Commit graph

327 commits

Author SHA1 Message Date
Cristiano Giuffrida
ef95bf1bb9 Print stacktrace when a system service fails or when a core dump has to be generated for a user process. 2010-03-22 22:46:29 +00:00
Arun Thomas
436d6012a3 Convert drivers/ and servers/ over to bsdmake
-Move libdriver to lib/
-Install all boot image services on filesystem to aid restartability
2010-03-22 21:25:22 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Thomas Veerman
bef0e3eb63 - Add support for the ucontext system calls (getcontext, setcontext,
swapcontext, and makecontext).
- Fix VM to not erroneously think the stack segment and data segment have
  collided when a user-space thread invokes brk().
- Add test51 to test ucontext functionality.
- Add man pages for ucontext system calls.
2010-03-12 15:58:41 +00:00
Arun Thomas
1f9ce647cf Move archtypes.h, fpu.h, and stackframe.h
Move archtypes.h to include/ dir, since several servers require it. Move
fpu.h and stackframe.h to arch-specific header directory. Make source
files and makefiles aware of the new header locations.
2010-03-09 09:41:14 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00
Arun Thomas
b706112487 Incorporate bsdmake into buildsystem and reorganize libs 2010-02-16 14:41:33 +00:00
David van Moolenbroek
c7f1b547cb Statistical profiling fixes:
- PM: get rid of umap warning
- sprofalyze.pl: update with recently added servers and drivers
- sprofalyze.pl: properly truncate process names for sample matching
2010-02-03 12:27:52 +00:00
Erik van der Kouwe
c107dbe1d0 Man-pages on mkdep, cdprobe, loadramdisk and newroot; thanks to Antoine Leca 2010-02-02 15:10:00 +00:00
Erik van der Kouwe
310876dcec Kill processes which ignore signals thatshould not be ignored 2010-01-31 19:13:20 +00:00
Kees van Reeuwijk
2ba237cd4e Fixed a number of uses of uninitialized variables by adding assertions
or other sanity checks, code reshuffling, or fixing broken behavior.
2010-01-27 10:23:58 +00:00
Cristiano Giuffrida
d1fd04e72a Initialization protocol for system services.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.

SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic 
registration / deregistration of system services.

VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.

RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
2010-01-08 01:20:42 +00:00
David van Moolenbroek
ac9ab099c8 General cleanup:
- clean up kernel section of minix/com.h somewhat
- remove ALLOCMEM and VM_ALLOCMEM calls
- remove non-safecopy and minix-vmd support from Inet
- remove SYS_VIRVCOPY and SYS_PHYSVCOPY calls
- remove obsolete segment encoding in SYS_SAFECOPY*
- remove DEVCTL call, svrctl(FSDEVUNMAP), map_driverX
- remove declarations of unimplemented svrctl requests
- remove everything related to swapping to disk
- remove floppysetup.sh
- remove traces of rescue device
- update DESCRIBE.sh with new devices
- some other small changes
2010-01-05 19:39:27 +00:00
David van Moolenbroek
0dcf5b7aa8 add ptrace(2) TO_NOEXEC flag 2010-01-05 09:30:28 +00:00
David van Moolenbroek
e423c86009 ptrace(2) modifications:
- add T_GETRANGE/T_SETRANGE to get/set ranges of values
- change EIO error code to EFAULT
- move common-I&D text-to-data translation to umap_local
2009-12-29 21:32:15 +00:00
Cristiano Giuffrida
1f5841c8ed Basic System Event Framework (SEF) with ping and live update.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
  1. SEF Ping. The event occurs every time RS sends a ping to figure out
  whether a system process is still alive. The default callback implementation
  provided by SEF is to notify RS back to let it know the process is alive
  and kicking.
  2. SEF Live update. The event occurs every time RS sends a prepare to update
  message to let a system process know an update is available and to prepare
  for it. The live update support is very basic for now. SEF only deals with
  verifying if the prepare state can be supported by the process, dumping the
  state for debugging purposes, and providing an event-driven programming
  model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
  * PM notify messages primarily used at shutdown.
  * SYSTEM notify messages primarily used for signals.
  * CLOCK notify messages used for system alarms.
  * Debug messages. IS could still be in charge of fkey handling but would
  forward the debug message to the target process (e.g. PM, if the user
  requested debug information about PM). SEF would then catch the message and
  do nothing unless the process has registered an appropriate callback to
  deal with the event. This simplifies the programming model to print debug
  information, avoids duplicating code, and reduces the effort to print
  debug information.

SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.

RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
  * When an update command is issued (via "service update *"), RS notifies the
  target system process to prepare for a specific update state.
  * If the process doesn't respond back in time, the update is aborted.
  * When the process responds back, RS kills it and marks it for refreshing.
  * The process is then automatically restarted as for a buggy process and can
  start running again.
  * Live update is currently prototyped as a controlled failure.
2009-12-21 14:12:21 +00:00
Thomas Veerman
958b25be50 - Introduce support for sticky bit.
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
  the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
  functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
  the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
  - Several path lookup bugs in MFS.
  - A link can be too big for the path buffer.
  - A mountpoint can become inaccessible when the creation of a new inode
    fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
  suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
  unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
  named pipes. However, named pipes still reside on the (M)FS, as they are part
  of the file system on disk. To make this work VFS now has a concept of
  'mapped' inodes, which causes read, write, truncate and stat requests to be
  redirected to the mapped FS, and all other requests to the original FS.
2009-12-20 20:27:14 +00:00
Cristiano Giuffrida
f4574783dc Rewrite of boot process
KERNEL CHANGES:
- The kernel only knows about privileges of kernel tasks and the root system
process (now RS).
- Kernel tasks and the root system process are the only processes that are made
schedulable by the kernel at startup. All the other processes in the boot image
don't get their privileges set at startup and are inhibited from running by the
RTS_NO_PRIV flag.
- Removed the assumption on the ordering of processes in the boot image table.
System processes can now appear in any order in the boot image table.
- Privilege ids can now be assigned both statically or dynamically. The kernel
assigns static privilege ids to kernel tasks and the root system process. Each
id is directly derived from the process number.
- User processes now all share the static privilege id of the root user
process (now INIT).
- sys_privctl split: we have more calls now to let RS set privileges for system
processes. SYS_PRIV_ALLOW / SYS_PRIV_DISALLOW are only used to flip the
RTS_NO_PRIV flag and allow / disallow a process from running. SYS_PRIV_SET_SYS /
SYS_PRIV_SET_USER are used to set privileges for a system / user process.
- boot image table flags split: PROC_FULLVM is the only flag that has been
moved out of the privilege flags and is still maintained in the boot image
table. All the other privilege flags are out of the kernel now.

