- Remove unused includes.
- Add include guards to headers.
- Use unsigned variables in case they're never going to hold a negative
value. This causes GCC's complaints to disappear and should make flexelint
a lot happier, too.
- Make functions private when they're used only within a module.
- Remove unused variables.
- Add casts where appropriate.
A new call to vm lets processes yield a part of their memory to vm,
together with an id, getting newly allocated memory in return. vm is
allowed to forget about it if it runs out of memory. processes can ask
for it back using the same id. (These two operations are normally
combined in a single call.)
It can be used as a as-big-as-memory-will-allow block cache for
filesystems, which is how mfs now uses it.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET
INET CHANGES:
- INET announces its presence to VFS just like any other driver
RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.
VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.
INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.
DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS.
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.
DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.
KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
UPDATING INFO:
20100317:
/usr/src/etc/system.conf updated to ignore default kernel calls: copy
it (or merge it) to /etc/system.conf.
The hello driver (/dev/hello) added to the distribution:
# cd /usr/src/commands/scripts && make clean install
# cd /dev && MAKEDEV hello
KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.
PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.
SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.
VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().
RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.
DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.
DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
this change
- makes panic() variadic, doing full printf() formatting -
no more NO_NUM, and no more separate printf() statements
needed to print extra info (or something in hex) before panicing
- unifies panic() - same panic() name and usage for everyone -
vm, kernel and rest have different names/syntax currently
in order to implement their own luxuries, but no longer
- throws out the 1st argument, to make source less noisy.
the panic() in syslib retrieves the server name from the kernel
so it should be clear enough who is panicing; e.g.
panic("sigaction failed: %d", errno);
looks like:
at_wini(73130): panic: sigaction failed: 0
syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
- throws out report() - printf() is more convenient and powerful
- harmonizes/fixes the use of panic() - there were a few places
that used printf-style formatting (didn't work) and newlines
(messes up the formatting) in panic()
- throws out a few per-server panic() functions
- cleans up a tie-in of tty with panic()
merging printf() and panic() statements to be done incrementally.
- VFS: check for negative sizes in all truncate calls
- VFS: update file size after truncating with fcntl(F_FREESP)
- VFS: move pos/len checks for F_FREESP with l_len!=0 from FS to VFS
- MFS: do not zero data block for small files when fully truncating
- MFS: do not write out freed indirect blocks after freeing space
- MFS: make truncate work correctly with differing zone/block sizes
- tests: add new test50 for truncate call family
- Make open(2) more POSIX compliant
- Add a test case for dangling symlinks and open() syscall with O_CREAT and
O_EXCL on a symlink.
- Update open(2) man page to reflect change.
Main changes:
- COW optimization for safecopy.
- safemap, a grant-based interface for sharing memory regions between processes.
- Integration with safemap and complete rework of DS, supporting new data types
natively (labels, memory ranges, memory mapped ranges).
- For further information:
http://wiki.minix3.org/en/SummerOfCode2009/MemoryGrants
Additional changes not included in the original Wu's branch:
- Fixed unhandled case in VM when using COW optimization for safecopy in case
of a block that has already been shared as SMAP.
- Better interface and naming scheme for sys_saferevmap and ds_retrieve_map
calls.
- Better input checking in syslib: check for page alignment when creating
memory mapping grants.
- DS notifies subscribers when an entry is deleted.
- Documented the behavior of indirect grants in case of memory mapping.
- Test suite in /usr/src/test/safeperf|safecopy|safemap|ds/* reworked
and extended.
- Minor fixes and general cleanup.
- TO-DO: Grant ids should be generated and managed the way endpoints are to make
sure grant slots are never misreused.
SYSLIB CHANGES:
- SEF framework now supports a new SEF Init request type from RS. 3 different
callbacks are available (init_fresh, init_lu, init_restart) to specify
initialization code when a service starts fresh, starts after a live update,
or restarts.
SYSTEM SERVICE CHANGES:
- Initialization code for system services is now enclosed in a callback SEF will
automatically call at init time. The return code of the callback will
tell RS whether the initialization completed successfully.
- Each init callback can access information passed by RS to initialize. As of
now, each system service has access to the public entries of RS's system process
table to gather all the information required to initialize. This design
eliminates many existing or potential races at boot time and provides a uniform
initialization interface to system services. The same interface will be reused
for the upcoming publish/subscribe model to handle dynamic
registration / deregistration of system services.
VM CHANGES:
- Uniform privilege management for all system services. Every service uses the
same call mask format. For boot services, VM copies the call mask from init
data. For dynamic services, VM still receives the call mask via rs_set_priv
call that will be soon replaced by the upcoming publish/subscribe model.
RS CHANGES:
- The system process table has been reorganized and split into private entries
and public entries. Only the latter ones are exposed to system services.
- VM call masks are now entirely configured in rs/table.c
- RS has now its own slot in the system process table. Only kernel tasks and
user processes not included in the boot image are now left out from the system
process table.
- RS implements the initialization protocol for system services.
