_dma(unsigned *sizep, endpoint_t proc_nr, iovec_t *iov, size_t addr_offset, int do_write); static void w_need_reset(void); static void ack_irqs(unsigned int); static int w_do_close(dev_t minor); static int w_ioctl(dev_t minor, unsigned int request, endpoint_t endpt, cp_grant_id_t grant); static void w_hw_int(unsigned int irqs); static int com_simple(struct command *cmd); static void w_timeout(void); static int w_reset(void); static void w_intr_wait(void); static int at_intr_wait(void); static int w_waitfor(int mask, int value); static int w_waitfor_dma(int mask, int value); static void w_geometry(dev_t minor, struct partition *entry); #if ENABLE_ATAPI static int atapi_sendpacket(u8_t *packet, unsigned cnt, int do_dma); static int atapi_intr_wait(int dma, size_t max); static int atapi_open(void); static void atapi_close(void); static int atapi_transfer(int do_write, u64_t position, endpoint_t endpt, iovec_t *iov, unsigned int nr_req); #endif #define sys_voutb(out, n) at_voutb((out), (n)) static int at_voutb(pvb_pair_t *, int n); #define sys_vinb(in, n) at_vinb((in), (n)) static int at_vinb(pvb_pair_t *, int n); #undef sys_outb #undef sys_inb #undef sys_outl static int at_out(int line, u32_t port, u32_t value, char *typename, int type); static int at_in(int line, u32_t port, u32_t *value, char *typename, int type); #define sys_outb(p, v) at_out(__LINE__, (p), (v), "outb", _DIO_BYTE) #define sys_inb(p, v) at_in(__LINE__, (p), (v), "inb", _DIO_BYTE) #define sys_outl(p, v) at_out(__LINE__, (p), (v), "outl", _DIO_LONG) /* Entry points to this driver. */ static struct blockdriver w_dtab = { BLOCKDRIVER_TYPE_DISK,/* handle partition requests */ w_do_open, /* open or mount request, initialize device */ w_do_close, /* release device */ w_transfer, /* do the I/O */ w_ioctl, /* I/O control requests */ NULL, /* nothing to clean up */ w_part, /* return partition information */ w_geometry, /* tell the geometry of the disk */ w_hw_int, /* leftover hardware interrupts */ NULL, /* ignore leftover alarms */ NULL, /* ignore unrecognized messages */ NULL /* no multithreading support */ }; /* SEF functions and variables. */ static void sef_local_startup(void); static int sef_cb_init_fresh(int type, sef_init_info_t *info); EXTERN int sef_cb_lu_prepare(int state); EXTERN int sef_cb_lu_state_isvalid(int state); EXTERN void sef_cb_lu_state_dump(int state); /*===========================================================================* * at_winchester_task * *===========================================================================*/ int main(int argc, char *argv[]) { /* SEF local startup. */ env_setargs(argc, argv); sef_local_startup(); /* Call the generic receive loop. */ blockdriver_task(&w_dtab); return(OK); } /*===========================================================================* * sef_local_startup * *===========================================================================*/ static void sef_local_startup(void) { /* Register init callbacks. */ sef_setcb_init_fresh(sef_cb_init_fresh); sef_setcb_init_lu(sef_cb_init_fresh); /* Register live update callbacks. */ sef_setcb_lu_prepare(sef_cb_lu_prepare); sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid); sef_setcb_lu_state_dump(sef_cb_lu_state_dump); /* Let SEF perform startup. */ sef_startup(); } /*===========================================================================* * sef_cb_init_fresh * *===========================================================================*/ static int sef_cb_init_fresh(int type, sef_init_info_t *UNUSED(info)) { /* Initialize the at_wini driver. */ system_hz = sys_hz(); if (!(tmp_buf = alloc_contig(2*DMA_BUF_SIZE, AC_ALIGN4K, NULL))) panic("unable to allocate temporary buffer"); w_identify_wakeup_ticks = WAKEUP_TICKS; wakeup_ticks = WAKEUP_TICKS; /* Set special disk parameters. */ init_params(); /* Announce we are up! */ blockdriver_announce(type); return(OK); } /*===========================================================================* * init_params * *===========================================================================*/ static void init_params(void) { /* This routine is called at startup to initialize the drive parameters. */ u16_t parv[2]; unsigned int vector, size; int drive, nr_drives; struct wini *wn; u8_t params[16]; int s; long wakeup_secs = WAKEUP_SECS; /* Boot variables. */ env_parse("instance", "d", 0, &w_instance, 0, 8); env_parse("ata_std_timeout", "d", 0, &w_standard_timeouts, 0, 1); env_parse("ata_pci_debug", "d", 0, &w_pci_debug, 0, 1); env_parse(NO_DMA_VAR, "d", 0, &disable_dma, 0, 1); env_parse("ata_id_timeout", "d", 0, &wakeup_secs, 1, 60); env_parse("atapi_debug", "d", 0, &atapi_debug, 0, 1); env_parse("atapi_dma", "d", 0, &w_atapi_dma, 0, 1); w_identify_wakeup_ticks = wakeup_secs * system_hz; if(atapi_debug) panic("atapi_debug"); if(w_identify_wakeup_ticks <= 0) { printf("changing wakeup from %ld to %d ticks.\n", w_identify_wakeup_ticks, WAKEUP_TICKS); w_identify_wakeup_ticks = WAKEUP_TICKS; } if (disable_dma) { printf("at_wini%ld: DMA for ATA devices is disabled.\n", w_instance); } else { /* Ask for anonymous memory for DMA, that is physically contiguous. */ dma_buf = alloc_contig(ATA_DMA_BUF_SIZE, 0, &dma_buf_phys); prdt = alloc_contig(PRDT_BYTES, 0, &prdt_phys); if(!dma_buf || !prdt) { disable_dma = 1; printf("at_wini%ld: no dma\n", w_instance); } } if (w_instance == 0) { /* Get the number of drives from the BIOS data area */ s=sys_readbios(NR_HD_DRIVES_ADDR, params, NR_HD_DRIVES_SIZE); if (s != OK) panic("Couldn't read BIOS: %d", s); if ((nr_drives = params[0]) > 2) nr_drives = 2; for (drive = 0, wn = wini; drive < COMPAT_DRIVES; drive++, wn++) { if (drive < nr_drives) { /* Copy the BIOS parameter vector */ vector = (drive == 0) ? BIOS_HD0_PARAMS_ADDR : BIOS_HD1_PARAMS_ADDR; size = (drive == 0) ? BIOS_HD0_PARAMS_SIZE : BIOS_HD1_PARAMS_SIZE; s=sys_readbios(vector, parv, size); if (s != OK) panic("Couldn't read BIOS: %d", s); /* Calculate the address of the parameters and copy them */ s=sys_readbios(hclick_to_physb(parv[1]) + parv[0], params, 16L); if (s != OK) panic("Couldn't copy parameters: %d", s); /* Copy the parameters to the structures of the drive */ wn->lcylinders = bp_cylinders(params); wn->lheads = bp_heads(params); wn->lsectors = bp_sectors(params); wn->precomp = bp_precomp(params) >> 2; } /* Fill in non-BIOS parameters. */ init_drive(wn, drive < 2 ? REG_CMD_BASE0 : REG_CMD_BASE1, drive < 2 ? REG_CTL_BASE0 : REG_CTL_BASE1, 0 /* no DMA */, NO_IRQ, 0, 0, drive); w_next_drive++; } } /* Look for controllers on the pci bus. Skip none the first instance, * skip one and then 2 for every instance, for every next instance. */ if (w_instance == 0) init_params_pci(0); else init_params_pci(w_instance*2-1); } #define ATA_IF_NOTCOMPAT1 (1L << 0) #define ATA_IF_NOTCOMPAT2 (1L << 2) /*===========================================================================* * init_drive * *===========================================================================*/ static void init_drive(struct wini *w, int base_cmd, int base_ctl, int base_dma, int irq, int ack, int hook, int drive) { w->state = 0; w->w_status = 0; w->base_cmd = base_cmd; w->base_ctl = base_ctl; w->base_dma = base_dma; if(w_pci_debug) printf("at_wini%ld: drive %d: base_cmd 0x%x, base_ctl 0x%x, base_dma 0x%x\n", w_instance, w-wini, w->base_cmd, w->base_ctl, w->base_dma); w->irq = irq; w->irq_need_ack = ack; w->irq_hook_id = hook; w->ldhpref = ldh_init(drive); w->max_count = MAX_SECS << SECTOR_SHIFT; w->lba48 = 0; w->dma = 0; } static int quirkmatch(struct quirk *table, u8_t bcr, u8_t scr, u8_t interface, u16_t vid, u16_t did) { while(table->vendor) { if(table->vendor == vid && table->device == did && table->pci_class == bcr && table->pci_subclass == scr && (table->pci_interface == -1 || table->pci_interface == interface)) { return 1; } table++; } return 0; } /*===========================================================================* * init_params_pci * *===========================================================================*/ static void init_params_pci(int skip) { int i, r, devind, drive, pci_compat = 0; int irq, irq_hook; u8_t bcr, scr, interface; u16_t vid, did; u32_t base_dma, t3; pci_init(); for(drive = w_next_drive; drive < MAX_DRIVES; drive++) wini[drive].state = IGNORING; for(r = pci_first_dev(&devind, &vid, &did); r != 0; r = pci_next_dev(&devind, &vid, &did)) { int quirk = 0; /* Except class 01h (mass storage), subclass be 01h (ATA). * Also check listed RAID controllers. */ bcr= pci_attr_r8(devind, PCI_BCR); scr= pci_attr_r8(devind, PCI_SCR); interface= pci_attr_r8(devind, PCI_PIFR); t3= ((bcr << 16) | (scr << 8) | interface); if (bcr == PCI_BCR_MASS_STORAGE && scr == PCI_MS_IDE) ; /* Okay */ else if(quirkmatch(quirk_table, bcr, scr, interface, vid, did)) { quirk = 1; } else continue; /* Unsupported device class */ /* Found a controller. * Programming interface register tells us more. */ irq = pci_attr_r8(devind, PCI_ILR); /* Any non-compat drives? */ if (quirk || (interface & (ATA_IF_NOTCOMPAT1 | ATA_IF_NOTCOMPAT2))) { if (w_next_drive >= MAX_DRIVES) { /* We can't accept more drives, but have to search for * controllers operating in compatibility mode. */ continue; } irq_hook = irq; if (skip > 0) { if (w_pci_debug) { printf( "atapci skipping controller (remain %d)\n", skip); } skip--; continue; } if(pci_reserve_ok(devind) != OK) { printf("at_wini%ld: pci_reserve %d failed - " "ignoring controller!\n", w_instance, devind); continue; } if (sys_irqsetpolicy(irq, 0, &irq_hook) != OK) { printf("atapci: couldn't set IRQ policy %d\n", irq); continue; } if (sys_irqenable(&irq_hook) != OK) { printf("atapci: couldn't enable IRQ line %d\n", irq); continue; } } base_dma = pci_attr_r32(devind, PCI_BAR_5) & PCI_BAR_IO_MASK; /* Primary channel not in compatability mode? */ if (quirk || (interface & ATA_IF_NOTCOMPAT1)) { u32_t base_cmd, base_ctl; base_cmd = pci_attr_r32(devind, PCI_BAR) & PCI_BAR_IO_MASK; base_ctl = pci_attr_r32(devind, PCI_BAR_2) & PCI_BAR_IO_MASK; if (base_cmd != REG_CMD_BASE0 && base_cmd != REG_CMD_BASE1) { init_drive(&wini[w_next_drive], base_cmd, base_ctl+PCI_CTL_OFF, base_dma, irq, 1, irq_hook, 0); init_drive(&wini[w_next_drive+1], base_cmd, base_ctl+PCI_CTL_OFF, base_dma, irq, 1, irq_hook, 1); if (w_pci_debug) printf("at_wini%ld: atapci %d: 0x%x 0x%x irq %d\n", w_instance, devind, base_cmd, base_ctl, irq); w_next_drive += 2; } else printf("at_wini%ld: atapci: ignored drives on primary channel, base %x\n", w_instance, base_cmd); } else { /* Update base_dma for compatibility device */ for (i= 0; istate & IGNORING) return ENXIO; /* If we haven't identified it yet, or it's gone deaf, * (re-)identify it. */ if (!(wn->state & IDENTIFIED) || (wn->state & DEAF)) { /* Try to identify the device. */ if (w_identify() != OK) { #if VERBOSE printf("%s: probe failed\n", w_name()); #endif if (wn->state & DEAF){ int err = w_reset(); if( err != OK ){ return err; } } wn->state = IGNORING; return(ENXIO); } /* Do a test transaction unless it's a CD drive (then * we can believe the controller, and a test may fail * due to no CD being in the drive). If it fails, ignore * the device forever. */ if (!(wn->state & ATAPI) && w_io_test() != OK) { wn->state |= IGNORING; return(ENXIO); } } #if ENABLE_ATAPI if ((wn->state & ATAPI) && (access & W_BIT)) return(EACCES); #endif /* Partition the drive if it's being opened for the first time, * or being opened after being closed. */ if (wn->open_ct == 0) { #if ENABLE_ATAPI if (wn->state & ATAPI) { int r; if ((r = atapi_open()) != OK) return(r); } #endif /* Partition the disk. */ partition(&w_dtab, w_drive * DEV_PER_DRIVE, P_PRIMARY, wn->state & ATAPI); } wn->open_ct++; return(OK); } /*===========================================================================* * w_prepare * *===========================================================================*/ static struct device *w_prepare(dev_t device) { /* Prepare for I/O on a device. */ w_device = (int) device; if (device < NR_MINORS) { /* d0, d0p[0-3], d1, ... */ w_drive = device / DEV_PER_DRIVE; /* save drive number */ w_wn = &wini[w_drive]; w_dv = &w_wn->part[device % DEV_PER_DRIVE]; } else if ((unsigned) (device -= MINOR_d0p0s0) < NR_SUBDEVS) {/*d[0-7]p[0-3]s[0-3]*/ w_drive = device / SUB_PER_DRIVE; w_wn = &wini[w_drive]; w_dv = &w_wn->subpart[device % SUB_PER_DRIVE]; } else { w_device = -1; return(NULL); } return(w_dv); } /*===========================================================================* * w_part * *===========================================================================*/ static struct device *w_part(dev_t device) { /* Return a pointer to the partition information of the given minor device. */ return w_prepare(device); } #define id_byte(n) (&tmp_buf[2 * (n)]) #define id_word(n) (((u16_t) id_byte(n)[0] << 0) \ |((u16_t) id_byte(n)[1] << 8)) #define id_longword(n) (((u32_t) id_byte(n)[0] << 0) \ |((u32_t) id_byte(n)[1] << 8) \ |((u32_t) id_byte(n)[2] << 16) \ |((u32_t) id_byte(n)[3] << 24)) /*===========================================================================* * check_dma * *===========================================================================*/ static void check_dma(struct wini *wn) { u32_t dma_status, dma_base; int id_dma, ultra_dma; u16_t w; wn->dma= 0; if (disable_dma) return; w= id_word(ID_CAPABILITIES); id_dma= !!(w & ID_CAP_DMA); w= id_byte(ID_FIELD_VALIDITY)[0]; ultra_dma= !!