Commit graph

139 commits

Author SHA1 Message Date
Thomas Cort
66b369c62c opendir(3): on success, don't clobber errno
The opendir(3) function was setting errno to ENOTDIR even
when the directory existed and was opened successfully. This
caused git to falsely detect an error.

This change moves the errno assignment into the failure code
block. It also adds a test to test24 to check for errno
changing when opendir(3) returns success.
2011-06-29 19:58:41 +02:00
Thomas Veerman
22049c1ec3 Enable generation of .gitignore file for the test dir 2011-04-21 13:20:13 +00:00
Thomas Veerman
827daf1fca Make test40 behave
Make test40 behave better. It should create its own subdirectory to
conduct its tests and should not write to /tmp. Also, the master-slave
terminal pair it tries to open might be in use; it should try to obtain
another pair. These changes allow the test to be run multiple times
simultaneously from different paths (to test select() more intensively).
2011-04-21 13:18:00 +00:00
David van Moolenbroek
020277a38f libmthread: support for thread-local storage (keys/specifics) 2011-04-14 11:54:43 +00:00
Thomas Veerman
b1a60476c0 Return errors directly instead of using errno 2011-04-13 14:01:13 +00:00
Thomas Veerman
c8d0edc06a - Refactor mthread structure fields to prevent name clashes
- Remove sanity checks for initialized mutexes and condition variables. This
  significantly boosts performance. The checks can be turned back on by
  compiling libmthread with MTHREAD_STRICT. According to POSIX operations on
  uninitialized variables are a MAY fail if, therefore allowing this
  optimization.
- Test59 has to be accommodated to the lack of sanity checks on uninitialized
  variables in the library. It specifically tests for them and will run into
  segfaults when the checks are absent in the library.
- Fix a few bugs related to the scheduler
- Do some general code cleanups
2011-03-18 10:29:54 +00:00
Thomas Veerman
ba8af817fc Fix compilation error. Does not need ansi.h header. 2011-03-10 14:10:16 +00:00
Arun Thomas
4c0cc2719e Allow for overriding GCC var in test Makefile 2010-11-19 10:33:26 +00:00
Thomas Veerman
a7072a5e1c Revamp the mthread library and update test59
Before, the 'main thread' of a process was never taken into account anywhere in
the library, causing mutexes not to work properly (and consequently, neither
did the condition variables). For example, if the 'main thread' (that is, the
thread which is started at the beginning of a process; not a spawned thread by
the library) would lock a mutex, it wasn't actually locked.
2010-09-30 13:44:13 +00:00
Thomas Veerman
12e167f672 Add libmthread and test59 to test the implementation 2010-09-21 12:22:38 +00:00
David van Moolenbroek
d299a6422b make all other commands use ProcFS 2010-09-14 21:31:56 +00:00
Thomas Veerman
e7252adc1e Clean up the created temp file after running the test. 2010-09-02 09:33:37 +00:00
Thomas Veerman
0b00cf70b6 - Return ENOENT when trying to add files to removed (but open) directories.
- Add test58 to test this behavior.
2010-09-01 09:07:18 +00:00
Thomas Veerman
a4c30acd9d Improve UDS testing. Fix a few bugs. Add testing of passing file descriptors.
Contributed by Thomas Cort.
2010-08-30 13:49:49 +00:00
Arun Thomas
de231a713e Move MIN() and MAX() macros to sys/params.h 2010-08-21 13:10:41 +00:00
Arun Thomas
9a21d1a2fd Macros for symbols used in both ASM and C
-The macros take care of prepending the leading underscore when
 necessary.
2010-08-17 16:44:07 +00:00
Erik van der Kouwe
4e95b347a7 Make it possible again to compile the tests without installing GCC first 2010-08-09 05:51:01 +00:00
Erik van der Kouwe
c8f70b8154 Fix tests when run as root; use bin account but current directory 2010-08-06 12:33:32 +00:00
Erik van der Kouwe
c3c97e66b1 Fix ar error in testsh1.sh (ar was previously renamed to aal) 2010-08-06 09:28:26 +00:00
Erik van der Kouwe
5d4ef90b2c Fix cdiff error in testsh1.sh 2010-08-06 09:27:49 +00:00
Erik van der Kouwe
a9d31d3169 Remove spurious space 2010-08-05 13:35:41 +00:00
Thomas Veerman
e8846c3930 Also run test56, please 2010-08-04 10:03:50 +00:00
Ben Gras
83fc90c8c3 test57: test that state isn't corrupted after a signal handler being executed. 2010-08-04 09:00:58 +00:00
Ben Gras
e1dc59bd16 test Makefile: use any gcc in path 2010-08-03 11:20:31 +00:00
Thomas Veerman
253b4b3fe5 - Add support for ST_NOTRUNC to struct statvfs.
- Let tests that test for long file names check for that flag, so that they can
  verify the results properly.
2010-08-02 11:16:32 +00:00
Thomas Veerman
d26290a017 Add test56 to test our UDS implementation. Contributed by Thomas Cort 2010-07-15 14:52:29 +00:00
Ben Gras
8b0dbff312 test44: suid root to call getsysinfo 2010-07-13 18:27:42 +00:00
Ben Gras
835232d504 tests: fixes to accomodate growing OPEN_MAX and a logic error 2010-07-13 12:38:58 +00:00
Ben Gras
78ce6f86f7 tests: turn of optimisation when compiling the tests, less unexpected optimisations. 2010-07-12 16:22:05 +00:00
Ben Gras
b4345d7598 test44: add bogus getsysinfo() to test invalid memory range request to vm
test case contributed by Roman Ignatov.
2010-07-10 00:24:43 +00:00
Kees van Reeuwijk
0cfdb11450 Repair errors and warnings flagged by llvm. 2010-07-06 11:29:23 +00:00
Arun Thomas
1f20814fe8 Fix grep test 4 in testsh1 2010-06-27 10:59:14 +00:00
Ben Gras
762665cec1 some prettification for test55. 2010-06-24 00:27:26 +00:00
Ben Gras
e3354a8556 test 55 for statvfs. fix formatting bug in test54. 2010-06-24 00:06:40 +00:00
Ben Gras
f2c3cbab00 test for pwrite() (Contributed by Buccapatnam Tirumala, Gautam) 2010-06-22 22:07:23 +00:00
Tomas Hruby
21725c107d cd subdir && $(MAKE) targets -> $(MAKE) -C subdir targets
- first step towards parallel building
2010-06-22 12:03:09 +00:00
Arun Thomas
8579c59b3f Minor makefile changes for GCC 2010-06-01 09:41:31 +00:00
Erik van der Kouwe
8bca982581 Remove those annoying $Id and $Revision tags 2010-05-31 20:00:08 +00:00
David van Moolenbroek
9ba65d2ea8 This patch switches the MINIX3 ethernet driver stack from a port-based
model to an instance-based model. Each ethernet driver instance is now
responsible for exactly one network interface card. The port field in
/etc/inet.conf now acts as an instance field instead.

