The main motivation for this change is that only Loris supports
multithreading, and Loris supports dynamic thread allocation, so the
number of supported threads can be implemented as a bit flag (i.e.,
either 1 or "at least as many as VFS has"). The ABI break obviates the
need to support file system versioning at this time, and several
other aspects are better implemented as flags as well. Other changes:
- replace peek/bpeek test upon mount with FS flag as well;
- mark libsffs as 64-bit file size capable;
- remove old (3.2.1) getdents support.
Change-Id: I313eace9c50ed816656c31cd47d969033d952a03
The memory-mapped files implementation (mmap() etc.) is implemented with
the help of the filesystems using the in-VM FS cache. Filesystems tell it
about all cached blocks and their metadata. Metadata is: device offset and,
if any (and known), inode number and in-inode offset. VM can then map in
requested memory-mapped file blocks, and request them if necessary.
A limitation of this system is that filesystem block sizes that are not
a multiple of the VM system (and VM hardware) page size are not possible;
we can't map blocks in partially. (We can copy, but then the benefits of
mapping and sharing the physical pages is gone.) So until before this
commit various pieces of caching code assumed page size multiple
blocksizes. This isn't strictly necessary as long as mmap() needn't be
supported on that FS.
This change allows the in-FS cache code (libminixfs) to allocate any-sized
blocks, and will not interact with the VM cache for non-pagesize-multiple
blocks. In that case it will also signal requestors, by failing 'peek'
requests, that mmap() should not be supported on this FS. VM and VFS
will then gracefully fail all file-mapping mmap() calls, and exec() will
fall back to copying executable blocks instead of mmap()ping executables.
As a result, 3 diagnostics that signal file-mapped mmap()s failing
(hitherto an unusual occurence) are disabled, as ld.so does file-mapped
mmap()s to map in objects it needs. On FSes not supporting it this situation
is legitimate and shouldn't cause so much noise. ld.so will revert to its own
minix-specific allocate+copy style of starting executables if mmap()s fail.
Change-Id: Iecb1c8090f5e0be28da8f5181bb35084eb18f67b
Implement getrusage.
These fields of struct rusage are not supported and always set to zero at this time
long ru_nswap; /* swaps */
long ru_inblock; /* block input operations */
long ru_oublock; /* block output operations */
long ru_msgsnd; /* messages sent */
long ru_msgrcv; /* messages received */
long ru_nvcsw; /* voluntary context switches */
long ru_nivcsw; /* involuntary context switches */
test75.c is the unit test for this new function
Change-Id: I3f1eb69de1fce90d087d76773b09021fc6106539
. libc: add vfs_mmap, a way for vfs to initiate mmap()s.
This is a good special case to have as vfs is a slightly
different client from regular user processes. It doesn't do it
for itself, and has the dev & inode info already so the callback
to VFS for the lookup isn't necessary. So it has different info
to have to give to VM.
. libc: also add minix_mmap64() that accepts a 64-bit offset, even
though our off_t is still 32 bit now.
. On exec() time, try to mmap() in the executable if available.
(It is not yet available in this commit.)
. To support mmap(), add do_vm_call that allows VM to lookup
(to ino+dev), do i/o from and close FD's on behalf of other
processes.
Change-Id: I831551e45a6781c74313c450eb9c967a68505932
m_out is shared between threads as the reply message, and it can happen
results get overwritten by another thread before the reply is sent. This
change
. makes m_out local to the message handling function,
declared on the stack of the caller
. forces callers of reply() to give it a message, or
declare the reply message has no significant fields except
for the return code by calling replycode()
Change-Id: Id06300083a63c72c00f34f86a5c7d96e4bbdf9f6
Remove old versions of system calls and system calls that don't have
a libc api interface anymore (dup, dup2, creat).
VFS still contains support for old system call numbers for the new stat
system calls (i.e., 65, 66, 67) to keep supporting old binaries built for
MINIX 3.2.1 (prior to the release).
Change-Id: I721779b58a50c7eeae20669de24658d55d69b25b
.sync and fsync used unnecessarily restrictive locking type
.fsync violated locking order by obtaining a vmnt lock after a filp lock
.fsync contained a TOCTOU bug
.new_node violated locking rules (didn't upgrade lock upon file creation)
.do_pipe used unnecessarily restrictive locking type
.always lock pipes exclusively; even a read operation might require to do
a write on a vnode object (update pipe size)
.when opening a file with O_TRUNC, upgrade vnode lock when truncating
.utime used unnecessarily restrictive locking type
.path parsing:
.always acquire VMNT_WRITE or VMNT_EXCL on vmnt and downgrade to
VMNT_READ if that was what was actually requested. This prevents the
following deadlock scenario:
thread A:
lock_vmnt(vmp, TLL_READSER);
lock_vnode(vp, TLL_READSER);
upgrade_vmnt_lock(vmp, TLL_WRITE);
thread B:
lock_vmnt(vmp, TLL_READ);
lock_vnode(vp, TLL_READSER);
thread A will be stuck in upgrade_vmnt_lock and thread B is stuck in
lock_vnode. This happens when, for example, thread A tries create a
new node (open.c:new_node) and thread B tries to do eat_path to
change dir (stadir.c:do_chdir). When the path is being resolved, a
vnode is always locked with VNODE_OPCL (TLL_READSER) and then
downgraded to VNODE_READ if read-only is actually requested. Thread
A locks the vmnt with VMNT_WRITE (TLL_READSER) which still allows
VMNT_READ locks. Thread B can't acquire a lock on the vnode because
thread A has it; Thread A can't upgrade its vmnt lock to VMNT_WRITE
(TLL_WRITE) because thread B has a VMNT_READ lock on it.
