Commit graph

104 commits

Author SHA1 Message Date
Jean-Baptiste Boric
69eead77ff New image framework generation
The CD now boots directly from the ISO 9660 filesystem instead of using
MBR partitioning with Minix file systems. This saves some space on the
CD and reduces memory requirements by some unknown amount as the root
ramdisk is completely eliminated.

The x86 hard drive image creation is also rewritten in the same
fashion.

The setup is modified to be more NetBSD-like (unpacking sets
tarballs instead of blindly copying the CD contents). Splitting MINIX
into sets is done in another commit due to it being a nightmare to
rebase.

Since MINIX lacks union mounts for now, a bunch of ramdisks are
generated at run-time to make parts of the filesystem writeable for the
CD. This solution isn't ideal, but it's enough for an installation CD.

Change-Id: Icbd9cca4dafebf7b42c345b107a17679a622d5cd
2015-10-10 19:09:35 +02:00
David van Moolenbroek
da21d85025 Add PTYFS, Unix98 pseudo terminal support
This patch adds support for Unix98 pseudo terminals, that is,
posix_openpt(3), grantpt(3), unlockpt(3), /dev/ptmx, and /dev/pts/.
The latter is implemented with a new pseudo file system, PTYFS.

In effect, this patch adds secure support for unprivileged pseudo
terminal allocation, allowing programs such as tmux(1) to be used by
non-root users as well.  Test77 has been extended with new tests, and
no longer needs to run as root.

The new functionality is optional.  To revert to the old behavior,
remove the "ptyfs" entry from /etc/fstab.

Technical nodes:

o The reason for not implementing the NetBSD /dev/ptm approach is that
  implementing the corresponding ioctl (TIOCPTMGET) would require
  adding a number of extremely hairy exceptions to VFS, including the
  PTY driver having to create new file descriptors for its own device
  nodes.

o PTYFS is required for Unix98 PTYs in order to avoid that the PTY
  driver has to be aware of old-style PTY naming schemes and even has
  to call chmod(2) on a disk-backed file system.  PTY cannot be its
  own PTYFS since a character driver may currently not also be a file
  system.  However, PTYFS may be subsumed into a DEVFS in the future.

o The Unix98 PTY behavior differs somewhat from NetBSD's, in that
  slave nodes are created on ptyfs only upon the first call to
  grantpt(3).  This approach obviates the need to revoke access as
  part of the grantpt(3) call.

o Shutting down PTY may leave slave nodes on PTYFS, but once PTY is
  restarted, these leftover slave nodes will be removed before they
  create a security risk.  Unmounting PTYFS will make existing PTY
  slaves permanently unavailable, and absence of PTYFS will block
  allocation of new Unix98 PTYs until PTYFS is (re)mounted.

Change-Id: I822b43ba32707c8815fd0f7d5bb7a438f51421c1
2015-06-23 17:43:46 +00:00
David van Moolenbroek
cb796b7551 etc/usr/rc: fix argument passing for net drivers
The expected argument name would include the instance number, which
is not only redundant in many cases (FOOETHn_n=arg.., "n" being the
instance number) and conflicted with what netconf(8) does, but some
drivers need to be able to see the arguments for all instances of its
driver type--for example, dp8390 needs to know how many earlier
instances have been configured to use PCI.

Change-Id: I4830b823352722f554a032979464aba8b08fc166
2014-12-04 12:10:46 +00:00
Lionel Sambuc
9e77ef5013 Enhancing /proc/pci
- Adding missing fields for PCI device lookup
 - Adding the domain (for now set to zero) as part of the slot name

Change-Id: Iebaf3b21f6ab5024738cbc1dea66d5ad3ada175d
2014-11-10 14:43:27 +01:00
Lionel Sambuc
684b2eb975 /usr/Makefile: prevent pkgin from hanging
Change-Id: Ida6086f3c2d3300609aaebb931d094fd779c73ea
2014-09-12 11:07:33 +02:00
David van Moolenbroek
e60f57aa30 rc: update (unused) default service directory
Change-Id: I62f838a47ef92975ef88319fffd94f83814fef49
2014-09-09 10:04:31 -04:00
Lionel Sambuc
29271eabe4 Update usr/Makefile
- This improves the user messages.