RS CHANGES:
- RS is the only user-space process who gets to run right after in-kernel
startup.
- RS uses the boot image table from the kernel and three additional boot image
info table (priv table, sys table, dev table) to complete the initialization
of the system.
- RS checks that the entries in the priv table match the entries in the boot
image table to make sure that every process in the boot image gets schedulable.
- RS only uses static privilege ids to set privileges for system services in
the boot image.
- RS includes basic memory management support to allocate the boot image buffer
dynamically during initialization. The buffer shall contain the executable
image of all the system services we would like to restart after a crash.
- First step towards decoupling between resource provisioning and resource
requirements in RS: RS must know what resources it needs to restart a process
and what resources it has currently available. This is useful to tradeoff
reliability and resource consumption. When required resources are missing, the
process cannot be restarted. In that case, in the future, a system flag will
tell RS what to do. For example, if CORE_PROC is set, RS should trigger a
system-wide panic because the system can no longer function correctly without
a core system process.

PM CHANGES:
- The process tree built at initialization time is changed to have INIT as root
with pid 0, RS child of INIT and all the system services children of RS. This
is required to make RS in control of all the system services.
- PM no longer registers labels for system services in the boot image. This is
now part of RS's initialization process.
2009-12-11 00:08:19 +00:00
David van Moolenbroek
fce9fd4b4e Add 'getidle' CPU utilization measurement infrastructure 2009-12-02 11:52:26 +00:00
David van Moolenbroek
f197bcb435 Allow servers to run with fewer privileges:
- allow non-root processes to get their own endpoint
- make alloc_contig() call sys_umap() only when requested
2009-12-02 10:06:58 +00:00
David van Moolenbroek
45123f83d3 PM: remove 'boottime' global variable 2009-11-28 13:22:01 +00:00
David van Moolenbroek
2dc9e354f7 ugly double blank line, my fault 2009-11-16 18:22:28 +00:00
David van Moolenbroek
a07f8d7646 Fix ptrace bug when reattaching to a detached process 2009-11-09 08:12:25 +00:00
David van Moolenbroek
f89388c241 Kernel, servers: remove unused proto.h definitions 2009-10-31 14:11:50 +00:00
David van Moolenbroek
4c263d6002 PM: clean up endpoint info API/ABI 2009-10-31 14:09:28 +00:00
David van Moolenbroek
6c4197f77e PM, VFS: remove unused param.h definitions 2009-10-29 13:29:04 +00:00
David van Moolenbroek
66998b594f PM: remove unused core_name variable 2009-10-29 12:07:53 +00:00
Erik van der Kouwe
cb6dbfca2c Add lspci command and SI_PCI_INFO getsysinfo call 2009-10-09 10:48:46 +00:00
David van Moolenbroek
49808dcf77 PM delay call infrastructure improvements
- allow PM to tell sys_runctl() whether to use delay call feature
- only use this feature in PM for delivering signals - not for exits
- do better error checking in PM on sys_runctl() calls
- rename SIGKREADY to SIGNDELAY
2009-10-01 10:36:09 +00:00
David van Moolenbroek
b423d7b477 Merge of David's ptrace branch. Summary:
o Support for ptrace T_ATTACH/T_DETACH and T_SYSCALL
o PM signal handling logic should now work properly, even with debuggers
  being present
o Asynchronous PM/VFS protocol, full IPC support for senda(), and
  AMF_NOREPLY senda() flag

DETAILS

Process stop and delay call handling of PM:
o Added sys_runctl() kernel call with sys_stop() and sys_resume()
  aliases, for PM to stop and resume a process
o Added exception for sending/syscall-traced processes to sys_runctl(),
  and matching SIGKREADY pseudo-signal to PM
o Fixed PM signal logic to deal with requests from a process after
  stopping it (so-called "delay calls"), using the SIGKREADY facility
o Fixed various PM panics due to race conditions with delay calls versus
  VFS calls
o Removed special PRIO_STOP priority value
o Added SYS_LOCK RTS kernel flag, to stop an individual process from
  running while modifying its process structure

Signal and debugger handling in PM:
o Fixed debugger signals being dropped if a second signal arrives when
  the debugger has not retrieved the first one
o Fixed debugger signals being sent to the debugger more than once
o Fixed debugger signals unpausing process in VFS; removed PM_UNPAUSE_TR
  protocol message
o Detached debugger signals from general signal logic and from being
  blocked on VFS calls, meaning that even VFS can now be traced
o Fixed debugger being unable to receive more than one pending signal in
  one process stop
o Fixed signal delivery being delayed needlessly when multiple signals
  are pending
o Fixed wait test for tracer, which was returning for children that were
  not waited for
o Removed second parallel pending call from PM to VFS for any process
o Fixed process becoming runnable between exec() and debugger trap
o Added support for notifying the debugger before the parent when a
  debugged child exits
o Fixed debugger death causing child to remain stopped forever
o Fixed consistently incorrect use of _NSIG

