- Intorduce and use a message type for VFS_GETDENTS, VFS_READ,
VFS_WRITE.
- Some cleanup to related functions where vir_bytes are replaced (and
casted to/from, in parameter definition and local variables as well.
This allow to see more clearly which function receives unsafe
(pointer) values, or at least values which are not supposed to be
valid in the address space of VFS. The current patch does so only
for the minimal amount of functions which are concerned with the
introduction of the new message type.
Change-Id: I0cdca97409c4016d02fae067b48bf55d37572c5c
- Updated system calls VFS_ACCESS, VFS_CHDIR, VFS_CHMOD, VFS_CHROOT,
VFS_MKDIR, VFS_OPEN, VFS_RMDIR, VSF_UNLINK
- Removed M3_STRING and M3_LONG_STRING, which are tied to a specific
"generic" message, and replaced where needed with M_PATH_STRING_MAX,
which is tied to the mess_lc_vfs_path message.
Change-Id: If287c74f5ece937b9431e5d95b5b58a3c83ebff1
- Cleanup of unused macros for VFS - FS protocols
- Update servers/vfs/README to reflect the new requests names.
- Alphabetically re-order the message union, as well as minor
formatting, for readability.
Change-Id: Ief7c38489e93bcf5f795dccbf3a8e10b44b95af4
All of these requests share the same message type as at least one server
manages those requests in the same handler, just by checking the actual
type of the request, and then acting upon it.
Change-Id: I17337b4c67ae209523574c22ccc108cf5f1e65e9
These two request are handled by the same function in some FSes, which
prevents us from using two different kinds of messages.
Change-Id: Ib2fc80bdd56ef67db6b4c51cf8963353a761aab1
These two request are handled by the same function in some FSes, which
prevents us from using two different kinds of messages.
Change-Id: Iede3a0251d8d84ca7f121c56f30f42b045b0c737
Those messages offer a simple array of the given type. This should allow
for fast and simple prototyping.
When a protocol is fixed, then proper message types should be defined.
Change-Id: I4e98eeb0493924f3015862a51d14d894315e2bc2
This implements a near noop setpgid, unless the use is one equivalent
to setsid, in which case it will behave as such.
Also activates setpgrp, which is implemented in terms of setpgid.
Change-Id: I84411cb1957351aa1d3985623cd9e69bdf6f8d4c
. define _MINIX_SYSTEM for all system code from minix.service.mk
. hide some system-level declarations and definitions
behind _MINIX_SYSTEM to cleanly fix host tool build problems on
Minix (such as: NONE being defined and paddr_t being used but not
declared)
. the similar definition _SYSTEM is unsuitable as it changes the
values of errno definitions
Change-Id: I407de79e2575115243a074b16e79546a279cfa3e
Change the kernel to add features to vircopy and safecopies so that
transparent copy fixing won't happen to avoid deadlocks, and such copies
fail with EFAULT.
Transparently making copying work from filesystems (as normally done by
the kernel & VM when copying fails because of missing/readonly memory)
is problematic as it can happen that, for file-mapped ranges, that that
same filesystem that is blocked on the copy request is needed to satisfy
the memory range, leading to deadlock. Dito for VFS itself, if done with
a blocking call.
This change makes the copying done from a filesystem fail in such cases
with EFAULT by VFS adding the CPF_TRY flag to the grants. If a FS call
fails with EFAULT, VFS will then request the range to be made available
to VM after the FS is unblocked, allowing it to be used to satisfy the
range if need be in another VFS thread.
Similarly, for datacopies that VFS itself does, it uses the failable
vircopy variant and callers use a wrapper that talk to VM if necessary
to get the copy to work.
. kernel: add CPF_TRY flag to safecopies
. kernel: only request writable ranges to VM for the
target buffer when copying fails
. do copying in VFS TRY-first
. some fixes in VM to build SANITYCHECK mode
. add regression test for the cases where
- a FS system call needs memory mapped in a process that the
FS itself must map.
- such a range covers more than one file-mapped region.
. add 'try' mode to vircopy, physcopy
. add flags field to copy kernel call messages
. if CP_FLAG_TRY is set, do not transparently try
to fix memory ranges
. for use by VFS when accessing user buffers to avoid
deadlock
. remove some obsolete backwards compatability assignments
. VFS: let thread scheduling work for VM requests too
Allows VFS to make calls to VM while suspending and resuming
the currently running thread. Does currently not work for the
main thread.