 - This update the pkgsrc checkout rules to point to the new repository,
   as well as the new work process we are introducing.

 - This introduces rules for the MINIX sources, as we don't have the
   space anymore to distribute them by default on the official ISO.

Change-Id: Id1867286bd15efc46bad1d906c1ca1b3a883b064
2014-08-14 19:02:53 +02:00
Lionel Sambuc
8edaaa301c Services move to /service fixes
- Fix init rights not adjusted at boot time

 - Fix usbd not loaded on BBB / BBW

Change-Id: Ic690547876d486165e74c749a4fe43891d0e1e8d
2014-08-08 17:56:05 +02:00
Kees Jongenburger
489a81f55d arm:if present start usbd
Change-Id: Ide4079b993f9525d09a6a42dfb09b958dc546942

http://gerrit.minix3.org/#/c/2695/
2014-07-28 17:05:40 +02:00
David van Moolenbroek
760f3d62d7 PTY: split off from TTY
Requires recreation of /dev/tty[pq]*, /dev/pty[pq]* device nodes.

Change-Id: I0e5a28d82faa934497fd3b97d619e506bcb5f439
2014-07-28 17:05:12 +02:00
Ben Gras
a06e2ab395 big <utmp.h>-inspired netbsd switch
import/switch of:
init, getty, reboot, halt, shutdown, wall, last

changes:
	. change reboot() call to netbsd prototype and args
	. allows pristine <utmp.h>
	. use clean <sys/reboot.h> instead of <minix/reboot.h>
	. implement TIOCSCTTY for use by getty so getty can get
	  controlling terminal from init's child(ren)
	. allow NULL envp for exec

Change-Id: I5ca02cb4230857140c08794bbfeba7df982c58a3
2014-03-01 09:05:02 +01:00
David van Moolenbroek
b003ed0929 UDS: split off from PFS
Change-Id: I769cbd64aa6e5e85a797caf0f8bbb4c20e145263
2014-03-01 09:04:57 +01:00
David van Moolenbroek
36ac0dbcf8 Take LOG out of the boot image
Change-Id: Id2629776b53aae46629b04a42c15cbbacac9b949
2014-03-01 09:04:55 +01:00
David van Moolenbroek
665198b4c2 Rewrite character driver protocol
As a side effect, remove the clone style, as the normal device style
supports device cloning now.

Change-Id: Ie82d1ef0385514a04a8faa139129a617895780b5
2014-03-01 09:04:52 +01:00
David van Moolenbroek
6331e8f845 Retire the synchronous character driver protocol
- change all sync char drivers into async drivers;
- retire support for the sync protocol in libchardev;
- remove async dev style, as this is now the default;
- remove dev_status from VFS;
- clean up now-unused protocol messages.

Change-Id: I6aacff712292f6b29f2ccd51bc1e7d7003723e87
2014-02-18 11:25:02 +01:00
Kees Jongenburger
df28b6a5c0 arm-refactor:use sysenv board to determine what driver to start.
Change-Id: Ib2f273a4ff666a7417a13e39be0b89075f61c31b
2014-01-20 09:33:41 +01:00
Thomas Cort
e7855d00ef rc: start drivers for attached BeagleBone Capes
BeagleBone Capes add additional hardware to the BeagleBone to
improve functionality.

This patch probes the third i2c bus for capes and loads the
appropriate drivers for each detected cape. Currently only
the 'BeagleBone Weather' cape is supported.

Change-Id: Id8c133810db6de7c21625c2d5a794b8874673a0f
2013-08-22 16:54:10 -04:00
Thomas Cort
26f14d6b5d fb: auto-configure with EDID
Use EDID when available to configure the frame buffer driver with
good settings for the attached display.

Change-Id: I69a78155a93e55ffa1ca3ff6621a879a56cdbceb
2013-08-11 20:37:16 +02:00
Thomas Cort
039c8db774 readclock.drv: add support for the TPS65950 RTC
On the BeagleBoard-xM, the RTC is located on the Power Management IC
(PMIC). To keep things consistent, access to the PMIC's RTC is done
through the readclock driver. The readclock driver forwards the request
on to the TPS65950 driver which does the work of manipulating the
registers on the chip.