Extensions to ptrace():
o Added T_ATTACH and T_DETACH ptrace request, to attach and detach a
  debugger to and from a process
o Added T_SYSCALL ptrace request, to trace system calls
o Added T_SETOPT ptrace request, to set trace options
o Added TO_TRACEFORK trace option, to attach automatically to children
  of a traced process
o Added TO_ALTEXEC trace option, to send SIGSTOP instead of SIGTRAP upon
  a successful exec() of the tracee
o Extended T_GETUSER ptrace support to allow retrieving a process's priv
  structure
o Removed T_STOP ptrace request again, as it does not help implementing
  debuggers properly
o Added MINIX3-specific ptrace test (test42)
o Added proper manual page for ptrace(2)

Asynchronous PM/VFS interface:
o Fixed asynchronous messages not being checked when receive() is called
  with an endpoint other than ANY
o Added AMF_NOREPLY senda() flag, preventing such messages from
  satisfying the receive part of a sendrec()
o Added asynsend3() that takes optional flags; asynsend() is now a
  #define passing in 0 as third parameter
o Made PM/VFS protocol asynchronous; reintroduced tell_fs()
o Made PM_BASE request/reply number range unique
o Hacked in a horrible temporary workaround into RS to deal with newly
  revealed RS-PM-VFS race condition triangle until VFS is asynchronous

System signal handling:
o Fixed shutdown logic of device drivers; removed old SIGKSTOP signal
o Removed is-superuser check from PM's do_procstat() (aka getsigset())
o Added sigset macros to allow system processes to deal with the full
  signal set, rather than just the POSIX subset

Miscellaneous PM fixes:
o Split do_getset into do_get and do_set, merging common code and making
  structure clearer
o Fixed setpriority() being able to put to sleep processes using an
  invalid parameter, or revive zombie processes
o Made find_proc() global; removed obsolete proc_from_pid()
o Cleanup here and there

Also included:
o Fixed false-positive boot order kernel warning
o Removed last traces of old NOTIFY_FROM code

THINGS OF POSSIBLE INTEREST

o It should now be possible to run PM at any priority, even lower than
  user processes
o No assumptions are made about communication speed between PM and VFS,
  although communication must be FIFO
o A debugger will now receive incoming debuggee signals at kill time
  only; the process may not yet be fully stopped
o A first step has been made towards making the SYSTEM task preemptible
2009-09-30 09:57:22 +00:00
Ben Gras
8d9aa1fe4f throw out exec debugging message. 2009-09-30 08:36:13 +00:00
Tomas Hruby
4dad30937b Removed macros that depend on NOTIFY_FROM from servers and drivers. They
determine the information defined by these macros from the m_source field of the
notify message.
2009-09-29 18:47:56 +00:00
Ben Gras
32fa22fc2d RS_LOOKUP feature for libc functions that want to access servers.
let ipc talk to all USER processes and vice versa.

pm sig wrapper notify has to be called from two files.

actually install include files.
2009-09-21 15:25:15 +00:00
Ben Gras
5f497bcf22 - Introduce some macros for field names, so that endpt, pendpt,
addr and taddr don't have to be defined any more, so that <sys/mman.h>
    can be included for proper prototypes of munmap() and friends.
  - rename our GETPID to MINIX_GETPID to avoid a name conflict with
    other sources
  - PM needs its own munmap() and munmap_text() to avoid sending messages
    to VM at the startup phase. It *does* want to do that, but only
    after initialising. So they're called again with unmap_ok set to 1
    later.
  - getnuid(), getngid() implementation
2009-09-21 14:48:19 +00:00
Erik van der Kouwe
3615d93383 Handle SIGSTOP more consistently and according to POSIX rules; it can no longer be ignored 2009-09-13 12:24:23 +00:00
David van Moolenbroek
ba83b7663d PM: some tiny fixes 2009-09-12 18:36:07 +00:00
David van Moolenbroek
18ae423990 it's/its 2009-09-06 17:13:08 +00:00
David van Moolenbroek
769a0cdb35 PM: make SIGBUS, but not SIGUSR1 or SIGUSR2, cause a core dump 2009-08-15 23:23:24 +00:00
David van Moolenbroek
323f0abdd6 Support for setitimer(ITIMER_VIRTUAL/ITIMER_PROF). New test (41) for setitimer. 2009-08-15 21:37:26 +00:00
David van Moolenbroek
d82e260a90 Support for setitimer(ITIMER_REAL). 2009-08-15 16:09:32 +00:00
David van Moolenbroek
9e075d8623 PM cleanup: remove unused fields from mproc structure 2009-07-11 17:15:33 +00:00
David van Moolenbroek
1a9e07b0e5 PM: fix ptrace(T_EXIT) 'exit_proc: not idle' race condition. 2009-07-11 13:22:56 +00:00
David van Moolenbroek
14f3a0e018 PM: add clarifying comment about exiting system processes early (thanks Philip) 2009-07-11 11:19:39 +00:00
David van Moolenbroek
73c5bbf1a3 PM: add EXITING process flag as stopgap between starting coredump and setting ZOMBIE flag 2009-07-09 22:33:56 +00:00
David van Moolenbroek
693a6652ca PM cleanup: remove obsolete HAS_DMA flag 2009-07-08 20:08:46 +00:00
David van Moolenbroek
67d986f882 PM cleanup: merge exit and coredump paths 2009-07-08 17:16:53 +00:00
David van Moolenbroek
12451e6b06 Miscellaneous PM fixes:
o Don't call vm_willexit() more than once upon normal process exit
o Correct two cases of indenting of the no-discussion-possible kind
o Perform slightly stricter ptrace(2) checks:
  - process calling ptrace must be target process's parent
  - process must call wait/waitpid before using ptrace on stopped child
  - no ptrace on zombies
o Allow user processes to use ptrace(T_STOP) to stop an active child
2009-07-05 22:48:18 +00:00
Arun Thomas
3b37103fa3 Make the rtl8139 and orinoco drivers handle the system shutdown case
like other drivers. Also, some minor cleanups.
2009-04-22 12:42:37 +00:00
Ben Gras
e0f3a5acf1 - enable ipc warnings by default
- ipc checking code in kernel didn't properly catch the
   sendrec() to self case; added special case check
 - triggered by PM using stock panic() - needs its own _exit()

