Commit graph

17 commits

Author SHA1 Message Date
Tomas Hruby
ebbc730fc3 spurious and error interrupt apic handlers
- fixed spurious and error interrupt handlers

- not to hog the system the warning isn't reported every time, just
  once every 100 times, similarly for the spurious PIC interrupts
2010-10-19 17:07:21 +00:00
Tomas Hruby
e6b1a30a26 panic in dummy apic handlers
- as panic can do the same as printf now, let's rather panic when a
  dummy apic interrupt vector handler is hit
2010-10-19 17:07:17 +00:00
Tomas Hruby
0ac9b6d4cf SMP - trully idle APs
- any cpu can use smp_schedule() to tell another cpu to reschedule

- if an AP is idle, it turns off timer as there is nothing to
  preempt, no need to wakeup just to go back to sleep again

- if a cpu makes a process runnable on an idle cpu, it must wake it up
  to reschedule
2010-09-15 14:10:57 +00:00
Tomas Hruby
387e1835d1 SMP - BSP halts APs before shutting down 2010-09-15 14:10:54 +00:00
Tomas Hruby
9e12630d75 SMP - APs are fully enabled
- apic_send_ipi() to send inter-processor interrupts (IPIs)

- APIC IPI schedule and halt handlers to signal x-cpu that a cpu shold
  reschedule or halt

- various little changes to let APs run

- no processes are scheduled at the APs and therefore they are idle
  except being interrupted by a timer time to time
2010-09-15 14:10:30 +00:00
Tomas Hruby
b7aed08e65 SMP - Only a single APIC timer handler
- bsp_timer_int_handler() and ap_timer_int_handler() unified into
  timer_int_handler()

- global realtime updated only on BSP
2010-09-15 14:10:09 +00:00
Tomas Hruby
62c666566e SMP - We boot APs
- kernel detects CPUs by searching ACPI tables for local apic nodes

- each CPU has its own TSS that points to its own stack. All cpus boot
  on the same boot stack (in sequence) but switch to its private stack
  as soon as they can.

- final booting code in main() placed in bsp_finish_booting() which is
  executed only after the BSP switches to its final stack

- apic functions to send startup interrupts

- assembler functions to handle CPU features not needed for single cpu
  mode like memory barries, HT detection etc.

- new files kernel/smp.[ch], kernel/arch/i386/arch_smp.c and
  kernel/arch/i386/include/arch_smp.h

- 16-bit trampoline code for the APs. It is executed by each AP after
  receiving startup IPIs it brings up the CPUs to 32bit mode and let
  them spin in an infinite loop so they don't do any damage.

- implementation of kernel spinlock

- CONFIG_SMP and CONFIG_MAX_CPUS set by the build system
2010-09-15 14:09:52 +00:00
Tomas Hruby
e6ebac015d APIC mode uses IO APICs
- kernel turns on IO APICs if no_apic is _not_ set or is equal 0

- pci driver must use the acpi driver to setup IRQ routing otherwise
  the system cannot work correctly except systems like KVM that use
  only legacy (E)ISA IRQs 0-15
2010-09-07 07:18:11 +00:00
Arun Thomas
9a21d1a2fd Macros for symbols used in both ASM and C
-The macros take care of prepending the leading underscore when
 necessary.
2010-08-17 16:44:07 +00:00
Arun Thomas
b0159ad168 Buildsystem changes for GCC
-Makefile updates
-Update mkdep
-Build fixes/warning cleanups for some programs
-Restore leading underscores on global syms in kernel asm files
-Increase ramdisk size
2010-05-19 13:24:15 +00:00
Tomas Hruby
b90c2d7026 rename of mode/context switching functions
- this patch only renames schedcheck() to switch_to_user(),
  cycles_accounting_stop() to context_stop() and restart() to
  +restore_user_context()

- the motivation is that since the introduction of schedcheck() it has
  been abused for many things. It deserves a better name.  It should
  express the fact that from the moment we call the function we are in
  the process of switching to user.

- cycles_accounting_stop() was originally a single purpose function.
  As this function is called at were convenient places it is used in
  for other things too, e.g. (un)locking the kernel. Thus it deserves
  a better name too.

- using the old name, restart() does not call schedcheck(), however
  calls to restart are replaced by calls to schedcheck()
  [switch_to_user] and it calls restart() [restore_user_context]
2010-05-18 13:00:39 +00:00
Tomas Hruby
8451a86f0a Interrupts hadling while idle
- When the cpu halts, the interrupts are enable so the cpu may be
  woken up. When the interrupt handler returns but another interrupt
  is available it is also serviced immediately. This is not a problem
  per-se. It only slightly breaks time accounting as idle accounted is
  for the kernel time in the interrupt handler.
  
  
-  As the big kernel lock is lock/unlocked in the smp branch in the
   time acounting functions as they are called exactly at the places
   we need to take the lock) this leads to a deadlock.

- we make sure that once the interrupt handler returns from the nested
  trap, the interrupts are disabled. This means that only one
  interrupt is serviced after idle is interrupted.

- this requires the loop in apic timer calibration to keep reenabling
  the interrupts. I admit it is a little bit hackish (one line),
  however, this code is a stupid corner case at the boot time.
  Hopefully it does not matter too much.
2010-03-23 13:35:01 +00:00
Arun Thomas
1f9ce647cf Move archtypes.h, fpu.h, and stackframe.h
Move archtypes.h to include/ dir, since several servers require it. Move
fpu.h and stackframe.h to arch-specific header directory. Make source
files and makefiles aware of the new header locations.
2010-03-09 09:41:14 +00:00
Ben Gras
e6cb76a2e2 no more kprintf - kernel uses libsys printf now, only kputc is special
to the kernel.
2010-03-03 15:45:01 +00:00
Arun Thomas
cbd276e4ce Convert library asm files to GAS syntax 2010-03-03 14:27:30 +00:00
Tomas Hruby
1b56fdb33c Time accounting based on TSC
- as thre are still KERNEL and IDLE entries, time accounting for
  kernel and idle time works the same as for any other process

- everytime we stop accounting for the currently running process,
  kernel or idle, we read the TSC counter and increment the p_cycles
  entry.

- the process cycles inherently include some of the kernel cycles as
  we can stop accounting for the process only after we save its
  context and we start accounting just before we restore its context

- this assumes that the system does not scale the CPU frequency which
  will be true for ... long time ;-)
2010-02-10 15:36:54 +00:00
Tomas Hruby
8a44a44cb9 Local APIC
- local APIC timer used as the source of time

- PIC is still used as the hw interrupt controller as we don't have
  enough info without ACPI or MPS to set up IO APICs

- remapping of APIC when switching paging on, uses the new mechanism
  to tell VM what phys areas to map in kernel's virtual space

- one more step to SMP

based on code by Arun C.
2009-11-16 21:41:44 +00:00