Commit graph

140 commits

Author SHA1 Message Date
Ben Gras
1e399dd8bd various kernel printing fixes
. remove some call cycles by low-level functions invoking printf(); e.g.
	  send_sig() gets a return value that the caller should check
	. reason: very-early-phase printf() would trigger a printf() causing
	  infinite recursion -> GPF
	. move serial initialization a little earlier so DEBUG_EXTRA works for
	  serial earlier (e.g. its first instance, for "cstart")
	. closes tracker item 583:
	  System Fails to Complete Startup with Verbose 2 and 3 Boot Parameters,
	  reported by Stephen Hatton / pikpik.
2012-03-28 18:23:12 +02:00
David van Moolenbroek
9cca9d7566 Kernel: arch-related cleanup
- move umap_bios() into arch-specific code
- move proc.p_fpu_state access into arch-specific blocks
2012-03-26 14:19:33 +02:00
Ben Gras
6a73e85ad1 retire _PROTOTYPE
. only good for obsolete K&R support
	. also remove a stray ansi.h and the proto cmd
2012-03-25 16:17:10 +02:00
David van Moolenbroek
2a395dd8b4 Kernel: introduce vm_check_range 2012-03-24 19:51:13 +01:00
David van Moolenbroek
08af3f672b Kernel: replace vm_contiguous with vm_lookup_range 2012-03-24 19:51:12 +01:00
Ben Gras
6af9856d4a libcompat_minix-centric cleanup
remove some old minix-userland-specific stuff

	. /etc/ttytab as a file, and minix-compat function (fftyslot()),
	  replaced by /etc/ttys and new libc functions
	. also remove minix-specific nlist(), cuserid(), fttyslot(), v8 regex
	  functions and <compat/regex.h>
	. and remaining minix-only utilities that use them
	. also unused <compat/pwd.h> and <compat/syslog.h> and
	  redundant <sys/sigcontext.h>
2012-03-16 17:06:24 +01:00
David van Moolenbroek
c8c9565a03 Kernel: only reset/reload FPU state when necessary 2012-03-05 22:32:14 +01:00
David van Moolenbroek
0a8a2ecfb5 Kernel: pass FPU restore exception to user process
Previously, user processes could cause a kernel panic upon FPU state
restore, by passing bogus FPU state to the kernel (through e.g.
sigreturn). With this patch, the process is now sent a SIGFPE signal
instead.
2012-03-05 22:32:14 +01:00
Ben Gras
ca47635d0a try multiple reset methods
. fixes reboot-hang under vbox
	. makes experience nicer under vmware
	. taken from netbsd reset code
2012-02-20 23:46:38 +01:00
Antoine Leca
3fb8cb760c More cleaning up 2012-02-15 19:04:58 +00:00
Tomas Hruby
758d788bbe SMP - asyn send SMP safe
- we must not deliver messages from/to unstable address spaces.
  In such a case, we must postpone the delivery. To make sute
  that a process which is expecting an asynchronous message does
  not starve, we must remember that we skipped delivery of some
  messages and we must try to deliver again once the source
  address space is stable again.
2012-01-13 11:30:01 +00:00
Tomas Hruby
e4d46a2146 KERNEL - has_pending() not exposed
- has_pending() takes a special argument that tells the code
  whether we are scanning for asynchronous message or something
  else.

- has_pending() is not used directly anymore

- the new functions are wrappings around has_pending() to make
  the use more comfortable.

- these functions should become static inline eventually
2012-01-13 11:29:59 +00:00
Ben Gras
b984fa41df Revert "print kernel stacktrace for exceptions in kernel"
This reverts commit eff1369cab.

This was in a working branch and I only intended to commit
exception.c. But I committed the exact inverse. Sorry.
2011-07-22 15:01:44 +02:00
Ben Gras
eff1369cab print kernel stacktrace for exceptions in kernel
fpu alignment check feature, checksum feature
2011-07-22 11:03:45 +00:00
Arun Thomas
c356e9997e kernel: fix GCC warnings 2011-07-18 19:44:59 +02:00
Gianluca Guida
cc17b27a2b Build NetBSD libc library in world in ELF mode.
3 sets of libraries are built now:
  . ack: all libraries that ack can compile (/usr/lib/i386/)
  . clang+elf: all libraries with minix headers (/usr/lib/)
  . clang+elf: all libraries with netbsd headers (/usr/netbsd/)

Once everything can be compiled with netbsd libraries and headers, the
/usr/netbsd hierarchy will be obsolete and its libraries compiled with
netbsd headers will be installed in /usr/lib, and its headers
in /usr/include. (i.e. minix libc and current minix headers set
will be gone.)

