Commit graph

95 commits

Author SHA1 Message Date
David van Moolenbroek
760f3d62d7 PTY: split off from TTY
Requires recreation of /dev/tty[pq]*, /dev/pty[pq]* device nodes.

Change-Id: I0e5a28d82faa934497fd3b97d619e506bcb5f439
2014-07-28 17:05:12 +02:00
Ben Gras
a06e2ab395 big <utmp.h>-inspired netbsd switch
import/switch of:
init, getty, reboot, halt, shutdown, wall, last

changes:
	. change reboot() call to netbsd prototype and args
	. allows pristine <utmp.h>
	. use clean <sys/reboot.h> instead of <minix/reboot.h>
	. implement TIOCSCTTY for use by getty so getty can get
	  controlling terminal from init's child(ren)
	. allow NULL envp for exec

Change-Id: I5ca02cb4230857140c08794bbfeba7df982c58a3
2014-03-01 09:05:02 +01:00
David van Moolenbroek
b003ed0929 UDS: split off from PFS
Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263
2014-03-01 09:04:57 +01:00
David van Moolenbroek
36ac0dbcf8 Take LOG out of the boot image
Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949
2014-03-01 09:04:55 +01:00
David van Moolenbroek
665198b4c2 Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.

Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
2014-03-01 09:04:52 +01:00
David van Moolenbroek
6331e8f845 Retire the synchronous character driver protocol
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.

Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
2014-02-18 11:25:02 +01:00
Kees Jongenburger
df28b6a5c0 arm-refactor:use sysenv board to determine what driver to start.
Change-Id: Ib2f273a4ff666a7417a13e39be0b89075f61c31b
2014-01-20 09:33:41 +01:00
Thomas Cort
e7855d00ef rc: start drivers for attached BeagleBone Capes
BeagleBone Capes add additional hardware to the BeagleBone to
improve functionality.

This patch probes the third i2c bus for capes and loads the
appropriate drivers for each detected cape. Currently only
the 'BeagleBone Weather' cape is supported.

Change-Id: Id8c133810db6de7c21625c2d5a794b8874673a0f
2013-08-22 16:54:10 -04:00
Thomas Cort
26f14d6b5d fb: auto-configure with EDID
Use EDID when available to configure the frame buffer driver with
good settings for the attached display.

Change-Id: I69a78155a93e55ffa1ca3ff6621a879a56cdbceb
2013-08-11 20:37:16 +02:00
Thomas Cort
039c8db774 readclock.drv: add support for the TPS65950 RTC
On the BeagleBoard-xM, the RTC is located on the Power Management IC
(PMIC). To keep things consistent, access to the PMIC's RTC is done
through the readclock driver. The readclock driver forwards the request
on to the TPS65950 driver which does the work of manipulating the
registers on the chip.

Change-Id: I53cefbb59c5a9ab87fab90df3cc1a75a6e430f58
2013-08-09 12:41:58 +02:00
Thomas Cort
bab2a34e1b tps65950: driver for the TPS65950 PMIC
Change-Id: I6b6163e59233d1f823f03550b949d53e1738a7f4
2013-08-09 12:41:43 +02:00
Thomas Cort
d9b62047f1 tps65217: driver for the TPS65217 PMIC
Change-Id: Ic2259c15645816627d757c9c45560cb4c5c0156c
2013-08-05 10:22:59 -04:00
Thomas Cort
1b78e86fb8 tda19988: driver for the TDA19988 HDMI Transmitter
Change-Id: Ia7750df3dd4ec4bd68624c800a0241c70eea7ca4
2013-07-29 12:38:01 -04:00
Thomas Cort
fdbede5dcf eepromread: simple program to view eeprom contents
This program uses the i2c /dev interface to read the
contents of EEPROMs and display it to the user in
HEX and ASCII. It also has a mode that can display
data in label:value pairs. That mode is used for
board detection in the rc script to start the right
i2c drivers for the board.

Change-Id: I0bf5b13ffab5a89533c762d6881a145cf7f14914
2013-07-15 17:03:18 -04:00
Thomas Cort
550fdfb443 i2c: initial bus drivers for am335x and dm37xx
Change-Id: I478704fbf30dbf6d3382bcbfb11e75b512c032a1
2013-07-15 11:11:13 -04:00
Ben Gras
5acaa0814f kernel, ramdisk: some boot unification
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.

This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.

