Extended by David van Moolenbroek to continue using static buffers
for short inode names, so as to prevent important file system
services such as procfs from running out of memory at runtime.
Change-Id: I6f841741ee9944fc87dbdb78b5cdaa2abee9da76
Previously, procfs would retrieve the rproc and rprocpub tables from
RS in two separate calls. This allowed for a race condition where the
tables could change in between the calls, resulting in a panic in
procfs under certain circumstances. RS now implements a new method
for getsysinfo that allows the retrieval of both tables at once.
Change-Id: I5ec22d25898361270c90e805a43fc6d76ad9e29d
This patch adds support for Unix98 pseudo terminals, that is,
posix_openpt(3), grantpt(3), unlockpt(3), /dev/ptmx, and /dev/pts/.
The latter is implemented with a new pseudo file system, PTYFS.
In effect, this patch adds secure support for unprivileged pseudo
terminal allocation, allowing programs such as tmux(1) to be used by
non-root users as well. Test77 has been extended with new tests, and
no longer needs to run as root.
The new functionality is optional. To revert to the old behavior,
remove the "ptyfs" entry from /etc/fstab.
Technical nodes:
o The reason for not implementing the NetBSD /dev/ptm approach is that
implementing the corresponding ioctl (TIOCPTMGET) would require
adding a number of extremely hairy exceptions to VFS, including the
PTY driver having to create new file descriptors for its own device
nodes.
o PTYFS is required for Unix98 PTYs in order to avoid that the PTY
driver has to be aware of old-style PTY naming schemes and even has
to call chmod(2) on a disk-backed file system. PTY cannot be its
own PTYFS since a character driver may currently not also be a file
system. However, PTYFS may be subsumed into a DEVFS in the future.
o The Unix98 PTY behavior differs somewhat from NetBSD's, in that
slave nodes are created on ptyfs only upon the first call to
grantpt(3). This approach obviates the need to revoke access as
part of the grantpt(3) call.
o Shutting down PTY may leave slave nodes on PTYFS, but once PTY is
restarted, these leftover slave nodes will be removed before they
create a security risk. Unmounting PTYFS will make existing PTY
slaves permanently unavailable, and absence of PTYFS will block
allocation of new Unix98 PTYs until PTYFS is (re)mounted.
Change-Id: I822b43ba32707c8815fd0f7d5bb7a438f51421c1
Previously, services would obtain the user ID of "service" through
getpwnam(3). While this approach is conceptually better, it also
imposes linking against libc which in turn causes problems with
printf(3), which already led to PFS no longer dropping privileges at
all. For now, we hardcode SERVICE_UID and use that instead.
In the future, two changes should allow removal of SERVICE_UID again:
- "service edit" should cause RS to request that a service (such as
PFS) drop privileges through SEF, using the user ID resolved by
service(8), or something similar;
- a future devfs should make it possible for inet to start without
root privileges altogether.
Change-Id: Ie02a1e888cde325806fc0ae76909943ac42c9b96
The new implementation of this library provides abstractions for
network drivers, and should be used for all network drivers from now
on. It provides the following functionality:
- a function call table abstraction, hiding the details of the
datalink protocol with simple parameters;
- a state machine for sending and receiving packets, freeing the
actual driver from keeping track of pending requests;
- an abstraction for copying data from and to the network driver,
freeing the actual driver from dealing with I/O vectors while at
the same time providing a copy implementation which is more
efficient than most current driver implementations;
- a generalized implementation of zero-copy port-based I/O;
- a clearer set of policies and defaults.
While the concept is very similar to lib{block,char,fs,input}driver,
one main difference is that libnetdriver now also takes care of SEF
initialization, mainly so that aspects such as recovery policies and
live-update aspects can be changed for all network drivers in a
single place. As always, for the case that the provided message loop
is too restrictive, a set of more low-level message processing
functions is provided.
The netdriver API has been designed so as to allow alleviation of one
current protocol bottleneck: the fact that at most one send request
and one receive request may be pending at any time. Changing this
aspect will however require a significant rewrite of libnetdriver,
and possibly debugging of drivers that are not able to cope with (in
particular) queuing multiple packets for transmission at once.
