There is important information about booting non-ack images in
docs/UPDATING. ack/aout-format images can't be built any more, and
booting clang/ELF-format ones is a little different. Updating to the
new boot monitor is recommended.
Changes in this commit:
. drop boot monitor -> allowing dropping ack support
. facility to copy ELF boot files to /boot so that old boot monitor
can still boot fairly easily, see UPDATING
. no more ack-format libraries -> single-case libraries
. some cleanup of OBJECT_FMT, COMPILER_TYPE, etc cases
. drop several ack toolchain commands, but not all support
commands (e.g. aal is gone but acksize is not yet).
. a few libc files moved to netbsd libc dir
. new /bin/date as minix date used code in libc/
. test compile fix
. harmonize includes
. /usr/lib is no longer special: without ack, /usr/lib plays no
kind of special bootstrapping role any more and bootstrapping
is done exclusively through packages, so releases depend even
less on the state of the machine making them now.
. rename nbsd_lib* to lib*
. reduce mtree
- When cancelling ioctls, VFS did not remember which file descriptor
to cancel and sent bogus to the driver.
- Select state was not cleaned up when select()ing process was
interrupted.
- Process trying to do a system call at the exact same time as a user
trying to interrupt the process, could cause the system call worker
thread to overwrite state belonging to the worker thread trying to
exit the process. This led to hanging threads and eventual system hang
when this happens often enough.
When a mount operation fails and the FS exits, free_proc could try and
clean up resources associated with the mount point before the mount
thread itself can do that. However, the clean up procedure should only
clean up resources that were actually in use.
Currently, all servers and drivers run as root as they are forks of
RS. srv_fork now tells PM with which credentials to run the resulting
fork. Subsequently, PM lets VFS now as well.
This patch also fixes the following bugs:
- RS doesn't initialize the setugid variable during exec, causing the
servers and drivers to run setuid rendering the srv_fork extension
useless.
- PM erroneously tells VFS to run processes setuid. This doesn't
actually lead to setuid processes as VFS sets {r,e}uid and {r,e}gid
properly before checking PM's approval.
When an FS crashes, VFS will clean up resources tied to that FS:
- Pending requests to the FS are canceled (i.e., fail with EIO)
- Threads waiting for a reply are stopped (i.e., fail with EIO)
- Open files are marked invalid. Future operations on a file descriptor
will cause EBADF errors.
- vmnt entry is cleared, so in-flight system calls that got past the
file descriptor check but not yet talking to the crashed FS, will
fail with EIO.
- The reference counter of the mount point is decreased, effectively
removing the crashed FS from the file system tree. Descendants of
this part of the tree are unreachable by means of a path, but can
still be unmounted by feeding the block special file to unmount(2).
This patch also gets rid of the "not a known driver endpoint" messages
during shutdown.
User processes can send signals with number up to _NSIG. There are a few
signal numbers above that used by the kernel, but should explicitly not
be included in the range or range checks in PM will fail.
The system processes use a different version of sigaddset, sigdelset,
sigemptyset, sigfillset, and sigismember which does not include a range
check on signal numbers (as opposed to the normal functions used by normal
processes).
This patch unbreaks test37 when the boot image is compiled with GCC/Clang.
Last_dir didn't consider paths that end in a symlink and hence didn't
actually return the last_dir when provided with one. For example,
/var/log is a symlink to /usr/log. Issuing `>/var/log' would trigger
an assert in AVFS, because /var/ is not the actual last directory; /usr/
is.
Last_dir now verifies the final component is not a symlink. If it is, it
follows the symlink and restarts finding of the last the directory.
When a lock has read-serialized and read-only locks, releasing the read-
serialized lock would not set the state to read-only when no other locks
were pending.
