Commit graph

54 commits

Author SHA1 Message Date
Kees van Reeuwijk
a2c8ae42e9 Remove iov_src variables, that were only declared and incremented,
but never used, all over the network drivers.
2010-01-20 21:31:59 +00:00
Kees van Reeuwijk
53f9f943a8 Rewrote a number of cases where variables were used before they initialized. 2010-01-20 17:59:48 +00:00
Cristiano Giuffrida
c5b309ff07 Merge of Wu's GSOC 09 branch (src.20090525.r4372.wu)
Main changes:
- COW optimization for safecopy.
- safemap, a grant-based interface for sharing memory regions between processes.
- Integration with safemap and complete rework of DS, supporting new data types
  natively (labels, memory ranges, memory mapped ranges).
- For further information:
  http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants

Additional changes not included in the original Wu's branch:
- Fixed unhandled case in VM when using COW optimization for safecopy in case
  of a block that has already been shared as SMAP.
- Better interface and naming scheme for sys_saferevmap and ds_retrieve_map
  calls.
- Better input checking in syslib: check for page alignment when creating
  memory mapping grants.
- DS notifies subscribers when an entry is deleted.
- Documented the behavior of indirect grants in case of memory mapping.
- Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked
  and extended.
- Minor fixes and general cleanup.
- TO-DO: Grant ids should be generated and managed the way endpoints are to make
sure grant slots are never misreused.
2010-01-14 15:24:16 +00:00
Cristiano Giuffrida
d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
Tomas Hruby
ae75f9d4e5 Removal of the executable flag from files that cannot be executed
- 755 -> 644
2009-11-09 10:26:00 +00:00
David van Moolenbroek
b423d7b477 Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
  being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
  AMF_NOREPLY senda() flag

DETAILS

Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
  aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
  and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
  stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
  VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
  running while modifying its process structure

Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
  the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
  protocol message
o Detached debugger signals from general signal logic and from being
  blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
  one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
  are pending
o Fixed wait test for tracer, which was returning for children that were
  not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
  debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG

Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
  debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
  of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
  a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
  structure
o Removed T_STOP ptrace request again, as it does not help implementing
  debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)

Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
  with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
  satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
  #define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
  revealed RS-PM-VFS race condition triangle until VFS is asynchronous

System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
  signal set, rather than just the POSIX subset

Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
  structure clearer
o Fixed setpriority() being able to put to sleep processes using an
  invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there

Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code

THINGS OF POSSIBLE INTEREST

o It should now be possible to run PM at any priority, even lower than
  user processes
o No assumptions are made about communication speed between PM and VFS,
  although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
  only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 09:57:22 +00:00
Tomas Hruby
4dad30937b Removed macros that depend on NOTIFY_FROM from servers and drivers. They
determine the information defined by these macros from the m_source field of the
notify message.
2009-09-29 18:47:56 +00:00
Arun Thomas
f149733e16 Disable IOMMU warnings. 2009-04-22 16:53:46 +00:00
Arun Thomas
3b37103fa3 Make the rtl8139 and orinoco drivers handle the system shutdown case
like other drivers. Also, some minor cleanups.
2009-04-22 12:42:37 +00:00
Ben Gras
567f2f0ba0 umap fix 2008-12-08 17:06:38 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Philip Homburg
404325b193 Support for I/O MMU. 2008-02-25 10:19:29 +00:00
Ben Gras
cd4756933a Typo reported by Johnathan Gurley. 2007-07-17 11:40:02 +00:00
Philip Homburg
a124958e59 Use ds_retrieve_u32 to get the endpoint of inet. 2007-05-02 11:32:22 +00:00
Philip Homburg
50f81c4939 Ethernet driver changes for asynchronous inet. 2007-04-23 15:38:00 +00:00
Ben Gras
9f2f3dd488 don't call mkdep with an absolute path 2007-02-08 16:26:20 +00:00
Philip Homburg
78fe72e198 Many more IDs. 2007-01-19 17:27:51 +00:00
Philip Homburg
7d6b1dcf1e PCI IDs for Accton SMC2-1211TX 2007-01-18 11:40:13 +00:00
Ben Gras
6f77685609 Split of architecture-dependent and -independent functions for i386,
mainly in the kernel and headers. This split based on work by
Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture
port.

 . kernel does not program the interrupt controller directly, do any
   other architecture-dependent operations, or contain assembly any more,
   but uses architecture-dependent functions in arch/$(ARCH)/.
 . architecture-dependent constants and types defined in arch/$(ARCH)/include.
 . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now,
   architecture-independent functions.
 . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls
   and live in arch/i386/do_* now.
 . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have
   gone, and 'machine.protected' is gone (and always taken to be 1 in i386).
   If 86 support is to return, it should be a new architecture.
 . prototypes for the architecture-dependent functions defined in
   kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h
 . /etc/make.conf included in makefiles and shell scripts that need to
   know the building architecture; it defines ARCH=<arch>, currently only
   i386.
 . some basic per-architecture build support outside of the kernel (lib)
 . in clock.c, only dequeue a process if it was ready
 . fixes for new include files

files deleted:
 . mpx/klib.s - only for choosing between mpx/klib86 and -386
 . klib86.s - only for 86

