Commit graph

54 commits

Author SHA1 Message Date
Lionel Sambuc
7031438f58 Message type and related cleanup
- Intorduce and use a message type for VFS_GETDENTS, VFS_READ,
   VFS_WRITE.

 - Some cleanup to related functions where vir_bytes are replaced (and
   casted to/from, in parameter definition and local variables as well.

   This allow to see more clearly which function receives unsafe
   (pointer) values, or at least values which are not supposed to be
   valid in the address space of VFS. The current patch does so only
   for the minimal amount of functions which are concerned with the
   introduction of the new message type.

Change-Id: I0cdca97409c4016d02fae067b48bf55d37572c5c
2014-07-28 17:05:34 +02:00
Lionel Sambuc
37598dccf1 Aligning dev_t to 64bits.
Change-Id: I630f72f8530dd4aaf05c35ca23683ae12c9f8328
2014-03-02 12:28:32 +01:00
David van Moolenbroek
24ec0d73b5 Clean up interface to PM and VFS
- introduce new call numbers, names, and field aliases;
- initialize request messages to zero for all ABI calls;
- format callnr.h in the same way as com.h;
- redo call tables in both servers;
- remove param.h namespace pollution in the servers;
- make brk(2) go to VM directly, rather than through PM;
- remove obsolete BRK, UTIME, and WAIT calls;
- clean up path copying routine in VFS;
- move remaining system calls from libminlib to libc;
- correct some errno-related mistakes in libc routines.

Change-Id: I2d8ec5d061cd7e0b30c51ffd77aa72ebf84e2565
2014-03-01 09:05:01 +01:00
David van Moolenbroek
2c8310fce6 VFS: store m_out as part of worker thread state
There is no need to pass pointers around when there is a structure
available that already stores other similar state, such as m_in.

Change-Id: I3164c5c55c71f443688103d1f0756c086eb05974
2014-03-01 09:05:00 +01:00
Ben Gras
6c8f7fc3ba netbsd dirent.h, import sys/sys *.h, mfs cleanup
. add all sys/sys headers not already present to help compiling
	. take netbsd dirent.h and struct dirent; main result is
	  introducing d_type and d_namlen that have to be set by getdents()
	  in all FS code implementing it
	. d_off is gone
	. alignment of the struct has become 8 bytes instead of 4
	. remove _MAX_BLOCK_SIZE, _MIN_BLOCK_SIZE, _STATIC_BLOCK_SIZE
	. libminlib: cleanup unused yet duplicate code
	. mfs: throw out the long-broken v1, v2 support
	. new test for dirent contents filled by getdents()

Change-Id: I1459755c7ba5e5d1c9396d3a587ce6e63ddc283e
2014-03-01 09:04:59 +01:00
David van Moolenbroek
665198b4c2 Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.

Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
2014-03-01 09:04:52 +01:00
David van Moolenbroek
87337273e4 Remove support for reopening character devices
Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.

- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
  invalidation; instead, make get_filp* fail all calls on invalidated
  FDs except when obtained with the locktype VNODE_OPCL which is used
  by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
  the situation that a FD is in use if its slot points to a filp; use
  FILP_CLOSED as single means of marking a filp as invalidated.

Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
2014-03-01 09:04:52 +01:00
David van Moolenbroek
5c53b417cd VFS: update filp_pos on chardev I/O (workaround)
Previously, reading from or writing to a character device would not
update the file position on the corresponding filp object.  Performing
this update correctly is not trivial: during and after the I/O
operation, the filp object must not be locked.  Ideally, read/write
requests on a filp that is already involved in a read/write operation,
should be queued.  For now, we optimistically update the file position
at the start of the I/O; this works under the assumptions listed in
the corresponding comment.

Change-Id: I172a61781850423709924390ae3df1f2d1f94707
2014-02-18 11:25:03 +01:00
David van Moolenbroek
723e51327f VFS: worker thread model overhaul
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:

- all active worker threads are now always associated with a process,
  and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
  associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
  worker_start() function; the number of worker threads has
  consequently been increased by one;
- saving and restoring of global but per-thread variables is now
  centralized in worker_suspend() and worker_resume(); err_code is now
  saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
  message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
  process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
  associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
  than just an optimization and only applied to processes operating on
  a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
  the main thread or a worker thread, when resuming execution of a
  thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
  force a thread to run.

Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
2014-02-18 11:25:03 +01:00
David van Moolenbroek
87aefd7eb2 VFS: remove support for sync char driver protocol
Change-Id: I57cc870a053b813b3a3fc45da46606ea84fe4cb1
2014-02-18 11:25:03 +01:00
David van Moolenbroek
cc810ee4d9 VFS/FS: replace protocol version with flag field
The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:

- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.

Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
2014-02-18 11:25:02 +01:00
Thomas Veerman
32e916ad53 VFS: use 64-bit file offsets in all requests
Change-Id: I735c4068135474aff2c397f4bc9fb147a618b453
2014-02-18 11:25:01 +01:00
Thomas Veerman
c1a31d53d9 stat.h: remove some big_ types
Change-Id: I84017db3d54edfb823cc52e02d0b07fccb003988
2014-02-18 11:25:01 +01:00
Thomas Veerman
c66fd312d4 VFS-FS protocol: add versioning
Change-Id: Ice6fbfd4b535b7435653fa08b27a3378d1cfdbf8
2014-02-18 11:25:00 +01:00
Gerard
f1b0deacf3 Replaced add64, add64u and add64ul with operators.
Change-Id: Ia537f83e15cb686f1b81b34d73596f4298b0a924
2013-11-13 13:11:33 +00:00
Ben Gras
456359aa72 retire 64-bit conversion functions
Change-Id: Ib6b81403f877c363a286c654e0524fa1cb781b80
2013-06-24 16:50:57 +02:00
Ben Gras
33a7ac7557 vfs: mmap support
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
	  This is a good special case to have as vfs is a slightly
	  different client from regular user processes. It doesn't do it
	  for itself, and has the dev & inode info already so the callback
	  to VFS for the lookup isn't necessary. So it has different info
	  to have to give to VM.
	. libc: also add minix_mmap64() that accepts a 64-bit offset, even
	  though our off_t is still 32 bit now.
	. On exec() time, try to mmap() in the executable if available.
	  (It is not yet available in this commit.)
	. To support mmap(), add do_vm_call that allows VM to lookup
	  (to ino+dev), do i/o from and close FD's on behalf of other
	  processes.

Change-Id: I831551e45a6781c74313c450eb9c967a68505932
2013-05-31 15:42:00 +00:00
Ben Gras
cef94e096e vfs: make m_out non-global
m_out is shared between threads as the reply message, and it can happen
results get overwritten by another thread before the reply is sent. This
change

	. makes m_out local to the message handling function,
	  declared on the stack of the caller
	. forces callers of reply() to give it a message, or
	  declare the reply message has no significant fields except
	  for the return code by calling replycode()

Change-Id: Id06300083a63c72c00f34f86a5c7d96e4bbdf9f6
2013-04-12 23:40:38 +00:00
Ben Gras
a9f55a2e46 VFS, FSes: add REQ_PEEK request type
REQ_PEEK behaves just like REQ_READ except that it does not copy
data anywhere, just obtains the blocks from the FS into the cache.

To be used by the future mmap implementation.

Change-Id: I1b56de304f0a7152b69a72c8962d04258adb44f9
2013-03-07 10:57:38 +00:00
Thomas Veerman
fa78dc389f socket: implement SOCK_CLOEXEC and SOCK_NONBLOCK
Change-Id: I3fa36fa999c82a192d402cb4d913bd397e106e53
2013-02-28 10:08:53 +00:00
Thomas Veerman
b180f32ab3 VFS/PFS: remove remnants of file position in pipes 2013-01-23 11:14:34 +00:00
Thomas Veerman
3de8d1cf6e VFS/PFS: remove notion of position in pipes
Because pipes have no file position. VFS maintained (file) offsets into a
buffer internal to PFS and stored them in vnodes for simplicity, mixing
the responsibilities of filp and vnode objects.

