Commit graph

57 commits

Author SHA1 Message Date
Ben Gras
3cc092ff06 . new kernel call sysctl for generic unprivileged system operations;
now used for printing diagnostic messages through the kernel message
   buffer. this lets processes print diagnostics without sending messages
   to tty and log directly, simplifying the message protocol a lot and
   reducing difficulties with deadlocks and other situations in which
   diagnostics are blackholed (e.g. grants don't work). this makes
   DIAGNOSTICS(_S), ASYN_DIAGNOSTICS and DIAG_REPL obsolete, although tty
   and log still accept the codes for 'old' binaries. This also simplifies
   diagnostics in several servers and drivers - only tty needs its own
   kputc() now.
 . simplifications in vfs, and some effort to get the vnode references
   right (consistent) even during shutdown. m_mounted_on is now NULL
   for root filesystems (!) (the original and new root), a less awkward
   special case than 'm_mounted_on == m_root_node'. root now has exactly
   one reference, to root, if no files are open, just like all other
   filesystems. m_driver_e is unused.
2009-01-26 17:43:59 +00:00
Ben Gras
f4d0d635fd - hz dynamic
- new map /dev/video implementation
 - ser_putc into library
2008-12-08 16:40:29 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
00ef93d6a2 Use nonblocking sends to reply, fixed reply message for DIAGNOSTICS(_S) 2008-02-22 16:03:00 +00:00
Ben Gras
b918f61820 Boot monitor flag that enables 'sticky right-alt', permanent change
to col selected from the keymap untill right-alt is pressed again.

Sticky alt code and russian keymap contributed by Roman Ignatov
and Yaroslav Schekin.
2007-05-16 13:14:37 +00:00
Ben Gras
8ea438ae93 Retired DEV_{READ,WRITE,GATHER,SCATTER,IOCTL} (safe versions *_S are to
be used and drivers should never receieve these 'unsafe' variants
any more).
2007-02-07 16:22:19 +00:00
Philip Homburg
0ac9521c94 TTY should not panic when it is impossible to reply. A driver may crash
before receiving the reply from TTY.
2006-08-28 12:16:15 +00:00
Ben Gras
82173212ee Introduction of a 'big' ioctl, with more bits (20) reserved for encoding the
size field. The TIOCSFON ioctl size (8192) didn't get encoded properly,
as there weren't enough bits for it (12) in the regular format.

The new format has only one type field, and an extra flag (_IOC_BIG)
turned on. FS checks for this flag and uses the alternative decoding
of the ioctl codes to determine the size when doing grants.

This unbreaks loadfont, although that still uses a phys copy in tty.
2006-07-25 09:41:40 +00:00
Philip Homburg
ee09d50403 Changed to use sys_readbios to get screen parameters. Added safecopy version
to get log messages.
2006-07-10 12:37:39 +00:00
Ben Gras
1561067ee4 Grant system dynamic-only. 2006-06-30 14:40:29 +00:00
Ben Gras
1c8b206a5d . Safe I/O, ioctl() and DIAGNOSTICS variants conversion - safe copies,
include grant id in DEV_REVIVE messages.
. Removal of TTY_FLAGS field (and so O_NONBLOCK support).
. Fixed CANCEL behaviour and return code on blocking I/O,
  previously handled by O_NONBLOCK
. Totally removed REVIVE replies, previously still possible on
  blocking ioctls (REVIVE directly called) and ptys (missing TTY_REVIVE
  check), removes deadlock bug with FS
. Removed obsolete *COMPAT options and associated code
2006-06-20 09:02:54 +00:00
Philip Homburg
e9aabcf2f8 Disabled building rescue driver (no longer needed). Moved allocmem from
library to the memory driver. Always put output from within TTY directly on
the console. Removed second include of driver.h from tty.c. Made tty_inrepcode
bigger. First step to move PM and FS calls that are not regular (API)
system calls out of callnr.h (renumbered them, and removed them from the
table.c files). Imported the Minix-vmd uname implementation. This provides
a more stable ABI than the current implementation. Added a bit of security
checking. Unfortunately not nearly enough to get a secure system. Fixed a
bug related to the sizes of the programs in the image (in PM patch_mem_chunks).
2006-05-19 12:19:37 +00:00
Ben Gras
471c1e5f00 reply failed to whom? 2006-03-24 12:45:35 +00:00
Jorrit Herder
376d8485d8 *** empty log message *** 2006-03-10 16:20:24 +00:00
Ben Gras
f877da3aec endpoint migration for drivers.
mostly renaming message field names to the new names.