This patch also updates the data link protocol. This update:
- eliminates the concept of ports entirely;
- eliminates DL_GETNAME entirely;
- standardizes on using m_source for IPC and DL_ENDPT for safecopies;
- removes error codes from TASK/STAT replies, as they were unused;
- removes a number of other old or unused fields;
- names and renames a few other fields.

All ethernet drivers have been changed to:
- conform to the new protocol, and exactly that;
- take on an instance number based on a given "instance" argument;
- skip that number of PCI devices in probe iterations;
- use config tables and environment variables based on that number;
- no longer be limited to a predefined maximum of cards in any way;
- get rid of any leftover non-safecopy support and other ancient junk;
- have a correct banner protocol figure, or none at all.

Other changes:
* Inet.conf is now taken to be line-based, and supports #-comments.
  No existing installations are expected to be affected by this.
* A new, select-based asynchio library replaces the old one.
  Kindly contributed by Kees J. Bot.
* Inet now supports use of select() on IP devices.
  Combined, the last two changes together speed up dhcpd
  considerably in the presence of multiple interfaces.
* A small bug has been fixed in nonamed.
2010-05-17 22:22:53 +00:00
Erik van der Kouwe
7570df267f Full 64-bit multitplication and division added to u64 library 2010-05-17 16:44:26 +00:00
Arun Thomas
5706670029 Convert boot/ and commands/ over to bsdmake 2010-05-12 16:28:54 +00:00
Thomas Veerman
4ae9c03147 - Add test52 to test FPU context switching
- Make test/run count how many tests it's going to perform instead of having to
  manually update it ourselves.
2010-05-03 15:12:39 +00:00
Erik van der Kouwe
1b7de33a68 Add timeout for test 7 to indicate which test (if any) hangs 2010-04-28 08:33:23 +00:00
Erik van der Kouwe
5230a36c2e Add scancode reading capability to TTY 2010-04-15 07:08:04 +00:00
Erik van der Kouwe
32f43d7571 Add scancode reading capability to TTY 2010-04-15 06:55:32 +00:00
Cristiano Giuffrida
48c6bb79f4 Driver refactory for live update and crash recovery.
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.

VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.

INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.

DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS. 
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.

DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.

KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
2010-04-08 13:41:35 +00:00
Ben Gras
2fd5eb2569 ipc test improvements
. rename testshm.sh to test.sh so all test scripts are called test.sh
 . delete msg* tests as msg* functionality isn't implemented
 . add ipc/test.sh that runs all test.sh scripts in the subdirs
2010-04-08 13:11:37 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Thomas Veerman
bef0e3eb63 - Add support for the ucontext system calls (getcontext, setcontext,
swapcontext, and makecontext).
- Fix VM to not erroneously think the stack segment and data segment have
  collided when a user-space thread invokes brk().
- Add test51 to test ucontext functionality.
- Add man pages for ucontext system calls.
2010-03-12 15:58:41 +00:00
Ben Gras
35a108b911 panic() cleanup.
this change
   - makes panic() variadic, doing full printf() formatting -
     no more NO_NUM, and no more separate printf() statements
     needed to print extra info (or something in hex) before panicing
   - unifies panic() - same panic() name and usage for everyone -
     vm, kernel and rest have different names/syntax currently
     in order to implement their own luxuries, but no longer
   - throws out the 1st argument, to make source less noisy.
     the panic() in syslib retrieves the server name from the kernel
     so it should be clear enough who is panicing; e.g.
         panic("sigaction failed: %d", errno);
     looks like:
         at_wini(73130): panic: sigaction failed: 0
         syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
   - throws out report() - printf() is more convenient and powerful
   - harmonizes/fixes the use of panic() - there were a few places
     that used printf-style formatting (didn't work) and newlines
     (messes up the formatting) in panic()
   - throws out a few per-server panic() functions
   - cleans up a tie-in of tty with panic()

merging printf() and panic() statements to be done incrementally.
2010-03-05 15:05:11 +00:00