With this patch PFS ignores the position field in REQ_READ and REQ_WRITE
requests making VFS' job a lot simpler.
2013-01-11 09:18:35 +00:00
Thomas Veerman
7c8b3ddfed VFS: fix locking bugs
.sync and fsync used unnecessarily restrictive locking type
.fsync violated locking order by obtaining a vmnt lock after a filp lock
.fsync contained a TOCTOU bug
.new_node violated locking rules (didn't upgrade lock upon file creation)
.do_pipe used unnecessarily restrictive locking type
.always lock pipes exclusively; even a read operation might require to do
 a write on a vnode object (update pipe size)
.when opening a file with O_TRUNC, upgrade vnode lock when truncating
.utime used unnecessarily restrictive locking type
.path parsing:
  .always acquire VMNT_WRITE or VMNT_EXCL on vmnt and downgrade to
   VMNT_READ if that was what was actually requested. This prevents the
   following deadlock scenario:
   thread A:
     lock_vmnt(vmp, TLL_READSER);
     lock_vnode(vp, TLL_READSER);
     upgrade_vmnt_lock(vmp, TLL_WRITE);

   thread B:
     lock_vmnt(vmp, TLL_READ);
     lock_vnode(vp, TLL_READSER);

   thread A will be stuck in upgrade_vmnt_lock and thread B is stuck in
   lock_vnode. This happens when, for example, thread A tries create a
   new node (open.c:new_node) and thread B tries to do eat_path to
   change dir (stadir.c:do_chdir). When the path is being resolved, a
   vnode is always locked with VNODE_OPCL (TLL_READSER) and then
   downgraded to VNODE_READ if read-only is actually requested. Thread
   A locks the vmnt with VMNT_WRITE (TLL_READSER) which still allows
   VMNT_READ locks. Thread B can't acquire a lock on the vnode because
   thread A has it; Thread A can't upgrade its vmnt lock to VMNT_WRITE
   (TLL_WRITE) because thread B has a VMNT_READ lock on it.

   By serializing vmnt locks during path parsing, thread B can only
   acquire a lock on vmp when thread A has completely finished its
   operation.
2013-01-11 09:18:35 +00:00
Arne Welzel
e35c4f78d2 VFS: fix check_bsf() locking
The check_bsf() macro uses assert(mutex_trylock(&bsf_lock)) and
assumes bsf_lock is locked afterwards. This breaks when compiling
with NOASSERTS="yes". Also: macro to function transition.
2012-09-28 14:57:34 +02:00
Thomas Veerman
992799b91f VFS: make all IPC asynchronous
By decoupling synchronous drivers from VFS, we are a big step closer to
supporting driver crashes under all circumstances. That is, VFS can't
become stuck on IPC with a synchronous driver (e.g., INET) and can
recover from crashing block drivers during open/close/ioctl or during
communication with an FS.

In order to maintain serialized communication with a synchronous driver,
the communication is wrapped by a mutex on a per driver basis (not major
numbers as there can be multiple majors with identical endpoints). Majors
that share a driver endpoint point to a single mutex object.

In order to support crashes from block drivers, the file reopen tactic
had to be changed; first reopen files associated with the crashed
driver, then send the new driver endpoint to FSes. This solves a
deadlock between the FS and the block driver;
  - VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it
    after retrying the current request to the newly started driver.
  - The block driver would refuse the retried request until all files
    had been reopened.
  - VFS would reopen files only after getting a reply from the initial
    REQ_NEW_DRIVER.

When a character special driver crashes, all associated files have to
be marked invalid and closed (or reopened if flagged as such). However,
they can only be closed if a thread holds exclusive access to it. To
obtain exclusive access, the worker thread (which handles the new driver
endpoint event from DS) schedules a new job to garbage collect invalid
files. This way, we can signal the worker thread that was talking to the
crashed driver and will release exclusive access to a file associated
with the crashed driver and prevent the garbage collecting worker thread
from dead locking on that file.

Also, when a character special driver crashes, RS will unmap the driver
and remap it upon restart. During unmapping, associated files are marked
invalid instead of waiting for an endpoint up event from DS, as that
event might come later than new read/write/select requests and thus
cause confusion in the freshly started driver.

