Commit graph

20 commits

Author SHA1 Message Date
Cristiano Giuffrida
65ef539739 Driver mapping refactory.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET

INET CHANGES:
- INET announces its presence to VFS just like any other driver

RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
2010-04-09 21:56:44 +00:00
Cristiano Giuffrida
48c6bb79f4 Driver refactory for live update and crash recovery.
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.

VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.

INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.

DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS. 
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.

DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.

KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
2010-04-08 13:41:35 +00:00
Arun Thomas
5fd3f34273 Minor docs/UPDATING fix 2010-03-24 13:41:38 +00:00
Arun Thomas
14ca3ea017 Sort docs/UPDATING entries reverse chronologically 2010-03-24 10:13:19 +00:00
Erik van der Kouwe
b42c66ed10 this patch adds access to the debug breakpoints to
the kernel. They are not used atm, but having them in trunk allows them
to be easily used when needed. To set a breakpoint that triggers when
the variable foo is written to (the most common use case), one calls:

breakpoint_set(vir2phys((vir_bytes) &foo), 0,
  BREAKPOINT_FLAG_MODE_GLOBAL |
  BREAKPOINT_FLAG_RW_WRITE |
  BREAKPOINT_FLAG_LEN_4);

It can later be disabled using:

breakpoint_set(vir2phys((vir_bytes) &foo), 0,
  BREAKPOINT_FLAG_MODE_OFF);

There are some limitations:

- There are at most four breakpoints (hardware limit); the index of the
  breakpoint (0-3) is specified as the second parameter of
  breakpoint_set.

- The breakpoint exception in the kernel is not handled and causes a
  panic; it would be reasonably easy to change this by inspecing DR6,
  printing a message, disabling the breakpoint and continuing. However,
  in my experience even just a panic can be very useful.

- Breakpoints can be set only in the part of the address space that is
  in every page table. It is useful for the kernel, but to use this for
  user processes would require saving and restoring the debug registers
  as part of the context switch. Although the CPU provides support for
  local breakpoints (I implemened this as BREAKPOINT_FLAG_LOCAL) they
  only work if task switching is used.
2010-03-19 19:15:20 +00:00
Tomas Hruby
61348227a7 docs/UPDATING correction 2010-03-18 17:00:32 +00:00
Cristiano Giuffrida
cb176df60f New RS and new signal handling for system processes.
UPDATING INFO:
20100317:
        /usr/src/etc/system.conf updated to ignore default kernel calls: copy
        it (or merge it) to /etc/system.conf.
        The hello driver (/dev/hello) added to the distribution:
        # cd /usr/src/commands/scripts && make clean install
        # cd /dev && MAKEDEV hello

KERNEL CHANGES:
- Generic signal handling support. The kernel no longer assumes PM as a signal
manager for every process. The signal manager of a given process can now be
specified in its privilege slot. When a signal has to be delivered, the kernel
performs the lookup and forwards the signal to the appropriate signal manager.
PM is the default signal manager for user processes, RS is the default signal
manager for system processes. To enable ptrace()ing for system processes, it
is sufficient to change the default signal manager to PM. This will temporarily
disable crash recovery, though.
- sys_exit() is now split into sys_exit() (i.e. exit() for system processes,
which generates a self-termination signal), and sys_clear() (i.e. used by PM
to ask the kernel to clear a process slot when a process exits).
- Added a new kernel call (i.e. sys_update()) to swap two process slots and
implement live update.

PM CHANGES:
- Posix signal handling is no longer allowed for system processes. System
signals are split into two fixed categories: termination and non-termination
signals. When a non-termination signaled is processed, PM transforms the signal
into an IPC message and delivers the message to the system process. When a
termination signal is processed, PM terminates the process.
- PM no longer assumes itself as the signal manager for system processes. It now
makes sure that every system signal goes through the kernel before being
actually processes. The kernel will then dispatch the signal to the appropriate
signal manager which may or may not be PM.

SYSLIB CHANGES:
- Simplified SEF init and LU callbacks.
- Added additional predefined SEF callbacks to debug crash recovery and
live update.
- Fixed a temporary ack in the SEF init protocol. SEF init reply is now
completely synchronous.
- Added SEF signal event type to provide a uniform interface for system
processes to deal with signals. A sef_cb_signal_handler() callback is
available for system processes to handle every received signal. A
sef_cb_signal_manager() callback is used by signal managers to process
system signals on behalf of the kernel.
- Fixed a few bugs with memory mapping and DS.

VM CHANGES:
- Page faults and memory requests coming from the kernel are now implemented
using signals.
- Added a new VM call to swap two process slots and implement live update.
- The call is used by RS at update time and in turn invokes the kernel call
sys_update().

