Commit graph

65 commits

Author SHA1 Message Date
David van Moolenbroek
4f6b382c41 Retire ptrace(T_DUMPCORE), dumpcore(1), gcore(1)
The T_DUMPCORE implementation was not only broken - it would currently
produce a coredump of the tracer process rather than the traced
process - but also deeply flawed, and fixing it would require serious
alteration of PM's internal state machine. It should be possible to
implement the same functionality in userland, and that is now the
suggested way forward. For now, also remove the (identical) utilities
using T_DUMPCORE: dumpcore(1) and gcore(1).

Change-Id: I1d51be19c739362b8a5833de949b76382a1edbcc
2014-02-18 11:25:03 +01:00
Ben Gras
b1da7fafd0 vm: fix a null dereference on out-of-memory
. also make other out-of-memory conditions less fatal
	. add a test case for a user program using all the memory
	  it can
	. remove some diagnostic prints for situations that are normal
	  when running out of memory so running the test isn't noisy
2012-11-09 18:36:51 +01:00
David van Moolenbroek
be87fdda3d PM: resolve Coverity warnings 2012-08-09 00:16:35 +02:00
Thomas Veerman
238a9a057b PM: a few Coverity inspired fixes
.initialize variable to prevent negative array indexing
.remove dead code
2012-07-30 09:44:58 +00:00
Ben Gras
7336a67dfe retire PUBLIC, PRIVATE and FORWARD 2012-03-25 21:58:14 +02:00
Ben Gras
6a73e85ad1 retire _PROTOTYPE
. only good for obsolete K&R support
	. also remove a stray ansi.h and the proto cmd
2012-03-25 16:17:10 +02:00
Thomas Veerman
0bd011affd PM: extend srv_fork to set a specific UID
Currently, all servers and drivers run as root as they are forks of
RS. srv_fork now tells PM with which credentials to run the resulting
fork. Subsequently, PM lets VFS now as well.

This patch also fixes the following bugs:
 - RS doesn't initialize the setugid variable during exec, causing the
   servers and drivers to run setuid rendering the srv_fork extension
   useless.
 - PM erroneously tells VFS to run processes setuid. This doesn't
   actually lead to setuid processes as VFS sets {r,e}uid and {r,e}gid
   properly before checking PM's approval.
2012-01-30 15:16:19 +00:00
Thomas Veerman
a6d0ee24c3 Use correct value for _NSIG
User processes can send signals with number up to _NSIG. There are a few
signal numbers above that used by the kernel, but should explicitly not
be included in the range or range checks in PM will fail.

The system processes use a different version of sigaddset, sigdelset,
sigemptyset, sigfillset, and sigismember which does not include a range
check on signal numbers (as opposed to the normal functions used by normal
processes).

This patch unbreaks test37 when the boot image is compiled with GCC/Clang.
2012-01-16 11:42:29 +00:00
Thomas Veerman
b4fb061802 Implement issetugid syscall
Implement issetugid syscall and provide a test. This gets rid of the
scary "Unsecure. Implement me" warning during compilation.
2011-11-28 10:03:43 +00:00
Adriana Szekeres
c30f014a89 gcore command to coredump a process 2011-11-22 22:07:41 +01:00
Adriana Szekeres
eaa29370f4 ELF core files 2011-11-22 22:07:40 +01:00
Arun Thomas
8a0901c4cb Add MKTRACE 2011-09-07 17:52:48 +02:00
Thomas Veerman
34a2864e27 Fix a few compile time warnings 2010-07-02 12:41:19 +00:00
Erik van der Kouwe
23284ee7bd User-space scheduling for system processes 2010-07-01 08:32:33 +00:00
Arun Thomas
f0a158d8c1 More cleanup to remove MM and FS references 2010-06-10 14:04:46 +00:00
Arun Thomas
eec65ac664 Rename tell_fs to tell_vfs 2010-06-09 14:31:30 +00:00
Arun Thomas
4c10a31440 Remove legacy MM, FS, and FS_PROC_NR macros 2010-06-08 13:58:01 +00:00
Ben Gras
bcdaf033b5 pm - fix sched interaction
For coredumping processes, PM forgets to inform SCHED that the
process has vanished, causing future fork()s to fail.
2010-05-19 13:22:29 +00:00
Tomas Hruby
b09bcf6779 Scheduling server (by Bjorn Swift)
In this second phase, scheduling is moved from PM to its own
scheduler (see r6557 for phase one). In the next phase we hope to a)
include useful information in the "out of quantum" message and b)
create some simple scheduling policy that makes use of that
information.