. also implement now-possible fsck -p option
. allows unconditional fsck -p invocation at startup,
only checking each filesystem if not marked clean
. mounting unclean is allowed but is forced readonly
. updating the superblock while mounted is now not
allowed by mfs - must be done (e.g. by fsck.mfs)
on an unmounted fs
. clean flag is unset by mfs on mounting, and set by
mfs on clean unmounting (if clean flag was set at
mount time)
Signed-off-by: Ben Gras <ben@minix3.org>
. use dirty marking hooks to check and warn
when inodes/bufs are marked dirty on a readonly
mounted fs
. add readonly mount checks to restore readonly
mounting
Signed-off-by: Ben Gras <ben@minix3.org>
. No functional change
. Only serves to get hooks to do checks in
. e.g. should things be marked dirty when we are
mounted readonly
Signed-off-by: Ben Gras <ben@minix3.org>
Some code relies on having the file descriptor in m_in.fd. Consequently,
m_in is not only used to provide syscall parameters from user space to
VFS, but also as a global variable to store temporary data within VFS.
This has the ugly side effect that m_in gets overwritten during core
dumping.*
To work around this problem VFS now uses a so called "scratchpad" to
store temporary data that has to be globally accessible. This is a simple
table indexed by process number, just like fproc. The scratchpad allows
us to store the buffer pointer and buffer size for suspended system calls
(i.e., read, write, open, lock) instead of using fproc. This makes fproc
a bit smaller and fproc iterators a bit faster. Moreover, suspension of
processes becomes simpler altogether and suspended operations on pipes
are now less of a special case.
* This patch fixes a bug where due to unexpected m_in overwriting a
coredump would fail, and consequently resources are leaked. The coredump
was triggered with:
$ a() { a; }
$ a
This patch makes PFS, EXT2 and MFS print only once that they're out of
space. After freeing up space and running out of space again, the message
will be printed again also.
The nbyte in read(int fildes, void *buf, size_t nbyte) is unsigned,
so although technically we're doing the same comparison, this is more
in line with POSIX.
The comparison was moved to read_write as that routine is used within
VFS to let it VFS write out coredumps.
When a process wants something done from VFS, but VFS has no worker
threads available, the request is stored and executed later. However,
when PM also sends a request for that process at the same time, discard
the pending request from the process and give priority to PM. The request
PM sends is either an EXIT or a DUMPCORE request, so we're not interested
in executing the pending request anyway.
This patch provides basic protection against damage resulting from
differently compiled servers blindly copying tables to one another.
In every getsysinfo() call, the caller is provided with the expected
size of the requested data structure. The callee fails the call if
the expected size does not match the data structure's actual size.
Using sendrec directly only results in problems. While it is not
clear whether using fs_sendrec is the best option, it is at least
an improvement.
Also remove some legacy cruft.
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.
The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.
After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
reintroduced
As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.
Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
. make procfs check it
. detects pm/procfs mismatches
. was triggered by ack/clang pm/procfs:
add padding to mproc struct to align ack/clang layout
to fix this
The "bdev" library provides basic primitives for file systems to talk
to block device drivers, hiding the details of the underlying protocol
and interaction model.
This version of libbdev is rather basic. It is planned to support the
following features in the long run:
- asynchronous requests and replies;
- recovery support for underlying block drivers;
- retrying of failed I/O requests.
The commit also changes our block-based file systems (mfs, ext2, isofs)
to make use of libbdev.
In certain cases, a process ID may be reused between two lazy updates
of procfs's PID table. If the new associated process slot has a lower
index than the old one, this will trigger an assert in vtreefs, as the
new PID name entry is added before the old one is removed. This patch
fixes the problem by always first removing old PID name entries before
adding new ones.
Bug reported by Stephen Hatton.
PUFFS file systems need to make back calls for every operation we
send to them. Consequently, they cannot handle block reads and writes
themselves. Instead, the root file system has to do it (for now).
When the mount operation causes an FS to make a back call, AVFS now
concludes that every block read and write for that FS has to go
through the root file system.
In some places it was assumed that PATH_MAX does not include a
terminating null character.
Increases PATH_MAX to 1024 to get in sync with NetBSD. Required some
rewriting in AVFS to keep memory usage low (the stack in use by a thread
is very small).