. VM: add fix memory range call for use by VFS
Change-Id: I295794269cea51a3163519a9cfe5901301d90b32
The constants ANY, NONE, and SELF are now a function of the way the
endpoint number is split between a generation number and a process
slot number, rather than the other way around. This allows for the
use of bit masking and shifting instead of the previous (and more
expensive) multiplication and division.
Change-Id: Id890eea74435444128c75eb0c89816b948f43c0b
This patch adds pthread compatibility by using libmthread.
To use this with a program using pthreads, you have to replace
#include <pthread>
with
#define _MTHREADIFY_PTHREADS
#include <minix/mthreads>
This also changes the initialization function to be a constructor, which
is implicitly called before the call to main. This allows for
conformance with pthreads, while not paying a high price by checking on
each mthread_* call whether the library has been initialized or not.
As mthread_init is now a constructor, it also has been set as static, and
relevent calls removed from programs using it.
Change-Id: I2aa375db557958d2bee9a70d285aabb990c88f00
- Fix for possible unset uid/gid in toproto
- Fix for default mtree style
- Update libelf
- Importing libexecinfo
- Resynchronize GCC, mpc, gmp, mpfr
- build.sh: Replace params with show-params.
This has been done as the make target has been renamed in the same
way, while a new target named params has been added. This new
target generates a file containing all the parameters, instead of
printing it on the console.
- Update test48 with new etc/services (Fix by Ben Gras <ben@minix3.org)
get getservbyport() out of the inner loop
Change-Id: Ie6ad5226fa2621ff9f0dee8782ea48f9443d2091
. use netbsd sigframe, sigcontext struct
. netbsd sigframe *contains* sigcontext; use that directly
in kernel sigsend
. drop two fields from minix x86 stackframe.h (process context)
that were unused, retadr and st
use in-sigframe sigcontext
Change-Id: Ib59d699596dc3a78163dee59f19730482fdddf11
. use <sys/ioccom.h> to make ioctls
. use netbsd <sys/ioctl.h>, include minix ioctls
. convert to varargs ioctl() like netbsd
Change-Id: Id5165780df48172b28bf0003603516d30d7c1abb
- Defining CLOCKS_PER_SEC = 100, instead of 60.
This define is here for legacy reasons, use sysconf(_SC_CLK_TCK) to
retrieve the actual number of clock tick per second of the system in
new code.
- Moving stime prototype to minix/sysutil.h
Change-Id: I76a73cd53ac2361845f2917f62af4125adfc615d
Also removing lseek64, pread64, pwrite64.
Those functions have lost their "raison d'être", when off_t switched to
64bits.
Change-Id: I5aea35f01d6d10e3d6578a70323da7be5eca315a
This allows us to write things like this:
message m;
m.m_notify.interrupts = new_value;
or
message *mp;
mp->m_notify.interrupts = new_value;
The shorthands macro have been adapted for the new scheme, and will be
kept as long as we have generic messages being used.
Change-Id: Icfd02b5f126892b1d5d2cebe8c8fb02b180000f7
Fix a bug where a filesystem label could overflow the reserved buffer.
This was already possible with 32 bits values, but is more proeminent
with dev_t being 64 bits.
Change-Id: Idc04ed355d1dd92b7a8ce4699de832661a5c4ccd
This patch adds compile-time check for each message type to ensure the
size is within the IPC assumptions.
This will allow messages specific to a protocol to use from now on the
proper types for each fields, while preventing from any unsuspected
side effect when updating type definitions.