Change-Id: I53cefbb59c5a9ab87fab90df3cc1a75a6e430f58
2013-08-09 12:41:58 +02:00
Thomas Cort
bab2a34e1b tps65950: driver for the TPS65950 PMIC
Change-Id: I6b6163e59233d1f823f03550b949d53e1738a7f4
2013-08-09 12:41:43 +02:00
Thomas Cort
d9b62047f1 tps65217: driver for the TPS65217 PMIC
Change-Id: Ic2259c15645816627d757c9c45560cb4c5c0156c
2013-08-05 10:22:59 -04:00
Thomas Cort
1b78e86fb8 tda19988: driver for the TDA19988 HDMI Transmitter
Change-Id: Ia7750df3dd4ec4bd68624c800a0241c70eea7ca4
2013-07-29 12:38:01 -04:00
Thomas Cort
fdbede5dcf eepromread: simple program to view eeprom contents
This program uses the i2c /dev interface to read the
contents of EEPROMs and display it to the user in
HEX and ASCII. It also has a mode that can display
data in label:value pairs. That mode is used for
board detection in the rc script to start the right
i2c drivers for the board.

Change-Id: I0bf5b13ffab5a89533c762d6881a145cf7f14914
2013-07-15 17:03:18 -04:00
Thomas Cort
550fdfb443 i2c: initial bus drivers for am335x and dm37xx
Change-Id: I478704fbf30dbf6d3382bcbfb11e75b512c032a1
2013-07-15 11:11:13 -04:00
Ben Gras
5acaa0814f kernel, ramdisk: some boot unification
To use the new SD building script, Linux has to be configured with
loop.max_part=15 on the command line (or set at module load time)
to make the loopback device see the partitions.

This commit removes a lot of differences between the ARM and x86
boot ramdisk and rc scripts. It changes the ARM build from running
from ramdisk to requiring a full filesystem on the SD image and
booting into it.

	. ramdisk: remove some arm-only utilities only used for running
	  from the shell
	. remove ARM-only rc.arm, proto.arm.small, ttys and mylogin.sh
	  boot-time ramdisk files
	. change kernel to add "arch" variable so userland knows what
	  we're running on from sysenv
	. make ARM use the regular ramdisk rc file, changed to distinguish
	  i386-only and ARM-only drivers; requires rootdevname to be set
	. change /etc/rc and /usr/etc/rc to start i386-only drivers only on
	  i386 systems
	. change the kernel/arm to have a special case for the memory
	  driver to load it higher so it can be bigger
	. add uEnv.txt, cmdline.txt and a for now highly linux-dependent
	  SD preparation script arm_sdimage.sh to the git repository in
	  releasetools/

Change-Id: I68910ba4e96ee80f7a12b65e48b5d39b43ca6397
2013-03-07 14:29:27 +00:00
Thomas Veerman
d9f4f71916 Implement dynamic mtab support
With this patch /etc/mtab becomes obsolete.
2012-11-26 15:20:18 +00:00
pikpik
be81e4ec74 daily: makewhatis -f
. use a little less memory and the processor will be
	  freer during start-up.
2012-09-27 23:12:14 +02:00
Kees Jongenburger
ace9a62765 Include bsd.own.mk in /usr/Makefile to have INSTALL_DIR defined. 2012-06-20 14:52:29 +02:00
Thomas Veerman
6759b24c57 /etc/rc: use mount -a instead of manual parsing
The rc script manually parses /etc/fstab to mount all file systems.
To do that it needs /bin/sed which does not exist anymore. mount(8)
now supports the -a flag which causes it to mount all file systems
listed in /etc/fstab except for '/'. File systems marked with 'noauto'
are skipped.
2012-06-20 10:48:38 +00:00
Thomas Veerman
d1301b26b3 Use buildsystem commands instead of {cp,mkdir} 2012-06-18 10:53:33 +00:00
Ben Gras
2720b68f1b daily cron: fix timestamp updating
. previously was not updated causing daily to be run on
	  every boot
2012-04-19 16:57:58 +02:00
Tomas Hruby
fb31513b00 LWIP,NETSOCK - lwip uses asynchronous protocol
- libnetsock - internal implementation of a socket on the lwip
  server side. it encapsulates the asynchronous protocol

- lwip server - uses libnetsock to work with the asynchronous
  protocol
2012-03-02 15:44:48 +00:00
Ben Gras
35abd4867a silence makewhatis in daily script 2012-02-10 17:25:48 +01:00
Thomas Veerman
e257c999b8 Replace rm and rmdir with NetBSD version 2012-01-16 10:46:14 +00:00
Ben Gras
a03f679e88 Don't run package rc's when booting from cd. 2011-11-28 14:32:18 +01:00
David van Moolenbroek
0aa01a2dce Add vbox -- VirtualBox time sync driver
Sets time forward to match the host time.