By serializing vmnt locks during path parsing, thread B can only
acquire a lock on vmp when thread A has completely finished its
operation.
Upon reboot VFS semi-exits all processes and unmounts the file system.
However, upon unmount, exiting FUSE file systems might need service from
the file system (due to libc). As the FUSE process is halfway the exit
procedure, it doesn't have a valid root directory and working directory.
Trying to do system calls then triggers a sanity check in VFS.
This fix first exits normal processes which should then allow for
unmounting FUSE file systems. Then VFS exits all processes including
File Servers and unmounts the rest of the file system.
. whenever this function is called, pm will expect
the process to be cleaned up
. so don't abort the process entirely on error
. fixes a later 'forking on top of in-use child' vfs panic
By decoupling synchronous drivers from VFS, we are a big step closer to
supporting driver crashes under all circumstances. That is, VFS can't
become stuck on IPC with a synchronous driver (e.g., INET) and can
recover from crashing block drivers during open/close/ioctl or during
communication with an FS.
In order to maintain serialized communication with a synchronous driver,
the communication is wrapped by a mutex on a per driver basis (not major
numbers as there can be multiple majors with identical endpoints). Majors
that share a driver endpoint point to a single mutex object.
In order to support crashes from block drivers, the file reopen tactic
had to be changed; first reopen files associated with the crashed
driver, then send the new driver endpoint to FSes. This solves a
deadlock between the FS and the block driver;
- VFS would send REQ_NEW_DRIVER to an FS, but he FS only receives it
after retrying the current request to the newly started driver.
- The block driver would refuse the retried request until all files
had been reopened.
- VFS would reopen files only after getting a reply from the initial
REQ_NEW_DRIVER.
When a character special driver crashes, all associated files have to
be marked invalid and closed (or reopened if flagged as such). However,
they can only be closed if a thread holds exclusive access to it. To
obtain exclusive access, the worker thread (which handles the new driver
endpoint event from DS) schedules a new job to garbage collect invalid
files. This way, we can signal the worker thread that was talking to the
crashed driver and will release exclusive access to a file associated
with the crashed driver and prevent the garbage collecting worker thread
from dead locking on that file.
Also, when a character special driver crashes, RS will unmap the driver
and remap it upon restart. During unmapping, associated files are marked
invalid instead of waiting for an endpoint up event from DS, as that
event might come later than new read/write/select requests and thus
cause confusion in the freshly started driver.
When locking a filp, the usage counters are no longer checked. The usage
counter can legally go down to zero during filp invalidation while there
are locks pending.
DS events are handled by a separate worker thread instead of the main
thread as reopening files could lead to another crash and a stuck thread.
An additional worker thread is then necessary to unlock it.
Finally, with everything asynchronous a race condition in do_select
surfaced. A select entry was only marked in use after succesfully sending
initial select requests to drivers and having to wait. When multiple
select() calls were handled there was opportunity that these entries
were overwritten. This had as effect that some select results were
ignored (and select() remained blocking instead if returning) or do_select
tried to access filps that were not present (because thrown away by
secondary select()). This bug manifested itself with sendrecs, but was
very hard to reproduce. However, it became awfully easy to trigger with
asynsends only.
By making m_in job local (i.e., each job has its own copy of m_in instead
of refering to the global m_in) we don't have to store and restore m_in
on every thread yield. This reduces overhead. Moreover, remove the
assumption that m_in is preserved. Do_XXX functions have to copy the
system call parameters as soon as possible and only pass those copies to
other functions.
Furthermore, this patch cleans up some code and uses better types in a lot
of places.
This patch provides basic protection against damage resulting from
differently compiled servers blindly copying tables to one another.
In every getsysinfo() call, the caller is provided with the expected
size of the requested data structure. The callee fails the call if
the expected size does not match the data structure's actual size.
This patch separates the character and block driver communication
protocols. The old character protocol remains the same, but a new
block protocol is introduced. The libdriver library is replaced by
two new libraries: libchardriver and libblockdriver. Their exposed
API, and drivers that use them, have been updated accordingly.