When locking a filp, the usage counters are no longer checked. The usage
counter can legally go down to zero during filp invalidation while there
are locks pending.

DS events are handled by a separate worker thread instead of the main
thread as reopening files could lead to another crash and a stuck thread.
An additional worker thread is then necessary to unlock it.

Finally, with everything asynchronous a race condition in do_select
surfaced. A select entry was only marked in use after succesfully sending
initial select requests to drivers and having to wait. When multiple
select() calls were handled there was opportunity that these entries
were overwritten. This had as effect that some select results were
ignored (and select() remained blocking instead if returning) or do_select
tried to access filps that were not present (because thrown away by
secondary select()). This bug manifested itself with sendrecs, but was
very hard to reproduce. However, it became awfully easy to trigger with
asynsends only.
2012-09-17 11:01:45 +00:00
Thomas Veerman
db8198d99d VFS: use S_IS* macros 2012-04-27 08:49:38 +00:00
Thomas Veerman
96bbc5da3e VFS: I_PIPE is redundant
Also, use S_IS* macros instead of manual comparison.
2012-04-27 08:49:38 +00:00
Thomas Veerman
8f55767619 VFS: make m_in job local
By making m_in job local (i.e., each job has its own copy of m_in instead
of refering to the global m_in) we don't have to store and restore m_in
on every thread yield. This reduces overhead. Moreover, remove the
assumption that m_in is preserved. Do_XXX functions have to copy the
system call parameters as soon as possible and only pass those copies to
other functions.

Furthermore, this patch cleans up some code and uses better types in a lot
of places.
2012-04-13 12:50:38 +00:00
Ben Gras
7336a67dfe retire PUBLIC, PRIVATE and FORWARD 2012-03-25 21:58:14 +02:00
Thomas Veerman
80c4685324 VFS: replace VFS with AVFS 2012-02-13 16:53:21 +00:00
Thomas Veerman
13ef7f1f38 Prepare VFS to support back calls from PFS. For security reasons and to support
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
2010-08-30 13:44:07 +00:00
Tomas Hruby
6e25ad8b0a Use of all NIL_* defines converted to NULL 2010-05-10 13:26:00 +00:00
Kees van Reeuwijk
fc7dced1fa Fix printfs with too few or too many parms, remove unused vars, fix incorrect flag tests, other code cleanup. 2010-04-01 13:25:05 +00:00
David van Moolenbroek
27d53256e4 VFS fixes:
- do not use uninitialized req_breadwrite results upon failure
- improve ".." ELEAVEMOUNT correctness check
2010-03-08 22:05:27 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Kees van Reeuwijk
1597e701a0 Remove useless variables and the computations on them. 2010-02-19 10:00:32 +00:00
Thomas Veerman
9a7cd8e254 Pipe vnodes are always mapped. 2010-01-27 09:30:39 +00:00
David van Moolenbroek
ac9ab099c8 General cleanup:
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
2010-01-05 19:39:27 +00:00
Thomas Veerman
958b25be50 - Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
  the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
  functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
  the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
  - Several path lookup bugs in MFS.
  - A link can be too big for the path buffer.
  - A mountpoint can become inaccessible when the creation of a new inode
    fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
  suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
  unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
  named pipes. However, named pipes still reside on the (M)FS, as they are part
  of the file system on disk. To make this work VFS now has a concept of
  'mapped' inodes, which causes read, write, truncate and stat requests to be
  redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 20:27:14 +00:00
David van Moolenbroek
50b77e3529 VFS consistency: use I_PIPE/NO_PIPE when checking v_pipe 2009-05-19 14:34:44 +00:00
Ben Gras
746e138036 turn off scary looking debug messages. 2009-05-07 09:57:43 +00:00
Ben Gras
3bb80322d9 suppress more mostly-harmless messages. 2009-03-26 16:11:27 +00:00
Philip Homburg
6ef71b8198 Pass suspend_reopen flag to dev_io. 2008-02-22 14:26:41 +00:00
Ben Gras
38604e4e3a Don't truncate read requests based on v_size; v_size can be stale in the
case of directories extended by subfilesystem. Rely on subfilesystem to
do read size truncating and return actual i/o size. This fixes bug 81 in
gforge, and unbreaks test 23.
2007-09-11 15:52:22 +00:00
Philip Homburg
4b1cd8c0ec Return EIO if a filedescriptor cannot be re-opened after a driver restart.
Select now returns such a filedescriptor as ready (instead of EBADF). 
Reply before dev_up in FSSIGNON to avoid the problem that a DEV_OPEN
request is received by a driver that expects a reply from the FSSIGNON.
2007-08-15 12:53:52 +00:00
Philip Homburg
a116b3aa55 To return the right error, check first is an object is a directory (for
mkdir, rmdir/unlink, mknod), simply pipe code by using v_pipe_rd_pos and
v_pipe_wr_pos directly. Some cleanup work in open.c
2007-08-08 14:01:36 +00:00
Philip Homburg
d232b2ef42 Removed invalid consistency check. 2007-08-07 14:27:19 +00:00
Philip Homburg
f46319037b New VFS interface 2007-08-07 12:52:47 +00:00
Ben Gras
8ea438ae93 Retired DEV_{READ,WRITE,GATHER,SCATTER,IOCTL} (safe versions *_S are to
be used and drivers should never receieve these 'unsafe' variants
any more).
2007-02-07 16:22:19 +00:00
Ben Gras
41e9fedf87 Mostly bugfixes of bugs triggered by the test set.
bugfixes:
 SYSTEM:
 . removed
        rc->p_priv->s_flags = 0;
   for the priv struct shared by all user processes in get_priv(). this
   should only be done once. doing a SYS_PRIV_USER in sys_privctl()
   caused the flags of all user processes to be reset, so they were no
   longer PREEMPTIBLE. this happened when RS executed a policy script.
   (this broke test1 in the test set)