When the system starts up, PM will iterate over its process table and
ask SCHED to take over scheduling unprivileged processes. This is
done by sending a SCHEDULING_START message to SCHED. This message
includes the processes endpoint, the parent's endpoint and its nice
level. The scheduler adds this process to its schedproc table, issues
a schedctl, and returns its own endpoint to PM - as the endpoint of
the effective scheduler. When a process terminates, a SCHEDULING_STOP
message is sent to the scheduler.

The reason for this effective endpoint is for future compatibility.
Some day, we may have a scheduler that, instead of scheduling the
process itself, forwards the SCHEDULING_START message on to another
scheduler.

PM has information on who schedules whom. As such, scheduling
messages from user-land are sent through PM. An example is when
processes change their priority, using nice(). In that case, a
getsetpriority message is sent to PM, which then sends a
SCHEDULING_SET_NICE to the process's effective scheduler.

When a process is forked through PM, it inherits its parent's
scheduler, but is spawned with an empty quantum. As before, a request
to fork a process flows through VM before returning to PM, which then
wakes up the child process. This flow has been modified slightly so
that PM notifies the scheduler of the new process, before waking up
the child process. If the scheduler fails to take over scheduling,
the child process is torn down and the fork fails with an erroneous
value.

Process priority is entirely decided upon using nice levels. PM
stores a copy of each process's nice level and when a child is
forked, its parent's nice level is sent in the SCHEDULING_START
message. How this level is mapped to a priority queue is up to the
scheduler. It should be noted that the nice level is used to
determine the max_priority and the parent could have been in a lower
priority when it was spawned. To prevent a CPU intensive process from
hawking the CPU by continuously forking children that get scheduled
in the max_priority, the scheduler should determine in which queue
the parent is currently scheduled, and schedule the child in that
same queue.

Other fixes: The USER_Q in kernel/proc.h was incorrectly defined as
NR_SCHED_QUEUES/2. That results in a "off by one" error when
converting priority->nice->priority for nice=0. This also had the
side effect that if someone were to set the MAX_USER_Q to something
else than 0, then USER_Q would be off.
2010-05-18 13:39:04 +00:00
Tomas Hruby
86378ff645 PM remembers what it should schedule
- while PM implements fork also for RS it needs to remember what to
  schedule and what not. PM_SCHEDULED flag serves this purpose.

- PM only schedules processes that are descendaints of init, i.e. normal
  user processes

- after a process is forked PM schedules for the first time only
  processes that have PM_SCHEDULED set. The others are handled iether
  by kernel or some other scheduler
2010-04-13 10:45:08 +00:00
Kees van Reeuwijk
fc7dced1fa Fix printfs with too few or too many parms, remove unused vars, fix incorrect flag tests, other code cleanup. 2010-04-01 13:25:05 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Erik van der Kouwe
c107dbe1d0 Man-pages on mkdep, cdprobe, loadramdisk and newroot; thanks to Antoine Leca 2010-02-02 15:10:00 +00:00
Cristiano Giuffrida
f4574783dc Rewrite of boot process
KERNEL CHANGES:
- The kernel only knows about privileges of kernel tasks and the root system
process (now RS).
- Kernel tasks and the root system process are the only processes that are made
schedulable by the kernel at startup. All the other processes in the boot image
don't get their privileges set at startup and are inhibited from running by the
RTS_NO_PRIV flag.
- Removed the assumption on the ordering of processes in the boot image table.
System processes can now appear in any order in the boot image table.
- Privilege ids can now be assigned both statically or dynamically. The kernel
assigns static privilege ids to kernel tasks and the root system process. Each
id is directly derived from the process number.
- User processes now all share the static privilege id of the root user
process (now INIT).
- sys_privctl split: we have more calls now to let RS set privileges for system
processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the
RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS /
SYS_PRIV_SET_USER are used to set privileges for a system / user process.
- boot image table flags split: PROC_FULLVM is the only flag that has been
moved out of the privilege flags and is still maintained in the boot image
table. All the other privilege flags are out of the kernel now.

