Commit graph

105 commits

Author SHA1 Message Date
Ben Gras
603ed23ebd at_wini: remove unnecessary quirks debug message 2010-04-28 14:19:40 +00:00
Ben Gras
b65ebdffac at_wini: more general system to allow devices that behave like ata controllers.
(let silicon image sata controller that is pci class 1, subclass 0x80,
but works as a sata controller, work as such.)
2010-04-28 11:52:28 +00:00
Cristiano Giuffrida
48c6bb79f4 Driver refactory for live update and crash recovery.
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.

VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.

INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.

DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS. 
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.

DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.

KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
2010-04-08 13:41:35 +00:00
Kees van Reeuwijk
0a04f49d2b Fixed some incorrect uses of printf-like functions. 2010-04-01 14:30:36 +00:00
Kees van Reeuwijk
c3f649557e Lots of const correctness, other cleanup. 2010-04-01 12:51:31 +00:00
Kees van Reeuwijk
4865e3f4f9 More use of endpoint_t. Other code cleanup. 2010-03-30 14:07:15 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Arun Thomas
2a8fabf4ad Include directory reorg and makefile updates.
-Convert the include directory over to using bsdmake
 syntax
-Update/add mkfiles
-Modify install(1) so that it can create symlinks
-Update makefiles to use new install(1) options
-Rename /usr/include/ibm to /usr/include/i386
-Create /usr/include/machine symlink to arch header files
-Move vm_i386.h to its new home in the /usr/include/i386
-Update source files to #include the header files at their
 new homes.
-Add new gnu-includes target for building GCC headers
2010-03-08 11:04:59 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Kees van Reeuwijk
851dc95566 Move cp_grant_id_t to a more central header file, and uses it more
extensively.
Fix casts that cast the grand id field of some messages to the wrong
type.
2010-03-04 16:15:26 +00:00
Kees van Reeuwijk
1597e701a0 Remove useless variables and the computations on them. 2010-02-19 10:00:32 +00:00
Ben Gras
f08f2bd88c new free_contig() and changes to make drivers use it; so now we
have malloc/free, alloc_contig/free_contig and mmap/munmap nicely
paired up.

