This program uses the i2c /dev interface to read the
contents of EEPROMs and display it to the user in
HEX and ASCII. It also has a mode that can display
data in label:value pairs. That mode is used for
board detection in the rc script to start the right
i2c drivers for the board.
Change-Id: I0bf5b13ffab5a89533c762d6881a145cf7f14914
Import the NetBSD rdate command and remove the Minix rdate command.
The default behaviour for both is the same. The NetBSD version adds
options to just display the time, adjust the time using adjtime(),
and set the time without printing the time.
Porting Notes:
- Compiles cleanly out of the box without any warnings
- Path changes from /usr/bin/rdate to /usr/sbin/rdate
- checked pkgsrc for any usages of rdate (none found)
- checked src for any usages of rdate (none found)
Testing:
- all command line options work (tested with time.nist.gov server)
- Native and cross build OK
Change-Id: I613449763891a896527f337999c006a970c3924c
This patch introduces a framebuffer to Minix. It's written for the ARM
port of Minix, but has an architectural split that separates the
hardware dependent part from the non-hardware dependent part. Futhermore,
this driver was developed using a screen that has a native resolution of
1024x600 pixels and having lack of support for obtaining EDID from the
screen. Consequently, it uses a hardcoded resolution of 1024x600.
The driver uses an interface based on the Linux ioctl API, but supports
only a very limited subset.
* Removing commands/tar
* Updated external/bsd/libarchive
* Adding external/bsd/libarchive/bin/tar compiled bsdtar instead
of just tar
* (tar is taken care of through the pax utility)
Change-Id: Ie773b4502fbf4e3880f28f01bb528b063a60c668
This patch adds the sprofdiff tool, which compares two sets of profiling
output files. It sorts processes and symbols by difference in average
number of samples, placing those that took more time on the left first
and those that took more time on the right last. If multiple runs are
combined, a standard deviation is computed and this is used to compute
the significance level, which gives an indication of which differences
are likely to be due to chance.
This tool is run not on the raw profiling files, but on the output of
sprofalyze -d (a new option). Though having to use two tools and an
intermediate file seems a bit awkward, the advantage is that the
original source tree is not needed to resolve the symbols. For
comparisons, this is very useful. Also, the intermediate file is in a
text format that can easily be processed by scripts, which may be useful
for other purposes as well.
This commit removes all traces of Minix segments (the text/data/stack
memory map abstraction in the kernel) and significance of Intel segments
(hardware segments like CS, DS that add offsets to all addressing before
page table translation). This ultimately simplifies the memory layout
and addressing and makes the same layout possible on non-Intel
architectures.
There are only two types of addresses in the world now: virtual
and physical; even the kernel and processes have the same virtual
address space. Kernel and user processes can be distinguished at a
glance as processes won't use 0xF0000000 and above.
No static pre-allocated memory sizes exist any more.
Changes to booting:
. The pre_init.c leaves the kernel and modules exactly as
they were left by the bootloader in physical memory
. The kernel starts running using physical addressing,
loaded at a fixed location given in its linker script by the
bootloader. All code and data in this phase are linked to
this fixed low location.
. It makes a bootstrap pagetable to map itself to a
fixed high location (also in linker script) and jumps to
the high address. All code and data then use this high addressing.
. All code/data symbols linked at the low addresses is prefixed by
an objcopy step with __k_unpaged_*, so that that code cannot
reference highly-linked symbols (which aren't valid yet) or vice
versa (symbols that aren't valid any more).
. The two addressing modes are separated in the linker script by
collecting the unpaged_*.o objects and linking them with low
addresses, and linking the rest high. Some objects are linked
twice, once low and once high.
. The bootstrap phase passes a lot of information (e.g. free memory
list, physical location of the modules, etc.) using the kinfo
struct.
. After this bootstrap the low-linked part is freed.
. The kernel maps in VM into the bootstrap page table so that VM can
begin executing. Its first job is to make page tables for all other
boot processes. So VM runs before RS, and RS gets a fully dynamic,
VM-managed address space. VM gets its privilege info from RS as usual
but that happens after RS starts running.
. Both the kernel loading VM and VM organizing boot processes happen
using the libexec logic. This removes the last reason for VM to
still know much about exec() and vm/exec.c is gone.
Further Implementation:
. All segments are based at 0 and have a 4 GB limit.
. The kernel is mapped in at the top of the virtual address
space so as not to constrain the user processes.
. Processes do not use segments from the LDT at all; there are
no segments in the LDT any more, so no LLDT is needed.
. The Minix segments T/D/S are gone and so none of the
user-space or in-kernel copy functions use them. The copy
functions use a process endpoint of NONE to realize it's
a physical address, virtual otherwise.
. The umap call only makes sense to translate a virtual address
to a physical address now.
. Segments-related calls like newmap and alloc_segments are gone.
. All segments-related translation in VM is gone (vir2map etc).
. Initialization in VM is simpler as no moving around is necessary.
. VM and all other boot processes can be linked wherever they wish
and will be mapped in at the right location by the kernel and VM
respectively.
Other changes:
. The multiboot code is less special: it does not use mb_print
for its diagnostics any more but uses printf() as normal, saving
the output into the diagnostics buffer, only printing to the
screen using the direct print functions if a panic() occurs.
. The multiboot code uses the flexible 'free memory map list'
style to receive the list of free memory if available.
. The kernel determines the memory layout of the processes to
a degree: it tells VM where the kernel starts and ends and
where the kernel wants the top of the process to be. VM then
uses this entire range, i.e. the stack is right at the top,
and mmap()ped bits of memory are placed below that downwards,
and the break grows upwards.
Other Consequences:
. Every process gets its own page table as address spaces
can't be separated any more by segments.
. As all segments are 0-based, there is no distinction between
virtual and linear addresses, nor between userspace and
kernel addresses.
. Less work is done when context switching, leading to a net
performance increase. (8% faster on my machine for 'make servers'.)
. The layout and configuration of the GDT makes sysenter and syscall
possible.
. make ramdisk buildable without ../etc having pwd.db
. add cat to release bootstrap cmds
. support running dynamically linked executables for
release bootstrap cmds
. import netbsd chroot to help
See UPDATING about upgrading clang for dynamic linking.
. allow executables on ramdisk to be dynamically linked; this means
putting a few required shared libraries and ld.elf_so on the ramdisk.
. this makes the ramdisk (usage) smaller when they are dynamic, but
bigger when they're not.
. also we can safely ditch newroot and call mount directly as that is
all newroot does.
. create proto.common to share a bunch of entries between
small/nonsmall cases