Change-Id: Iad64f81a6b6726321fbc492ac37ceeaaa57aa6cd
. create signals-related struct message type to store sigset_t
directly
. create notify-specific message types, so the generic NOTIFY_ARG
doesn't exist anymore
. various related test expansions, improvements, fixes
. add a few error-checks to sigismember() calls
. rename kernel call specific signals fields to SYS_*
Change-Id: I53c18999b5eaf0cfa0cb25f5330bee9e7ad2b478
. also implement some netbsd-style tty ioctls
. also implement SIGINFO
. also import netbsd stty
. rename keymap minix CMIN (for ctrl+minus on numeric keypad)
to CNMIN; to keep unchanged control character default CMIN in
new <sys/ttydefaults.h>
. convert CS[5678] logic in rs232 driver to explicit setting of LC
bits
Change-Id: I9b7d2963fe9aec00fb6e7535ef565b3191fc1c1d
import/switch of:
init, getty, reboot, halt, shutdown, wall, last
changes:
. change reboot() call to netbsd prototype and args
. allows pristine <utmp.h>
. use clean <sys/reboot.h> instead of <minix/reboot.h>
. implement TIOCSCTTY for use by getty so getty can get
controlling terminal from init's child(ren)
. allow NULL envp for exec
Change-Id: I5ca02cb4230857140c08794bbfeba7df982c58a3
* Also change _orig to _intr for clarity
* Cleaned up {IPC,KER}VEC
* Renamed _minix_kernel_info_struct to get_minix_kerninfo
* Merged _senda.S into _ipc.S
* Moved into separate files get_minix_kerninfo and _do_kernel_call
* Adapted do_kernel_call to follow same _ convention as ipc functions
* Drop patches in libc/net/send.c and libc/include/namespace.h
Change-Id: If4ea21ecb65435170d7d87de6c826328e84c18d0
- introduce new call numbers, names, and field aliases;
- initialize request messages to zero for all ABI calls;
- format callnr.h in the same way as com.h;
- redo call tables in both servers;
- remove param.h namespace pollution in the servers;
- make brk(2) go to VM directly, rather than through PM;
- remove obsolete BRK, UTIME, and WAIT calls;
- clean up path copying routine in VFS;
- move remaining system calls from libminlib to libc;
- correct some errno-related mistakes in libc routines.
Change-Id: I2d8ec5d061cd7e0b30c51ffd77aa72ebf84e2565
These calls are sent to VFS, and thus should be prefixed with VFS_.
Clean up the protocol and PM's main function a bit.
Since the protocol is substantially big and different from normal VFS
requests, this protocol retains its own numbering range for now.
Change-Id: Ia62104b5c5c929ed787144816d2e4cc70bed3b0b
The getsysinfo(2), getrusage(2), and svrctl(2) calls used the same
call number to different services. Since we want to give each service
its own call number ranges, this is no longer tenable. This patch
introduces per-service call numbers for these calls.
Note that the remainder of the COMMON_ range is left intact, as these
the remaining requests in it are processed by SEF and thus server-
agnostic. The range should really be prefixed with SEF_ now.
Change-Id: I80d728bbeb98227359c525494c433965b40fefc3
- move system calls for use by services from libminlib into libsys;
- move srv_fork(2) and srv_kill(2) from RS and into libsys;
- replace getprocnr(2) with sef_self(3);
- rename previous getnprocnr(2) to getprocnr(2);
- clean up getepinfo(2);
- change all libsys calls that used _syscall to use _taskcall, so as
to avoid going through errno to pass errors; this is already how
most calls work anyway, and many of the calls previously using
_syscall were already assumed to return the actual error;
- initialize request messages to zero, for future compatibility
(note that this does not include PCI calls, which are in need of a
much bigger overhaul, nor kernel calls);
- clean up more of dead DS code as a side effect.
Change-Id: I8788f54c68598fcf58e23486e270c2d749780ebb
NetBSD libc implements these as wrappers around setitimer(2),
sigsuspend(2), and getrusage(2), respectively.
Change-Id: I0c5e725b3e1316bddd3a3ff7ef65d57d30afd10d
. add all sys/sys headers not already present to help compiling
. take netbsd dirent.h and struct dirent; main result is
introducing d_type and d_namlen that have to be set by getdents()
in all FS code implementing it
. d_off is gone
. alignment of the struct has become 8 bytes instead of 4
. remove _MAX_BLOCK_SIZE, _MIN_BLOCK_SIZE, _STATIC_BLOCK_SIZE
. libminlib: cleanup unused yet duplicate code
. mfs: throw out the long-broken v1, v2 support
. new test for dirent contents filled by getdents()
Change-Id: I1459755c7ba5e5d1c9396d3a587ce6e63ddc283e
- all TTY-related exceptions have now been merged into the regular
code paths, allowing non-TTY drivers to expose TTY-like devices;
- as part of this, CTTY_MAJOR is now fully managed by VFS instead of
being an ugly stepchild of the TTY driver;
- device styles have become completely obsolete, support for them has
been removed throughout the system; same for device flags, which had
already become useless a while ago;
- device map open/close and I/O function pointers have lost their use,
thus finally making the VFS device code actually readable;
- the device-unrelated pm_setsid has been moved to misc.c;
- some other small cleanup-related changes.
Change-Id: If90b10d1818e98a12139da3e94a15d250c9933da
This single function allows copying file descriptors from and to
processes, and closing a previously copied remote file descriptor.
This function replaces the five FD-related UDS backcalls. While it
limits the total number of in-flight file descriptors to OPEN_MAX,
this change greatly improves crash recovery support of UDS, since all
in-flight file descriptors will be closed instead of keeping them
open indefinitely (causing VFS to crash on system shutdown). With the
new copyfd call, UDS becomes simpler, and the concept of filps is no
longer exposed outside of VFS.