Together, libbdev and libblockdriver now completely abstract away
the message format used by the block protocol. As the memory driver
is both a character and a block device driver, it now implements its
own message loop.
The most important semantic change made to the block protocol is that
it is no longer possible to return both partial results and an error
for a single transfer. This simplifies the interaction between the
caller and the driver, as the I/O vector no longer needs to be copied
back. Also, drivers are now no longer supposed to decide based on the
layout of the I/O vector when a transfer should be cut short. Put
simply, transfers are now supposed to either succeed completely, or
result in an error.
After this patch, the state of the various pieces is as follows:
- block protocol: stable
- libbdev API: stable for synchronous communication
- libblockdriver API: needs slight revision (the drvlib/partition API
in particular; the threading API will also change shortly)
- character protocol: needs cleanup
- libchardriver API: needs cleanup accordingly
- driver restarts: largely unsupported until endpoint changes are
reintroduced
As a side effect, this patch eliminates several bugs, hacks, and gcc
-Wall and -W warnings all over the place. It probably introduces a
few new ones, too.
Update warning: this patch changes the protocol between MFS and disk
drivers, so in order to use old/new images, the MFS from the ramdisk
must be used to mount all file systems.
VFS CHANGES:
- dmap table no longer statically initialized in VFS
- Dropped FSSIGNON svrctl call no longer used by INET
INET CHANGES:
- INET announces its presence to VFS just like any other driver
RS CHANGES:
- The boot image dev table contains all the data to initialize VFS' dmap table
- RS interface supports asynchronous up and update operations now
- RS interface extended to support driver style and flags
SYSLIB CHANGES:
- DS calls to publish / retrieve labels consider endpoints instead of u32_t.
VFS CHANGES:
- mapdriver() only adds an entry in the dmap table in VFS.
- dev_up() is only executed upon reception of a driver up event.
INET CHANGES:
- INET no longer searches for existing drivers instances at startup.
- A newtwork driver is (re)initialized upon reception of a driver up event.
- Networking startup is now race-free by design. No need to waste 5 seconds
at startup any more.
DRIVER CHANGES:
- Every driver publishes driver up events when starting for the first time or
in case of restart when recovery actions must be taken in the upper layers.
- Driver up events are published by drivers through DS.
- For regular drivers, VFS is normally the only subscriber, but not necessarily.
For instance, when the filter driver is in use, it must subscribe to driver
up events to initiate recovery.
- For network drivers, inet is the only subscriber for now.
- Every VFS driver is statically linked with libdriver, every network driver
is statically linked with libnetdriver.
DRIVER LIBRARIES CHANGES:
- Libdriver is extended to provide generic receive() and ds_publish() interfaces
for VFS drivers.
- driver_receive() is a wrapper for sef_receive() also used in driver_task()
to discard spurious messages that were meant to be delivered to a previous
version of the driver.
- driver_receive_mq() is the same as driver_receive() but integrates support
for queued messages.
- driver_announce() publishes a driver up event for VFS drivers and marks
the driver as initialized and expecting a DEV_OPEN message.
- Libnetdriver is introduced to provide similar receive() and ds_publish()
interfaces for network drivers (netdriver_announce() and netdriver_receive()).
- Network drivers all support live update with no state transfer now.
KERNEL CHANGES:
- Added kernel call statectl for state management. Used by driver_announce() to
unblock eventual callers sendrecing to the driver.
this change
- makes panic() variadic, doing full printf() formatting -
no more NO_NUM, and no more separate printf() statements
needed to print extra info (or something in hex) before panicing
- unifies panic() - same panic() name and usage for everyone -
vm, kernel and rest have different names/syntax currently
in order to implement their own luxuries, but no longer
- throws out the 1st argument, to make source less noisy.
the panic() in syslib retrieves the server name from the kernel
so it should be clear enough who is panicing; e.g.
panic("sigaction failed: %d", errno);
looks like:
at_wini(73130): panic: sigaction failed: 0
syslib:panic.c: stacktrace: 0x74dc 0x2025 0x100a
- throws out report() - printf() is more convenient and powerful
- harmonizes/fixes the use of panic() - there were a few places
that used printf-style formatting (didn't work) and newlines
(messes up the formatting) in panic()
- throws out a few per-server panic() functions
- cleans up a tie-in of tty with panic()
merging printf() and panic() statements to be done incrementally.
- VFS: check for negative sizes in all truncate calls
- VFS: update file size after truncating with fcntl(F_FREESP)
- VFS: move pos/len checks for F_FREESP with l_len!=0 from FS to VFS
- MFS: do not zero data block for small files when fully truncating
- MFS: do not write out freed indirect blocks after freeing space
- MFS: make truncate work correctly with differing zone/block sizes
- tests: add new test50 for truncate call family