RS CHANGES:
- RS has been reworked with a better functional decomposition.
- Better kernel call masks. com.h now defines the set of very basic kernel calls
every system service is allowed to use. This makes system.conf simpler and
easier to maintain. In addition, this guarantees a higher level of isolation
for system libraries that use one or more kernel calls internally (e.g. printf).
- RS is the default signal manager for system processes. By default, RS
intercepts every signal delivered to every system process. This makes crash
recovery possible before bringing PM and friends in the loop.
- RS now supports fast rollback when something goes wrong while initializing
the new version during a live update.
- Live update is now implemented by keeping the two versions side-by-side and
swapping the process slots when the old version is ready to update.
- Crash recovery is now implemented by keeping the two versions side-by-side
and cleaning up the old version only when the recovery process is complete.

DS CHANGES:
- Fixed a bug when the process doing ds_publish() or ds_delete() is not known
by DS.
- Fixed the completely broken support for strings. String publishing is now
implemented in the system library and simply wraps publishing of memory ranges.
Ideally, we should adopt a similar approach for other data types as well.
- Test suite fixed.

DRIVER CHANGES:
- The hello driver has been added to the Minix distribution to demonstrate basic
live update and crash recovery functionalities.
- Other drivers have been adapted to conform the new SEF interface.
2010-03-17 01:15:29 +00:00
Erik van der Kouwe
2ba76cfec6 Minor correction in UPDATING 2010-03-16 08:16:13 +00:00
Arun Thomas
9944688d2b Convert man/ over to new make 2010-03-16 00:15:43 +00:00
Arun Thomas
2a8fabf4ad Include directory reorg and makefile updates.
-Convert the include directory over to using bsdmake
 syntax
-Update/add mkfiles
-Modify install(1) so that it can create symlinks
-Update makefiles to use new install(1) options
-Rename /usr/include/ibm to /usr/include/i386
-Create /usr/include/machine symlink to arch header files
-Move vm_i386.h to its new home in the /usr/include/i386
-Update source files to #include the header files at their
 new homes.
-Add new gnu-includes target for building GCC headers
2010-03-08 11:04:59 +00:00
Arun Thomas
cbd276e4ce Convert library asm files to GAS syntax 2010-03-03 14:27:30 +00:00
Arun Thomas
b706112487 Incorporate bsdmake into buildsystem and reorganize libs 2010-02-16 14:41:33 +00:00
Cristiano Giuffrida
e090013056 Drivers and servers are simply known as services.
/etc CHANGES:
- /etc/drivers.conf has been renamed to /etc/system.conf. Every entry in 
the file is now marked as "service" rather than driver.
- user "service" has been added to password file /etc/passwd.
- docs/UPDATING updated accordingly, as well as every other mention to the old
drivers.conf in the system.

RS CHANGES:
- No more distinction between servers and drivers.
- RS_START has been renamed to RS_UP and the old legacy RS_UP and RS_UP_COPY
dropped.
- RS asks PCI to set / remove ACL entries only for services whose ACL properties
have been set. This change eliminates unnecessary warnings.
- Temporarily minimize the risk of potential races at boot time or when starting
a new service. Upcoming changes will eliminate races completely.
- General cleanup.
2009-12-17 01:53:26 +00:00
Erik van der Kouwe
e9533909ff Report make issue in UPDATING (approved by Ben) 2009-10-06 14:17:13 +00:00
Ben Gras
7606dc5f1f profiling reminder 2009-01-09 16:44:47 +00:00
Ben Gras
d75a1c3f38 Note about mkfs needing more memory after r2751. 2007-02-23 08:33:33 +00:00
Ben Gras
2194bc0310 vfs/mount/rs/service changes:
. changed umount() and mount() to call 'service', so that it can include
   a custom label, so that umount() works again (RS slot gets freed now).
   merged umount() and mount() into one file to encode keep this label
   knowledge in one file.
 . removed obsolete RS_PID field and RS_RESCUE rescue command
 . added label to RS_START struct
 . vfs no longer does kill of fs process on unmount (which was failing
   due to RS_PID request not working)
 . don't assume that if error wasn't one of three errors, that no error
   occured in vfs/request.c
mfs changes:
 . added checks to copy statements to truncate copies at buffer sizes
   (left in debug code for now)
 . added checks for null-terminatedness, if less than NAME_MAX was copied
 . added checks for copy function success
is changes: 
 . dump rs label
drivers.conf changes:
 . added acl for mfs so that mfs can be started with 'service start',
   so that a custom label can be provided
2007-01-22 15:25:41 +00:00
Ben Gras
53a6054b66 arch/i386/include/protect.h is unnecessary; add make.conf to etc/ and
note about it in docs/UPDATING.
2006-12-22 15:48:27 +00:00
Philip Homburg
dac2e8fcc9 More detailed upgrade procedure. 2006-12-22 13:36:18 +00:00
Ben Gras
2f58281a20 New UPDATING file with hints for source updating. 2006-08-18 16:18:54 +00:00