Commit graph

18 commits

Author SHA1 Message Date
Ben Gras
d69cc76e03 rename struct mem_range to minix_mem_range
. avoid a name clash with gdb
2012-08-15 15:17:25 +02:00
Ben Gras
7336a67dfe retire PUBLIC, PRIVATE and FORWARD 2012-03-25 21:58:14 +02:00
Ben Gras
6a73e85ad1 retire _PROTOTYPE
. only good for obsolete K&R support
	. also remove a stray ansi.h and the proto cmd
2012-03-25 16:17:10 +02:00
David van Moolenbroek
e8d2d2f6b6 libminc-related updates
- add files needed for acpi, ahci, fbd, vfs to libminc
- remove "-lc" from their respective makefiles
- remove setenv from libminc (requires initialization)
2012-03-12 23:16:45 +01:00
David van Moolenbroek
ca95f69f25 drivers: resolve compiler warnings 2012-03-05 22:32:55 +01:00
Ben Gras
2fe8fb192f Full switch to clang/ELF. Drop ack. Simplify.
There is important information about booting non-ack images in
docs/UPDATING. ack/aout-format images can't be built any more, and
booting clang/ELF-format ones is a little different. Updating to the
new boot monitor is recommended.

Changes in this commit:

	. drop boot monitor -> allowing dropping ack support
	. facility to copy ELF boot files to /boot so that old boot monitor
	  can still boot fairly easily, see UPDATING
	. no more ack-format libraries -> single-case libraries
	. some cleanup of OBJECT_FMT, COMPILER_TYPE, etc cases
	. drop several ack toolchain commands, but not all support
	  commands (e.g. aal is gone but acksize is not yet).
	. a few libc files moved to netbsd libc dir
	. new /bin/date as minix date used code in libc/
	. test compile fix
	. harmonize includes
	. /usr/lib is no longer special: without ack, /usr/lib plays no
	  kind of special bootstrapping role any more and bootstrapping
	  is done exclusively through packages, so releases depend even
	  less on the state of the machine making them now.
	. rename nbsd_lib* to lib*
	. reduce mtree
2012-02-14 14:52:02 +01:00
Jan Wieck
2fe79d0b76 Implement AcpiOsStall, AcpiOsSleep, AcpiOsGetTimer
- change AcpiOsRemoveInterruptHandler() to print a warning
  instead of panic.

- we do the same in AcpiOsInstallInterruptHandler().

Signed-off-by: Tomas Hruby <thruby@few.vu.nl>
2012-01-13 18:57:53 +00:00
Tomas Hruby
71533c8a83 ACPI - fixed initialization of pci briges irqtable
- if no IRQ table is found, we report that ACPI cannot map IRQ
  correctly

- fixes mapping of IRQs in KVM because in this case we just fall
  through and use the IRQ configured by BIOS. PCI still reports
  that it failed to use ACPI. It is a hint if things go wrong.
2011-12-20 13:10:36 +00:00
Tomas Hruby
b73089ce3e ACPI extended irq - fixed uninitialized variable 2011-12-20 13:08:45 +00:00
David van Moolenbroek
c6459e8ec1 acpi: resolve warnings 2011-12-10 16:14:23 +01:00
David van Moolenbroek
b4d909d415 Split block/character protocols and libdriver
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.

The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.

After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
  in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
  reintroduced

As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.

Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
2011-11-23 14:06:37 +01:00
Ben Gras
b1eba81b9d simplify build logic a bit
. always compile acpi, with clang, so never have
	  build/clean inconsistencies; can be enabled (i.e. run
	  at boot time) by setting acpi variable in the boot monitor
	. always strip binaries with the right strip cmd, so never
	  have ack/elf strip inconsistencies
2011-11-18 17:11:17 +01:00
Arun Thomas
b956c8735e Fix GCC image building 2011-07-09 15:04:42 +02:00
Tomas Hruby
40bfed28cd ACPI pci-to-pci bridges
- every pci device which implements _PRT acpi method is considered to
  be a pci-to-pci bridge

- acpi driver constructs a hierarchy of pci-to-pci bridges

- when pci driver identifies a pci-to-pci bridge it tells acpi driver
  what is the primary and the secondary bus for this device

- when pci requests IRQ routing information from acpi, it passes the
  bus number too to be able to identify the device accurately
2010-10-21 17:07:09 +00:00
Tomas Hruby
613ff40936 acpi driver Makefile fix
- by Antoine Leca
2010-10-15 22:20:01 +00:00
Tomas Hruby
b0572bfd1e No need to scan devices in PIC mode 2010-09-22 08:01:43 +00:00
Tomas Hruby
e6ebac015d APIC mode uses IO APICs
- kernel turns on IO APICs if no_apic is _not_ set or is equal 0

- pci driver must use the acpi driver to setup IRQ routing otherwise
  the system cannot work correctly except systems like KVM that use
  only legacy (E)ISA IRQs 0-15
2010-09-07 07:18:11 +00:00
Tomas Hruby
9560b6dea8 ACPI driver
- 99% of the code is Intel's ACPICA. The license is compliant with BSD
  and GNU and virtually all systems that use ACPI use this code, For
  instance it is part of the Linux kernel.

- The only minix specific files are

  acpi.c
  osminixxf.c
  platform/acminix.h

  and

  include/minix/acpi.h

- At the moment the driver does not register interrupt hooks which I
  believe is mainly for handling PnP, events like "battery level is
  low" and power management. Should not be difficult to add it if need
  be.

- The interface to the outside world is virtually non-existent except
  a trivial message based service for PCI driver to query which device
  is connected to what IRQ line. This will evolve as more components
  start using this driver. VM, Scheduler and IOMMU are the possible
  users right now.

- because of dependency on a native 64bit (long long, part of c99) it
  is compiled only with a gnu-like compilers which in case of Minix
  includes gcc llvm-gcc and clang
2010-09-02 15:44:04 +00:00