reported by Joren l'Ami.
2009-04-17 13:46:37 +00:00
Ben Gras
733d6c1ef6 help debugging cause of these sometimes odd calls. 2009-02-17 12:09:59 +00:00
Ben Gras
3cc092ff06 . new kernel call sysctl for generic unprivileged system operations;
now used for printing diagnostic messages through the kernel message
   buffer. this lets processes print diagnostics without sending messages
   to tty and log directly, simplifying the message protocol a lot and
   reducing difficulties with deadlocks and other situations in which
   diagnostics are blackholed (e.g. grants don't work). this makes
   DIAGNOSTICS(_S), ASYN_DIAGNOSTICS and DIAG_REPL obsolete, although tty
   and log still accept the codes for 'old' binaries. This also simplifies
   diagnostics in several servers and drivers - only tty needs its own
   kputc() now.
 . simplifications in vfs, and some effort to get the vnode references
   right (consistent) even during shutdown. m_mounted_on is now NULL
   for root filesystems (!) (the original and new root), a less awkward
   special case than 'm_mounted_on == m_root_node'. root now has exactly
   one reference, to root, if no files are open, just like all other
   filesystems. m_driver_e is unused.
2009-01-26 17:43:59 +00:00
Ben Gras
2024bf0bcf . no more HZ
. let user processes query HZ
 . no more custom panic()
2008-12-11 14:49:17 +00:00
Ben Gras
9b33056d2b make allocmem accept and return values in bytes, ramdisk expects this. 2008-11-19 15:40:17 +00:00
Ben Gras
7b3d952a77 lingering file 2008-11-19 12:38:31 +00:00
Ben Gras
c078ec0331 Basic VM and other minor improvements.
Not complete, probably not fully debugged or optimized.
2008-11-19 12:26:10 +00:00
David van Moolenbroek
f73b541952 Backport of fix from asynchvfs branch for PM-LOG-VFS-PM deadlock that resulted in VFS panics. 2008-06-24 13:53:03 +00:00
Philip Homburg
1cffa69d2c Support for I/O MMU: do not re-use a memory segment until the I/O MMU has
removed it from its map.
2008-02-21 16:33:34 +00:00
Philip Homburg
9c3f85d14f Better interface for sys_times. 2007-08-16 13:16:26 +00:00
Philip Homburg
a81e82b3da Tell the kernel about the new boottime and don't tell VFS.
Tell DS about all processes in the boot image. PM_STIME is removed.
Diagnostic for calls to do_getprocnr (DS should be used to get endpoints).
2007-08-07 12:28:42 +00:00
Philip Homburg
69ca935251 getpeuid implementation. Get the uid of a process (by endpoint) 2007-04-27 12:21:06 +00:00
Philip Homburg
77f5b40141 Round memory size up for VM. 2007-04-23 14:38:55 +00:00
Ben Gras
dc67b37a10 more removing of warning and debug messages. 2007-04-13 14:00:31 +00:00
Ben Gras
448376ee7e . use library function to parse memory string
. remove unused variables and some other gcc warnings
2007-02-16 15:55:20 +00:00
Ben Gras
9f2f3dd488 don't call mkdep with an absolute path 2007-02-08 16:26:20 +00:00
Ben Gras
6f77685609 Split of architecture-dependent and -independent functions for i386,
mainly in the kernel and headers. This split based on work by
Ingmar Alting <iaalting@cs.vu.nl> done for his Minix PowerPC architecture
port.

 . kernel does not program the interrupt controller directly, do any
   other architecture-dependent operations, or contain assembly any more,
   but uses architecture-dependent functions in arch/$(ARCH)/.
 . architecture-dependent constants and types defined in arch/$(ARCH)/include.
 . <ibm/portio.h> moved to <minix/portio.h>, as they have become, for now,
   architecture-independent functions.
 . int86, sdevio, readbios, and iopenable are now i386-specific kernel calls
   and live in arch/i386/do_* now.
 . i386 arch now supports even less 86 code; e.g. mpx86.s and klib86.s have
   gone, and 'machine.protected' is gone (and always taken to be 1 in i386).
   If 86 support is to return, it should be a new architecture.
 . prototypes for the architecture-dependent functions defined in
   kernel/arch/$(ARCH)/*.c but used in kernel/ are in kernel/proto.h
 . /etc/make.conf included in makefiles and shell scripts that need to
   know the building architecture; it defines ARCH=<arch>, currently only
   i386.
 . some basic per-architecture build support outside of the kernel (lib)
 . in clock.c, only dequeue a process if it was ready
 . fixes for new include files

files deleted:
 . mpx/klib.s - only for choosing between mpx/klib86 and -386
 . klib86.s - only for 86

i386-specific files files moved (or arch-dependent stuff moved) to arch/i386/:
 . mpx386.s (entry point)
 . klib386.s
 . sconst.h
 . exception.c
 . protect.c
 . protect.h
 . i8269.c
2006-12-22 15:22:27 +00:00
Philip Homburg
ca448f0b0f Getdents implementation in library/vfs/mfs.
Changed readdir, etc. to use getdents
2006-11-09 16:22:54 +00:00
Ben Gras
7195fe3325 System statistical and call profiling
support by Rogier Meurs <rogier@meurs.org>.
2006-10-30 15:53:38 +00:00
Ben Gras
1e656b349d . processes stay ZOMBIE, even after wait(), to avoid wrongly seeing them
as living processes  before they are cleaned up (fixes
  wait()/waitpid() hanging forever on previously-ZOMBIE processes)