	. ramdisk: remove some arm-only utilities only used for running
	  from the shell
	. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
	  boot-time ramdisk files
	. change kernel to add "arch" variable so userland knows what
	  we're running on from sysenv
	. make ARM use the regular ramdisk rc file, changed to distinguish
	  i386-only and ARM-only drivers; requires rootdevname to be set
	. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
	  i386 systems
	. change the kernel/arm to have a special case for the memory
	  driver to load it higher so it can be bigger
	. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
	  SD preparation script arm_sdimage.sh to the git repository in
	  releasetools/

Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
2013-03-07 14:29:27 +00:00
Thomas Veerman
d9f4f71916 Implement dynamic mtab support
With this patch /etc/mtab becomes obsolete.
2012-11-26 15:20:18 +00:00
pikpik
be81e4ec74 daily: makewhatis -f
. use a little less memory and the processor will be
	  freer during start-up.
2012-09-27 23:12:14 +02:00
Kees Jongenburger
ace9a62765 Include bsd.own.mk in /usr/Makefile to have INSTALL_DIR defined. 2012-06-20 14:52:29 +02:00
Thomas Veerman
6759b24c57 /etc/rc: use mount -a instead of manual parsing
The rc script manually parses /etc/fstab to mount all file systems.
To do that it needs /bin/sed which does not exist anymore. mount(8)
now supports the -a flag which causes it to mount all file systems
listed in /etc/fstab except for '/'. File systems marked with 'noauto'
are skipped.
2012-06-20 10:48:38 +00:00
Thomas Veerman
d1301b26b3 Use buildsystem commands instead of {cp,mkdir} 2012-06-18 10:53:33 +00:00
Ben Gras
2720b68f1b daily cron: fix timestamp updating
. previously was not updated causing daily to be run on
	  every boot
2012-04-19 16:57:58 +02:00
Tomas Hruby
fb31513b00 LWIP,NETSOCK - lwip uses asynchronous protocol
- libnetsock - internal implementation of a socket on the lwip
  server side. it encapsulates the asynchronous protocol

- lwip server - uses libnetsock to work with the asynchronous
  protocol
2012-03-02 15:44:48 +00:00
Ben Gras
35abd4867a silence makewhatis in daily script 2012-02-10 17:25:48 +01:00
Thomas Veerman
e257c999b8 Replace rm and rmdir with NetBSD version 2012-01-16 10:46:14 +00:00
Ben Gras
a03f679e88 Don't run package rc's when booting from cd. 2011-11-28 14:32:18 +01:00
David van Moolenbroek
0aa01a2dce Add vbox -- VirtualBox time sync driver
Sets time forward to match the host time.

