Commit graph

38 commits

Author SHA1 Message Date
Arun Thomas
436d6012a3 Convert drivers/ and servers/ over to bsdmake
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Arun Thomas
b706112487 Incorporate bsdmake into buildsystem and reorganize libs 2010-02-16 14:41:33 +00:00
Kees van Reeuwijk
c6eb51d66a Rewrite some functions to ANSI style. 2010-01-27 10:19:13 +00:00
Cristiano Giuffrida
6f912993ff Share exec images in RS.
RS CHANGES:
- RS retains information on both labels and process names now. Labels for boot
processes are configured in the boot image priv table. Process names are
inherited from the in-kernel boot image table.
- When RS_REUSE is specified in do_up, RS looks for an existing slot having the
same process name as the one we are about to start. If one is found with
an in-memory copy of its executable image, the image is then shared between
the two processes, rather than copying it again. This behavior can be specified
by using 'service -r' when starting a system service from the command line.
2009-12-23 14:05:20 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
Cristiano Giuffrida
e090013056 Drivers and servers are simply known as services.
/etc CHANGES:
- /etc/drivers.conf has been renamed to /etc/system.conf. Every entry in 
the file is now marked as "service" rather than driver.
- user "service" has been added to password file /etc/passwd.
- docs/UPDATING updated accordingly, as well as every other mention to the old
drivers.conf in the system.

RS CHANGES:
- No more distinction between servers and drivers.
- RS_START has been renamed to RS_UP and the old legacy RS_UP and RS_UP_COPY
dropped.
- RS asks PCI to set / remove ACL entries only for services whose ACL properties
have been set. This change eliminates unnecessary warnings.
- Temporarily minimize the risk of potential races at boot time or when starting
a new service. Upcoming changes will eliminate races completely.
- General cleanup.
2009-12-17 01:53:26 +00:00
Ben Gras
cb50e7e135 support for OSS. 2009-10-01 16:36:14 +00:00
Ben Gras
89bf7bae27 - tty: only report unrecognized scancodes once; forget about
remembering the origin and cursor position as that feature didn't
   really work properly anyway
 - tty: map in video and font memory using a vm call, access it from C,
   thereby eliminating pesky weird segment calls and assembly to access it,
   and unbreaks loadfont (Roman Ignatov)
 - bios_wini: fix bios_wini by allocating a <1MB buffers for it
 - memory: preallocate ramdisk, makes it a bit faster (and doesn't
   fail halfway if you allocate a huge one)
 - floppy: use <1MB buffer
 - ramdisk proto: because of the 2x1 page reservations, binaries
   got a little fatter and didn't fit on the ramdisk any more.
   increase it.
2009-09-21 14:25:54 +00:00
Thomas Veerman
b47483433c Added a hack to start binaries from the boot image only. In particular, setting
bin_img=1 in the boot monitor will make sure that during the boot procedure the
mfs binary that is part of the boot image is the only binary that is used to
mount partitions. This is useful when for some reason the mfs binary on disk 
malfunctions, rendering Minix unable to boot. By setting bin_img=1, the binary
on disk is ignored and the binary in the boot image is used instead.

