Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.
- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
invalidation; instead, make get_filp* fail all calls on invalidated
FDs except when obtained with the locktype VNODE_OPCL which is used
by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
the situation that a FD is in use if its slot points to a filp; use
FILP_CLOSED as single means of marking a filp as invalidated.
Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
- block the calling thread on character device close;
- fully separate block and character open/close routines;
- reuse generic open/close code for the cloning case;
- zero all messages to drivers before filling them;
- use appropriate types for major/minor device numbers.
Change-Id: Ia90e6fe5688f212f835c5ee1bfca831cb249cf51
I/O control requests now come with the endpoint of the user process
that initiated the ioctl(2) call. It is stored in a new BDEV_USER
field, which is an alias for BDEV_FLAGS. The contents of this field
are to be used only in highly specific situations. It should be
preserved (not replaced!) by services that forward IOCTL requests,
and may be set to NONE for service-initiated IOCTL requests.
Change-Id: I68a01b9ce43eca00e61b985a9cf87f55ba683de4
The original R_BIT and W_BIT definitions have nothing to do with the
way these bits are used. Their distinct usage is more apparent when
they have different names.
Change-Id: Ia984457f900078b2e3502ceed565fead4e5bb965
The main purpose of this patch is to fix handling of unpause calls
from PM while another call is ongoing. The solution to this problem
sparked a full revision of the threading model, consisting of a large
number of related changes:
- all active worker threads are now always associated with a process,
and every process has at most one active thread working for it;
- the process lock is always held by a process's worker thread;
- a process can now have both normal work and postponed PM work
associated to it;
- timer expiry and non-postponed PM work is done from the main thread;
- filp garbage collection is done from a thread associated with VFS;
- reboot calls from PM are now done from a thread associated with PM;
- the DS events handler is protected from starting multiple threads;
- support for a system worker thread has been removed;
- the deadlock recovery thread has been replaced by a parameter to the
worker_start() function; the number of worker threads has
consequently been increased by one;
- saving and restoring of global but per-thread variables is now
centralized in worker_suspend() and worker_resume(); err_code is now
saved and restored in all cases;
- the concept of jobs has been removed, and job_m_in now points to a
message stored in the worker thread structure instead;
- the PM lock has been removed;
- the separate exec lock has been replaced by a lock on the VM
process, which was already being locked for exec calls anyway;
- PM_UNPAUSE is now processed as a postponed PM request, from a thread
associated with the target process;
- the FP_DROP_WORK flag has been removed, since it is no longer more
than just an optimization and only applied to processes operating on
a pipe when getting killed;
- assignment to "fp" now takes place only when obtaining new work in
the main thread or a worker thread, when resuming execution of a
thread, and in the special case of exiting processes during reboot;
- there are no longer special cases where the yield() call is used to
force a thread to run.
Change-Id: I7a97b9b95c2450454a9b5318dfa0e6150d4e6858
Previously, processing of some replies coming from character drivers
could block on locks, and therefore, such processing was done from
threads that were associated to the character driver process. The
hidden consequence of this was that if all threads were in use, VFS
could drop replies coming from the driver. This patch returns VFS to
a situation where the replies from character drivers are processed
instantly from the main thread, by removing the situations that may
cause VFS to block while handling those replies.
- change the locking model for select, so that it will never block
on any processing that happens after the select call has been set
up, in particular processing of character driver select replies;
- clearly mark all select routines that may never block;
- protect against race conditions in do_select as result of the
locking that still does happen there (as is required for pipes);
- also handle select timers from the main thread;
- move processing of character driver replies into device.c.
Change-Id: I4dc8e69f265cbd178de0fbf321d35f58f067cc57
These days, DEV_OPEN calls to character drivers block the calling
thread until completion or failure, and thus never return SUSPEND to
the caller. The same already applied to BDEV_OPEN calls to block
drivers. It has thus become impossible for a process to enter a state
of being blocked on a device open call.
There is currently no support for restarting device open calls to
restarted character drivers. This support was present in the _DOPEN
logic, but was already no longer triggering. In the future, this case
should be handled by the thread performing the open request.
Change-Id: I6cc1e7b4c9ed116c6ce160b315e6e060124dce00
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.
Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
The async char protocol already has this, so this patch closes the
gap between the two protocols a bit. Support for this flag has been
added to all sync char drivers that support CANCEL at all.
The LOG driver was already using the asynchronous protocol, but it
did not support the nonblocking transfer flag. This has been fixed
as well.