. stop processes from running using sys_nice() with PRIO_STOP
  when a handled signal is delivered, before computing 
  stack locations for sys_sigsend(). (fixes race condition
  when runnable processes get signals, and e.g. get scheduled
  before FS sends a reply to unpause(), which can make the
  signal stack location wrong.)
2006-10-25 11:29:43 +00:00
Philip Homburg
1ce2f75627 Additional ptrace commands for fault injection. 2006-10-20 14:14:08 +00:00
Ben Gras
18327f02a8 Introduced unprivileged getsysinfo variant, to retrieve harmless data
in formats that don't change (or is upwards compatible).
2006-07-27 16:23:01 +00:00
Philip Homburg
baa3ac5853 Fix for 'cleanup: not idle: 2313' bug. 2006-07-25 14:13:09 +00:00
Philip Homburg
7ce17fe655 Support for SI_CALL_STATS (counting systemcalls). 2006-07-10 12:44:43 +00:00
Ben Gras
b654c02f55 Give pm its own brk() so malloc() works in pm. pm needs more stack for this. 2006-06-30 14:36:11 +00:00
Ben Gras
b5179d7025 Split do_brk in a stub and a function that does the real work, so that
the real work can be called from elsewhere too. Specifically, to allow PM
its own brk().
2006-06-30 14:35:38 +00:00
Ben Gras
705f1039d9 order changed for printf() 2006-06-20 10:47:25 +00:00
Ben Gras
54f1e6d3d4 Use endpoint_t 2006-06-20 10:04:33 +00:00
Philip Homburg
e9aabcf2f8 Disabled building rescue driver (no longer needed). Moved allocmem from
library to the memory driver. Always put output from within TTY directly on
the console. Removed second include of driver.h from tty.c. Made tty_inrepcode
bigger. First step to move PM and FS calls that are not regular (API)
system calls out of callnr.h (renumbered them, and removed them from the
table.c files). Imported the Minix-vmd uname implementation. This provides
a more stable ABI than the current implementation. Added a bit of security
checking. Unfortunately not nearly enough to get a secure system. Fixed a
bug related to the sizes of the programs in the image (in PM patch_mem_chunks).
2006-05-19 12:19:37 +00:00
Philip Homburg
c9ff3994f1 Unpause requests (to FS) can be generated in parallel to other requests. 2006-05-15 12:06:19 +00:00
Philip Homburg
773844a816 New interface between PM and FS. 2006-05-11 14:57:23 +00:00
Ben Gras
461a4fafb1 Added fchmod() and fchown() 2006-04-18 11:26:04 +00:00
Ben Gras
52cd12195e Typo 2006-03-28 10:09:43 +00:00
Ben Gras
eae250dea4 . load average calculation changed to calculate it all over every tick
instead of keeping a running total of enqueued processes
   (because somehow the load average was broken)
 . added SI_KPROC_TAB to get a copy of kernel process table from PM, for
   a top implementation
 . fixed arg to sys_nice() to make it an endpoint, not a slot number
2006-03-16 09:33:35 +00:00
Ben Gras
557d865b35 Removed some debug prints 2006-03-15 15:16:16 +00:00
Philip Homburg
454dc8a180 Disabled special processing of KILL signals that are passed to pm by the kernel 2006-03-15 11:35:53 +00:00
Philip Homburg
57ed4b2bf7 Pass endpoint to sys_trace instead of slot number. 2006-03-15 11:32:00 +00:00
Ben Gras
1a7f7d6333 at_wini: removed RO_BIT misfeature, not used any more
pm: fixed rebooting by making a copy of the monitor code from the user
    process. this is necessary because that process is dead by the time
    sys_abort() is called.

    also added more info to the "can't reply" panic.
2006-03-13 13:21:13 +00:00
Ben Gras
cd8905f906 Don't need this change with new reboot 2006-03-13 10:36:52 +00:00
Ben Gras
9b1d4ef233 special case when exiting FS - don't core dump and don't tell FS about it
Because if FS is hanging in a signal, the exit won't work.
This way FS gets exited on e.g. SIGSEGV.
2006-03-10 17:35:55 +00:00
Ben Gras
c236121692 Let reboot work again by making PM check for RBT_REBOOT 2006-03-10 16:50:27 +00:00
Jorrit Herder
021e3234d8 Jorrit's ... "progress?" 2006-03-10 16:10:05 +00:00
Ben Gras
925dd3321f Don't blindly skip 0-group processes in signals 2006-03-08 14:46:42 +00:00
Ben Gras
b31d93aaa4 Comment fixes mailed to bugs@ 2006-03-04 22:51:52 +00:00
Ben Gras
b103bf5dc7 Fix of endpointless slot message in FS
Removed some leftover '#if 0'ed debug code in PM
2006-03-03 10:25:28 +00:00
Ben Gras
7967177710 endpoint-aware conversion of servers.
'who', indicating caller number in pm and fs and some other servers, has
been removed in favour of 'who_e' (endpoint) and 'who_p' (proc nr.).

In both PM and FS, isokendpt() convert endpoints to process slot
numbers, returning OK if it was a valid and consistent endpoint number.
okendpt() does the same but panic()s if it doesn't succeed. (In PM,
this is pm_isok..)

pm and fs keep their own records of process endpoints in their proc tables,
which are needed to make kernel calls about those processes.

message field names have changed.

fs drivers are endpoints.

fs now doesn't try to get out of driver deadlock, as the protocol isn't
supposed to let that happen any more. (A warning is printed if ELOCKED
is detected though.)

fproc[].fp_task (indicating which driver the process is suspended on)
became an int.

PM and FS now get endpoint numbers of initial boot processes from the
kernel. These happen to be the same as the old proc numbers, to let
user processes reach them with the old numbers, but FS and PM don't know
that. All new processes after INIT, even after the generation number
wraps around, get endpoint numbers with generation 1 and higher, so
the first instances of the boot processes are the only processes ever
to have endpoint numbers in the old proc number range.

More return code checks of sys_* functions have been added.