Beyond that, the design of the new API is based on the current
protocol, and may be changed/extended later to allow for non-ethernet
network drivers, exposure of link status, multicast address
configuration, suspend and resume, and any other features that are in
fact long overdue.
Change-Id: I47ec47e05852c42f92af04549d41524f928efec2
This patch adds (very limited) support for memory-mapping pages on
file systems that are mounted on the special "none" device and that
do not implement PEEK support by themselves. This includes hgfs,
vbfs, and procfs.
The solution is implemented in libvtreefs, and consists of allocating
pages, filling them with content by calling the file system's READ
functionality, passing the pages to VM, and freeing them again. A new
VM flag is used to indicate that these pages should be mapped in only
once, and thus not cached beyond their single use. This prevents
stale data from getting mapped in without the involvement of the file
system, which would be problematic on file systems where file contents
may become outdated at any time. No VM caching means no sharing and
poor performance, but mmap no longer fails on these file systems.
Compared to a libc-based approach, this patch retains the on-demand
nature of mmap. Especially tail(1) is known to map in a large file
area only to use a small portion of it.
All file systems now need to be given permission for the SETCACHEPAGE
and CLEARCACHE calls to VM.
A very basic regression test is added to test74.
Change-Id: I17afc4cb97315b515cad1542521b98f293b6b559
- rename start_vtreefs to run_vtreefs, since the function returns upon
termination these days;
- add get_inode_slots function to retrieve the number of indexed slots;
- add support for extra per-inode data for arbitrary storage.
Change-Id: If2d365d7b478a1cecc9e20fb2b3e70c1a1cf7243
The entire infrastructure relied on an ACK feature, and as such, it
has been broken for years now, with no easy way to repair it.
Change-Id: I783c2a21276967af115a642199f31fef0f14a572
- synchronize request type with ioctl by making it unsigned long;
- unbreak VFS requests, as they were being sent to PM;
- use proper ioctl direction flags (and new numbers) for requests;
- remove some needless header inclusions;
- svrctl is in libc, make its message name reflect this;
- keep backward compatibility: svrctl is part of the userland ABI.
Change-Id: I44902e8d0d11b8ebc1ef3bda94d2202481743c9b
The new functionality aims to save each file system server from having
to implement its own block I/O routines just so that it can serve as a
root file system. The new source file (bio.c) lists the requirements
that file system servers have to fulfill in order to use the routines.
Change-Id: Ia0190fd5c30e8c2097ed8f4b0e3ccde1827e0b92
The file system may not be expecting these upcalls at arbitrary
moments, while they serve only as a performance optimization anyway.
Change-Id: I0748fd1f6c2645ddbb64466093ee36025aac45e0
This library provides new abstractions for the upper (VFS) side of
file system services, and should be used for all file system service
implementations from now on. It provides the following functionality:
- a function call table abstraction, hiding the details of the
VFS-FS protocol with simple parameters;
- a (currently limited) number of per-function steps required for
all file system implementations, such as copying in and out path
names and result buffers;
- a default implementation for multicomponent path lookups, such
that the file system merely has to implement resolution of single
components at a time;
- an abstraction for copying data from and to the file system, which
allows transparent intraprocess copying as required for the lookup
implementation;
- a set of functions to simplify getdents implementations.
The message loop provided by the library is currently for use by
single-threaded file system implementations only. Multithreaded file
system services may use the more low-level message processing
functionality.
Protocol-level optimizations such as including names in protocol
messages may be hidden entirely in this library. In addition, in the
future, the lookup implementation may be replaced by a single-
component lookup VFS/FS protocol request as part of a VFS name cache
implementation; this, too, can be hidden entirely in this library.
Change-Id: Ib34f0d0e021dfa3426ce8826efcf3eaa94d3ef3e
. get rid of includes in libcompat_minix:
. move configfile.h to minix/include/
. all others are unneeded as they point to other files
. merge the .c files with libc
Change-Id: I5e840c66fb9bc484f377926aa9d66473bbd16259
This concerns all services, a.k.a drivers, filesystem drivers, network
(inet, lwip, uds) servers, and the system servers.
Change-Id: I626fd15c795e15af42df2d10d47fb4a703665d63