 VFS/MFS:
 . chown can change the mode of a file, and chmod arguments are only
   part of the full file mode so the full filemode is slightly magic.
   changed these calls so that the final modes are returned to VFS, so
   that the vnode can be kept up-to-date.
   (this broke test11 in the test set)

 MFS:
 . lookup() checked for sizeof(string) instead of sizeof(user_path),
   truncating long path names
   (caught by test 23)
 . truncate functions neglected to update ctime
   (this broke test16)

 VFS:
 . corner case of an empty filename lookup caused fields of a request
   not to be filled in in the lookup functions, not making it clear
   that the lookup had failed, causing messages to garbage processes,
   causing strange failures.
   (caught by test 30)
 . trust v_size in vnode when doing reads or writes on non-special
   files, truncating i/o where necessary; this is necessary for pipes,
   as MFS can't tell when a pipe has been truncated without it being
   told explicitly each time.
   when the last reader/writer on a pipe closes, tell FS about
   the new size using truncate_vn().
   (this broke test 25, among others)
 . permission check for chdir() had disappeared; added a
   forbidden() call
   (caught by test 23)

new code, shouldn't change anything:
 . introduced RTS_SET, RTS_UNSET, and RTS_ISSET macro's, and their
   LOCK variants. These macros set and clear the p_rts_flags field,
   causing a lot of duplicated logic like

       old_flags = rp->p_rts_flags;            /* save value of the flags */
       rp->p_rts_flags &= ~NO_PRIV;
       if (old_flags != 0 && rp->p_rts_flags == 0) lock_enqueue(rp);

   to change into the simpler

       RTS_LOCK_UNSET(rp, NO_PRIV);

   so the macros take care of calling dequeue() and enqueue() (or lock_*()),
   as the case may be). This makes the code a bit more readable and a
   bit less fragile.
 . removed return code from do_clocktick in CLOCK as it currently
   never replies
 . removed some debug code from VFS
 . fixed grant debug message in device.c
 
preemptive checks, tests, changes:
 . added return code checks of receive() to SYSTEM and CLOCK
 . O_TRUNC should never arrive at MFS (added sanity check and removed
   O_TRUNC code)
 . user_path declared with PATH_MAX+1 to let it be null-terminated
 . checks in MFS to see if strings passed by VFS are null-terminated
 
 IS:
 . static irq name table thrown out
2007-02-01 17:50:02 +00:00