. move cache size heuristic from mfs there
so mfs and ext2 can share it
. add vfs credentials retrieving function, with
backwards compatability from previous struct
format, to be used by both ext2 and mfs
. fix for ext2 - STATICINIT was fed no.
of bytes instead of no. of elements, overallocating
memory by a megabyte or two for the superblock
During shutdown all processes are semi-exited and FSes are unmounted.
This semi-exit causes trouble for FUSE mounts as they still need access
to file descriptors and working directory in order to unmount.
. move mfs-specific struct, constants to mfs/, so
mfs-specific, on-disk format structs and consts are
fully isolated from generic structs and functions
. removes de and readfs utils
. only use for single-page invalidations initially
. shows tiny but statistically significant performance
improvement; will be more helpful in certain VM debug
modes
. ipc wants to know about processes that get
signals, so that it can break blocking ipc operations
. doing it for every single signal is wasteful
and causes the annoying 'no slot for signals' message
. this fix tells vm on a per-process basis it (ipc)
wants to be notified, i.e. only when it does any ipc calls
. move ipc config to separate config file while we're at it
. it's a good extra interface to have but doesn't
meet standardised functionality
. applications (in pkgsrc) find it and expect
full functionality the minix mmap doesn't offter
. on the whole probably better to hide these functions
(mmap and friends) until they are grown up; the base system
can use the new minix_* names
. MAP_SHARED was used to implement sysv shared memory
. used to signal shareable memory region to VM
. assumptions about this situation break when processes
use MAP_SHARED for its normal, standardised meaning
POSIX truncate specification says "Upon successful completion, if
the *file size is changed*, this function shall mark for update the
st_ctime and st_mtime fields of the file." This patch prevents
changing of the date fields when the size stays the same.
* VFS and installed MFSes must be in sync before and after this change *
Use struct stat from NetBSD. It requires adding new STAT, FSTAT and LSTAT
syscalls. Libc modification is both backward and forward compatible.
Also new struct stat uses modern field sizes to avoid ABI
incompatibility, when we update uid_t, gid_t and company.
Exceptions are ino_t and off_t in old libc (though paddings added).
3 sets of libraries are built now:
. ack: all libraries that ack can compile (/usr/lib/i386/)
. clang+elf: all libraries with minix headers (/usr/lib/)
. clang+elf: all libraries with netbsd headers (/usr/netbsd/)
Once everything can be compiled with netbsd libraries and headers, the
/usr/netbsd hierarchy will be obsolete and its libraries compiled with
netbsd headers will be installed in /usr/lib, and its headers
in /usr/include. (i.e. minix libc and current minix headers set
will be gone.)
To use the NetBSD libc system (libraries + headers) before
it is the default libc, see:
http://wiki.minix3.org/en/DevelopersGuide/UsingNetBSDCode
This wiki page also documents the maintenance of the patch
files of minix-specific changes to imported NetBSD code.
Changes in this commit:
. libsys: Add NBSD compilation and create a safe NBSD-based libc.
. Port rest of libraries (except libddekit) to new header system.
. Enable compilation of libddekit with new headers.
. Enable kernel compilation with new headers.
. Enable drivers compilation with new headers.
. Port legacy commands to new headers and libc.
. Port servers to new headers.
. Add <sys/sigcontext.h> in compat library.
. Remove dependency file in tree.
. Enable compilation of common/lib/libc/atomic in libsys
. Do not generate RCSID strings in libc.
. Temporarily disable zoneinfo as they are incompatible with NetBSD format
. obj-nbsd for .gitignore
. Procfs: use only integer arithmetic. (Antoine Leca)
. Increase ramdisk size to create NBSD-based images.
. Remove INCSYMLINKS handling hack.
. Add nbsd_include/sys/exec_elf.h
. Enable ELF compilation with NBSD libc.
. Add 'make nbsdsrc' in tools to download reference NetBSD sources.
. Automate minix-port.patch creation.
. Avoid using fstavfs() as it is *extremely* slow and unneeded.
. Set err() as PRIVATE to avoid name clash with libc.
. [NBSD] servers/vm: remove compilation warnings.