IS has become endpoint-aware. Ditched the 'text' and 'data' fields
in the kernel dump (which show locations, not sizes, so aren't terribly
useful) in favour of the endpoint number. Proc number is still visible.

Some other dumps (e.g. dmap, rs) show endpoint numbers now too which got
the formatting changed.

PM reading segments using rw_seg() has changed - it uses other fields
in the message now instead of encoding the segment and process number and
fd in the fd field. For that it uses _read_pm() and _write_pm() which to
_taskcall()s directly in pm/misc.c.

PM now sys_exit()s itself on panic(), instead of sys_abort().

RS also talks in endpoints instead of process numbers.
2006-03-03 10:20:58 +00:00
Ben Gras
040cebcefe Don't kill processes by signals in process group 0, and do a sync before
killing all processes in FS reboot.
2006-02-03 15:21:00 +00:00
Ben Gras
bcb67841a5 Give init process group 1. 2006-02-03 14:54:20 +00:00
Philip Homburg
8aa8552e95 Added SIGCONT to the list of signal that are to be ignored by default. 2006-01-30 16:27:49 +00:00
Ben Gras
50b06261b6 Implementation of truncate(), ftruncate() and the F_FREESP fcntl().
Implemented by changing write_map to accept a WMAP_FREE flag. In that
case, it doesn't update the datablock (creating indirect zones as
necessary) pointer, but it frees the datablock if present. Also it
frees the single and double indirect blocks if unused.

This makes the implementation of truncate_inode() simpler.
truncate_inode() now accepts a truncation length which makes
implementing truncate() and ftruncate() simple.

This also allowed implementing the F_FREESP fcntl().
2006-01-11 17:14:51 +00:00
Ben Gras
6a911b5284 Merge of minix-vmd symlink code.
. new_node() now returns inode of parent dir as argument that
	  has to be put_node()d again by the caller of new_node().
	  it can also return the name of the last component as last_dir()
	  did.
	. advance() takes a pointer to a pointer of an inode as the
	  parent now. This parent can change, in which case the old
	  one is put_node()d and a new one is put there.
	. eat_path() replaced by more flexible parse_path()
	. last_dir() replaced by call to parse_path().
	. do_slink(), do_readlink(), do_lstat() and slink_traverse() added.

Also added some truncate()/ftruncate()-introduction related changes.
(e.g. renamed truncate() to truncate_inode().)
2005-12-20 14:23:44 +00:00
Ben Gras
f6e5052597 seteuid() and setegid() 2005-12-13 09:48:29 +00:00
Ben Gras
2f23951221 SIGSTOP can't be masked (report by Jaap Weel). 2005-12-12 13:11:22 +00:00
Ben Gras
87f2236ad2 load average measurement implementation, accessable through
getloadavg() system call in the library.
2005-11-14 15:50:46 +00:00
Ben Gras
7104974cb5 Optionalize memory and vm verbose prints 2005-10-21 19:37:31 +00:00
Ben Gras
629453fba8 Added explanation of SIGKILL, REBOOT order. 2005-10-21 11:10:16 +00:00
Ben Gras
5333d4f4e4 . don't kill tty, send it messages on signals
. kill processes first, then tell fs to reboot (otherwise fs will have
  exited its processes and be confused when they exit again)
2005-10-21 11:07:33 +00:00
Ben Gras
4bae163d37 High watermark memory usage feature 2005-10-18 17:21:11 +00:00
Ben Gras
b1ca4d2d42 Check for ZOMBIE flag with findproc 2005-10-17 13:20:07 +00:00
Ben Gras
abd0b53e0a PM: added possibility to copy hole list from alloc.c to outside, for
misc.c to copy it away by getsysinfo
IS: prints out hole list + stats such as largest contiguous chunk
2005-10-13 12:48:43 +00:00
Jorrit Herder
5a9dec8bd2 New signal handling behaviour at PM (services can be killed).
New Shift-F6 dump for RS server at IS.
New getnpid, getnproc, getpproc library calls at PM.
New reincarnation server (basic functionality is there now).
2005-10-12 15:07:38 +00:00
Ben Gras
8c4166ee85 Add SIGWINCH signal and functionality in tty and support in PM. 2005-10-03 12:03:57 +00:00
Philip Homburg
42e1dad99c Hack to provide kernel with space for page table. 2005-09-30 12:56:00 +00:00
Ben Gras
231488dd1c Al's patch 2005-09-23 20:46:17 +00:00
Ben Gras
42fbd9aced Andy's formatting changes. 2005-09-11 16:45:46 +00:00
Ben Gras
c1de7758b7 Jorrit's fixes after reviewing Al's PM chapter 2005-09-01 10:16:07 +00:00
Ben Gras
911ff6a873 Formatting fixes for the book 2005-08-29 16:47:18 +00:00
Jorrit Herder
46c8884e36 Cleanup with gcc. Removed unused variables.
Fixed some uninitialized problems.
2005-08-25 12:05:09 +00:00
Jorrit Herder
7bf400a709 *** empty log message *** 2005-08-23 11:31:32 +00:00
Ben Gras
d11b2e4b8c Al's double-blank-line removal request 2005-08-22 15:23:47 +00:00
Jorrit Herder
872687ddfc Scheduling updates to the kernel. Sched() function now is single point for
policy. Actual policy not yet implemented.

PM calculates nice values for processes in boot image.