memory uses malloc/free instead of mmap/munmap as it doesn't have
to be contiguous for the ramdisks (and it might help if it doesn't!).
2010-02-10 13:56:26 +00:00
Kees van Reeuwijk
064cb7583a Lots of small code cleanup: make symbols local, remove unused symbols,
fixed a typo, removed a now unused header file.
Use #include <..> for header files that represent libraries.
2010-02-09 15:23:38 +00:00
Kees van Reeuwijk
a7cee5bec4 Removed unused symbols.
Minor cleanups.
2010-01-22 22:01:08 +00:00
Kees van Reeuwijk
4faed703d9 Added a missing return statement in paired_grant().
Removed lots of unused variables.
2010-01-15 21:45:30 +00:00
Cristiano Giuffrida
d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
David van Moolenbroek
30a7fe5fa9 libdriver changes:
- remove obsolete non-safecopy support
- merge libdriver and libdriver_asyn
- change standard reply model from sendnb to senda
2009-12-02 09:57:48 +00:00
Ben Gras
5920582bde Don't check DMA_ST_ERROR before DMA_ST_INT is set (which is done too) 2009-10-22 14:31:29 +00:00
Ben Gras
96b608c3f2 throw out unnecessary drive1 thing 2009-10-19 15:45:43 +00:00
Ben Gras
6b01026668 newer at_wini.c (really incl atapi dma this time) 2009-10-19 15:45:14 +00:00
Ben Gras
0333f21d8e - reverse order of transfer command and DMA initiation - fixes DMA problem
that some hardware had
 - clear DMA_ST_INT after DMA - fixes infinite number of interrupts 
   that some hardware had
 - initial ATAPI DMA implementation, doesn't actually increase performance
   on my test hardware so possibly not right yet, disabled by default
2009-10-19 14:23:04 +00:00
Tomas Hruby
4dad30937b Removed macros that depend on NOTIFY_FROM from servers and drivers. They
determine the information defined by these macros from the m_source field of the
notify message.
2009-09-29 18:47:56 +00:00
Ben Gras
89bf7bae27 - tty: only report unrecognized scancodes once; forget about
remembering the origin and cursor position as that feature didn't
   really work properly anyway
 - tty: map in video and font memory using a vm call, access it from C,
   thereby eliminating pesky weird segment calls and assembly to access it,
   and unbreaks loadfont (Roman Ignatov)
 - bios_wini: fix bios_wini by allocating a <1MB buffers for it
 - memory: preallocate ramdisk, makes it a bit faster (and doesn't
   fail halfway if you allocate a huge one)
 - floppy: use <1MB buffer
 - ramdisk proto: because of the 2x1 page reservations, binaries
   got a little fatter and didn't fit on the ramdisk any more.
   increase it.
2009-09-21 14:25:54 +00:00
David van Moolenbroek
dcfaf50f79 wrong field index in at_wini env_parse call 2009-05-10 16:58:23 +00:00
David van Moolenbroek
e9e347f5b6 Fix for large transfer operations not advancing buffer address
offset when DMA transfer unit is smaller than given buffer size.
Bug tracker item #82.
2009-05-08 12:29:57 +00:00
Ben Gras
e5209d51f1 bad dma fallback to pio mode 2009-04-27 11:53:11 +00:00
Ben Gras
379be7f0fb A serial ata pci card we have. 2009-02-16 13:20:10 +00:00
Ben Gras
d0a2e6b2f4 use library panic, doesn't need its own any more. 2009-01-29 14:41:44 +00:00
Ben Gras
1d8aed840c . no more HZ, but use sys_hz() to get that value
. memory maps in physical memory (for /dev/mem) with new vm interface
 . pci complete_bars() seems to be buggy behaviour sometimes
 . startup script opens its own stdout, stderr and stdin so init doesn't
   have to do it
2008-12-11 14:42:23 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
Ben Gras
ad93329236 Assume bios parameters are wrong/missing if any of the parameters are 0. 2007-05-30 16:13:52 +00:00
Ben Gras
18e7b315a1 remove debug message 2007-04-05 13:58:35 +00:00
Ben Gras
8c9e1cf4c5 Uninitialized vector entry? 2007-02-23 20:58:10 +00:00
Ben Gras
bf08c90e74 Slew of debugging / sanity check features. 2007-02-23 18:21:19 +00:00
Ben Gras
3bb73b431b add/re-enable at_wini debug output 2007-02-21 17:49:35 +00:00
Ben Gras
f7992c94ec at_wini also needs a pci_reserve() for the pci compatability device, if
present, for dma.
2007-02-20 18:42:43 +00:00
Ben Gras
168d766f32 . pci driver now returns devices, even when they have been pci_reserve()d
. pci_reserve() returns an error on devices that have already been reserved,
  instead of panic()ing; the pci_reserve() library call still panics,
  pci_reserve_ok() returns an int.
. this allows at_wini to use the instance value as intended, as all devices
  are seen, even reserved ones
. only devices actually used by at_wini are pci_reserve()d
. pci doesn't release devices based on argv[0], as at_wini both have the
  same name and multiple instances won't work together properly
2007-02-20 17:09:19 +00:00
Ben Gras
49d2195722 made default wakeup time correct 2007-02-16 15:56:00 +00:00
Ben Gras
1ff8616378 set 'w_testing' during w_identify(). this means 0-tolerance to
timeouts, and an ATA_IDENTIFY timeout will cause the ATAPI_IDENTIFY
to be skipped, making the cd probe a lot faster.
2007-02-12 13:35:33 +00:00
Ben Gras
c6f8154df0 use shorter ata timeout for identify commands when running from cd
to shorten probe time.
2007-02-09 15:58:33 +00:00
Ben Gras
624f17ee04 Extend cdprobe probe list to c1, and reorder minors to do most-likely
first.

Make at_wini include instance number in error messages.
2007-02-08 15:56:58 +00:00
Ben Gras
ebde52a9bc supply instance to 2nd at_wini instance.
requires a little cooperation from at_wini.
2007-02-08 14:23:03 +00:00
Ben Gras
8ea438ae93 Retired DEV_{READ,WRITE,GATHER,SCATTER,IOCTL} (safe versions *_S are to
be used and drivers should never receieve these 'unsafe' variants
any more).
2007-02-07 16:22:19 +00:00
Ben Gras
b01aff70d2 use servers/inet/mq.[ch] to queue messages using mq_queue() in
libdriver.  at_wini now queues messages it can't handle it receives when
waiting for an interrupt. this way it can do receive(ANY) and timeouts
should be working again (were broken for VFS, as with the advent of VFS,
at_wini could get requests from a filesystem while it was waiting for an
interrupt - as a hack, the receive() was changed to receive(HARDWARE)).

Added mq.c to libdriver, and made libdriver an actual library that
drivers link with -L../libdriver -ldriver. (So adding files, if
necessary, is easier next time.)
2007-01-12 13:33:12 +00:00
Philip Homburg
bafc45a309 First cut at 64-bit file offsets in block devices for mkfs/fsck. 2006-11-27 14:21:43 +00:00
Philip Homburg
954ad990e5 at_wini now calls pci_reserve. 2006-11-01 14:55:00 +00:00
Ben Gras
fa0ba56bc9 Merge of VFS by Balasz Gerofi with Minix trunk. 2006-10-25 13:40:36 +00:00
Philip Homburg
3e35db1514 Also clear word 6 in the ATAPI SCSI_READ10 command packet (in atapi_transfer). 2006-08-28 15:10:10 +00:00
Philip Homburg
dcb7cae67c Changed to use sys_readbios to get BIOS parameters. 2006-07-10 12:34:41 +00:00