tty stored process numbers in chars in tty and pty structs - now ints.
2006-03-03 10:21:45 +00:00
Ben Gras
65e7b878d4 getmachine info first, then init tty.
Problem report and fix given by:
Prof: Alejandro T. Bello Ruiz <abello@macareo.pucp.edu.pe>
2006-02-17 10:23:16 +00:00
Ben Gras
dc410a6245 #ifdeffed out some debug code 2006-02-06 15:02:19 +00:00
Philip Homburg
5556281540 Added /dev/video for mapping video memory. 2005-11-09 15:45:48 +00:00
Philip Homburg
0b5a135a67 Raw keyboard and AUX support. Needs cleaning up. 2005-10-24 13:57:19 +00:00
Ben Gras
7226f4685f Get out silly debug message 2005-10-13 08:49:42 +00:00
Jorrit Herder
ee1f2bcb39 Minor fixes for RS. Install signal handlers. 2005-10-12 15:06:00 +00:00
Ben Gras
87dbfc7dda Added DEV_PING message type to drivers (but not ethernet drivers) so
RS can monitor them.
2005-10-12 14:31:39 +00:00
Ben Gras
f463c247b6 Minor number for pty device nodes computed wrongly 2005-10-11 17:04:56 +00:00
Ben Gras
b9defa9abd select status should return minor device number instead of tty
line number
2005-10-04 12:04:00 +00:00
Ben Gras
8c4166ee85 Add SIGWINCH signal and functionality in tty and support in PM. 2005-10-03 12:03:57 +00:00
Philip Homburg
9f8f2484dd Forward debug output that originates within TTY first to the log device. 2005-09-30 13:01:34 +00:00
Ben Gras
bd85f7015e typo 2005-09-22 21:18:02 +00:00
Ben Gras
e3709af1b8 Andy's code fixes 2005-09-11 17:09:11 +00:00
Ben Gras
a32fa468f3 Make compiling with 0 pty's or rs232 lines possible (Al's patch) 2005-09-04 18:16:44 +00:00
Ben Gras
ae5f1f2286 ata-pci support for at driver.
added a hook in libdriver for HARD_INT messages.
2005-08-25 08:19:11 +00:00
Ben Gras
94ed5c2a4c Separated one-time keyboard initialization from per-console keyboard
initialization. One-time init is called from tty.

Side effect is that the one-time init is done after the sys_getmachine()
call, which makes set_leds() work, which makes numlock go off at booting.
2005-08-24 08:15:23 +00:00
Ben Gras
e2e90b1fdc Remove double-blank lines (Al) 2005-08-22 15:17:42 +00:00
Ben Gras
73847b7d50 *** empty log message *** 2005-08-05 16:48:44 +00:00
Jorrit Herder
e396496d8c Fixed small bug in alarm code.
Kernel timer count was not reset after expiry.
2005-08-05 16:46:27 +00:00
Ben Gras
0e3bef8597 pty select() support 2005-08-05 13:50:58 +00:00
Jorrit Herder
74711a3b14 Check if kernel calls is allowed (from process' call mask) added. Not yet
enforced. If a call is denied, this will be kprinted. Please report any such
errors, so that I can adjust the mask before returning errors instead of
warnings.

Wrote CMOS driver. All CMOS code from FS has been removed. Currently the
driver only supports get time calls. Set time is left out as an exercise
for the book readers ... startup scripts were updated because the CMOS driver
is needed early on. (IS got same treatment.) Don't forget to run MAKEDEV cmos
in /dev/, otherwise the driver cannot be loaded.
2005-08-04 19:23:03 +00:00
Jorrit Herder
e561081545 Miscellaneous clean ups and fixes to the kernel.
Support for FLOPPY in boot image. (Set controller=fd at boot monitor.)
Moved major device numbers to <minix/dmap.h> (maybe rename to dev.h?)
2005-08-04 09:26:36 +00:00
Jorrit Herder
52965b6f17 Various updates to support dynamically starting drivers.
Output during initialization should be suppressed. Unless an error occurs.
Note that main() can now be main(int argc, char **argv) and arguments can
be passed when bringing up the driver.
2005-08-02 15:30:36 +00:00
Philip Homburg
537d7ddcdf Replace REVIVE with notify. 2005-08-01 14:40:21 +00:00
Philip Homburg
a93faca75f rs232 support 2005-07-29 15:22:58 +00:00
Jorrit Herder
aec394a330 Updated drivers according to syslib interface changes. 2005-07-29 15:00:22 +00:00
Jorrit Herder
d62e515660 Small update to SYS_IRQCTL -> setting an interrupt policy now allows the caller
to provide an index (0 .. 31) that is passed in the HARD_INT message when an
interrupt occurs. The NOTIFY_ARG field contains a bitmap with all indexes for
which an interrupt occured.
2005-07-29 12:44:42 +00:00
Jorrit Herder
fe0dcb5c00 AT driver is not modified (debugging only);
TTY: select and revive with new notify and FS call back;
kernel: removed old notify code; removed ugly prepare_shutdown timer
kputc: don't send to FS if PRINTF_PROC fails
2005-07-27 14:32:16 +00:00
Jorrit Herder
d2d975246d Kernel sends SIGKSTOP just before shutdown. Drivers do clean up and exit. 2005-07-20 15:28:05 +00:00
Jorrit Herder
8c024e28a1 Changed Makefiles: drivers are now installed in /usr/sbin.
TTY now gets SYS_EVENT message with sigset (e.g., SIGKMESS, SIGKSTOP).
2005-07-19 12:12:48 +00:00
Jorrit Herder
279250889f Renamed some system library functionality. 2005-07-14 15:15:18 +00:00
Jorrit Herder
5654996c07 New Makefiles for mkdep script. 2005-06-24 16:21:54 +00:00
Ben Gras
471e0448c3 Changed timer library function args.
Added select() support for tty fd's (not ptys yet).
2005-06-17 13:37:41 +00:00
Jorrit Herder
6d23f072f3 Cleaned up src/lib/utils library. Renamed server_ functions to more logical
names. All system processes can now either use panic() or report() from
libutils, or redefine their own function. Assertions are done via the standard
<assert.h> functionality.
2005-06-01 14:31:00 +00:00
Ben Gras
5a43b84e2d Fix for 'the kermit problem' (keyrepeats happening before the keyrepeat
timeout). A fix is to treat the alarm and interrupt cases differently and
only call the interrupt handler when an actual interrupt has been seen. No
apparent adverse effects.
2005-05-31 15:22:06 +00:00