IS debug dumps improved (Shift+F1-F4).
2005-08-22 15:14:11 +00:00
Ben Gras
f4402bd129 Al's patch of fri 19 aug 2005 2005-08-22 12:54:11 +00:00
Ben Gras
b4d4450d2d Al's patch sent mon 15 aug. 2005-08-16 11:37:33 +00:00
Jorrit Herder
79ade04187 Put boot device memory initialization with #ifdef ENABLE_BOOTDEV ... #endif 2005-08-10 09:45:49 +00:00
Jorrit Herder
ab732a37e8 Renamed mm_exit to pm_exit (requested by Al)
Small cleanup in pm_init.
2005-08-10 09:37:54 +00:00
Ben Gras
5d2588aedf Al's patch sent Fri aug 5 2005-08-05 16:56:02 +00:00
Jorrit Herder
e396496d8c Fixed small bug in alarm code.
Kernel timer count was not reset after expiry.
2005-08-05 16:46:27 +00:00
Ben Gras
abb7157175 Merged do_gettimeofday with do_time to save one function call;
adjusted table.c accordingly
2005-08-05 12:44:06 +00:00
Jorrit Herder
7e74927cdc Cleanup of PM. 2005-08-05 10:45:54 +00:00
Jorrit Herder
8d66f755c3 Fixed type.
Added patch from Al Woodhull.
2005-08-04 22:01:50 +00:00
Jorrit Herder
74711a3b14 Check if kernel calls is allowed (from process' call mask) added. Not yet
enforced. If a call is denied, this will be kprinted. Please report any such
errors, so that I can adjust the mask before returning errors instead of
warnings.

Wrote CMOS driver. All CMOS code from FS has been removed. Currently the
driver only supports get time calls. Set time is left out as an exercise
for the book readers ... startup scripts were updated because the CMOS driver
is needed early on. (IS got same treatment.) Don't forget to run MAKEDEV cmos
in /dev/, otherwise the driver cannot be loaded.
2005-08-04 19:23:03 +00:00
Jorrit Herder
3f28baac83 Disabled comments from FXP driver with #define VERBOSE 0.
Fixed all troubles reported at shutdown.
No more illegal FS calls by dead processes.
2005-08-03 16:58:22 +00:00
Jorrit Herder
89cf745fe2 Single boot driver loaded, while multiple can be included in the boot image.
The user needs to set label=... to choose the driver of his or her choice.
This driver will be mapped onto the controller that is set in controller=...

Minor cleanup of kernel source code (boot image table now is static).
2005-08-03 16:06:35 +00:00
Jorrit Herder
1ae4d41d0d Without /dev/boot ... 2005-08-03 14:17:28 +00:00
Jorrit Herder
b69ca94efb Fixed 'bug' in log driver that caused kernel messages not to be displayed.
This was caused by a change in the shared driver code. Not log's fault.

Renamed #definitions of driver process numbers, e.g., TTY now is TTY_PROC_NR.
All known (special) processes now have consistent naming scheme. Kernel tasks
don't follow this scheme.
2005-08-03 08:14:08 +00:00
Jorrit Herder
0bd61375ad Miscellaneous small fixes to prettify startup output. 2005-08-02 15:56:24 +00:00
Jorrit Herder
f44725b777 Created new devctl system call to FS. Moved dmap.h header to include/minix/.
Various updates to support dynamically starting servers and suppress output.
2005-08-02 15:29:17 +00:00
Jorrit Herder
d3874a7917 Updated servers according to syslib interface changes. 2005-07-29 15:00:49 +00:00
Philip Homburg
3aadb79b1b 3 -> T_GETUSER 2005-07-27 12:03:09 +00:00
Jorrit Herder
3d0b9140f2 Updated F4 dump at IS to include send masks.
Removed unused constant from fproc.h
Changed signal behaviour at PM (work in progress)
2005-07-26 12:49:35 +00:00
Ben Gras
ca80161f40 . Junk-filling gap+stack code on exec() if enabled (not enabled now)
. Allow 'boot monitor' variable changes and additions by svrctl call
2005-07-22 18:29:58 +00:00
Jorrit Herder
f1153541c7 Fixed bug in PM that caused update program not to be scheduled, so that
sync was not periodically run. Chain of timers was accidentially broken.

Kernel sends SIGKSTOP signal on shutdown. FS calls sync to clean up.
2005-07-20 15:27:42 +00:00
Jorrit Herder
5594b767c0 Renamed src/lib/utils to src/lib/sysutil --- because of new src/lib/util 2005-07-19 13:21:51 +00:00
Jorrit Herder
f2e16763e7 Removed PM signon for INET. Now daemonized in /usr/etc/rc.
SIGTRAP generated in PM (where it belongs / no longer in kernel).
Updated Makefiles: servers are now installed in /usr/sbin.
2005-07-19 12:11:11 +00:00
Jorrit Herder
eba45510a9 New alarm(2) timers mechanism.
Kernel no longer keeps track of user alarms on behalf of the PM.
Instead, the PM maintains its own list of watchdog timers, and
uses one synchronous alarm (at the kernel) to get notifications
for expired user timers.
2005-07-14 15:30:12 +00:00
Jorrit Herder
570eac1f53 Renamed system library functionality.
Updated debug dumps of IS server.
2005-07-14 15:16:12 +00:00
Ben Gras
f0817fbd4c complete, tick-resolution gettimeofday() implementation 2005-07-06 07:08:36 +00:00
Ben Gras
904cf1f84d A "fix" for bug no. 2 is to check if the process slot has disappeared.
Not a really good solution (as it might not catch situations in which this
is caused by another bug), but the forrest of checks necessary might be worse
than this quick fix - because when looking for the cause, I found some other
cases in which the PM would panic as well. See info in bug 2 for details.

Another fix is to delay notification of PM by SYSTASK of signals delivered
internally until after the reply (e.g. of exec()), because the reply would
be messed up otherwise (receiving the notify instead of reply). This caused
SIGTRAP not to be delivered properly with traced processes.
2005-07-04 15:20:46 +00:00
Ben Gras
08f67dcef7 . Added printing of ppid to PM dump output
. made PM pid 0, own parent (so ppid 0) instead of -1
2005-07-04 09:36:16 +00:00
Ben Gras
9cf24c3233 Calls and functionality for get/setpriority() and fsync(). 2005-07-01 17:58:29 +00:00
Philip Homburg
3e5276eff7 changed max pid back to 30000 2005-06-30 12:56:34 +00:00
Ben Gras
af27dc0cf7 Added fchdir() system call, with corresponding manpage, Changelog and
system include modifications.
2005-06-29 19:28:26 +00:00
Jorrit Herder
b25146d3de Removed SM server. 2005-06-27 08:11:46 +00:00
Jorrit Herder
042c4ac395 Changed Makefiles for mkdep script.
Updated debugging dumps at IS server, and function key control.