(w & ID_FV_88); dma_base= wn->base_dma; if (dma_base) { if (sys_inb(dma_base + DMA_STATUS, &dma_status) != OK) { panic("unable to read DMA status register"); } } if (id_dma && dma_base) { w= id_word(ID_MULTIWORD_DMA); if (w_pci_debug && (w & (ID_MWDMA_2_SUP|ID_MWDMA_1_SUP|ID_MWDMA_0_SUP))) { printf( "%s: multiword DMA modes supported:%s%s%s\n", w_name(), (w & ID_MWDMA_0_SUP) ? " 0" : "", (w & ID_MWDMA_1_SUP) ? " 1" : "", (w & ID_MWDMA_2_SUP) ? " 2" : ""); } if (w_pci_debug && (w & (ID_MWDMA_0_SEL|ID_MWDMA_1_SEL|ID_MWDMA_2_SEL))) { printf( "%s: multiword DMA mode selected:%s%s%s\n", w_name(), (w & ID_MWDMA_0_SEL) ? " 0" : "", (w & ID_MWDMA_1_SEL) ? " 1" : "", (w & ID_MWDMA_2_SEL) ? " 2" : ""); } if (w_pci_debug && ultra_dma) { w= id_word(ID_ULTRA_DMA); if (w & (ID_UDMA_0_SUP|ID_UDMA_1_SUP| ID_UDMA_2_SUP|ID_UDMA_3_SUP| ID_UDMA_4_SUP|ID_UDMA_5_SUP)) { printf( "%s: Ultra DMA modes supported:%s%s%s%s%s%s\n", w_name(), (w & ID_UDMA_0_SUP) ? " 0" : "", (w & ID_UDMA_1_SUP) ? " 1" : "", (w & ID_UDMA_2_SUP) ? " 2" : "", (w & ID_UDMA_3_SUP) ? " 3" : "", (w & ID_UDMA_4_SUP) ? " 4" : "", (w & ID_UDMA_5_SUP) ? " 5" : ""); } if (w & (ID_UDMA_0_SEL|ID_UDMA_1_SEL| ID_UDMA_2_SEL|ID_UDMA_3_SEL| ID_UDMA_4_SEL|ID_UDMA_5_SEL)) { printf( "%s: Ultra DMA mode selected:%s%s%s%s%s%s\n", w_name(), (w & ID_UDMA_0_SEL) ? " 0" : "", (w & ID_UDMA_1_SEL) ? " 1" : "", (w & ID_UDMA_2_SEL) ? " 2" : "", (w & ID_UDMA_3_SEL) ? " 3" : "", (w & ID_UDMA_4_SEL) ? " 4" : "", (w & ID_UDMA_5_SEL) ? " 5" : ""); } } wn->dma= 1; } else if (id_dma || dma_base) { printf("id_dma %d, dma_base 0x%x\n", id_dma, dma_base); } else printf("no DMA support\n"); } /*===========================================================================* * w_identify * *===========================================================================*/ static int w_identify(void) { /* Find out if a device exists, if it is an old AT disk, or a newer ATA * drive, a removable media device, etc. */ struct wini *wn = w_wn; struct command cmd; int s; u16_t w; unsigned long size; int prev_wakeup; int r; /* Try to identify the device. */ cmd.ldh = wn->ldhpref; cmd.command = ATA_IDENTIFY; /* In testing mode, a drive will get ignored at the first timeout. */ w_testing = 1; /* Execute *_IDENTIFY with configured *_IDENTIFY timeout. */ prev_wakeup = wakeup_ticks; wakeup_ticks = w_identify_wakeup_ticks; r = com_simple(&cmd); if (r == OK && w_waitfor(STATUS_DRQ, STATUS_DRQ) && !(wn->w_status & (STATUS_ERR|STATUS_WF))) { /* Device information. */ if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, SECTOR_SIZE)) != OK) panic("Call to sys_insw() failed: %d", s); #if 0 if (id_word(0) & ID_GEN_NOT_ATA) { printf("%s: not an ATA device?\n", w_name()); wakeup_ticks = prev_wakeup; w_testing = 0; return ERR; } #endif /* This is an ATA device. */ wn->state |= SMART; /* Preferred CHS translation mode. */ wn->pcylinders = id_word(1); wn->pheads = id_word(3); wn->psectors = id_word(6); size = (u32_t) wn->pcylinders * wn->pheads * wn->psectors; w= id_word(ID_CAPABILITIES); if ((w & ID_CAP_LBA) && size > 512L*1024*2) { /* Drive is LBA capable and is big enough to trust it to * not make a mess of it. */ wn->ldhpref |= LDH_LBA; size = id_longword(60); w= id_word(ID_CSS); if (size < LBA48_CHECK_SIZE) { /* No need to check for LBA48 */ } else if (w & ID_CSS_LBA48) { /* Drive is LBA48 capable (and LBA48 is turned on). */ if (id_longword(102)) { /* If no. of sectors doesn't fit in 32 bits, * trunacte to this. So it's LBA32 for now. * This can still address devices up to 2TB * though. */ size = ULONG_MAX; } else { /* Actual number of sectors fits in 32 bits. */ size = id_longword(100); } wn->lba48 = 1; } check_dma(wn); } if (wn->lcylinders == 0 || wn->lheads == 0 || wn->lsectors == 0) { /* No BIOS parameters? Then make some up. */ wn->lcylinders = wn->pcylinders; wn->lheads = wn->pheads; wn->lsectors = wn->psectors; while (wn->lcylinders > 1024) { wn->lheads *= 2; wn->lcylinders /= 2; } } #if ENABLE_ATAPI } else if (cmd.command = ATAPI_IDENTIFY, com_simple(&cmd) == OK && w_waitfor(STATUS_DRQ, STATUS_DRQ) && !(wn->w_status & (STATUS_ERR|STATUS_WF))) { /* An ATAPI device. */ wn->state |= ATAPI; /* Device information. */ if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, 512)) != OK) panic("Call to sys_insw() failed: %d", s); size = 0; /* Size set later. */ check_dma(wn); #endif } else { /* Not an ATA device; no translations, no special features. Don't * touch it unless the BIOS knows about it. */ if (wn->lcylinders == 0) { wakeup_ticks = prev_wakeup; w_testing = 0; return(ERR); } /* no BIOS parameters */ wn->pcylinders = wn->lcylinders; wn->pheads = wn->lheads; wn->psectors = wn->lsectors; size = (u32_t) wn->pcylinders * wn->pheads * wn->psectors; } /* Restore wakeup_ticks and unset testing mode. */ wakeup_ticks = prev_wakeup; w_testing = 0; /* Size of the whole drive */ wn->part[0].dv_size = mul64u(size, SECTOR_SIZE); /* Reset/calibrate (where necessary) */ if (w_specify() != OK && w_specify() != OK) { return(ERR); } if (wn->irq == NO_IRQ) { /* Everything looks OK; register IRQ so we can stop polling. */ wn->irq = w_drive < 2 ? AT_WINI_0_IRQ : AT_WINI_1_IRQ; wn->irq_hook_id = wn->irq; /* id to be returned if interrupt occurs */ if ((s=sys_irqsetpolicy(wn->irq, IRQ_REENABLE, &wn->irq_hook_id)) != OK) panic("couldn't set IRQ policy: %d", s); if ((s=sys_irqenable(&wn->irq_hook_id)) != OK) panic("couldn't enable IRQ line: %d", s); } wn->state |= IDENTIFIED; return(OK); } /*===========================================================================* * w_name * *===========================================================================*/ static char *w_name(void) { /* Return a name for the current device. */ static char name[] = "AT0-D0"; name[2] = '0' + w_instance; name[5] = '0' + w_drive; return name; } /*===========================================================================* * w_io_test * *===========================================================================*/ static int w_io_test(void) { int save_dev; int save_timeout, save_errors, save_wakeup; iovec_t iov; static char *buf; ssize_t r; #ifdef CD_SECTOR_SIZE #define BUFSIZE CD_SECTOR_SIZE #else #define BUFSIZE SECTOR_SIZE #endif STATICINIT(buf, BUFSIZE); iov.iov_addr = (vir_bytes) buf; iov.iov_size = BUFSIZE; save_dev = w_device; /* Reduce timeout values for this test transaction. */ save_timeout = timeout_usecs; save_errors = max_errors; save_wakeup = wakeup_ticks; if (!w_standard_timeouts) { timeout_usecs = 4000000; wakeup_ticks = system_hz * 6; max_errors = 3; } w_testing = 1; /* Try I/O on the actual drive (not any (sub)partition). */ r = w_transfer(w_drive * DEV_PER_DRIVE, FALSE /*do_write*/, cvu64(0), SELF, &iov, 1, BDEV_NOFLAGS); /* Switch back. */ if (w_prepare(save_dev) == NULL) panic("Couldn't switch back devices"); /* Restore parameters. */ timeout_usecs = save_timeout; max_errors = save_errors; wakeup_ticks = save_wakeup; w_testing = 0; /* Test if everything worked. */ if (r != BUFSIZE) { return ERR; } /* Everything worked. */ return OK; } /*===========================================================================* * w_specify * *===========================================================================*/ static int w_specify(void) { /* Routine to initialize the drive after boot or when a reset is needed. */ struct wini *wn = w_wn; struct command cmd; if ((wn->state & DEAF) && w_reset() != OK) { return(ERR); } if (!(wn->state & ATAPI)) { /* Specify parameters: precompensation, number of heads and sectors. */ cmd.precomp = wn->precomp; cmd.count = wn->psectors; cmd.ldh = w_wn->ldhpref | (wn->pheads - 1); cmd.command = CMD_SPECIFY; /* Specify some parameters */ /* Output command block and see if controller accepts the parameters. */ if (com_simple(&cmd) != OK) return(ERR); if (!