This patch also moves the checkperms(2) stub into libminlib, thus
fully abstracting away message details of VFS communication from UDS.
Change-Id: Idd32ad390a566143c8ef66955e5ae2c221cff966
- remove non-PCI support, since all supported platforms with at_wini
devices also have PCI support by now;
- correspondingly, stop using information from the BIOS altogether;
- limit each driver instance to one controller, to be in line with
the general MINIX3 one-instance-per-controller driver model; this
limits the number of disks per at_wini instance to four;
- go through the controllers by the order of their occurrence in the
PCI table, thus removing the exception for compatibility devices;
- let the second at_wini instance shut down silently if there is only
one IDE controller;
- clean up some extra code we don't need anymore, and resolve some
WARNS=5 level warnings.
Overall, these changes should simplify automatic loading of the right
disk drivers at boot time in the future.
Change-Id: Ia64d08cfbeb9916abd68c9c2941baeb87d02a806
- change "vid/did" to "vid:did", old form still supported for now;
- allow "vid:did/subvid:subdid" specification in system.conf, in
which case a device will be visible to a driver if the subsystem
VID/DID also match.
Change-Id: I7aef54da1b0bc81e24b5d98f1a28416f38f8b266
This commit separates the low-level keyboard driver from TTY, putting
it in a separate driver (PCKBD). The commit also separates management
of raw input devices from TTY, and puts it in a separate server
(INPUT). All keyboard and mouse input from hardware is sent by drivers
to the INPUT server, which either sends it to a process that has
opened a raw input device, or otherwise forwards it to TTY for
standard processing.
Design by Dirk Vogt. Prototype by Uli Kastlunger.
Additional changes made to the prototype:
- the event communication is now based on USB HID codes; all input
drivers have to use USB codes to describe events;
- all TTY keymaps have been converted to USB format, with the effect
that a single keymap covers all keys; there is no (static) escaped
keymap anymore;
- further keymap tweaks now allow remapping of literally all keys;
- input device renumbering and protocol rewrite;
- INPUT server rewrite, with added support for cancel and select;
- PCKBD reimplementation, including PC/AT-to-USB translation;
- support for manipulating keyboard LEDs has been added;
- keyboard and mouse multiplexer devices have been added to INPUT,
primarily so that an X server need only open two devices;
- a new "libinputdriver" library abstracts away protocol details from
input drivers, and should be used by all future input drivers;
- both INPUT and PCKBD can be restarted;
- TTY is now scheduled by KERNEL, so that it won't be punished for
running a lot; without this, simply running "yes" on the console
kills the system;
- the KIOCBELL IOCTL has been moved to /dev/console;
- support for the SCANCODES termios setting has been removed;
- obsolete keymap compression has been removed;
- the obsolete Olivetti M24 keymap has been removed.
Change-Id: I3a672fb8c4fd566734e4b46d3994b4b7fc96d578
Most systems provide the full version number in the
'release' field and the kernel version in 'version'.
Minix used to split the full version number between
release and version which caused problems for pkgsrc
and other applications. This patch brings Minix's
uname in line with other systems such as NetBSD.
It also brings the getty banner in line with NetBSD.
Old Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3
version->2.1
machine->i686
New Minix uname:
sysname->Minix
nodename->10.0.2.15
release->3.2.1
version->Minix 3.2.1 (GENERIC)
machine->i686
Change-Id: I966633dfdcf2f9485966bb0d0d042afc45bbeb7d
The set of processes to which a SIGKMESS signal is sent whenever new
diagnostics messages are added to the kernel's message buffer, is now
no longer hardcoded. Instead, processes can (un)register themselves
to receive such notifications, by means of sys_diagctl().
Change-Id: I9d6ac006a5d9bbfad2757587a068fc1ec3cc083e
* Renamed struct timer to struct minix_timer
* Renamed timer_t to minix_timer_t
* Ensured all the code uses the minix_timer_t typedef
* Removed ifdef around _BSD_TIMER_T
* Removed include/timers.h and merged it into include/minix/timers.h
* Resolved prototype conflict by renaming kernel's (re)set_timer
to (re)set_kernel_timer.
Change-Id: I56f0f30dfed96e1a0575d92492294cf9a06468a5
The tool has been changed heavily to match our VND driver model.
NetBSD is in the process of renaming it from vnconfig(8) to
vndconfig(8). To keep things in sync, we have to play along.