- For services in the boot image, RS blocks till initialization is complete and
panics when failure is reported back. Services are initialized in their order of
appearance in the boot image priv table and RS blocks to implements synchronous
initialization for every system service having the flag SF_SYNCH_BOOT set.
- For services started dynamically, the initialization protocol is implemented
as though it were the first ping for the service. In this case, if the
system service fails to report back (or reports failure), RS brings the service
down rather than trying to restart it.
SYSLIB CHANGES:
- SEF must be used by every system process and is thereby part of the system
library.
- The framework provides a receive() interface (sef_receive) for system
processes to automatically catch known system even messages and process them.
- SEF provides a default behavior for each type of system event, but allows
system processes to register callbacks to override the default behavior.
- Custom (local to the process) or predefined (provided by SEF) callback
implementations can be registered to SEF.
- SEF currently includes support for 2 types of system events:
1. SEF Ping. The event occurs every time RS sends a ping to figure out
whether a system process is still alive. The default callback implementation
provided by SEF is to notify RS back to let it know the process is alive
and kicking.
2. SEF Live update. The event occurs every time RS sends a prepare to update
message to let a system process know an update is available and to prepare
for it. The live update support is very basic for now. SEF only deals with
verifying if the prepare state can be supported by the process, dumping the
state for debugging purposes, and providing an event-driven programming
model to the process to react to state changes check-in when ready to update.
- SEF should be extended in the future to integrate support for more types of
system events. Ideally, all the cross-cutting concerns should be integrated into
SEF to avoid duplicating code and ease extensibility. Examples include:
* PM notify messages primarily used at shutdown.
* SYSTEM notify messages primarily used for signals.
* CLOCK notify messages used for system alarms.
* Debug messages. IS could still be in charge of fkey handling but would
forward the debug message to the target process (e.g. PM, if the user
requested debug information about PM). SEF would then catch the message and
do nothing unless the process has registered an appropriate callback to
deal with the event. This simplifies the programming model to print debug
information, avoids duplicating code, and reduces the effort to print
debug information.
SYSTEM PROCESSES CHANGES:
- Every system process registers SEF callbacks it needs to override the default
system behavior and calls sef_startup() right after being started.
- sef_startup() does almost nothing now, but will be extended in the future to
support callbacks of its own to let RS control and synchronize with every
system process at initialization time.
- Every system process calls sef_receive() now rather than receive() directly,
to let SEF handle predefined system events.
RS CHANGES:
- RS supports a basic single-component live update protocol now, as follows:
* When an update command is issued (via "service update *"), RS notifies the
target system process to prepare for a specific update state.
* If the process doesn't respond back in time, the update is aborted.
* When the process responds back, RS kills it and marks it for refreshing.
* The process is then automatically restarted as for a buggy process and can
start running again.
* Live update is currently prototyped as a controlled failure.
- MFS, df(1), fsck(1), badblocks(8), de(1x) now compute the
superblock's s_firstdatazone value if the on-disk value is zero
- mkfs(1) sets s_firstdatazone in the superblock to zero if the
on-disk field is too small to store the actual value
- more agressive mkfs(1) inode number heuristic, copied from r5261
- Revise VFS-FS protocol and update VFS/MFS/ISOFS accordingly.
- Clean up MFS by removing old, dead code (backwards compatibility is broken by
the new VFS-FS protocol, anyway) and rewrite other parts. Also, make sure all
functions have proper banners and prototypes.
- VFS should always provide a (syntactically) valid path to the FS; no need for
the FS to do sanity checks when leaving/entering mount points.
- Fix several bugs in MFS:
- Several path lookup bugs in MFS.
- A link can be too big for the path buffer.
- A mountpoint can become inaccessible when the creation of a new inode
fails, because the inode already exists and is a mountpoint.
- Introduce support for supplemental groups.
- Add test 46 to test supplemental group functionality (and removed obsolete
suppl. tests from test 2).
- Clean up VFS (not everything is done yet).
- ISOFS now opens device read-only. This makes the -r flag in the mount command
unnecessary (but will still report to be mounted read-write).
- Introduce PipeFS. PipeFS is a new FS that handles all anonymous and
named pipes. However, named pipes still reside on the (M)FS, as they are part
of the file system on disk. To make this work VFS now has a concept of
'mapped' inodes, which causes read, write, truncate and stat requests to be
redirected to the mapped FS, and all other requests to the original FS.
- fixes a problem in inodes truct definitions. The original definitions use
posix types. These types don't have well defined size. Therefore when
compiling mkfs on a different system natively the inodes sizes do not match.
This patch replaces the posix types with interger types of the same size and
signedness as the original types in use.
- MFS and mkfs(1) now perform extra sanity checks
- fsck(1) can now deal with inode tables extending beyond the file
system's first 4GB
- badblocks(8) no longer writes out the superblock for no reason
- mkfs(1) no longer crashes when given no parameters
- more(1) no longer crashes when standard output is redirected
- If allocation of a new buffer fails, use an already-allocated
unused buffer if available (low memory conditions)
- Allocate buffers dynamically, so memory isn't wasted on wrong-sized
buffers.
- No more _MAX_BLOCK_SIZE.