Started automatically if the corresponding device is present.
2011-11-23 18:15:43 +01:00
Ben Gras
349a158056 base system hooks for pkgsrc drivers
. rc script and service know to look in /usr/pkg/.. for
	  extra binaries and conf files
	. service split into parsing config and doing RS request
	  so that a new utility (printconfig) can just print the
	  config in machine-parseable format for netconf integration
	. converted all base system eth drivers/netconf
2011-11-16 16:18:21 +01:00
Ben Gras
cedeabb357 mainstream-format fstab format
. detect both formats in /etc/rc
	. generate new format in setup
	. obsoletes /etc/fstab.local: everything can go in /etc/fstab
	. put shutdown/reboot/halt and a copy of /usr/adm/wtmp
	  (/etc/wtmp) on root FS so that we can do shutdown checks before
	  mounting /usr
	. new fstab format makes getfsent() and friends work
2011-11-14 14:47:28 +00:00
Ben Gras
3fbb50397c stopgap local fstab
. /etc/fstab.local to list user-defined filesystems
	. /usr/etc/rc reads it and runs type-specific fsck if necessary
	. also type-specific mount
2011-11-07 20:37:12 +01:00
Ben Gras
0c3983b25a update/fix manpage support
. add bsd-style MLINKS to minix man set, restoring aliases
	  (e.g. man add64 -> int64)
	. update daily cron script to run makewhatis and restore makewhatis
	  in man Makefile (makedb), restores functionality of man -k
	. netbsd imports of man, mdocml, makewhatis, libutil, apropos
	. update man.conf with manpage locations, restoring man [-s] <section>
	. throws out some obsolete manpages
2011-09-28 15:24:15 +00:00
Ben Gras
f789fee254 import netbsd sed
. speeds up mkdep (i.e. world builds) significantly
	. have to keep minix /bin/sed for a while because previous
	  usr/etc/rc depends on it
	. force mkdep to use /usr/bin/sed for speedup
2011-07-20 15:14:48 +02:00
Tomas Hruby
0039e02339 LWIP - scripts
This changes to the boot scripts allow switching to lwip simply by
setting lwip=yes  in the boot monitor.
2011-04-07 07:44:23 +00:00
Ben Gras
341f8682f2 usr/Makefile: added missing sh minibootstrap.sh 2011-02-10 17:00:02 +00:00
Ben Gras
9ef5859996 take pkgsrc.conf out of the base system.
. use bmake for pkgsrc instead, reads mk.conf from /usr/pkg/etc/mk.conf
  . tracking bmake from pkgsrc eases tracking pkgsrc
  . further disentangles pkgsrc from base system, reducing maintenance
    burden of pkgsrc
2011-02-10 15:05:18 +00:00
Ben Gras
914cdb5997 /usr/Makefile - automatically update pkgin database too. 2011-01-31 16:53:53 +00:00
Ben Gras
06aab2c6ed /usr/Makefile - automatically install git 2011-01-31 00:58:50 +00:00
Arun Thomas
41ae712b50 pkgsrc: Update git repo info 2010-11-23 11:12:06 +00:00
Ben Gras
9ce3961b8e mtree: drop /usr/local, add some pkgsrc dirs; /usr/etc/rc: pkgsrc rc.d 2010-08-03 11:18:18 +00:00
Arun Thomas
13be76efe5 Makefile for pkgsrc repo update/checkout
-From DragonflyBSD with minor tweaks
2010-07-20 17:09:44 +00:00
Cristiano Giuffrida
3de6a807ce Configure settings for system services dynamically with the new service edit command. 2010-07-05 19:37:08 +00:00
David van Moolenbroek
9a37f63263 netconf: psip0 is not a driver (Bug#500, reported by Roman Ignatov) 2010-07-02 11:22:42 +00:00
David van Moolenbroek
9ba65d2ea8 This patch switches the MINIX3 ethernet driver stack from a port-based
model to an instance-based model. Each ethernet driver instance is now
responsible for exactly one network interface card. The port field in
/etc/inet.conf now acts as an instance field instead.

This patch also updates the data link protocol. This update:
- eliminates the concept of ports entirely;
- eliminates DL_GETNAME entirely;
- standardizes on using m_source for IPC and DL_ENDPT for safecopies;
- removes error codes from TASK/STAT replies, as they were unused;
- removes a number of other old or unused fields;
- names and renames a few other fields.

All ethernet drivers have been changed to:
- conform to the new protocol, and exactly that;
- take on an instance number based on a given "instance" argument;
- skip that number of PCI devices in probe iterations;
- use config tables and environment variables based on that number;
- no longer be limited to a predefined maximum of cards in any way;
- get rid of any leftover non-safecopy support and other ancient junk;
- have a correct banner protocol figure, or none at all.

Other changes:
* Inet.conf is now taken to be line-based, and supports #-comments.
  No existing installations are expected to be affected by this.
* A new, select-based asynchio library replaces the old one.
  Kindly contributed by Kees J. Bot.
* Inet now supports use of select() on IP devices.
  Combined, the last two changes together speed up dhcpd
  considerably in the presence of multiple interfaces.
* A small bug has been fixed in nonamed.
2010-05-17 22:22:53 +00:00
Cristiano Giuffrida
5a98cd3e92 Fix Inet initialization race. 2010-05-06 22:18:21 +00:00
Cristiano Giuffrida
65ef539739 Driver mapping refactory.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET

INET CHANGES:
- INET announces its presence to VFS just like any other driver

RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
2010-04-09 21:56:44 +00:00
Cristiano Giuffrida
48c6bb79f4 Driver refactory for live update and crash recovery.
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.

VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.

INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.

DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS. 
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.

DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.

KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
2010-04-08 13:41:35 +00:00
Ben Gras
76f8132545 dec21140A ethernet driver for virtualpc, contributed by nicolas tittley. 2010-01-26 10:20:18 +00:00
David van Moolenbroek
1489f14b37 Driver for Attansic L2 FastEthernet (atl2) 2009-12-30 22:42:44 +00:00
Ben Gras
26ba254a4a Intel Pro/1000 driver written by Niek Linnenbank. 2009-12-07 18:33:41 +00:00
Ben Gras
207621b6fb rtl8169 driver contributed by Jaswinder Singh Rajput. 2009-12-02 15:59:42 +00:00