(wn->state & SMART)) { /* Calibrate an old disk. */ cmd.sector = 0; cmd.cyl_lo = 0; cmd.cyl_hi = 0; cmd.ldh = w_wn->ldhpref; cmd.command = CMD_RECALIBRATE; if (com_simple(&cmd) != OK) return(ERR); } } wn->state |= INITIALIZED; return(OK); } /*===========================================================================* * do_transfer * *===========================================================================*/ static int do_transfer(const struct wini *wn, unsigned int precomp, unsigned int count, unsigned int sector, unsigned int do_write, int do_dma) { struct command cmd; unsigned int sector_high; unsigned secspcyl = wn->pheads * wn->psectors; int do_lba48; sector_high= 0; /* For future extensions */ do_lba48= 0; if (sector >= LBA48_CHECK_SIZE || sector_high != 0) { if (wn->lba48) do_lba48= 1; else if (sector > LBA_MAX_SIZE || sector_high != 0) { /* Strange sector count for LBA device */ return EIO; } } cmd.precomp = precomp; cmd.count = count; if (do_dma) { cmd.command = do_write ? CMD_WRITE_DMA : CMD_READ_DMA; } else cmd.command = do_write ? CMD_WRITE : CMD_READ; if (do_lba48) { if (do_dma) { cmd.command = (do_write ? CMD_WRITE_DMA_EXT : CMD_READ_DMA_EXT); } else { cmd.command = (do_write ? CMD_WRITE_EXT : CMD_READ_EXT); } cmd.count_prev= (count >> 8); cmd.sector = (sector >> 0) & 0xFF; cmd.cyl_lo = (sector >> 8) & 0xFF; cmd.cyl_hi = (sector >> 16) & 0xFF; cmd.sector_prev= (sector >> 24) & 0xFF; cmd.cyl_lo_prev= (sector_high) & 0xFF; cmd.cyl_hi_prev= (sector_high >> 8) & 0xFF; cmd.ldh = wn->ldhpref; return com_out_ext(&cmd); } else if (wn->ldhpref & LDH_LBA) { cmd.sector = (sector >> 0) & 0xFF; cmd.cyl_lo = (sector >> 8) & 0xFF; cmd.cyl_hi = (sector >> 16) & 0xFF; cmd.ldh = wn->ldhpref | ((sector >> 24) & 0xF); } else { int cylinder, head, sec; cylinder = sector / secspcyl; head = (sector % secspcyl) / wn->psectors; sec = sector % wn->psectors; cmd.sector = sec + 1; cmd.cyl_lo = cylinder & BYTE; cmd.cyl_hi = (cylinder >> 8) & BYTE; cmd.ldh = wn->ldhpref | head; } return com_out(&cmd); } static void stop_dma(const struct wini *wn) { int r; /* Stop bus master operation */ r= sys_outb(wn->base_dma + DMA_COMMAND, 0); if (r != 0) panic("stop_dma: sys_outb failed: %d", r); } static void start_dma(const struct wini *wn, int do_write) { u32_t v; int r; /* Assume disk reads. Start DMA */ v= DMA_CMD_START; if (!do_write) { /* Disk reads generate PCI write cycles. */ v |= DMA_CMD_WRITE; } r= sys_outb(wn->base_dma + DMA_COMMAND, v); if (r != 0) panic("start_dma: sys_outb failed: %d", r); } static int error_dma(const struct wini *wn) { int r; u32_t v; #define DMAERR(msg) \ printf("at_wini%ld: bad DMA: %s. Disabling DMA for drive %d.\n", \ w_instance, msg, wn - wini); \ printf("at_wini%ld: workaround: set %s=1 in boot monitor.\n", \ w_instance, NO_DMA_VAR); \ return 1; \ r= sys_inb(wn->base_dma + DMA_STATUS, &v); if (r != 0) panic("w_transfer: sys_inb failed: %d", r); if (!wn->dma_intseen) { /* DMA did not complete successfully */ if (v & DMA_ST_BM_ACTIVE) { DMAERR("DMA did not complete"); } else if (v & DMA_ST_ERROR) { DMAERR("DMA error"); } else { DMAERR("DMA buffer too small"); } } else if ((v & DMA_ST_BM_ACTIVE)) { DMAERR("DMA buffer too large"); } return 0; } /*===========================================================================* * w_transfer * *===========================================================================*/ static ssize_t w_transfer( dev_t minor, /* minor device to perform the transfer on */ int do_write, /* read or write? */ u64_t position, /* offset on device to read or write */ endpoint_t proc_nr, /* process doing the request */ iovec_t *iov, /* pointer to read or write request vector */ unsigned int nr_req, /* length of request vector */ int UNUSED(flags) /* transfer flags */ ) { struct wini *wn; iovec_t *iop, *iov_end = iov + nr_req; int n, r, s, errors, do_dma; unsigned long block; u32_t w_status; u64_t dv_size; unsigned nbytes; unsigned dma_buf_offset; ssize_t total = 0; size_t addr_offset = 0; if (w_prepare(minor) == NULL) return(ENXIO); wn = w_wn; dv_size = w_dv->dv_size; #if ENABLE_ATAPI if (w_wn->state & ATAPI) { return atapi_transfer(do_write, position, proc_nr, iov, nr_req); } #endif /* Check disk address. */ if (rem64u(position, SECTOR_SIZE) != 0) return(EINVAL); errors = 0; while (nr_req > 0) { /* How many bytes to transfer? */ nbytes = 0; for (iop = iov; iop < iov_end; iop++) nbytes += iop->iov_size; if ((nbytes & SECTOR_MASK) != 0) return(EINVAL); /* Which block on disk and how close to EOF? */ if (cmp64(position, dv_size) >= 0) return(total); /* At EOF */ if (cmp64(add64ul(position, nbytes), dv_size) > 0) nbytes = diff64(dv_size, position); block = div64u(add64(w_dv->dv_base, position), SECTOR_SIZE); do_dma= wn->dma; if (nbytes >= wn->max_count) { /* The drive can't do more then max_count at once. */ nbytes = wn->max_count; } /* First check to see if a reinitialization is needed. */ if (!(wn->state & INITIALIZED) && w_specify() != OK) return(EIO); if (do_dma) { stop_dma(wn); if (!setup_dma(&nbytes, proc_nr, iov, addr_offset, do_write)) { do_dma = 0; } #if 0 printf("nbytes = %d\n", nbytes); #endif } /* Tell the controller to transfer nbytes bytes. */ r = do_transfer(wn, wn->precomp, (nbytes >> SECTOR_SHIFT), block, do_write, do_dma); if (do_dma) start_dma(wn, do_write); if (do_write) { /* The specs call for a 400 ns wait after issuing the command. * Reading the alternate status register is the suggested * way to implement this wait. */ if (sys_inb((wn->base_ctl+REG_CTL_ALTSTAT), &w_status) != OK) panic("couldn't get status"); } if (do_dma) { /* Wait for the interrupt, check DMA status and optionally * copy out. */ wn->dma_intseen = 0; if ((r = at_intr_wait()) != OK) { /* Don't retry if sector marked bad or too many * errors. */ if (r == ERR_BAD_SECTOR || ++errors == max_errors) { w_command = CMD_IDLE; return(EIO); } continue; } /* Wait for DMA_ST_INT to get set */ if(!wn->dma_intseen) { if(w_waitfor_dma(DMA_ST_INT, DMA_ST_INT)) wn->dma_intseen = 1; } if(error_dma(wn)) { wn->dma = 0; continue; } stop_dma(wn); dma_buf_offset= 0; while (r == OK && nbytes > 0) { n= iov->iov_size; if (n > nbytes) n= nbytes; /* Book the bytes successfully transferred. */ nbytes -= n; position= add64ul(position, n); total += n; addr_offset += n; if ((iov->iov_size -= n) == 0) { iov++; nr_req--; addr_offset = 0; } dma_buf_offset += n; } } while (r == OK && nbytes > 0) { /* For each sector, wait for an interrupt and fetch the data * (read), or supply data to the controller and wait for an * interrupt (write). */ if (!do_write) { /* First an interrupt, then data. */ if ((r = at_intr_wait()) != OK) { /* An error, send data to the bit bucket. */ if (w_wn->w_status & STATUS_DRQ) { if ((s=sys_insw(wn->base_cmd+REG_DATA, SELF, tmp_buf, SECTOR_SIZE)) != OK) { panic("Call to sys_insw() failed: %d", s); } } break; } } /* Wait for busy to clear. */ if (!w_waitfor(STATUS_BSY, 0)) { r = ERR; break; } /* Wait for data transfer requested. */ if (!w_waitfor(STATUS_DRQ, STATUS_DRQ)) { r = ERR; break; } /* Copy bytes to or from the device's buffer. */ if (!do_write) { if(proc_nr != SELF) { s=sys_safe_insw(wn->base_cmd + REG_DATA, proc_nr, (void *) (iov->iov_addr), addr_offset, SECTOR_SIZE); } else { s=sys_insw(wn->base_cmd + REG_DATA, proc_nr, (void *) (iov->iov_addr + addr_offset), SECTOR_SIZE); } if(s != OK) { panic("Call to sys_insw() failed: %d", s); } } else { if(proc_nr != SELF) { s=sys_safe_outsw(wn->base_cmd + REG_DATA, proc_nr, (void *) (iov->iov_addr), addr_offset, SECTOR_SIZE); } else { s=sys_outsw(wn->base_cmd + REG_DATA, proc_nr, (void *) (iov->iov_addr + addr_offset), SECTOR_SIZE); } if(s != OK) { panic("Call to sys_outsw() failed: %d", s); } /* Data sent, wait for an interrupt. */ if ((r = at_intr_wait()) != OK) break; } /* Book the bytes successfully transferred. */ nbytes -= SECTOR_SIZE; position= add64u(position, SECTOR_SIZE); addr_offset += SECTOR_SIZE; total += SECTOR_SIZE; if ((iov->iov_size -= SECTOR_SIZE) == 0) { iov++; nr_req--; addr_offset = 0; } } /* Any errors? */ if (r != OK) { /* Don't retry if sector marked bad or too many errors. */ if (r == ERR_BAD_SECTOR || ++errors == max_errors) { w_command = CMD_IDLE; return(EIO); } } } w_command = CMD_IDLE; return(total); } /*===========================================================================* * com_out * *===========================================================================*/ static int com_out(cmd) struct command *cmd; /* Command block */ { /* Output the command block to the winchester controller and return status */ struct wini *wn = w_wn; unsigned base_cmd = wn->base_cmd; unsigned base_ctl = wn->base_ctl; pvb_pair_t outbyte[7]; /* vector for sys_voutb() */ int s; /* status for sys_(v)outb() */ if (w_wn->state & IGNORING) return ERR; if (!w_waitfor(STATUS_BSY, 0)) { printf("%s: controller not ready\n", w_name()); return(ERR); } /* Select drive. */ if ((s=sys_outb(base_cmd + REG_LDH, cmd->ldh)) != OK) panic("Couldn't write register to select drive: %d", s); if (!w_waitfor(STATUS_BSY, 0)) { printf("%s: com_out: drive not ready\n", w_name()); return(ERR); } /* Schedule a wakeup call, some controllers are flaky. This is done with a * synchronous alarm. If a timeout occurs a notify from CLOCK is sent, so that * w_intr_wait() can call w_timeout() in case the controller was not able to * execute the command. Leftover timeouts are simply ignored by the main loop. */ sys_setalarm(wakeup_ticks, 0); wn->w_status = STATUS_ADMBSY; w_command = cmd->command; pv_set(outbyte[0], base_ctl + REG_CTL, wn->pheads >= 8 ? CTL_EIGHTHEADS : 0); pv_set(outbyte[1], base_cmd + REG_PRECOMP, cmd->precomp); pv_set(outbyte[2], base_cmd + REG_COUNT, cmd->count); pv_set(outbyte[3], base_cmd + REG_SECTOR, cmd->sector); pv_set(outbyte[4], base_cmd + REG_CYL_LO, cmd->cyl_lo); pv_set(outbyte[5], base_cmd + REG_CYL_HI, cmd->cyl_hi); pv_set(outbyte[6], base_cmd + REG_COMMAND, cmd->command); if ((s=sys_voutb(outbyte,7)) != OK) panic("Couldn't write registers with sys_voutb(): %d", s); return(OK); } /*===========================================================================* * com_out_ext * *===========================================================================*/ static int com_out_ext(cmd) struct command *cmd; /* Command block */ { /* Output the command block to the winchester controller and return status */ struct wini *wn = w_wn; unsigned base_cmd = wn->base_cmd; unsigned base_ctl = wn->base_ctl; pvb_pair_t outbyte[11]; /* vector for sys_voutb() */ int s; /* status for sys_(v)outb() */ if (w_wn->state & IGNORING) return ERR; if (!w_waitfor(STATUS_BSY, 0)) { printf("%s: controller not ready\n", w_name()); return(ERR); } /* Select drive. */ if ((s=sys_outb(base_cmd + REG_LDH, cmd->ldh)) != OK) panic("Couldn't write register to select drive: %d", s); if (!w_waitfor(STATUS_BSY, 0)) { printf("%s: com_out: drive not ready\n", w_name()); return(ERR); } /* Schedule a wakeup call, some controllers are flaky. This is done with a * synchronous alarm. If a timeout occurs a notify from CLOCK is sent, so that * w_intr_wait() can call w_timeout() in case the controller was not able to * execute the command. Leftover timeouts are simply ignored by the main loop. */ sys_setalarm(wakeup_ticks, 0); wn->w_status = STATUS_ADMBSY; w_command = cmd->command; pv_set(outbyte[0], base_ctl + REG_CTL, 0); pv_set(outbyte[1], base_cmd + REG_COUNT, cmd->count_prev); pv_set(outbyte[2], base_cmd + REG_SECTOR, cmd->sector_prev); pv_set(outbyte[3], base_cmd + REG_CYL_LO, cmd->cyl_lo_prev); pv_set(outbyte[4], base_cmd + REG_CYL_HI, cmd->cyl_hi_prev); pv_set(outbyte[5], base_cmd + REG_COUNT, cmd->count); pv_set(outbyte[6], base_cmd + REG_SECTOR, cmd->sector); pv_set(outbyte[7], base_cmd + REG_CYL_LO, cmd->cyl_lo); pv_set(outbyte[8], base_cmd + REG_CYL_HI, cmd->cyl_hi); pv_set(outbyte[9], base_cmd + REG_COMMAND, cmd->command); if ((s=sys_voutb(outbyte, 10)) != OK) panic("Couldn't write registers with sys_voutb(): %d", s); return(OK); } /*===========================================================================* * setup_dma * *===========================================================================*/ static int setup_dma( unsigned *sizep, endpoint_t proc_nr, iovec_t *iov, size_t addr_offset, int UNUSED(do_write) ) { phys_bytes user_phys; unsigned n, offset, size; int i, j, r; u32_t v; struct wini *wn = w_wn; /* First try direct scatter/gather to the supplied buffers */ size= *sizep; i= 0; /* iov index */ j= 0; /* prdt index */ offset= 0; /* Offset in current iov */ #if VERBOSE_DMA printf("at_wini: setup_dma: proc_nr %d\n", proc_nr); #endif while (size > 0) { #if VERBOSE_DMA printf( "at_wini: setup_dma: iov[%d]: addr 0x%lx, size %ld offset %d, size %d\n", i, iov[i].iov_addr, iov[i].iov_size, offset, size); #endif n= iov[i].iov_size-offset; if (n > size) n= size; if (n == 0 || (n & 1)) panic("bad size in iov: %d", iov[i].iov_size); if(proc_nr != SELF) { r= sys_umap(proc_nr, VM_GRANT, iov[i].iov_addr, n, &user_phys); if (r != 0) panic("can't map user buffer (VM_GRANT): %d", r); user_phys += offset + addr_offset; } else { r= sys_umap(proc_nr, VM_D, iov[i].iov_addr+offset+addr_offset, n, &user_phys); if (r != 0) panic("can't map user buffer (VM_D): %d", r); } if (user_phys & 1) { /* Buffer is not aligned */ printf("setup_dma: user buffer is not aligned\n"); return 0; } /* vector is not allowed to cross a 64K boundary */ if (user_phys/0x10000 != (user_phys+n-1)/0x10000) n= ((user_phys/0x10000)+1)*0x10000 - user_phys; /* vector is not allowed to be bigger than 64K, but we get that * for free. */ if (j >= N_PRDTE) { /* Too many entries */ printf("setup_dma: user buffer has too many entries\n"); return 0; } prdt[j].prdte_base= user_phys; prdt[j].prdte_count= n; prdt[j].prdte_reserved= 0; prdt[j].prdte_flags= 0; j++; offset += n; if (offset >= iov[i].iov_size) { i++; offset= 0; addr_offset= 0; } size -= n; } if (j <= 0 || j > N_PRDTE) panic("bad prdt index: %d", j); prdt[j-1].prdte_flags |= PRDTE_FL_EOT; #if VERBOSE_DMA printf("dma not bad\n"); for (i= 0; ibase_dma + DMA_STATUS, &v); if (r != 0) panic("setup_dma: sys_inb failed: %d", r); if (v & DMA_ST_BM_ACTIVE) panic("Bus master IDE active"); if (prdt_phys & 3) panic("prdt not aligned: %d", prdt_phys); r= sys_outl(wn->base_dma + DMA_PRDTP, prdt_phys); if (r != 0) panic("setup_dma: sys_outl failed: %d", r); /* Clear interrupt and error flags */ r= sys_outb(wn->base_dma + DMA_STATUS, DMA_ST_INT | DMA_ST_ERROR); if (r != 0) panic("setup_dma: sys_outb failed: %d", r); return 1; } /*===========================================================================* * w_need_reset * *===========================================================================*/ static void w_need_reset(void) { /* The controller needs to be reset. */ struct wini *wn; for (wn = wini; wn < &wini[MAX_DRIVES]; wn++) { if (wn->base_cmd == w_wn->base_cmd) { wn->state |= DEAF; wn->state &= ~INITIALIZED; } } } /*===========================================================================* * w_do_close * *===========================================================================*/ static int w_do_close(dev_t minor) { /* Device close: Release a device. */ if (w_prepare(minor) == NULL) return(ENXIO); w_wn->open_ct--; #if ENABLE_ATAPI if (w_wn->open_ct == 0 && (w_wn->state & ATAPI)) atapi_close(); #endif return(OK); } /*===========================================================================* * com_simple * *===========================================================================*/ static int com_simple(cmd) struct command *cmd; /* Command block */ { /* A simple controller command, only one interrupt and no data-out phase. */ int r; if (w_wn->state & IGNORING) return ERR; if ((r = com_out(cmd)) == OK) r = at_intr_wait(); w_command = CMD_IDLE; return(r); } /*===========================================================================* * w_timeout * *===========================================================================*/ static void w_timeout(void) { struct wini *wn = w_wn; switch (w_command) { case CMD_IDLE: break; /* fine */ case CMD_READ: case CMD_READ_EXT: case CMD_WRITE: case CMD_WRITE_EXT: /* Impossible, but not on PC's: The controller does not respond. */ /* Limiting multisector I/O seems to help. */ if (wn->max_count > 8 * SECTOR_SIZE) { wn->max_count = 8 * SECTOR_SIZE; } else { wn->max_count = SECTOR_SIZE; } /*FALL THROUGH*/ default: /* Some other command. */ if (w_testing) wn->state |= IGNORING; /* Kick out this drive. */ else if (!w_silent) printf("%s: timeout on command 0x%02x\n", w_name(), w_command); w_need_reset(); wn->w_status = 0; } } /*===========================================================================* * w_reset * *===========================================================================*/ static int w_reset(void) { /* Issue a reset to the controller. This is done after any catastrophe, * like the controller refusing to respond. */ int s; struct wini *wn = w_wn; /* Don't bother if this drive is forgotten. */ if (w_wn->state & IGNORING) return ERR; /* Wait for any internal drive recovery. */ tickdelay(RECOVERY_TICKS); /* Strobe reset bit */ if ((s=sys_outb(wn->base_ctl + REG_CTL, CTL_RESET)) != OK) panic("Couldn't strobe reset bit: %d", s); tickdelay(DELAY_TICKS); if ((s=sys_outb(wn->base_ctl + REG_CTL, 0)) != OK) panic("Couldn't strobe reset bit: %d", s); tickdelay(DELAY_TICKS); /* Wait for controller ready */ if (!w_waitfor(STATUS_BSY, 0)) { printf("%s: reset failed, drive busy\n", w_name()); return(ERR); } /* The error register should be checked now, but some drives mess it up. */ for (wn = wini; wn < &wini[MAX_DRIVES]; wn++) { if (wn->base_cmd == w_wn->base_cmd) { wn->state &= ~DEAF; if (w_wn->irq_need_ack) { /* Make sure irq is actually enabled.. */ sys_irqenable(&w_wn->irq_hook_id); } } } return(OK); } /*===========================================================================* * w_intr_wait * *===========================================================================*/ static void w_intr_wait(void) { /* Wait for a task completion interrupt. */ int r; u32_t w_status; message m; int ipc_status; if (w_wn->irq != NO_IRQ) { /* Wait for an interrupt that sets w_status to "not busy". * (w_timeout() also clears w_status.) */ while (w_wn->w_status & (STATUS_ADMBSY|STATUS_BSY)) { int rr; if((rr=driver_receive(ANY, &m, &ipc_status)) != OK) panic("driver_receive failed: %d", rr); if (is_ipc_notify(ipc_status)) { switch (_ENDPOINT_P(m.m_source)) { case CLOCK: /* Timeout. */ w_timeout(); /* a.o. set w_status */ break; case HARDWARE: /* Interrupt. */ r= sys_inb(w_wn->base_cmd + REG_STATUS, &w_status); if (r != 0) panic("sys_inb failed: %d", r); w_wn->w_status= w_status; ack_irqs(m.NOTIFY_ARG); break; default: /* * unhandled message. queue it and * handle it in the blockdriver loop. */ blockdriver_mq_queue(&m, ipc_status); } } else { /* * unhandled message. queue it and handle it in the * blockdriver loop. */ blockdriver_mq_queue(&m, ipc_status); } } } else { /* Interrupt not yet allocated; use polling. */ (void) w_waitfor(STATUS_BSY, 0); } } /*===========================================================================* * at_intr_wait * *===========================================================================*/ static int at_intr_wait(void) { /* Wait for an interrupt, study the status bits and return error/success. */ int r, s; u32_t inbval; w_intr_wait(); if ((w_wn->w_status & (STATUS_BSY | STATUS_WF | STATUS_ERR)) == 0) { r = OK; } else { if ((s=sys_inb(w_wn->base_cmd + REG_ERROR, &inbval)) != OK) panic("Couldn't read register: %d", s); if ((w_wn->w_status & STATUS_ERR) && (inbval & ERROR_BB)) { r = ERR_BAD_SECTOR; /* sector marked bad, retries won't help */ } else { r = ERR; /* any other error */ } } w_wn->w_status |= STATUS_ADMBSY; /* assume still busy with I/O */ return(r); } /*===========================================================================* * w_waitfor * *===========================================================================*/ static int w_waitfor(mask, value) int mask; /* status mask */ int value; /* required status */ { /* Wait until controller is in the required state. Return zero on timeout. */ u32_t w_status; spin_t spin; int s; SPIN_FOR(&spin, timeout_usecs) { if ((s=sys_inb(w_wn->base_cmd + REG_STATUS, &w_status)) != OK) panic("Couldn't read register: %d", s); w_wn->w_status= w_status; if ((w_wn->w_status & mask) == value) { return 1; } } w_need_reset(); /* controller gone deaf */ return(0); } /*===========================================================================* * w_waitfor_dma * *===========================================================================*/ static int w_waitfor_dma(mask, value) int mask; /* status mask */ int value; /* required status */ { /* Wait until controller is in the required state. Return zero on timeout. */ u32_t w_status; spin_t spin; int s; SPIN_FOR(&spin, timeout_usecs) { if ((s=sys_inb(w_wn->base_dma + DMA_STATUS, &w_status)) != OK) panic("Couldn't read register: %d", s); if ((w_status & mask) == value) { return 1; } } return(0); } /*===========================================================================* * w_geometry * *===========================================================================*/ static void w_geometry(dev_t minor, struct partition *entry) { struct wini *wn; if (w_prepare(minor) == NULL) return; wn = w_wn; if (wn->state & ATAPI) { /* Make up some numbers. */ entry->cylinders = div64u(wn->part[0].dv_size, SECTOR_SIZE) / (64*32); entry->heads = 64; entry->sectors = 32; } else { /* Return logical geometry. */ entry->cylinders = wn->lcylinders; entry->heads = wn->lheads; entry->sectors = wn->lsectors; } } #if ENABLE_ATAPI /*===========================================================================* * atapi_open * *===========================================================================*/ static int atapi_open(void) { /* Should load and lock the device and obtain its size. For now just set the * size of the device to something big. What is really needed is a generic * SCSI layer that does all this stuff for ATAPI and SCSI devices (kjb). (XXX) */ w_wn->part[0].dv_size = mul64u(800L*1024, 1024); return(OK); } /*===========================================================================* * atapi_close * *===========================================================================*/ static void atapi_close(void) { /* Should unlock the device. For now do nothing. (XXX) */ } static void sense_request(void) { int r, i; static u8_t sense[100], packet[ATAPI_PACKETSIZE]; packet[0] = SCSI_SENSE; packet[1] = 0; packet[2] = 0; packet[3] = 0; packet[4] = SENSE_PACKETSIZE; packet[5] = 0; packet[7] = 0; packet[8] = 0; packet[9] = 0; packet[10] = 0; packet[11] = 0; for(i = 0; i < SENSE_PACKETSIZE; i++) sense[i] = 0xff; r = atapi_sendpacket(packet, SENSE_PACKETSIZE, 0); if (r != OK) { printf("request sense command failed\n"); return; } if (atapi_intr_wait(0, 0) <= 0) { printf("WARNING: request response failed\n"); } if (sys_insw(w_wn->base_cmd + REG_DATA, SELF, (void *) sense, SENSE_PACKETSIZE) != OK) printf("WARNING: sense reading failed\n"); printf("sense data:"); for(i = 0; i < SENSE_PACKETSIZE; i++) printf(" %02x", sense[i]); printf("\n"); } /*===========================================================================* * atapi_transfer * *===========================================================================*/ static int atapi_transfer( int do_write, /* read or write? */ u64_t position, /* offset on device to read or write */ endpoint_t proc_nr, /* process doing the request */ iovec_t *iov, /* pointer to read or write request vector */ unsigned int nr_req /* length of request vector */ ) { struct wini *wn = w_wn; iovec_t *iop, *iov_end = iov + nr_req; int r, s, errors, fresh; u64_t pos; unsigned long block; u64_t dv_size = w_dv->dv_size; unsigned nbytes, nblocks, before, chunk; static u8_t packet[ATAPI_PACKETSIZE]; size_t addr_offset = 0; int dmabytes = 0, piobytes = 0; ssize_t total = 0; if (do_write) return(EINVAL); errors = fresh = 0; while (nr_req > 0 && !fresh) { int do_dma = wn->dma && w_atapi_dma; /* The Minix block size is smaller than the CD block size, so we * may have to read extra before or after the good data. */ pos = add64(w_dv->dv_base, position); block = div64u(pos, CD_SECTOR_SIZE); before = rem64u(pos, CD_SECTOR_SIZE); if(before) do_dma = 0; /* How many bytes to transfer? */ nbytes = 0; for (iop = iov; iop < iov_end; iop++) { nbytes += iop->iov_size; if(iop->iov_size % CD_SECTOR_SIZE) do_dma = 0; } /* Data comes in as words, so we have to enforce even byte counts. */ if ((before | nbytes) & 1) return(EINVAL); /* Which block on disk and how close to EOF? */ if (cmp64(position, dv_size) >= 0) return(total); /* At EOF */ if (cmp64(add64ul(position, nbytes), dv_size) > 0) nbytes = diff64(dv_size, position); nblocks = (before + nbytes + CD_SECTOR_SIZE - 1) / CD_SECTOR_SIZE; /* First check to see if a reinitialization is needed. */ if (!(wn->state & INITIALIZED) && w_specify() != OK) return(EIO); /* Build an ATAPI command packet. */ packet[0] = SCSI_READ10; packet[1] = 0; packet[2] = (block >> 24) & 0xFF; packet[3] = (block >> 16) & 0xFF; packet[4] = (block >> 8) & 0xFF; packet[5] = (block >> 0) & 0xFF; packet[6] = 0; packet[7] = (nblocks >> 8) & 0xFF; packet[8] = (nblocks >> 0) & 0xFF; packet[9] = 0; packet[10] = 0; packet[11] = 0; if(do_dma) { stop_dma(wn); if (!setup_dma(&nbytes, proc_nr, iov, addr_offset, 0)) { do_dma = 0; } else if(nbytes != nblocks * CD_SECTOR_SIZE) { stop_dma(wn); do_dma = 0; } } /* Tell the controller to execute the packet command. */ r = atapi_sendpacket(packet, nblocks * CD_SECTOR_SIZE, do_dma); if (r != OK) goto err; if(do_dma) { wn->dma_intseen = 0; start_dma(wn, 0); w_intr_wait(); if(!wn->dma_intseen) { if(w_waitfor_dma(DMA_ST_INT, DMA_ST_INT)) { wn->dma_intseen = 1; } } if(error_dma(wn)) { printf("Disabling DMA (ATAPI)\n"); wn->dma = 0; } else { dmabytes += nbytes; while (nbytes > 0) { vir_bytes chunk = nbytes; if (chunk > iov->iov_size) chunk = iov->iov_size; position= add64ul(position, chunk); nbytes -= chunk; total += chunk; if ((iov->iov_size -= chunk) == 0) { iov++; nr_req--; } } } continue; } /* Read chunks of data. */ while ((r = atapi_intr_wait(do_dma, nblocks * CD_SECTOR_SIZE)) > 0) { size_t count; count = r; while (before > 0 && count > 0) { /* Discard before. */ chunk = before; if (chunk > count) chunk = count; if (chunk > DMA_BUF_SIZE) chunk = DMA_BUF_SIZE; if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, chunk)) != OK) panic("Call to sys_insw() failed: %d", s); before -= chunk; count -= chunk; } while (nbytes > 0 && count > 0) { /* Requested data. */ chunk = nbytes; if (chunk > count) chunk = count; if (chunk > iov->iov_size) chunk = iov->iov_size; if(proc_nr != SELF) { s=sys_safe_insw(wn->base_cmd + REG_DATA, proc_nr, (void *) iov->iov_addr, addr_offset, chunk); } else { s=sys_insw(wn->base_cmd + REG_DATA, proc_nr, (void *) (iov->iov_addr + addr_offset), chunk); } if (s != OK) panic("Call to sys_insw() failed: %d", s); position= add64ul(position, chunk); nbytes -= chunk; count -= chunk; addr_offset += chunk; piobytes += chunk; fresh = 0; total += chunk; if ((iov->iov_size -= chunk) == 0) { iov++; nr_req--; fresh = 1; /* new element is optional */ addr_offset = 0; } } while (count > 0) { /* Excess data. */ chunk = count; if (chunk > DMA_BUF_SIZE) chunk = DMA_BUF_SIZE; if ((s=sys_insw(wn->base_cmd + REG_DATA, SELF, tmp_buf, chunk)) != OK) panic("Call to sys_insw() failed: %d", s); count -= chunk; } } if (r < 0) { err: /* Don't retry if too many errors. */ if (atapi_debug) sense_request(); if (++errors == max_errors) { w_command = CMD_IDLE; if (atapi_debug) printf("giving up (%d)\n", errors); return(EIO); } if (atapi_debug) printf("retry (%d)\n", errors); } } #if 0 if(dmabytes) printf("dmabytes %d ", dmabytes); if(piobytes) printf("piobytes %d", piobytes); if(dmabytes || piobytes) printf("\n"); #endif w_command = CMD_IDLE; return(total); } /*===========================================================================* * atapi_sendpacket * *===========================================================================*/ static int atapi_sendpacket(packet, cnt, do_dma) u8_t *packet; unsigned cnt; int do_dma; { /* Send an Atapi Packet Command */ struct wini *wn = w_wn; pvb_pair_t outbyte[6]; /* vector for sys_voutb() */ int s; if (wn->state & IGNORING) return ERR; /* Select Master/Slave drive */ if ((s=sys_outb(wn->base_cmd + REG_DRIVE, wn->ldhpref)) != OK) panic("Couldn't select master/ slave drive: %d", s); if (!w_waitfor(STATUS_BSY | STATUS_DRQ, 0)) { printf("%s: atapi_sendpacket: drive not ready\n", w_name()); return(ERR); } /* Schedule a wakeup call, some controllers are flaky. This is done with * a synchronous alarm. If a timeout occurs a SYN_ALARM message is sent * from HARDWARE, so that w_intr_wait() can call w_timeout() in case the * controller was not able to execute the command. Leftover timeouts are * simply ignored by the