Started automatically if the corresponding device is present.
2011-11-23 18:15:43 +01:00
Ben Gras
349a158056 base system hooks for pkgsrc drivers
. rc script and service know to look in /usr/pkg/.. for
	  extra binaries and conf files
	. service split into parsing config and doing RS request
	  so that a new utility (printconfig) can just print the
	  config in machine-parseable format for netconf integration
	. converted all base system eth drivers/netconf
2011-11-16 16:18:21 +01:00
Ben Gras
cedeabb357 mainstream-format fstab format
. detect both formats in /etc/rc
	. generate new format in setup
	. obsoletes /etc/fstab.local: everything can go in /etc/fstab
	. put shutdown/reboot/halt and a copy of /usr/adm/wtmp
	  (/etc/wtmp) on root FS so that we can do shutdown checks before
	  mounting /usr
	. new fstab format makes getfsent() and friends work
2011-11-14 14:47:28 +00:00
Ben Gras
3fbb50397c stopgap local fstab
. /etc/fstab.local to list user-defined filesystems
	. /usr/etc/rc reads it and runs type-specific fsck if necessary
	. also type-specific mount
2011-11-07 20:37:12 +01:00
Ben Gras
0c3983b25a update/fix manpage support
. add bsd-style MLINKS to minix man set, restoring aliases
	  (e.g. man add64 -> int64)
	. update daily cron script to run makewhatis and restore makewhatis
	  in man Makefile (makedb), restores functionality of man -k
	. netbsd imports of man, mdocml, makewhatis, libutil, apropos
	. update man.conf with manpage locations, restoring man [-s] <section>
	. throws out some obsolete manpages
2011-09-28 15:24:15 +00:00
Ben Gras
f789fee254 import netbsd sed
. speeds up mkdep (i.e. world builds) significantly
	. have to keep minix /bin/sed for a while because previous
	  usr/etc/rc depends on it
	. force mkdep to use /usr/bin/sed for speedup
2011-07-20 15:14:48 +02:00
Tomas Hruby
0039e02339 LWIP - scripts
This changes to the boot scripts allow switching to lwip simply by
setting lwip=yes  in the boot monitor.
2011-04-07 07:44:23 +00:00
Ben Gras
341f8682f2 usr/Makefile: added missing sh minibootstrap.sh 2011-02-10 17:00:02 +00:00
Ben Gras
9ef5859996 take pkgsrc.conf out of the base system.
. use bmake for pkgsrc instead, reads mk.conf from /usr/pkg/etc/mk.conf
  . tracking bmake from pkgsrc eases tracking pkgsrc
  . further disentangles pkgsrc from base system, reducing maintenance
    burden of pkgsrc
2011-02-10 15:05:18 +00:00
Ben Gras
914cdb5997 /usr/Makefile - automatically update pkgin database too. 2011-01-31 16:53:53 +00:00
Ben Gras
06aab2c6ed /usr/Makefile - automatically install git 2011-01-31 00:58:50 +00:00
Arun Thomas
41ae712b50 pkgsrc: Update git repo info 2010-11-23 11:12:06 +00:00
Ben Gras
9ce3961b8e mtree: drop /usr/local, add some pkgsrc dirs; /usr/etc/rc: pkgsrc rc.d 2010-08-03 11:18:18 +00:00
Arun Thomas
13be76efe5 Makefile for pkgsrc repo update/checkout
-From DragonflyBSD with minor tweaks
2010-07-20 17:09:44 +00:00
Cristiano Giuffrida
3de6a807ce Configure settings for system services dynamically with the new service edit command. 2010-07-05 19:37:08 +00:00