i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/:
 . mpx386.s (entry point)
 . klib386.s
 . sconst.h
 . exception.c
 . protect.c
 . protect.h
 . i8269.c
2006-12-22 15:22:27 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Ben Gras
21ed846479 More memory for these drivers 2006-10-25 13:39:53 +00:00
Philip Homburg
2cf649db2e Safecopy support in ethernet drivers. 2006-07-10 12:43:38 +00:00
Ben Gras
0d39b17655 Changed order of -lsys and -lsysutil for printf() 2006-06-20 10:50:29 +00:00
Ben Gras
7b58dd7f9b Renamed findproc() to _pm_findproc() to reduce polluting of application
namespace.
2006-03-25 04:49:04 +00:00
Jorrit Herder
376d8485d8 *** empty log message *** 2006-03-10 16:20:24 +00:00
Philip Homburg
24cf667abb PCI support in a separate driver. 2005-12-02 14:45:10 +00:00
Philip Homburg
e6e1f4431d Make I/O port check less strict 2005-11-03 11:33:42 +00:00
Jorrit Herder
f8edaa7de4 Added replies to status requests from RS. 2005-10-21 14:39:21 +00:00
Jorrit Herder
78f20c3959 Rest ... 2005-10-21 13:46:47 +00:00
Jorrit Herder
dd49f3586f New Rescue Device Driver (RAM disk like)
Allow restarting RTL8139
2005-10-21 13:24:22 +00:00
Ben Gras
f1549d7ac7 Typo fix by Al. 2005-09-27 18:25:08 +00:00
Ben Gras
e2e90b1fdc Remove double-blank lines (Al) 2005-08-22 15:17:42 +00:00
Philip Homburg
655d1e074f get_mon_params -> env_get_params. 2005-08-05 16:21:32 +00:00
Ben Gras
53eba5e044 'send locked' debug statement #if 0ed 2005-08-05 12:55:18 +00:00
Jorrit Herder
375f6f8754 Miscellaneous cleanups. 2005-08-03 11:53:36 +00:00
Jorrit Herder
52965b6f17 Various updates to support dynamically starting drivers.
Output during initialization should be suppressed. Unless an error occurs.
Note that main() can now be main(int argc, char **argv) and arguments can
be passed when bringing up the driver.
2005-08-02 15:30:36 +00:00
Jorrit Herder
aec394a330 Updated drivers according to syslib interface changes. 2005-07-29 15:00:22 +00:00
Jorrit Herder
d62e515660 Small update to SYS_IRQCTL -> setting an interrupt policy now allows the caller
to provide an index (0 .. 31) that is passed in the HARD_INT message when an
interrupt occurs. The NOTIFY_ARG field contains a bitmap with all indexes for
which an interrupt occured.
2005-07-29 12:44:42 +00:00
Jorrit Herder
d2d975246d Kernel sends SIGKSTOP just before shutdown. Drivers do clean up and exit. 2005-07-20 15:28:05 +00:00
Jorrit Herder
5594b767c0 Renamed src/lib/utils to src/lib/sysutil --- because of new src/lib/util 2005-07-19 13:21:51 +00:00
Jorrit Herder
8c024e28a1 Changed Makefiles: drivers are now installed in /usr/sbin.
TTY now gets SYS_EVENT message with sigset (e.g., SIGKMESS, SIGKSTOP).
2005-07-19 12:12:48 +00:00
Jorrit Herder
279250889f Renamed some system library functionality. 2005-07-14 15:15:18 +00:00
Jorrit Herder
5654996c07 New Makefiles for mkdep script. 2005-06-24 16:21:54 +00:00
Jorrit Herder
ec24a0798c Updated function key mapping because of possible changes to NOTIFY.
The TTY driver now only notifies the IS server about function key event,
but does not tell which keys are pressed. The IS servers queries the TTY
driver to find out about this.
2005-06-20 14:23:31 +00:00
Philip Homburg
b658df42d0 Use relative paths. 2005-06-06 16:18:05 +00:00
Jorrit Herder
c281867f46 Fixed bug relating to FS and MEMORY during startup;
Relocated some syslib functions to utils library;
Changed location of 'Multiuser startup ..." echo in /etc/rc
2005-06-06 09:30:44 +00:00
Jorrit Herder
f2a85e58d9 Various updates.
* Removed some variants of the SYS_GETINFO calls from the kernel;
  replaced them with new PM and utils libary functionality. Fixed
  bugs in utils library that used old get_kenv() variant.
* Implemented a buffer in the kernel to gather random data.
  Memory driver periodically checks this for /dev/random.
  A better random algorithm can now be implemented in the driver.
  Removed SYS_RANDOM; the SYS_GETINFO call is used instead.
* Remove SYS_KMALLOC from the kernel. Memory allocation can now
  be done at the process manager with new 'other' library functions.
2005-06-03 13:55:06 +00:00
Ben Gras
308d9a693c prettified rtl driver:
. no more kmalloc
 . no more umaps + physcopies / abscopies
 . the status register is directly readable from the drivers own
   address space now, and no physcopy is needed to read it
 . map+physcopy call combinations are replaced by vircopy calls
2005-06-03 08:59:54 +00:00
Jorrit Herder
6d23f072f3 Cleaned up src/lib/utils library. Renamed server_ functions to more logical
names. All system processes can now either use panic() or report() from
libutils, or redefine their own function. Assertions are done via the standard
<assert.h> functionality.
2005-06-01 14:31:00 +00:00