RS CHANGES:
- RS is the only user-space process who gets to run right after in-kernel
startup.
- RS uses the boot image table from the kernel and three additional boot image
info table (priv table, sys table, dev table) to complete the initialization
of the system.
- RS checks that the entries in the priv table match the entries in the boot
image table to make sure that every process in the boot image gets schedulable.
- RS only uses static privilege ids to set privileges for system services in
the boot image.
- RS includes basic memory management support to allocate the boot image buffer
dynamically during initialization. The buffer shall contain the executable
image of all the system services we would like to restart after a crash.
- First step towards decoupling between resource provisioning and resource
requirements in RS: RS must know what resources it needs to restart a process
and what resources it has currently available. This is useful to tradeoff
reliability and resource consumption. When required resources are missing, the
process cannot be restarted. In that case, in the future, a system flag will
tell RS what to do. For example, if CORE_PROC is set, RS should trigger a
system-wide panic because the system can no longer function correctly without
a core system process.

PM CHANGES:
- The process tree built at initialization time is changed to have INIT as root
with pid 0, RS child of INIT and all the system services children of RS. This
is required to make RS in control of all the system services.
- PM no longer registers labels for system services in the boot image. This is
now part of RS's initialization process.
2009-12-11 00:08:19 +00:00
David van Moolenbroek
2dc9e354f7 ugly double blank line, my fault 2009-11-16 18:22:28 +00:00
David van Moolenbroek
49808dcf77 PM delay call infrastructure improvements
- allow PM to tell sys_runctl() whether to use delay call feature
- only use this feature in PM for delivering signals - not for exits
- do better error checking in PM on sys_runctl() calls
- rename SIGKREADY to SIGNDELAY
2009-10-01 10:36:09 +00:00
David van Moolenbroek
b423d7b477 Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
  being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
  AMF_NOREPLY senda() flag

DETAILS

Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
  aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
  and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
  stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
  VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
  running while modifying its process structure

Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
  the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
  protocol message
o Detached debugger signals from general signal logic and from being
  blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
  one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
  are pending
o Fixed wait test for tracer, which was returning for children that were
  not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
  debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG

Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
  debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
  of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
  a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
  structure
o Removed T_STOP ptrace request again, as it does not help implementing
  debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)

Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
  with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
  satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
  #define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
  revealed RS-PM-VFS race condition triangle until VFS is asynchronous

System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
  signal set, rather than just the POSIX subset

Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
  structure clearer
o Fixed setpriority() being able to put to sleep processes using an
  invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there

Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code

THINGS OF POSSIBLE INTEREST

o It should now be possible to run PM at any priority, even lower than
  user processes
o No assumptions are made about communication speed between PM and VFS,
  although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
  only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 09:57:22 +00:00
Ben Gras
5f497bcf22 - Introduce some macros for field names, so that endpt, pendpt,
addr and taddr don't have to be defined any more, so that <sys/mman.h>
    can be included for proper prototypes of munmap() and friends.
  - rename our GETPID to MINIX_GETPID to avoid a name conflict with
    other sources
  - PM needs its own munmap() and munmap_text() to avoid sending messages
    to VM at the startup phase. It *does* want to do that, but only
    after initialising. So they're called again with unmap_ok set to 1
    later.
  - getnuid(), getngid() implementation
2009-09-21 14:48:19 +00:00
David van Moolenbroek
ba83b7663d PM: some tiny fixes 2009-09-12 18:36:07 +00:00
David van Moolenbroek
323f0abdd6 Support for setitimer(ITIMER_VIRTUAL/ITIMER_PROF). New test (41) for setitimer. 2009-08-15 21:37:26 +00:00
David van Moolenbroek
d82e260a90 Support for setitimer(ITIMER_REAL). 2009-08-15 16:09:32 +00:00
David van Moolenbroek
1a9e07b0e5 PM: fix ptrace(T_EXIT) 'exit_proc: not idle' race condition. 2009-07-11 13:22:56 +00:00
David van Moolenbroek
14f3a0e018 PM: add clarifying comment about exiting system processes early (thanks Philip) 2009-07-11 11:19:39 +00:00
David van Moolenbroek
73c5bbf1a3 PM: add EXITING process flag as stopgap between starting coredump and setting ZOMBIE flag 2009-07-09 22:33:56 +00:00
David van Moolenbroek
693a6652ca PM cleanup: remove obsolete HAS_DMA flag 2009-07-08 20:08:46 +00:00
David van Moolenbroek
67d986f882 PM cleanup: merge exit and coredump paths 2009-07-08 17:16:53 +00:00
David van Moolenbroek
12451e6b06 Miscellaneous PM fixes:
o Don't call vm_willexit() more than once upon normal process exit
o Correct two cases of indenting of the no-discussion-possible kind
o Perform slightly stricter ptrace(2) checks:
  - process calling ptrace must be target process's parent
  - process must call wait/waitpid before using ptrace on stopped child
  - no ptrace on zombies
o Allow user processes to use ptrace(T_STOP) to stop an active child
2009-07-05 22:48:18 +00:00
Ben Gras
e0f3a5acf1 - enable ipc warnings by default
- ipc checking code in kernel didn't properly catch the
   sendrec() to self case; added special case check
 - triggered by PM using stock panic() - needs its own _exit()