- 'service' now accepts an additional flag -r. -r implies -c. -r instructs RS
  to first look in memory if the binary has already been copied to memory and
  execute that version, instead of loading the binary from disk. For example,
  the first time a MFS is being started it is copied (-c) to memory and
  executed from there. The second time MFS is being started this way, RS will
  look in memory for a previously copied MFS binary and reuse it if it exists.
- The mount and newroot commands now accept an additional flag -i, which
  instructs them to set the MS_REUSE flag in the mount flags.
- The mount system call now supports the MS_REUSE flag and invokes 'service'
  with the -r flag when MS_REUSE is set.
- /etc/rc and the rc script that's included in the boot image check for the
  existence of the bin_img flag in the boot monitor, and invoke mount and 
  newroot with the -i flag accordingly.
2009-08-18 11:36:01 +00:00
Ben Gras
ad87da99d3 bigger ramdisk for bigger binaries 2009-01-09 17:47:18 +00:00
Ben Gras
1d8aed840c . no more HZ, but use sys_hz() to get that value
. memory maps in physical memory (for /dev/mem) with new vm interface
 . pci complete_bars() seems to be buggy behaviour sometimes
 . startup script opens its own stdout, stderr and stdin so init doesn't
   have to do it
2008-12-11 14:42:23 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
acfaea0fa2 More space on ramdisk 2007-08-07 11:22:35 +00:00
Ben Gras
3b08825d85 . service tells you which device it couldn't stat
. bigger rs and ramdisk for drivers
. sanity check for pv_set macro for oversized arguments
2007-02-23 18:22:46 +00:00
Ben Gras
9f2f3dd488 don't call mkdep with an absolute path 2007-02-08 16:26:20 +00:00
Ben Gras
ebde52a9bc supply instance to 2nd at_wini instance.
requires a little cooperation from at_wini.
2007-02-08 14:23:03 +00:00
Ben Gras
a12c7ad963 Start a 2nd copy of at_wini, for /dev/c1*. This requires a slightly
larger rs.
2007-02-08 14:04:59 +00:00
Ben Gras
63a271200e Make /dev/c1* device nodes on disk and on the boot ramdisk.
. include c1* nodes in std in MAKEDEV
 . this requires a slightly larger shell
 . this requires a larger blocksize on the boot ramdisk (to fit
   /dev/ in direct blocks for mkfs with a proto file)
 . also more inodes and kB's on the boot ramdisk
2007-02-08 13:51:35 +00:00
Ben Gras
ce5add84e8 put mfs in /sbin, where mount expects it. 2007-01-24 15:50:04 +00:00
Philip Homburg
954ad990e5 at_wini now calls pci_reserve. 2006-11-01 14:55:00 +00:00
Philip Homburg
0c1d433f60 rs changes (also use driver configurations in the image ramdisk) 2006-10-31 13:35:04 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Ben Gras
fa0ba56bc9 Merge of VFS by Balasz Gerofi with Minix trunk. 2006-10-25 13:40:36 +00:00
Philip Homburg
0b2c167c48 Bigger ramdisk 2006-10-20 13:59:42 +00:00
Ben Gras
cac387bc1e Clean ramdisk image .s too 2006-07-06 14:09:54 +00:00
Philip Homburg
373ea53510 A bigger ramdisk is needed for the new version of ash. 2006-06-07 14:39:50 +00:00
Philip Homburg
94717cb74c Pass -c flags to service for disk device drivers. 2006-05-11 14:53:20 +00:00
Ben Gras
261ae3b463 Use /dev instead of MAKEDEV because release builds are run as bin. 2006-04-03 19:36:15 +00:00
Ben Gras
38676609c1 Don't redirect stderr to /dev/null 2006-04-03 18:47:28 +00:00
Ben Gras
dcb0fee484 script to generate /dev part of proto file. 2006-04-03 15:01:43 +00:00
Philip Homburg
7fecfd3740 Use assembler instead of C for the ramdisk. The assembler requires less
memory.
2006-03-15 14:28:05 +00:00
Philip Homburg
5731e07839 Some /dev entries for c0d7. 2006-03-13 15:37:43 +00:00
Ben Gras
28324dc841 Fixed wrong fix 2006-03-07 14:58:18 +00:00
Ben Gras
f5029b721a Include boot options 2006-03-07 14:32:41 +00:00
Ben Gras
e7657e1b67 Added some of my root devices 2006-02-17 11:58:02 +00:00
Philip Homburg
7034c0795d Moved PCI driver to the ramdisk. 2006-02-15 14:21:56 +00:00
Philip Homburg
c3a88d15d8 Initial root filesystem is now on a ramdisk that is part of the image. 2006-02-15 11:18:21 +00:00