main loop. */ sys_setalarm(wakeup_ticks, 0); #if _WORD_SIZE > 2 if (cnt > 0xFFFE) cnt = 0xFFFE; /* Max data per interrupt. */ #endif w_command = ATAPI_PACKETCMD; pv_set(outbyte[0], wn->base_cmd + REG_FEAT, do_dma ? FEAT_DMA : 0); pv_set(outbyte[1], wn->base_cmd + REG_IRR, 0); pv_set(outbyte[2], wn->base_cmd + REG_SAMTAG, 0); pv_set(outbyte[3], wn->base_cmd + REG_CNT_LO, (cnt >> 0) & 0xFF); pv_set(outbyte[4], wn->base_cmd + REG_CNT_HI, (cnt >> 8) & 0xFF); pv_set(outbyte[5], wn->base_cmd + REG_COMMAND, w_command); if (atapi_debug) printf("cmd: %x ", w_command); if ((s=sys_voutb(outbyte,6)) != OK) panic("Couldn't write registers with sys_voutb(): %d", s); if (!w_waitfor(STATUS_BSY | STATUS_DRQ, STATUS_DRQ)) { printf("%s: timeout (BSY|DRQ -> DRQ)\n", w_name()); return(ERR); } wn->w_status |= STATUS_ADMBSY; /* Command not at all done yet. */ /* Send the command packet to the device. */ if ((s=sys_outsw(wn->base_cmd + REG_DATA, SELF, packet, ATAPI_PACKETSIZE)) != OK) panic("sys_outsw() failed: %d", s); return(OK); } #endif /* ENABLE_ATAPI */ /*===========================================================================* * w_ioctl * *===========================================================================*/ static int w_ioctl(dev_t minor, unsigned int request, endpoint_t endpt, cp_grant_id_t grant) { int r, timeout, prev, count; struct command cmd; switch (request) { case DIOCTIMEOUT: r= sys_safecopyfrom(endpt, grant, 0, (vir_bytes)&timeout, sizeof(timeout)); if(r != OK) return r; if (timeout == 0) { /* Restore defaults. */ timeout_usecs = DEF_TIMEOUT_USECS; max_errors = MAX_ERRORS; wakeup_ticks = WAKEUP_TICKS; w_silent = 0; } else if (timeout < 0) { return EINVAL; } else { prev = wakeup_ticks; if (!w_standard_timeouts) { /* Set (lower) timeout, lower error * tolerance and set silent mode. */ wakeup_ticks = timeout; max_errors = 3; w_silent = 1; timeout = timeout * 1000000 / sys_hz(); if (timeout_usecs > timeout) timeout_usecs = timeout; } r= sys_safecopyto(endpt, grant, 0, (vir_bytes)&prev, sizeof(prev)); if(r != OK) return r; } return OK; case DIOCOPENCT: if (w_prepare(minor) == NULL) return ENXIO; count = w_wn->open_ct; r= sys_safecopyto(endpt, grant, 0, (vir_bytes)&count, sizeof(count)); if(r != OK) return r; return OK; case DIOCFLUSH: if (w_prepare(minor) == NULL) return ENXIO; if (w_wn->state & ATAPI) return EINVAL; if (!(w_wn->state & INITIALIZED) && w_specify() != OK) return EIO; cmd.command = CMD_FLUSH_CACHE; if (com_simple(&cmd) != OK || !w_waitfor(STATUS_BSY, 0)) return EIO; return (w_wn->w_status & (STATUS_ERR|STATUS_WF)) ? EIO : OK; } return EINVAL; } /*===========================================================================* * w_hw_int * *===========================================================================*/ static void w_hw_int(unsigned int irqs) { /* Leftover interrupt(s) received; ack it/them. */ ack_irqs(irqs); } /*===========================================================================* * ack_irqs * *===========================================================================*/ static void ack_irqs(unsigned int irqs) { unsigned int drive; u32_t w_status; for (drive = 0; drive < MAX_DRIVES; drive++) { if (!(wini[drive].state & IGNORING) && wini[drive].irq_need_ack && ((1L << wini[drive].irq) & irqs)) { if (sys_inb((wini[drive].base_cmd + REG_STATUS), &w_status) != OK) { panic("couldn't ack irq on drive: %d", drive); } wini[drive].w_status= w_status; sys_inb(wini[drive].base_dma + DMA_STATUS, &w_status); if(w_status & DMA_ST_INT) { sys_outb(wini[drive].base_dma + DMA_STATUS, DMA_ST_INT); wini[drive].dma_intseen = 1; } if (sys_irqenable(&wini[drive].irq_hook_id) != OK) printf("couldn't re-enable drive %d\n", drive); } } } #define STSTR(a) if (status & STATUS_ ## a) strlcat(str, #a " ", sizeof(str)); #define ERRSTR(a) if (e & ERROR_ ## a) strlcat(str, #a " ", sizeof(str)); static char *strstatus(int status) { static char str[200]; str[0] = '\0'; STSTR(BSY); STSTR(DRDY); STSTR(DMADF); STSTR(SRVCDSC); STSTR(DRQ); STSTR(CORR); STSTR(CHECK); return str; } static char *strerr(int e) { static char str[200]; str[0] = '\0'; ERRSTR(BB); ERRSTR(ECC); ERRSTR(ID); ERRSTR(AC); ERRSTR(TK); ERRSTR(DM); return str; } #if ENABLE_ATAPI /*===========================================================================* * atapi_intr_wait * *===========================================================================*/ static int atapi_intr_wait(int UNUSED(do_dma), size_t UNUSED(max)) { /* Wait for an interrupt and study the results. Returns a number of bytes * that need to be transferred, or an error code. */ struct wini *wn = w_wn; pvb_pair_t inbyte[4]; /* vector for sys_vinb() */ int s; /* status for sys_vinb() */ int e; int len; int irr; int r; int phase; w_intr_wait(); /* Request series of device I/O. */ inbyte[0].port = wn->base_cmd + REG_ERROR; inbyte[1].port = wn->base_cmd + REG_CNT_LO; inbyte[2].port = wn->base_cmd + REG_CNT_HI; inbyte[3].port = wn->base_cmd + REG_IRR; if ((s=sys_vinb(inbyte, 4)) != OK) panic("ATAPI failed sys_vinb(): %d", s); e = inbyte[0].value; len = inbyte[1].value; len |= inbyte[2].value << 8; irr = inbyte[3].value; if (wn->w_status & (STATUS_BSY | STATUS_CHECK)) { if (atapi_debug) { printf("atapi fail: S=%x=%s E=%02x=%s L=%04x I=%02x\n", wn->w_status, strstatus(wn->w_status), e, strerr(e), len, irr); } return ERR; } phase = (wn->w_status & STATUS_DRQ) | (irr & (IRR_COD | IRR_IO)); switch (phase) { case IRR_COD | IRR_IO: if (ATAPI_DEBUG) printf("ACD: Phase Command Complete\n"); r = OK; break; case 0: if (ATAPI_DEBUG) printf("ACD: Phase Command Aborted\n"); r = ERR; break; case STATUS_DRQ | IRR_COD: if (ATAPI_DEBUG) printf("ACD: Phase Command Out\n"); r = ERR; break; case STATUS_DRQ: if (ATAPI_DEBUG) printf("ACD: Phase Data Out %d\n", len); r = len; break; case STATUS_DRQ | IRR_IO: if (ATAPI_DEBUG) printf("ACD: Phase Data In %d\n", len); r = len; break; default: if (ATAPI_DEBUG) printf("ACD: Phase Unknown\n"); r = ERR; break; } wn->w_status |= STATUS_ADMBSY; /* Assume not done yet. */ return(r); } #endif /* ENABLE_ATAPI */ #undef sys_voutb #undef sys_vinb static int at_voutb(pvb_pair_t *pvb, int n) { int s, i; if ((s=sys_voutb(pvb,n)) == OK) return OK; printf("at_wini%ld: sys_voutb failed: %d pvb (%d):\n", w_instance, s, n); for(i = 0; i < n; i++) printf("%2d: %4x -> %4x\n", i, pvb[i].value, pvb[i].port); panic("sys_voutb failed"); } static int at_vinb(pvb_pair_t *pvb, int n) { int s, i; if ((s=sys_vinb(pvb,n)) == OK) return OK; printf("at_wini%ld: sys_vinb failed: %d pvb (%d):\n", w_instance, s, n); for(i = 0; i < n; i++) printf("%2d: %4x\n", i, pvb[i].port); panic("sys_vinb failed"); } static int at_out(int line, u32_t port, u32_t value, char *typename, int type) { int s; s = sys_out(port, value, type); if(s == OK) return OK; printf("at_wini%ld: line %d: %s failed: %d; %x -> %x\n", w_instance, line, typename, s, value, port); panic("sys_out failed"); } static int at_in(int line, u32_t port, u32_t *value, char *typename, int type) { int s; s = sys_in(port, value, type); if(s == OK) return OK; printf("at_wini%ld: line %d: %s failed: %d; port %x\n", w_instance, line, typename, s, port); panic("sys_in failed"); }