reported by Joren l'Ami.
2009-04-17 13:46:37 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
1cffa69d2c Support for I/O MMU: do not re-use a memory segment until the I/O MMU has
removed it from its map.
2008-02-21 16:33:34 +00:00
Philip Homburg
9c3f85d14f Better interface for sys_times. 2007-08-16 13:16:26 +00:00
Ben Gras
1e656b349d . processes stay ZOMBIE, even after wait(), to avoid wrongly seeing them
as living processes  before they are cleaned up (fixes
  wait()/waitpid() hanging forever on previously-ZOMBIE processes)

. stop processes from running using sys_nice() with PRIO_STOP
  when a handled signal is delivered, before computing 
  stack locations for sys_sigsend(). (fixes race condition
  when runnable processes get signals, and e.g. get scheduled
  before FS sends a reply to unpause(), which can make the
  signal stack location wrong.)
2006-10-25 11:29:43 +00:00
Philip Homburg
baa3ac5853 Fix for 'cleanup: not idle: 2313' bug. 2006-07-25 14:13:09 +00:00
Philip Homburg
773844a816 New interface between PM and FS. 2006-05-11 14:57:23 +00:00
Ben Gras
9b1d4ef233 special case when exiting FS - don't core dump and don't tell FS about it
Because if FS is hanging in a signal, the exit won't work.
This way FS gets exited on e.g. SIGSEGV.
2006-03-10 17:35:55 +00:00
Jorrit Herder
021e3234d8 Jorrit's ... "progress?" 2006-03-10 16:10:05 +00:00
Ben Gras
7967177710 endpoint-aware conversion of servers.
'who', indicating caller number in pm and fs and some other servers, has
been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.).

In both PM and FS, isokendpt() convert endpoints to process slot
numbers, returning OK if it was a valid and consistent endpoint number.
okendpt() does the same but panic()s if it doesn't succeed. (In PM,
this is pm_isok..)

pm and fs keep their own records of process endpoints in their proc tables,
which are needed to make kernel calls about those processes.

message field names have changed.

fs drivers are endpoints.

fs now doesn't try to get out of driver deadlock, as the protocol isn't
supposed to let that happen any more. (A warning is printed if ELOCKED
is detected though.)

fproc[].fp_task (indicating which driver the process is suspended on)
became an int.

PM and FS now get endpoint numbers of initial boot processes from the
kernel. These happen to be the same as the old proc numbers, to let
user processes reach them with the old numbers, but FS and PM don't know
that. All new processes after INIT, even after the generation number
wraps around, get endpoint numbers with generation 1 and higher, so
the first instances of the boot processes are the only processes ever
to have endpoint numbers in the old proc number range.

More return code checks of sys_* functions have been added.

IS has become endpoint-aware. Ditched the 'text' and 'data' fields
in the kernel dump (which show locations, not sizes, so aren't terribly
useful) in favour of the endpoint number. Proc number is still visible.

Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got
the formatting changed.

PM reading segments using rw_seg() has changed - it uses other fields
in the message now instead of encoding the segment and process number and
fd in the fd field. For that it uses _read_pm() and _write_pm() which to
_taskcall()s directly in pm/misc.c.

PM now sys_exit()s itself on panic(), instead of sys_abort().

RS also talks in endpoints instead of process numbers.
2006-03-03 10:20:58 +00:00
Ben Gras
c1de7758b7 Jorrit's fixes after reviewing Al's PM chapter 2005-09-01 10:16:07 +00:00
Ben Gras
911ff6a873 Formatting fixes for the book 2005-08-29 16:47:18 +00:00