. u32 is not a long in NBSD headers.
. UPDATING info on netbsd hierarchy
. commands fixes for netbsd libc
sys_umap now supports only:
- looking up the physical address of a virtual address in the address space
of the caller;
- looking up the physical address of a grant for which the caller is the
grantee.
This is enough for nearly all umap users. The new sys_umap_remote supports
lookups in arbitrary address spaces and grants for arbitrary grantees.
- Remove redundant code.
- Always wait for the initial reply from an asynchronous select request,
even if the select has been satisfied on another file descriptor or
was canceled due to a serious error.
- Restart asynchronous selects if upon reply from the driver turns out
that there are deferred operations (and do not forget we're still
interested in the results of the deferred operations).
- Do not hang a non-blocking select when another blocking select on
the same filp is still blocking.
- Split blocking operations in read, write, and exceptions (i.e.,
blocking on read does not imply the write will block as well).
- Some loops would iterate over OPEN_MAX file descriptors instead of
the "highest" file descriptor.
- Use proper internal error return values.
- A secondary reply from a synchronous driver is essentially the same
as from an asynchronous driver (the only difference being how the
answer is received). Merge.
- Return proper error code after a driver failure.
- Auto-detect whether a driver is synchronous or asynchronous.
- Remove some code duplication.
- Clean up code (coding style, add missing comments, put all select
related code together).
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
Dhcp only works if devices are configured with a broadcast source
address at the begining as it currently uses raw ip sockets and the
sockets sets the source address. It is a quick hack and proper hdcpd
fix is preferable
- on driver restarts, reopen devices on a per-file basis, not per-mount
- do not assume that there is just one vnode per block-special device
- update block-special files in the uncommon mounting success paths, too
- upon mount, sync but also invalidate affected buffers on the root FS
- upon unmount, check whether a vnode is in use before updating it
Take into account the ALL and ALL_SYS cases when constructing proper
symmetrical IPC send masks. Fix system.conf accordingly, to keep
userland processes from sending to several non-interface servers and
drivers. Also fix IS's F4 formatting.
From now on, the "ipc" directive in system.conf refers to process names
instead of labels, similar to the "control" directive. The old, more
fine-grained approach is deemed unnecessary and cumbersome at this time.
As side effects, this patch unbreaks late IPC permission computation as
well as the filter driver.
- regions were preivous stored in a linked list, as 'normally'
there are just 2 or 3 (text, data, stack), but that's slow
if lots of regions are made with mmap()
- measurable performance improvement with gcc and clang
- profile --nmi | --rtc sets the profiling mode
- --rtc is default, uses BIOS RTC, cannot profile kernel the presetted
frequency values apply
- --nmi is only available in APIC mode as it uses the NMI watchdog, -f
allows any frequency in Hz
- both modes use compatible data structures
- EBADCPU is returned is scheduler tries to run a process on a CPU
that either does not exist or isn't booted
- this change was originally meant to deal with stupid cpuid
instruction which provides totally useless information about
hyper-threading and MPS which does not deal with ht at all. ACPI
provides correct information. If ht is turned off it looks like some
CPUs failed to boot. Nevertheless this patch may be handy for
testing/benchmarking in the future.
- RTS_VMINHIBIT flag is used to stop process while VM is fiddling with
its pagetables
- more generic way of sending synchronous scheduling events among cpus
- do the x-cpu smp sched calls only if the target process is runnable.
If it is not, it cannot be running and it cannot become runnable
this CPU holds the BKL
- sys_schedule can change only selected values, -1 means that the
current value should be kept unchanged. For instance we mostly want
to change the scheduling quantum and priority but we want to keep
the process at the current cpu
- RS can hand off its processes to scheduler
- service can read the destination cpu from system.conf
- RS can pass the information farther
- machine information contains the number of cpus and the bsp id
- a dummy SMP scheduler which keeps all system processes on BSP and
all other process on APs. The scheduler remembers how many processes
are assigned to each CPU and always picks the one with the least
processes for a new process.
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