To use the NetBSD libc system (libraries + headers) before
it is the default libc, see:
   http://wiki.minix3.org/en/DevelopersGuide/UsingNetBSDCode
This wiki page also documents the maintenance of the patch
files of minix-specific changes to imported NetBSD code.

Changes in this commit:
  . libsys: Add NBSD compilation and create a safe NBSD-based libc.
  . Port rest of libraries (except libddekit) to new header system.
  . Enable compilation of libddekit with new headers.
  . Enable kernel compilation with new headers.
  . Enable drivers compilation with new headers.
  . Port legacy commands to new headers and libc.
  . Port servers to new headers.
  . Add <sys/sigcontext.h> in compat library.
  . Remove dependency file in tree.
  . Enable compilation of common/lib/libc/atomic in libsys
  . Do not generate RCSID strings in libc.
  . Temporarily disable zoneinfo as they are incompatible with NetBSD format
  . obj-nbsd for .gitignore
  . Procfs: use only integer arithmetic. (Antoine Leca)
  . Increase ramdisk size to create NBSD-based images.
  . Remove INCSYMLINKS handling hack.
  . Add nbsd_include/sys/exec_elf.h
  . Enable ELF compilation with NBSD libc.
  . Add 'make nbsdsrc' in tools to download reference NetBSD sources.
  . Automate minix-port.patch creation.
  . Avoid using fstavfs() as it is *extremely* slow and unneeded.
  . Set err() as PRIVATE to avoid name clash with libc.
  . [NBSD] servers/vm: remove compilation warnings.
  . u32 is not a long in NBSD headers.
  . UPDATING info on netbsd hierarchy
  . commands fixes for netbsd libc
2011-06-24 11:46:30 +02:00
Ben Gras
a77c2973b3 fix clang warnings -R in kernel/ and servers/ 2011-06-09 16:09:13 +02:00
Erik van der Kouwe
b08dff6011 Remove unused duplicate grant code in umap 2011-06-09 05:06:34 +00:00
Erik van der Kouwe
e969b5e11b Remote unused segctl kernel call 2011-04-26 23:28:23 +02:00
Thomas Veerman
7457cbe62f Enable sending a notification when sending of an asynchronous message was
completed (successfully or not). AMF_NOTIFY_ERR can be used if the sender 
only wishes to be notified in case of an error (e.g., EDEADSRCDST). A new
endpoint ASYNCM will be the sender of the notification.
2011-04-08 15:14:48 +00:00
Arun Thomas
25a790a631 VM and kernel support for ELF 2011-02-26 23:00:55 +00:00
Ben Gras
b2d1109737 kernel - change print*() functions for ipc to generic ipc hook functions.
- used to implement ipc stats tracking code
2011-02-08 13:54:33 +00:00
David van Moolenbroek
a7285dfabc Kernel/RS: fix permission computation with 32+ system processes 2010-12-07 10:32:42 +00:00
Tomas Hruby
c9bfb13cdb Kernel keeps information about each cpu
- kernel maintains a cpu_info array which contains various
  information about each cpu as filled when each cpu boots

- the information contains idetification, features etc.
2010-10-26 21:07:27 +00:00
Tomas Hruby
ef92583c3a Busy idle loop when profiling
- the Intel architecture cycle counter (performance counter) does not
  count when the CPU is idle therefore we use busy loop instead of
  halting the cpu when there is nothing to schedule

- the downside is that handling interrupts may be accounted as idle
  time if a sample is taken before we get out of the nested trap and
  pick a new process
2010-09-23 10:49:52 +00:00
Tomas Hruby
123a968be3 32bit process flags
- we are running out of space in 16bit flags
2010-09-23 10:49:36 +00:00
Tomas Hruby
a665ae3de1 Userspace scheduling - exporting stats
- contributed by Bjorn Swift

- adds process accounting, for example counting the number of messages
  sent, how often the process was preemted and how much time it spent
  in the run queue. These statistics, along with the current cpu load,
  are sent back to the user-space scheduler in the Out Of Quantum
  message.