NOTE: pm modified with DEBUG() output, to be removed later.
2005-06-24 16:21:21 +00:00
Ben Gras
c9c6983cc1 Fixed a few quirks in misc.c
. MAX used where it should've been MIN
  . buffer byte too short
  . inobvious use of & with && without parantheses
  . funny length checking
2005-06-20 09:35:23 +00:00
Ben Gras
45ddea1cdd Fixed bug that caused the PM to brutalize the contents of the 'memory'
variable. Parsing worked, but future requests for the variable (such as
by the sysenv command) returned truncated data. This caused the system
(e.g. setup script) to think the amount of memory was tiny, and caused
the enabling of swapspace, while it is unnecessary.
2005-06-19 23:16:08 +00:00
Jorrit Herder
92f9bd02f8 Parsing of free memory chunks is now done at the process manager. 2005-06-17 09:10:30 +00:00
Jorrit Herder
c2cd510adf Removed debug dumps from the PM and FS servers. The dumps are now done by the
IS servers, which obtains a copy of the data through the getsysinfo() system
call. CTRL-F1 now is a special TTY key to shows function key mappings.
2005-06-07 14:43:35 +00:00
Jorrit Herder
2f74381dcc Fixed 'ps' utility: now get process table addresses with getsysinfo() calls.
To be done: get copies of process tables instead of using /dev/(k)mem.
2005-06-06 13:51:50 +00:00
Ben Gras
e44e9ad261 small compile fixes; initial select() stubs; release.sh script doesn't
need /tmp any more since 16MB root device; increase to 3.0.5 to make new
CD with working FXP driver. (not tagged 3.0.5 yet as at driver bios-copy
workaround hasn't been done.)
2005-06-06 11:40:32 +00:00
Jorrit Herder
c281867f46 Fixed bug relating to FS and MEMORY during startup;
Relocated some syslib functions to utils library;
Changed location of 'Multiuser startup ..." echo in /etc/rc
2005-06-06 09:30:44 +00:00
Jorrit Herder
f2a85e58d9 Various updates.
* Removed some variants of the SYS_GETINFO calls from the kernel;
  replaced them with new PM and utils libary functionality. Fixed
  bugs in utils library that used old get_kenv() variant.
* Implemented a buffer in the kernel to gather random data.
  Memory driver periodically checks this for /dev/random.
  A better random algorithm can now be implemented in the driver.
  Removed SYS_RANDOM; the SYS_GETINFO call is used instead.
* Remove SYS_KMALLOC from the kernel. Memory allocation can now
  be done at the process manager with new 'other' library functions.
2005-06-03 13:55:06 +00:00
Jorrit Herder
e782e76944 Created new findproc system call to the PM (to replace similar kernel
functionality). Currently working on memory allocation (not yet finished).
2005-06-02 12:43:21 +00:00
Jorrit Herder
f926f1209d Minor commit to remove conflict with update. 2005-06-01 14:34:59 +00:00
Jorrit Herder
6d23f072f3 Cleaned up src/lib/utils library. Renamed server_ functions to more logical
names. All system processes can now either use panic() or report() from
libutils, or redefine their own function. Assertions are done via the standard
<assert.h> functionality.
2005-06-01 14:31:00 +00:00
Ben Gras
447b988154 exec now uses phys_zero system call to zero bss segments (instead of
using phys_copy to copy zeroes there for every kb), which is a big
optimisation in some cases

fixed a bug that was introduced when function keys became notifies
2005-06-01 09:39:45 +00:00
Jorrit Herder
a3d2f35993 Fixed minor bug in PM's child time administration. 2005-06-01 08:55:22 +00:00
Jorrit Herder
ea46d51176 Added time.c 2005-05-31 10:57:19 +00:00
Jorrit Herder
322ec9ef8b Moved stime, time, times POSIX calls from FS to PM. Removed child time
accounting from kernel (now in PM).  Large amount of files in this commit
is due to system time problems during development.
2005-05-31 09:50:51 +00:00
Jorrit Herder
9646824fce Fixed PM send() failed warning: don't reply to killed process that did reboot.
:  `VS: Enter Log.  Lines beginning with `CVS:' are removed automatically
2005-05-30 09:29:48 +00:00
Jorrit Herder
07d582872f Fixed a bug in PM: sending of reply messages didn't check if destination
process is still alive. This caused a panic in some situations, e.g., when
all processes are killed on a shutdown.
2005-05-27 13:10:58 +00:00
Jorrit Herder
0899f82ab2 Fixed some minor issues with the NOTIFY call. 2005-05-24 14:35:58 +00:00
Jorrit Herder
307c825515 New NOTIFY trap (IPC call) to send queued notification messages.
The call works. Permission check, restriction of outstanding notifications
to be added. Low level code to make it work from within interrupt handlers
will be added as well.
2005-05-19 14:05:51 +00:00
Jorrit Herder
2ebe535030 *** empty log message *** 2005-05-19 09:38:29 +00:00
Jorrit Herder
1cb880b158 Intermediate update---please await next commit. 2005-05-19 09:36:44 +00:00
Jorrit Herder
efa9c84c8b *** empty log message *** 2005-05-13 09:00:59 +00:00
Jorrit Herder
95151cb265 Renamed header file. 2005-05-13 08:59:19 +00:00
Jorrit Herder
1ecc6bf3b3 Removed 'system process' magic from PM and FS. 2005-05-13 08:57:08 +00:00
Ben Gras
0e9261ed5a Rename mm (memory manager) to pm (process manager), involved renaming
dir..
2005-05-03 15:35:52 +00:00