Change-Id: Ie86df184f03ab00573ea76b43c9caa0412e8321d
This call copies a file descriptor from a remote process into the
calling process. The call is for the VND driver only, and in the
future, ACLs will prevent any other process from using this call.
Change-Id: Ib16fdd1f1a12cb38a70d7e441dad91bc86898f6d
- include all ioctl subheaders, properly listing all letters;
- change FBD's ioctl calls to use 'B' instead of 'F', in
preparation of the VND driver.
Change-Id: Ia718979568cc057f47cf505a89238d5b3b6695d4
Not all services involved in block I/O go through VM to access the
blocks they need. As a result, the blocks in VM may become stale,
possibly causing corruption when the stale copy is restored by a
service that does go through VM later on. This patch restores support
for forgetting cached blocks that belong to a particular device, and
makes the relevant file systems use this functionality 1) when
requested by VFS through REQ_FLUSH, and 2) upon unmount.
Change-Id: I0758c5ed8fe4b5ba81d432595d2113175776aff8
Previously, VFS would reopen a character device after a driver crash
if the associated file descriptor was opened with the O_REOPEN flag.
This patch removes support for this feature. The code was complex,
full of uncovered corner cases, and hard to test. Moreover, it did not
actually hide the crash from user applications: they would get an
error code to indicate that something went wrong, and have to decide
based on the nature of the underlying device how to continue.
- remove support for O_REOPEN, and make playwave(1) reopen its device;
- remove support for the DEV_REOPEN protocol message;
- remove all code in VFS related to reopening character devices;
- no longer change VFS filp reference count and FD bitmap upon filp
invalidation; instead, make get_filp* fail all calls on invalidated
FDs except when obtained with the locktype VNODE_OPCL which is used
by close_fd only;
- remove the VFS fproc file descriptor bitmap entirely, returning to
the situation that a FD is in use if its slot points to a filp; use
FILP_CLOSED as single means of marking a filp as invalidated.
Change-Id: I34f6bc69a036b3a8fc667c1f80435ff3af56558f
- prefix them with VFS_ as they are going to VFS;
- give these calls normal call numbers;
- give them their own set of message field aliases;
- also make do_mapdriver a regular call.
Change-Id: I2140439f288b06d699a1f65438bd8306509b259e
- writing to a PTY master side blocks if there is not already a
blocked reader on the slave side, and select now reflects this;
- internally, TTY now uses a test based on "caller != NONE" rather
than "grant != GRANT_INVALID" to identify whether a call is
currently ongoing;
- "offset" fields have been removed as they equal the corresponding
"cum" fields;
- improved variable typing and function naming here and there;
- various other small fixes.
Change-Id: I6b51452888942e864b4e034e8c8490576184a23e
The new API now covers the entire character driver protocol, while
hiding all the message details. It should therefore be used by all
new character drivers. All existing drivers that already made use of
libchardriver have been changed to use the new API.
As one of the most important API changes, support for scatter and
gather transfers has been removed, as several key drivers already
did not support this, and it could be supported at the safecopy
level instead (for a future readv/writev).
Additional changes include:
- respond to block device open requests to avoid hanging VFS threads;
- add support for sef_cancel.
Change-Id: I1bab6c1cb66916c71b87aeb1db54a9bdf171fe6b
The block driver protocol and libblockdriver's bdr_ioctl hook are
changed, as well as the users of this hook. Other parts of the system
are expected to change accordingly eventually, since the ioctl(2)
prototype has been aligned with NetBSD's.
Change-Id: Ide46245b22cfa89ed267a38088fb0ab7696eba92
I/O control requests now come with the endpoint of the user process
that initiated the ioctl(2) call. It is stored in a new BDEV_USER
field, which is an alias for BDEV_FLAGS. The contents of this field
are to be used only in highly specific situations. It should be
preserved (not replaced!) by services that forward IOCTL requests,
and may be set to NONE for service-initiated IOCTL requests.
Change-Id: I68a01b9ce43eca00e61b985a9cf87f55ba683de4
The original R_BIT and W_BIT definitions have nothing to do with the
way these bits are used. Their distinct usage is more apparent when
they have different names.
Change-Id: Ia984457f900078b2e3502ceed565fead4e5bb965
This constant determines the range of valid device_id_t values that
a block driver can return from the bdr_device hook: a value between
0 and (BLOCKDRIVER_MAX_DEVICES - 1) inclusive.
Change-Id: I80fac469e88ac13d4b869007e6f2c2f7569da433