- the user-space scheduler may choose to make use of these statistics
  when making scheduling decisions. For isntance the cpu load becomes
  especially useful when scheduling on multiple cores.
2010-09-19 15:52:12 +00:00
Tomas Hruby
5b8b623765 SMP - lazy FPU
- when a process is migrated to a different CPU it may have an active
  FPU context in the processor registers. We must save it and migrate
  it together with the process.
2010-09-15 14:11:25 +00:00
Tomas Hruby
06b6e5624a SMP - Changed prototype of sys_schedule()
- sys_schedule can change only selected values, -1 means that the
  current value should be kept unchanged. For instance we mostly want
  to change the scheduling quantum and priority but we want to keep
  the process at the current cpu

- RS can hand off its processes to scheduler

- service can read the destination cpu from system.conf

- RS can pass the information farther
2010-09-15 14:10:42 +00:00
Tomas Hruby
fac5fbfdbf SMP - CPU local run queues
- each CPU has its own runqueues

- processes on BSP are put on the runqueues later after a switch to
  the final stack when cpuid works to avoid special cases

- enqueue() and dequeue() use the run queues of the cpu the process is
  assigned to

- pick_proc() uses the local run queues

- printing of per-CPU run queues ('2') on serial console
2010-09-15 14:10:18 +00:00
Tomas Hruby
62c666566e SMP - We boot APs
- kernel detects CPUs by searching ACPI tables for local apic nodes

- each CPU has its own TSS that points to its own stack. All cpus boot
  on the same boot stack (in sequence) but switch to its private stack
  as soon as they can.

- final booting code in main() placed in bsp_finish_booting() which is
  executed only after the BSP switches to its final stack

- apic functions to send startup interrupts

- assembler functions to handle CPU features not needed for single cpu
  mode like memory barries, HT detection etc.

- new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and
  kernel/arch/i386/include/arch_smp.h

- 16-bit trampoline code for the APs. It is executed by each AP after
  receiving startup IPIs it brings up the CPUs to 32bit mode and let
  them spin in an infinite loop so they don't do any damage.

- implementation of kernel spinlock

- CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 14:09:52 +00:00
Tomas Hruby
2a2a19e542 proc_init()
- code that initializes proc.c structures removed from main() and placed in
  proc_init() function
2010-09-15 14:09:43 +00:00
Tomas Hruby
ce4fd0c0fb Enable paging - some more code reshuffling 2010-09-15 14:09:41 +00:00
Tomas Hruby
f7ef192c02 Fixed warning noreturn function returns in arch_system.c 2010-08-06 12:48:26 +00:00
Erik van der Kouwe
df0ba02a38 Multiboot support (contributed by Feiran "Fam" Zheng);
keep in mind that GRUB needs to be patched to read MFS for now;
use /boot/image_latest to boot the last compiled image in GRUB
2010-07-23 14:24:34 +00:00
Cristiano Giuffrida
8cedace2f5 Scheduling parameters out of the kernel. 2010-07-13 15:30:17 +00:00
Cristiano Giuffrida
1f8dbed029 RS crash recovery support. 2010-07-06 22:05:21 +00:00
Ben Gras
e920c1e1df kernel: fix main prototype 2010-07-06 12:14:59 +00:00
Ben Gras
f6f814cb02 include, kernel: minor fixes to make compiling and linking work with clang.
(fixing warnings)
2010-07-06 11:59:19 +00:00
Erik van der Kouwe
fe07e7c984 Optional IPC logging 2010-06-24 13:31:40 +00:00
Tomas Hruby
360de619c0 No linear addresses in message delivery
- removes p_delivermsg_lin item from the process structure and code
  related to it

- as the send part, the receive does not need to use the
  PHYS_COPY_CATCH() and umap_local() couple.  

- The address space of the target process is installed before
  delivermsg() is called.

- unlike the linear address, the virtual address does not change when
  paging is turned on nor after fork().
2010-06-11 08:16:10 +00:00
Ben Gras
a09a8d4f3e kernel: fix for vm_init that triggered assert(ptproc == newptproc)
- zero cr3 in vm_init() to avoid switch_address_space() not doing anything.