Change-Id: Ia55432c9f102765b59ad3feb45a8bd47a782c93f
As with w_task, this ensures that the field remains cleared if it is
not used. Without this, worker_stop could mistakenly identify a thread
as talking to a device driver rather than a (crashed) file server.
Change-Id: I7d3ebed3efc3cd4f5c891f61c67a6463109b6376
It was always set, but not always cleared, when talking to asynchronous
drivers. This could cause erratic behavior upon a driver crash.
Normally, a worker thread's w_task field is set when it's about to
communicate with a driver or FS. Then upon receiving a reply we can
do sanity checks (that the thread we want to wake up was actually
waiting for a reply). Also, when a driver/FS crashes, we can identify
which worker threads were talking to the crashed endpoint and handle
the error gracefully.
Asynchronous drivers are a bit special, though. In most cases, the
sender of the request is not interested in the reply (the sender was
suspended and only wants to know whether the request was successfully
caried out or not). However, the open request is special, as the reply
carries information needed by the sender. This is the only request
where a worker thread actually yields and waits for the result. This is
also the only case where we're interested in setting w_task for
asynchronous drivers.
Change-Id: Ia1ce2747937df376122b5e13b6a069de27fcc379
m_out is shared between threads as the reply message, and it can happen
results get overwritten by another thread before the reply is sent. This
change
. makes m_out local to the message handling function,
declared on the stack of the caller
. forces callers of reply() to give it a message, or
declare the reply message has no significant fields except
for the return code by calling replycode()
Change-Id: Id06300083a63c72c00f34f86a5c7d96e4bbdf9f6
libchardriver does not support DEV_REOPEN and will return ERESTART
when you do try it. This made VFS unhappy and concluded erroneously
that the driver was EDEADEPT.
* Updating common/lib
* Updating lib/csu
* Updating lib/libc
* Updating libexec/ld.elf_so
* Corrected test on __minix in featuretest to actually follow the
meaning of the comment.
* Cleaned up _REENTRANT-related defintions.
* Disabled -D_REENTRANT for libfetch
* Removing some unneeded __NBSD_LIBC defines and tests
Change-Id: Ic1394baef74d11b9f86b312f5ff4bbc3cbf72ce2
By decoupling synchronous drivers from VFS, we are a big step closer to
supporting driver crashes under all circumstances. That is, VFS can't
become stuck on IPC with a synchronous driver (e.g., INET) and can
recover from crashing block drivers during open/close/ioctl or during
communication with an FS.
In order to maintain serialized communication with a synchronous driver,
the communication is wrapped by a mutex on a per driver basis (not major
numbers as there can be multiple majors with identical endpoints). Majors
that share a driver endpoint point to a single mutex object.
In order to support crashes from block drivers, the file reopen tactic
had to be changed; first reopen files associated with the crashed
driver, then send the new driver endpoint to FSes. This solves a
deadlock between the FS and the block driver;
- VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it
after retrying the current request to the newly started driver.
- The block driver would refuse the retried request until all files
had been reopened.
- VFS would reopen files only after getting a reply from the initial
REQ_NEW_DRIVER.
When a character special driver crashes, all associated files have to
be marked invalid and closed (or reopened if flagged as such). However,
they can only be closed if a thread holds exclusive access to it. To
obtain exclusive access, the worker thread (which handles the new driver
endpoint event from DS) schedules a new job to garbage collect invalid
files. This way, we can signal the worker thread that was talking to the
crashed driver and will release exclusive access to a file associated
with the crashed driver and prevent the garbage collecting worker thread
from dead locking on that file.
Also, when a character special driver crashes, RS will unmap the driver
and remap it upon restart. During unmapping, associated files are marked
invalid instead of waiting for an endpoint up event from DS, as that
event might come later than new read/write/select requests and thus
cause confusion in the freshly started driver.
When locking a filp, the usage counters are no longer checked. The usage
counter can legally go down to zero during filp invalidation while there
are locks pending.
DS events are handled by a separate worker thread instead of the main
thread as reopening files could lead to another crash and a stuck thread.
An additional worker thread is then necessary to unlock it.
Finally, with everything asynchronous a race condition in do_select
surfaced. A select entry was only marked in use after succesfully sending
initial select requests to drivers and having to wait. When multiple
select() calls were handled there was opportunity that these entries
were overwritten. This had as effect that some select results were
ignored (and select() remained blocking instead if returning) or do_select
tried to access filps that were not present (because thrown away by
secondary select()). This bug manifested itself with sendrecs, but was
very hard to reproduce. However, it became awfully easy to trigger with
asynsends only.