 - add vm_stop() to disable paging on shutdown.
2010-06-07 22:21:45 +00:00
Tomas Hruby
cbc9586c13 Lazy FPU
- FPU context is stored only if conflict between 2 FPU users or while
  exporting context of a process to userspace while it is the active
  user of FPU

- FPU has its owner (fpu_owner) which points to the process whose
  state is currently loaded in FPU

- the FPU exception is only turned on when scheduling a process which
  is not the owner of FPU

- FPU state is restored for the process that generated the FPU
  exception. This process runs immediately without letting scheduler
  to pick a new process to resolve the FPU conflict asap, to minimize
  the FPU thrashing and FPU exception hadler execution

- faster all non-FPU-exception kernel entries as FPU state is not
  checked nor saved

- removed MF_USED_FPU flag, only MF_FPU_INITIALIZED remains to signal
  that a process has used FPU in the past
2010-06-07 07:43:17 +00:00
Ben Gras
2f892aca91 kernel fpu context switching: fix race condition
There seems to have been a broken assumption in the fpu context
restoring code.  It restores the context of the running process, without
guarantee that the current process is the one that will be scheduled.
This caused fpu saving for a different process to be triggered without
fpu hardware being enabled, causing an fpu exception in the kernel. This
practically only shows up with DEBUG_RACE on. Fix my thruby+me.

The fix
 . is to only set the fpu-in-use-by-this-process flag in the
   exception handler, and then take care of fpu restoring when
   actually returning to userspace

And the patch
 . translates fpu saving and restoring to c in arch_system.c,
   getting rid of a juicy chunk of assembly
 . makes osfxsr_feature private to arch_system.c
 . removes most of the arch dependent code from do_sigsend
2010-06-03 11:32:22 +00:00
Tomas Hruby
451a6890d6 scheduling - time quantum in miliseconds
- Currently the cpu time quantum is timer-ticks based. Thus the
  remaining quantum is decreased only if the processes is interrupted
  by a timer tick. As processes block a lot this typically does not
  happen for normal user processes. Also the quantum depends on the
  frequency of the timer.

- This change makes the quantum miliseconds based. Internally the
  miliseconds are translated into cpu cycles. Everytime userspace
  execution is interrupted by kernel the cycles just consumed by the
  current process are deducted from the remaining quantum.

- It makes the quantum system timer frequency independent.

- The boot processes quantum is loosely derived from the tick-based
  quantas and 60Hz timer and subject to future change

- the 64bit arithmetics is a little ugly, will be changes once we have
  compiler support for 64bit integers (soon)
2010-05-25 08:06:14 +00:00
Ben Gras
9ba760e603 kernel: oxpcie serial card support.
ask to map in oxpcie i/o memory and support serial i/o for it in the
kernel. set oxpcie=<address> in boot monitor (retrieve address using
pci_debug=1 output). (no sanity checking is done on the address
currently.) disabled by default.

The change also contains some other minor cleanup (a new serial.h to set
register info common to UART and the OXPCIe card, in-kernel memory
mapping a little more structured and env_get() to get sysenv variables
without knowing about the params_buffer).
2010-05-19 10:00:02 +00:00
Tomas Hruby
b90c2d7026 rename of mode/context switching functions
- this patch only renames schedcheck() to switch_to_user(),
  cycles_accounting_stop() to context_stop() and restart() to
  +restore_user_context()

- the motivation is that since the introduction of schedcheck() it has
  been abused for many things. It deserves a better name.  It should
  express the fact that from the moment we call the function we are in
  the process of switching to user.

- cycles_accounting_stop() was originally a single purpose function.
  As this function is called at were convenient places it is used in
  for other things too, e.g. (un)locking the kernel. Thus it deserves
  a better name too.

- using the old name, restart() does not call schedcheck(), however
  calls to restart are replaced by calls to schedcheck()
  [switch_to_user] and it calls restart() [restore_user_context]
2010-05-18 13:00:39 +00:00
Ben Gras
c5c25e7abc kernel/vm: change pde table info from single buffer to explicit per-process.
makes code in kernel more readable, and allows better sanity checking on
using the pde info.
2010-05-12 08:31:05 +00:00
Tomas Hruby
57a88ce708 debugging - printing processes on serial
- this patch moves the former printslot() from arch_system.c to
  debug.c and reimplements it slightly. The output is not changed,
  however, the process information is printed in a separate function
  print_proc() in debug.c as such a function is also handy in other
  situations and should be publicly available when debugging.
2010-05-03 17:37:18 +00:00
Kees van Reeuwijk
d106968d77 Remove useless symbol declarations from headers, make symbols local where possible, add some explicit initialization to global variables. 2010-04-22 07:49:40 +00:00