When VFS runs out of vnodes after closing a vnode in opcl, common_open
will try to unlock a vnode through unlock_filp that has already been
unlocked in clone_opcl. By first obtaining and locking a new vnode this
situation is prevented; if there are no free vnodes, common_open will
unlock a still locked vnode.
By making m_in job local (i.e., each job has its own copy of m_in instead
of refering to the global m_in) we don't have to store and restore m_in
on every thread yield. This reduces overhead. Moreover, remove the
assumption that m_in is preserved. Do_XXX functions have to copy the
system call parameters as soon as possible and only pass those copies to
other functions.
Furthermore, this patch cleans up some code and uses better types in a lot
of places.
- if an operation (R, W, IOCTL) is non blocking, a flag is set
and sent to the device.
- nothing changes for sync devices
- asyn devices should reply asap if an operation is non-blocking.
We must trust the devices, but we had to trust them anyway to
reply to CANCEL correctly
- we safe sending CANCEL commands to asyn devices. This greatly
simplifies the protocol. Asynchronous devices can always reply
when a reply is ready and do not need to deal with other
situations
- currently, none of our drivers use the flags since they drive
virtual devices which do not block
- Fix locking bug when unable to send DEV_SELECT request. Upon failure
VFS tried to cancel the select operation, but this failed due to trying
to lock a filp that was already locked to send the request in the first
place. Do_select_request now handles locking of filps itself instead of
relying on the caller to do it. This fixes a crash when killing INET.
- Fix failure to revive a process after a non-blocking select operation
yielded no ready select operations when replying DEV_SEL_REPL1.
- Improve readability by using OK, SUSPEND, and standard error values as
results instead of having separate macros in select.
- Don't print not having a driver for a major device; after killing a driver
select will trigger this printf.
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.
The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.
After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
reintroduced
As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.
Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
- Remove redundant code.
- Always wait for the initial reply from an asynchronous select request,
even if the select has been satisfied on another file descriptor or
was canceled due to a serious error.
- Restart asynchronous selects if upon reply from the driver turns out
that there are deferred operations (and do not forget we're still
interested in the results of the deferred operations).
- Do not hang a non-blocking select when another blocking select on
the same filp is still blocking.
- Split blocking operations in read, write, and exceptions (i.e.,
blocking on read does not imply the write will block as well).
- Some loops would iterate over OPEN_MAX file descriptors instead of
the "highest" file descriptor.
- Use proper internal error return values.
- A secondary reply from a synchronous driver is essentially the same
as from an asynchronous driver (the only difference being how the
answer is received). Merge.
- Return proper error code after a driver failure.
- Auto-detect whether a driver is synchronous or asynchronous.
- Remove some code duplication.
- Clean up code (coding style, add missing comments, put all select
related code together).
Before safecopies, the IO_ENDPT and DL_ENDPT message fields were needed
to know which actual process to copy data from/to, as that process may
not always be the caller. Now that we have full safecopy support, these
fields have become useless for that purpose: the owner of the grant is
*always* the caller. Allowing the caller to supply another endpoint is
in fact dangerous, because the callee may then end up using a grant
from a third party. One could call this a variant of the confused
deputy problem.
From now on, safecopy calls should always use the caller's endpoint as
grant owner. This fully obsoletes the DL_ENDPT field in the
inet/ethernet protocol. IO_ENDPT has other uses besides identifying the
grant owner though. This patch renames IO_ENDPT to USER_ENDPT, not only
because that is a more fitting name (it should never be used for I/O
after all), but also in order to intentionally break any old system
source code outside the base system. If this patch breaks your code,
fixing it is fairly simple:
- DL_ENDPT should be replaced with m_source;
- IO_ENDPT should be replaced with m_source when used for safecopies;
- IO_ENDPT should be replaced with USER_ENDPT for any other use, e.g.
when setting REP_ENDPT, matching requests in CANCEL calls, getting
DEV_SELECT flags, and retrieving of the real user process's endpoint
in DEV_OPEN.
The changes in this patch are binary backward compatible.
- on driver restarts, reopen devices on a per-file basis, not per-mount
- do not assume that there is just one vnode per block-special device
- update block-special files in the uncommon mounting success paths, too
- upon mount, sync but also invalidate affected buffers on the root FS
- upon unmount, check whether a vnode is in use before updating it
file descriptor passing, PFS does some back calls to VFS. For example, to
verify the validity of a path provided by a process and to tell VFS it must
copy file descriptors from one process to another.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET
INET CHANGES:
- INET announces its presence to VFS just like any other driver
RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.
VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.
INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.
DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS.
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.
DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.
KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
